diff options
Diffstat (limited to '.Slic3r/print')
| -rw-r--r-- | .Slic3r/print/SFF-8201 HA.ini (renamed from .Slic3r/print/SFF-8201 HA, 4-mm skirt, 40 mm per s.ini) | 20 |
1 files changed, 10 insertions, 10 deletions
diff --git a/.Slic3r/print/SFF-8201 HA, 4-mm skirt, 40 mm per s.ini b/.Slic3r/print/SFF-8201 HA.ini index c211c2b..ef1cbb5 100644 --- a/.Slic3r/print/SFF-8201 HA, 4-mm skirt, 40 mm per s.ini +++ b/.Slic3r/print/SFF-8201 HA.ini @@ -1,4 +1,4 @@ -# generated by Slic3r 1.2.9 on Wed Aug 16 19:12:33 2017 +# generated by Slic3r 1.2.9 on Mon Aug 21 11:55:12 2017 avoid_crossing_perimeters = 0 bottom_solid_layers = 2 bridge_acceleration = 0 @@ -10,19 +10,19 @@ default_acceleration = 0 dont_support_bridges = 1 external_fill_pattern = rectilinear external_perimeter_extrusion_width = 0 -external_perimeter_speed = 40 +external_perimeter_speed = 80 external_perimeters_first = 0 extra_perimeters = 1 extruder_clearance_height = 20 extruder_clearance_radius = 20 extrusion_width = 0.5 fill_angle = 45 -fill_density = 0% +fill_density = 10% fill_pattern = rectilinear first_layer_acceleration = 0 first_layer_extrusion_width = 0 first_layer_height = 0.25 -first_layer_speed = 30 +first_layer_speed = 80 gap_fill_speed = 20 gcode_comments = 0 infill_acceleration = 0 @@ -32,7 +32,7 @@ infill_extrusion_width = 0 infill_first = 0 infill_only_where_needed = 0 infill_overlap = 15% -infill_speed = 40 +infill_speed = 80 interface_shells = 0 layer_height = 0.25 max_print_speed = 80 @@ -46,21 +46,21 @@ overhangs = 1 perimeter_acceleration = 0 perimeter_extruder = 1 perimeter_extrusion_width = 0 -perimeter_speed = 40 +perimeter_speed = 80 perimeters = 2 post_process = raft_layers = 0 resolution = 0 seam_position = aligned -skirt_distance = 4 +skirt_distance = 5 skirt_height = 1 skirts = 1 -small_perimeter_speed = 40 +small_perimeter_speed = 80 solid_infill_below_area = 70 solid_infill_every_layers = 0 solid_infill_extruder = 1 solid_infill_extrusion_width = 0 -solid_infill_speed = 40 +solid_infill_speed = 80 spiral_vase = 0 standby_temperature_delta = -5 support_material = 0 @@ -80,7 +80,7 @@ support_material_threshold = 0 thin_walls = 1 threads = 2 top_infill_extrusion_width = 0 -top_solid_infill_speed = 40 +top_solid_infill_speed = 80 top_solid_layers = 2 travel_speed = 130 xy_size_compensation = 0 |