TAZ 6, DE v3, eSUN HIPS: Add second extruder

1 files changed, 12 insertions, 12 deletions

diff --git a/.Slic3r/printer/LulzBot TAZ 6, Dual Extruder v3, eSUN HIPS.ini b/.Slic3r/printer/LulzBot TAZ 6, Dual Extruder v3, eSUN HIPS.ini
index ae00815..75a951b 100644
--- a/.Slic3r/printer/LulzBot TAZ 6, Dual Extruder v3, eSUN HIPS.ini
+++ b/.Slic3r/printer/LulzBot TAZ 6, Dual Extruder v3, eSUN HIPS.ini
@@ -1,27 +1,27 @@
-# generated by Slic3r 1.2.9 on Wed Feb 20 19:03:11 2019
+# generated by Slic3r 1.2.9 on Wed Feb 20 19:22:45 2019
 bed_shape = 0x0,280x0,280x280,0x280
 before_layer_gcode = 
 end_gcode = \n;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;\n;; Begin LulzBot TAZ 6 Single Extruder v2.1 end G-code ;;\n;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;\n\n; Ensure moves are complete\nM400                                 ; Pause processing until moves complete\n\n; Begin cooling\nM104 S150       ; Cool hotend to retraction without waiting\nM140 S50      ; Cool bed to removal temp without waiting\nM107                                 ; Turn off the print cooling fan\n\n; Retract and re-prime filament\nG91                                  ; Make below Z and E movements relative\nG1     E-1  F300                     ; Retract some filament from the nozzle\nG1 Z20 E-5 F3000                     ; Lift nozzle and retract more filament\nG1      E6 F3000                     ; Re-prime nozzle (T584)\nG90                                  ; Restore absolute positioning mode\n\n; Cool bed\nM117 Moving to cool...\nG1 Y0 F3000                          ; Move bed to cooling position\nM400                                 ; Don't show status until moved\nM190 R50      ; Wait for bed to cool\n\n; Move to print removal position\nM117 Printing complete\nG1 X-19 Y280 F3000                   ; Move bed forward and toolhead left\nM84                                  ; Turn off stepper motors (implicit M400)\nM77                                  ; Stop print job timer\nM300 P200                            ; Beep\n\n; Optionally keep hotend and bed warm\nM104 S0                              ; Cool hotend without waiting\nM140 S0                              ; Cool bed without waiting\nM0 Done, keep warm?\nM104 S150       ; Set hotend to retraction without waiting\nM140 S50      ; Set bed to removal temp without waiting\n\n;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;\n;; End LulzBot TAZ 6 Single Extruder v2.1 end G-code ;;\n;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;\n
-extruder_offset = 0x0
+extruder_offset = 0x0,0x0
 gcode_flavor = reprap
 layer_gcode = 
-nozzle_diameter = 0.5
+nozzle_diameter = 0.5,0.5
 octoprint_apikey = 
 octoprint_host = 
 pressure_advance = 0
-retract_before_travel = 2
-retract_layer_change = 1
-retract_length = 1
-retract_length_toolchange = 10
-retract_lift = 0.2
-retract_restart_extra = 0
-retract_restart_extra_toolchange = 0
-retract_speed = 40
+retract_before_travel = 2,2
+retract_layer_change = 1,1
+retract_length = 1,1
+retract_length_toolchange = 10,10
+retract_lift = 0.2,0.2
+retract_restart_extra = 0,0
+retract_restart_extra_toolchange = 0,0
+retract_speed = 40,40
 start_gcode = \n; Input file name: [input_filename]\n; Printer preset: [printer_preset]\n; Filament preset: [filament_preset]\n; Print preset: [print_preset]\n\n;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;\n;; Begin LulzBot TAZ 6 Single Extruder v2.1 start G-code ;;\n;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;\n\n;\n; Initialization, homing, and retraction\n;\n\n; Set units, positioning modes, and extruder origin\nM73 P0                               ; Set LCD print progress to 0%\nM75                                  ; Start print job timer\nG26                                  ; Clear any "PROBE FAIL" (needed? see T372)\nG90                                  ; Set absolute positioning mode\nM204 S500                            ; Set acceleration\nM82                                  ; Set E absolute mode (override G91)\nG92 E0                               ; Set extruder position to 0 (origin)\nM420 S0                              ; Disable bed leveling with previous matrix\n\n; Begin heating hotend to retraction temperature\nM107                                 ; Turn off the print cooling fan\nM104 S150       ; Set hotend temperature without waiting\nM140 S[first_layer_bed_temperature]  ; Set bed temperature without waiting\n\n; While waiting for the hotend to heat, auto-home the axes\nM117 Homing all axes...