diff options
Diffstat (limited to '.Slic3r/printer/LulzBot TAZ 6, Single Extruder v2.1, PLA - start.gcode')
| -rw-r--r-- | .Slic3r/printer/LulzBot TAZ 6, Single Extruder v2.1, PLA - start.gcode | 128 |
1 files changed, 0 insertions, 128 deletions
diff --git a/.Slic3r/printer/LulzBot TAZ 6, Single Extruder v2.1, PLA - start.gcode b/.Slic3r/printer/LulzBot TAZ 6, Single Extruder v2.1, PLA - start.gcode deleted file mode 100644 index 7d3b098..0000000 --- a/.Slic3r/printer/LulzBot TAZ 6, Single Extruder v2.1, PLA - start.gcode +++ /dev/null @@ -1,128 +0,0 @@ - -; Input file name: [input_filename] -; Printer preset: [printer_preset] -; Filament preset: [filament_preset] -; Print preset: [print_preset] - -;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; -;; Begin LulzBot TAZ 6 Single Extruder v2.1 PLA start G-code ;; -;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; - -; -; Initialization, homing, and retraction -; - -; Set units, positioning modes, and extruder origin -M73 P0 ; Set LCD print progress to 0% -M75 ; Start print job timer -G26 ; Clear any "PROBE FAIL" (needed? see T372) -G90 ; Set absolute positioning mode -M204 S500 ; Set acceleration -M82 ; Set E absolute mode (override G91) -G92 E0 ; Set extruder position to 0 (origin) -M420 S0 ; Disable bed leveling with previous matrix - -; Begin heating hotend to retraction temperature -M107 ; Turn off the print cooling fan -M104 S140 ; XXX: MATERIAL-DEPENDENT ; Set hotend temperature without waiting -M140 S[first_layer_bed_temperature] ; Set bed temperature without waiting - -; While waiting for the hotend to heat, auto-home the axes -M117 Homing all axes... -G28 ; Auto-home all axes -M109 R140 ; XXX: MATERIAL-DEPENDENT ; Wait for hotend temperature - -; Retract filament before wiping -M117 Retracting... -G1 E-30 F100 ; Retract filament - -; -; Wiping -; - -; Begin heating hotend to wiping temperature -M104 S140 ; XXX: MATERIAL-DEPENDENT ; Set hotend temperature without waiting -M400 ; Don't show status until retracted - -; While waiting for the hotend to heat, position the nozzle over the wiping pad -M117 Moving to wipe... -G1 X-15 Y100 F3000 ; Move nozzle over wiping pad -M109 R140 ; XXX: MATERIAL-DEPENDENT ; Wait for hotend temperature - -; Wipe the nozzle -M117 Wiping... -G1 Z1 F3000 ; Push nozzle into wiping pad -G1 X-17 Y95 F1000 -G1 X-17 Y90 F1000 -G1 X-17 Y85 F1000 -G1 X-15 Y90 F1000 -G1 X-17 Y80 F1000 -G1 X-15 Y95 F1000 -G1 X-17 Y75 F2000 -G1 X-15 Y65 F2000 -G1 X-17 Y70 F2000 -G1 X-15 Y60 F2000 -G1 X-17 Y55 F2000 -G1 X-15 Y50 F2000 -G1 X-17 Y40 F2000 -G1 X-15 Y45 F2000 -G1 X-17 Y35 F2000 -G1 X-15 Y40 F2000 -G1 X-17 Y70 F2000 -G1 X-15 Y30 Z2 F2000 -G1 X-17 Y35 F2000 -G1 X-15 Y25 F2000 -G1 X-17 Y30 F2000 -G1 X-15 Y25 Z1.5 F1000 -G1 X-17 Y23 F1000 -G1 Z10 F1000 ; Lift out of wiping pad -M400 ; Don't heat or show status until wiped - -; -; Probing -; - -; Begin heating hotend to probing temperature -M104 S140 ; XXX: MATERIAL-DEPENDENT ; Set hotend temperature without waiting - -; While waiting for the hotend to heat, move over first probe washer -M117 Moving to probe... -G1 X-9 Y-9 ; Move over rear left bed-leveling washer -M400 ; Don't show status until moved -M109 R140 ; XXX: MATERIAL-DEPENDENT ; Wait for hotend temperature - -; Probe the bed and enable bed-leveling compensation -M117 Probing bed... -M204 S100 ; Set acceleration for probing moves -G29 ; Probe the bed -M204 S500 ; Set acceleration back to normal -M420 S1 ; Enable bed leveling with new matrix -G1 Z10 F5000 ; Lift off the bed-leveling washer - -; -; Printing -; - -; Begin heating hotend to first layer temperature -M104 S[first_layer_temperature] ; Set hotend temperature without waiting -M400 ; Don't show status until done probing - -; While waiting for the hotend to heat, position the nozzle and pause -M117 Moving to center... -G1 X140 Y140 Z2 F5000 ; Move to center -M400 ; Don't show status until centered - -; Ensure the hotend and bed are at the first layer temperatures -M109 R205 ; XXX: MATERIAL-DEPENDENT ; Wait for hotend temperature -M190 ; Wait for bed temperature - -; Extrude filament back into the nozzle -M117 Priming nozzle... -G1 E0 F75 ; Slowly extrude filament back into nozzle -M400 ; Don't show status until primed -M117 Printing... - -;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; -;; End LulzBot TAZ 6 Single Extruder v2.1 PLA start G-code ;; -;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; - |