printer: Remove filament from TAZ 6 G-code file names

1 files changed, 0 insertions, 128 deletions

diff --git a/.Slic3r/printer/LulzBot TAZ 6, Single Extruder v2.1, PLA - start.gcode b/.Slic3r/printer/LulzBot TAZ 6, Single Extruder v2.1, PLA - start.gcode
deleted file mode 100644
index 7d3b098..0000000
--- a/.Slic3r/printer/LulzBot TAZ 6, Single Extruder v2.1, PLA - start.gcode
+++ /dev/null
@@ -1,128 +0,0 @@
-
-; Input file name: [input_filename]
-; Printer preset: [printer_preset]
-; Filament preset: [filament_preset]
-; Print preset: [print_preset]
-
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-;; Begin LulzBot TAZ 6 Single Extruder v2.1 PLA start G-code ;;
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-
-;
-; Initialization, homing, and retraction
-;
-
-; Set units, positioning modes, and extruder origin
-M73 P0                               ; Set LCD print progress to 0%
-M75                                  ; Start print job timer
-G26                                  ; Clear any "PROBE FAIL" (needed? see T372)
-G90                                  ; Set absolute positioning mode
-M204 S500                            ; Set acceleration
-M82                                  ; Set E absolute mode (override G91)
-G92 E0                               ; Set extruder position to 0 (origin)
-M420 S0                              ; Disable bed leveling with previous matrix
-
-; Begin heating hotend to retraction temperature
-M107                                 ; Turn off the print cooling fan
-M104 S140 ; XXX: MATERIAL-DEPENDENT  ; Set hotend temperature without waiting
-M140 S[first_layer_bed_temperature]  ; Set bed temperature without waiting
-
-; While waiting for the hotend to heat, auto-home the axes
-M117 Homing all axes...
-G28                                  ; Auto-home all axes
-M109 R140 ; XXX: MATERIAL-DEPENDENT  ; Wait for hotend temperature
-
-; Retract filament before wiping
-M117 Retracting...
-G1 E-30 F100                         ; Retract filament
-
-;
-; Wiping
-;
-
-; Begin heating hotend to wiping temperature
-M104 S140 ; XXX: MATERIAL-DEPENDENT  ; Set hotend temperature without waiting
-M400                                 ; Don't show status until retracted
-
-; While waiting for the hotend to heat, position the nozzle over the wiping pad
-M117 Moving to wipe...
-G1 X-15 Y100 F3000                   ; Move nozzle over wiping pad
-M109 R140 ; XXX: MATERIAL-DEPENDENT  ; Wait for hotend temperature
-
-; Wipe the nozzle
-M117 Wiping...
-G1           Z1   F3000              ; Push nozzle into wiping pad
-G1 X-17 Y95       F1000
-G1 X-17 Y90       F1000
-G1 X-17 Y85       F1000
-G1 X-15 Y90       F1000
-G1 X-17 Y80       F1000
-G1 X-15 Y95       F1000
-G1 X-17 Y75       F2000
-G1 X-15 Y65       F2000
-G1 X-17 Y70       F2000
-G1 X-15 Y60       F2000
-G1 X-17 Y55       F2000
-G1 X-15 Y50       F2000
-G1 X-17 Y40       F2000
-G1 X-15 Y45       F2000
-G1 X-17 Y35       F2000
-G1 X-15 Y40       F2000
-G1 X-17 Y70       F2000
-G1 X-15 Y30  Z2   F2000
-G1 X-17 Y35       F2000
-G1 X-15 Y25       F2000
-G1 X-17 Y30       F2000
-G1 X-15 Y25  Z1.5 F1000
-G1 X-17 Y23       F1000
-G1          Z10   F1000              ; Lift out of wiping pad
-M400                                 ; Don't heat or show status until wiped
-
-;
-; Probing
-;
-
-; Begin heating hotend to probing temperature
-M104 S140 ; XXX: MATERIAL-DEPENDENT  ; Set hotend temperature without waiting
-
-; While waiting for the hotend to heat, move over first probe washer
-M117 Moving to probe...
-G1 X-9 Y-9                           ; Move over rear left bed-leveling washer
-M400                                 ; Don't show status until moved
-M109 R140 ; XXX: MATERIAL-DEPENDENT  ; Wait for hotend temperature
-
-; Probe the bed and enable bed-leveling compensation
-M117 Probing bed...
-M204 S100                            ; Set acceleration for probing moves
-G29                                  ; Probe the bed
-M204 S500                            ; Set acceleration back to normal
-M420 S1                              ; Enable bed leveling with new matrix
-G1 Z10 F5000                         ; Lift off the bed-leveling washer
-
-;
-; Printing
-;
-
-; Begin heating hotend to first layer temperature
-M104 S[first_layer_temperature]      ; Set hotend temperature without waiting
-M400                                 ; Don't show status until done probing
-
-; While waiting for the hotend to heat, position the nozzle and pause
-M117 Moving to center...
-G1 X140 Y140 Z2 F5000                ; Move to center
-M400                                 ; Don't show status until centered
-
-; Ensure the hotend and bed are at the first layer temperatures
-M109 R205 ; XXX: MATERIAL-DEPENDENT  ; Wait for hotend temperature
-M190                                 ; Wait for bed temperature
-
-; Extrude filament back into the nozzle
-M117 Priming nozzle...
-G1 E0 F75                            ; Slowly extrude filament back into nozzle
-M400                                 ; Don't show status until primed
-M117 Printing...
-
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-;; End LulzBot TAZ 6 Single Extruder v2.1 PLA start G-code ;;
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-