diff options
| author | P. J. McDermott <pj@pehjota.net> | 2017-08-21 16:25:05 (EDT) |
|---|---|---|
| committer | P. J. McDermott <pj@pehjota.net> | 2017-08-21 16:27:04 (EDT) |
| commit | f17d045bdccd52c12e16bcb0e61e710a09f6fbb7 (patch) | |
| tree | 9f950d126b12535805360f2a1cd914ac01558c31 /.Slic3r/print | |
| parent | 2da8ca4e9da953430c38f7a79e9c8d94aa844a66 (diff) | |
| download | slic3r-f17d045bdccd52c12e16bcb0e61e710a09f6fbb7.zip slic3r-f17d045bdccd52c12e16bcb0e61e710a09f6fbb7.tar.gz slic3r-f17d045bdccd52c12e16bcb0e61e710a09f6fbb7.tar.bz2 | |
print: Slow down perimeter print speeds
Loading two SFF-8201 HAs into Printrun, before:
Estimated duration: 11 layers, 0:18:04
Loading two SFF-8201 HAs into Printrun, after:
Estimated duration: 11 layers, 0:19:49
Diffstat (limited to '.Slic3r/print')
| -rw-r--r-- | .Slic3r/print/SFF-8201 HA.ini | 10 |
1 files changed, 5 insertions, 5 deletions
diff --git a/.Slic3r/print/SFF-8201 HA.ini b/.Slic3r/print/SFF-8201 HA.ini index 948e29a..a439a2a 100644 --- a/.Slic3r/print/SFF-8201 HA.ini +++ b/.Slic3r/print/SFF-8201 HA.ini @@ -1,4 +1,4 @@ -# generated by Slic3r 1.2.9 on Mon Aug 21 16:13:46 2017 +# generated by Slic3r 1.2.9 on Mon Aug 21 16:25:03 2017 avoid_crossing_perimeters = 0 bottom_solid_layers = 2 bridge_acceleration = 0 @@ -10,7 +10,7 @@ default_acceleration = 0 dont_support_bridges = 1 external_fill_pattern = rectilinear external_perimeter_extrusion_width = 0 -external_perimeter_speed = 80 +external_perimeter_speed = 60 external_perimeters_first = 0 extra_perimeters = 1 extruder_clearance_height = 20 @@ -22,7 +22,7 @@ fill_pattern = rectilinear first_layer_acceleration = 0 first_layer_extrusion_width = 0 first_layer_height = 0.25 -first_layer_speed = 80 +first_layer_speed = 100% gap_fill_speed = 20 gcode_comments = 1 infill_acceleration = 0 @@ -46,7 +46,7 @@ overhangs = 1 perimeter_acceleration = 0 perimeter_extruder = 1 perimeter_extrusion_width = 0 -perimeter_speed = 80 +perimeter_speed = 60 perimeters = 2 post_process = raft_layers = 0 @@ -55,7 +55,7 @@ seam_position = aligned skirt_distance = 5 skirt_height = 1 skirts = 1 -small_perimeter_speed = 80 +small_perimeter_speed = 60 solid_infill_below_area = 70 solid_infill_every_layers = 0 solid_infill_extruder = 1 |