diff options
Diffstat (limited to '.Slic3r/print/SFF-8201 HA, 4-mm skirt, 40 mm per s.ini')
| -rw-r--r-- | .Slic3r/print/SFF-8201 HA, 4-mm skirt, 40 mm per s.ini | 86 |
1 files changed, 0 insertions, 86 deletions
diff --git a/.Slic3r/print/SFF-8201 HA, 4-mm skirt, 40 mm per s.ini b/.Slic3r/print/SFF-8201 HA, 4-mm skirt, 40 mm per s.ini deleted file mode 100644 index c211c2b..0000000 --- a/.Slic3r/print/SFF-8201 HA, 4-mm skirt, 40 mm per s.ini +++ /dev/null @@ -1,86 +0,0 @@ -# generated by Slic3r 1.2.9 on Wed Aug 16 19:12:33 2017 -avoid_crossing_perimeters = 0 -bottom_solid_layers = 2 -bridge_acceleration = 0 -bridge_flow_ratio = 1 -bridge_speed = 60 -brim_width = 0 -complete_objects = 0 -default_acceleration = 0 -dont_support_bridges = 1 -external_fill_pattern = rectilinear -external_perimeter_extrusion_width = 0 -external_perimeter_speed = 40 -external_perimeters_first = 0 -extra_perimeters = 1 -extruder_clearance_height = 20 -extruder_clearance_radius = 20 -extrusion_width = 0.5 -fill_angle = 45 -fill_density = 0% -fill_pattern = rectilinear -first_layer_acceleration = 0 -first_layer_extrusion_width = 0 -first_layer_height = 0.25 -first_layer_speed = 30 -gap_fill_speed = 20 -gcode_comments = 0 -infill_acceleration = 0 -infill_every_layers = 1 -infill_extruder = 1 -infill_extrusion_width = 0 -infill_first = 0 -infill_only_where_needed = 0 -infill_overlap = 15% -infill_speed = 40 -interface_shells = 0 -layer_height = 0.25 -max_print_speed = 80 -max_volumetric_speed = 0 -min_skirt_length = 5 -notes = -only_retract_when_crossing_perimeters = 1 -ooze_prevention = 0 -output_filename_format = [input_filename_base].gcode -overhangs = 1 -perimeter_acceleration = 0 -perimeter_extruder = 1 -perimeter_extrusion_width = 0 -perimeter_speed = 40 -perimeters = 2 -post_process = -raft_layers = 0 -resolution = 0 -seam_position = aligned -skirt_distance = 4 -skirt_height = 1 -skirts = 1 -small_perimeter_speed = 40 -solid_infill_below_area = 70 -solid_infill_every_layers = 0 -solid_infill_extruder = 1 -solid_infill_extrusion_width = 0 -solid_infill_speed = 40 -spiral_vase = 0 -standby_temperature_delta = -5 -support_material = 0 -support_material_angle = 0 -support_material_contact_distance = 0.2 -support_material_enforce_layers = 0 -support_material_extruder = 1 -support_material_extrusion_width = 0 -support_material_interface_extruder = 1 -support_material_interface_layers = 3 -support_material_interface_spacing = 0 -support_material_interface_speed = 100% -support_material_pattern = pillars -support_material_spacing = 2.5 -support_material_speed = 60 -support_material_threshold = 0 -thin_walls = 1 -threads = 2 -top_infill_extrusion_width = 0 -top_solid_infill_speed = 40 -top_solid_layers = 2 -travel_speed = 130 -xy_size_compensation = 0 |