diff options
| author | Patrick McDermott <patrick.mcdermott@libiquity.com> | 2019-10-18 23:32:21 (EDT) |
|---|---|---|
| committer | Patrick McDermott <patrick.mcdermott@libiquity.com> | 2019-10-18 23:32:47 (EDT) |
| commit | ab84e54274cf87f575ff1436b064ac52df3f9ad9 (patch) | |
| tree | cbdf73c9388c919e82fb925613f69dcb8a352675 /.Slic3r/print | |
| parent | e44dda2e8acba55dc611d68e59a6a34360c6719e (diff) | |
| download | slic3r-ab84e54274cf87f575ff1436b064ac52df3f9ad9.zip slic3r-ab84e54274cf87f575ff1436b064ac52df3f9ad9.tar.gz slic3r-ab84e54274cf87f575ff1436b064ac52df3f9ad9.tar.bz2 | |
Base: Reduce layer height to 0.2 mm
Now infill_every_layers is actually effective.
Diffstat (limited to '.Slic3r/print')
| -rw-r--r-- | .Slic3r/print/Base.ini | 6 |
1 files changed, 3 insertions, 3 deletions
diff --git a/.Slic3r/print/Base.ini b/.Slic3r/print/Base.ini index d7cff46..8ae8306 100644 --- a/.Slic3r/print/Base.ini +++ b/.Slic3r/print/Base.ini @@ -1,4 +1,4 @@ -# generated by Slic3r 1.2.9 on Fri Oct 18 22:42:49 2019 +# generated by Slic3r 1.2.9 on Fri Oct 18 23:28:52 2019 avoid_crossing_perimeters = 0 bottom_solid_layers = 2 bridge_acceleration = 0 @@ -21,7 +21,7 @@ fill_density = 20% fill_pattern = rectilinear first_layer_acceleration = 0 first_layer_extrusion_width = 0 -first_layer_height = 0.25 +first_layer_height = 0.2 first_layer_speed = 100% gap_fill_speed = 40 gcode_comments = 1 @@ -34,7 +34,7 @@ infill_only_where_needed = 0 infill_overlap = 0 infill_speed = 100 interface_shells = 0 -layer_height = 0.25 +layer_height = 0.2 max_print_speed = 80 max_volumetric_speed = 0 min_skirt_length = 5 |