summaryrefslogtreecommitdiffstats
path: root/.Slic3r/print
Commit message (Expand)AuthorAgeFilesLines
* Base: Reduce speeds to 20Patrick McDermott2019-10-191-10/+10
* Base: Reduce speeds to 40Patrick McDermott2019-10-191-8/+8
* Base: Reduce top, bottom, and bridge speeds to 60Patrick McDermott2019-10-191-5/+5
* Base: Reduce top, bottom, and bridge speeds to 80Patrick McDermott2019-10-191-4/+4
* Revert "Base: Slow down first layer"Patrick McDermott2019-10-191-2/+2
* Base: Slow down first layerPatrick McDermott2019-10-191-2/+2
* Base: Set bridge speed to 100Patrick McDermott2019-10-191-2/+2
* Base: Raise perimeter and solid fill speeds to 100Patrick McDermott2019-10-191-6/+6
* Base: Decrease fill density to 10%Patrick McDermott2019-10-191-2/+2
* Base: Disable ineffective infill combinationPatrick McDermott2019-10-191-2/+2
* Revert "Base: Reduce layer height to 0.2 mm"Patrick McDermott2019-10-181-3/+3
* Base: Reduce layer height to 0.2 mmPatrick McDermott2019-10-181-3/+3
* Base: Raise perimeter and top infill speeds to 80Patrick McDermott2019-10-181-5/+5
* Base: Increase infill to 20%P. J. McDermott2019-02-161-2/+2
* Revert "Base: Increase solid infill speed"P. J. McDermott2019-02-161-2/+2
* Base: Increase solid infill speedP. J. McDermott2019-02-161-2/+2
* Revert "Revert "Base: Reduce infill overlap to 0""P. J. McDermott2019-02-151-2/+2
* Revert "Base: Reduce infill overlap to 0"P. J. McDermott2019-02-151-2/+2
* Base: Reduce infill overlap to 0P. J. McDermott2019-02-151-2/+2
* Base: Slow down perimeters, speed up infillP. J. McDermott2019-02-141-8/+8
* Base: Infill everywhereP. J. McDermott2019-02-141-2/+2
* Revert "Revert "Revert "Base: Increase speeds"""P. J. McDermott2019-02-141-11/+11
* Revert "Revert "Base: Increase speeds""P. J. McDermott2019-02-141-11/+11
* Revert "Base: Increase minimum skirt length"P. J. McDermott2019-02-141-1/+1
* Revert "Base: Increase speeds"P. J. McDermott2019-02-141-11/+11
* Base: Increase speedsP. J. McDermott2019-02-141-11/+11
* Base: Reduce solid infill threshold areaP. J. McDermott2019-02-141-2/+2
* Base: Increase minimum skirt lengthP. J. McDermott2019-02-141-2/+2
* Base: Reduce infill/perimeters overlapP. J. McDermott2019-02-141-2/+2
* Base: Run 4 threadsP. J. McDermott2019-02-141-2/+2
* Base: Combine infill and only infill where neededP. J. McDermott2019-02-141-3/+3
* Base: Increase speedsP. J. McDermott2019-02-141-8/+8
* TAZ 6, SE v2.1, eSUN PLA; Base: Lift on retract, increase travel speedP. J. McDermott2019-02-141-2/+2
* Base: Increase travel speedP. J. McDermott2019-02-131-2/+2
* Base: New print preset, based on SFF-8201 HAP. J. McDermott2019-02-131-0/+86
* print: Slow down perimeter print speedsP. J. McDermott2017-08-211-5/+5
* print: Generate verbose (commented) G-codeP. J. McDermott2017-08-211-2/+2
* print: Add infill and double print speedsP. J. McDermott2017-08-211-10/+10
* print: Reduce skirt distanceprint-v2P. J. McDermott2017-08-211-2/+2
* print: Increase all print speeds to 40 mm/sP. J. McDermott2017-08-211-7/+7
* print: Reduce perimeters and top/bottom solid layers to 2P. J. McDermott2017-08-211-4/+4
* print: Add new presetP. J. McDermott2017-08-212-18/+86
* Add printer settingsP. J. McDermott2016-04-101-0/+18