\nG28                                  ; Auto-home all axes\nM109 R150       ; Wait for hotend temperature\n\n; Retract filament and move Y toward wiping pad (Z_SAFE_HOMING_Y_POINT - 30 mm)\nM117 Retracting...\nG1 Y228 E-30 F100                    ; Retract and move toward wiping pad\n\n;\n; Wiping\n;\n\n; Begin heating hotend to wiping temperature\nM104 S170           ; Set hotend temperature without waiting\nM400                                 ; Don't show status until retracted\n\n; While waiting for the hotend to heat, position the nozzle over the wiping pad\nM117 Moving to wipe...\nG1 X-15 Y100 F3000                   ; Move nozzle over wiping pad\nM109 R170           ; Wait for hotend temperature\n\n; Wipe the nozzle\nM117 Wiping nozzle...\nG1           Z1   F3000              ; Push nozzle into wiping pad\nG1 X-17 Y95       F1000\nG1 X-17 Y90       F1000\nG1 X-17 Y85       F1000\nG1 X-15 Y90       F1000\nG1 X-17 Y80       F1000\nG1 X-15 Y95       F1000\nG1 X-17 Y75       F2000\nG1 X-15 Y65       F2000\nG1 X-17 Y70       F2000\nG1 X-15 Y60       F2000\nG1 X-17 Y55       F2000\nG1 X-15 Y50       F2000\nG1 X-17 Y40       F2000\nG1 X-15 Y45       F2000\nG1 X-17 Y35       F2000\nG1 X-15 Y40       F2000\nG1 X-17 Y70       F2000\nG1 X-15 Y30  Z2   F2000\nG1 X-17 Y35       F2000\nG1 X-15 Y25       F2000\nG1 X-17 Y30       F2000\nG1 X-15 Y25  Z1.5 F1000\nG1 X-17 Y23       F1000\nG1          Z10   F1000              ; Lift out of wiping pad\nM400                                 ; Don't heat or show status until wiped\n\n;\n; Probing\n;\n\n; Begin heating hotend to probing temperature\nM104 S170          ; Set hotend temperature without waiting\n\n; While waiting for the hotend to heat, move over first probe washer\nM117 Moving to probe...\nG1 X-9 Y-9                           ; Move over rear left bed-leveling washer\nM400                                 ; Don't show status until moved\nM109 R170          ; Wait for hotend temperature\n\n; Probe the bed and enable bed-leveling compensation\nM117 Probing bed...\nM204 S100                            ; Set acceleration for probing moves\nG29                                  ; Probe the bed\nM204 S500                            ; Set acceleration back to normal\nM420 S1                              ; Enable bed leveling with new matrix\nG1 Z10 F5000                         ; Lift off the bed-leveling washer\n\n;\n; Printing\n;\n\n; Begin heating hotend to first layer temperature\nM104 S[first_layer_temperature]      ; Set hotend temperature without waiting\nM400                                 ; Don't show status until done probing\n\n; While waiting for the hotend to heat, position the nozzle and pause\nM117 Moving off probe...\nG1 X0 Y0 Z15 F5000                   ; Move above and away from last washer\nM400                                 ; Don't show status until centered\n\n; Ensure the hotend and bed are at the first layer temperatures\nM109 R[first_layer_temperature]      ; Wait for hotend temperature\nM190 S[first_layer_bed_temperature]  ; Wait for bed temperature\n\n; Extrude filament back into the nozzle\nM117 Priming nozzle...\nG1 Z2 E0 F75                         ; Slowly extrude filament back into nozzle\nM400                                 ; Don't show status until primed\nM117 Printing...\n\n;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;\n;; End LulzBot TAZ 6 Single Extruder v2.1 start G-code ;;\n;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;\n
 toolchange_gcode = 
 use_firmware_retraction = 0
 use_relative_e_distances = 0
 use_volumetric_e = 0
 vibration_limit = 0
-wipe = 0
+wipe = 0,0
 z_offset = 0