TAZ 6, DE v3, eSUN HIPS: New printer

4 files changed, 201 insertions, 2 deletions

diff --git a/.Slic3r/printer/LulzBot TAZ 6, Dual Extruder v3 - end.gcode b/.Slic3r/printer/LulzBot TAZ 6, Dual Extruder v3 - end.gcode
new file mode 100644
index 0000000..73021de
--- /dev/null
+++ b/.Slic3r/printer/LulzBot TAZ 6, Dual Extruder v3 - end.gcode
@@ -0,0 +1,44 @@
+
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+;; Begin LulzBot TAZ 6 Single Extruder v2.1 end G-code ;;
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+
+; Ensure moves are complete
+M400                                 ; Pause processing until moves complete
+
+; Begin cooling
+M104 S<retraction_temperature>       ; Cool hotend to retraction without waiting
+M140 S<removal_bed_temperature>      ; Cool bed to removal temp without waiting
+M107                                 ; Turn off the print cooling fan
+
+; Retract and re-prime filament
+G91                                  ; Make below Z and E movements relative
+G1     E-1  F300                     ; Retract some filament from the nozzle
+G1 Z20 E-5 F3000                     ; Lift nozzle and retract more filament
+G1      E6 F3000                     ; Re-prime nozzle (T584)
+G90                                  ; Restore absolute positioning mode
+
+; Cool bed
+M117 Moving to cool...
+G1 Y0 F3000                          ; Move bed to cooling position
+M400                                 ; Don't show status until moved
+M190 R<removal_bed_temperature>      ; Wait for bed to cool
+
+; Move to print removal position
+M117 Printing complete
+G1 X-19 Y280 F3000                   ; Move bed forward and toolhead left
+M84                                  ; Turn off stepper motors (implicit M400)
+M77                                  ; Stop print job timer
+M300 P200                            ; Beep
+
+; Optionally keep hotend and bed warm
+M104 S0                              ; Cool hotend without waiting
+M140 S0                              ; Cool bed without waiting
+M0 Done, keep warm?
+M104 S<retraction_temperature>       ; Set hotend to retraction without waiting
+M140 S<removal_bed_temperature>      ; Set bed to removal temp without waiting
+
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+;; End LulzBot TAZ 6 Single Extruder v2.1 end G-code ;;
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+
diff --git a/.Slic3r/printer/LulzBot TAZ 6, Dual Extruder v3 - start.gcode b/.Slic3r/printer/LulzBot TAZ 6, Dual Extruder v3 - start.gcode
new file mode 100644
index 0000000..4a82a3f
--- /dev/null
+++ b/.Slic3r/printer/LulzBot TAZ 6, Dual Extruder v3 - start.gcode
@@ -0,0 +1,128 @@
+
+; Input file name: [input_filename]
+; Printer preset: [printer_preset]
+; Filament preset: [filament_preset]
+; Print preset: [print_preset]
+
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+;; Begin LulzBot TAZ 6 Single Extruder v2.1 start G-code ;;
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+
+;
+; Initialization, homing, and retraction
+;
+
+; Set units, positioning modes, and extruder origin
+M73 P0                               ; Set LCD print progress to 0%
+M75                                  ; Start print job timer
+G26                                  ; Clear any "PROBE FAIL" (needed? see T372)
+G90                                  ; Set absolute positioning mode
+M204 S500                            ; Set acceleration
+M82                                  ; Set E absolute mode (override G91)
+G92 E0                               ; Set extruder position to 0 (origin)
+M420 S0                              ; Disable bed leveling with previous matrix
+
+; Begin heating hotend to retraction temperature
+M107                                 ; Turn off the print cooling fan
+M104 S<retraction_temperature>       ; Set hotend temperature without waiting
+M140 S[first_layer_bed_temperature]  ; Set bed temperature without waiting
+
+; While waiting for the hotend to heat, auto-home the axes
+M117 Homing all axes...
+G28                                  ; Auto-home all axes
+M109 R<retraction_temperature>       ; Wait for hotend temperature
+
+; Retract filament and move Y toward wiping pad (Z_SAFE_HOMING_Y_POINT - 30 mm)
+M117 Retracting...
+G1 Y228 E-30 F100                    ; Retract and move toward wiping pad
+
+;
+; Wiping
+;
+
+; Begin heating hotend to wiping temperature
+M104 S<wiping_temperature>           ; Set hotend temperature without waiting
+M400                                 ; Don't show status until retracted
+
+; While waiting for the hotend to heat, position the nozzle over the wiping pad
+M117 Moving to wipe...
+G1 X-15 Y100 F3000                   ; Move nozzle over wiping pad
+M109 R<wiping_temperature>           ; Wait for hotend temperature
+
+; Wipe the nozzle
+M117 Wiping nozzle...
+G1           Z1   F3000              ; Push nozzle into wiping pad
+G1 X-17 Y95       F1000
+G1 X-17 Y90       F1000
+G1 X-17 Y85       F1000
+G1 X-15 Y90       F1000
+G1 X-17 Y80       F1000
+G1 X-15 Y95       F1000
+G1 X-17 Y75       F2000
+G1 X-15 Y65       F2000
+G1 X-17 Y70       F2000
+G1 X-15 Y60       F2000
+G1 X-17 Y55       F2000
+G1 X-15 Y50       F2000
+G1 X-17 Y40       F2000
+G1 X-15 Y45       F2000
+G1 X-17 Y35       F2000
+G1 X-15 Y40       F2000
+G1 X-17 Y70       F2000
+G1 X-15 Y30  Z2   F2000
+G1 X-17 Y35       F2000
+G1 X-15 Y25       F2000
+G1 X-17 Y30       F2000
+G1 X-15 Y25  Z1.5 F1000
+G1 X-17 Y23       F1000
+G1          Z10   F1000              ; Lift out of wiping pad
+M400                                 ; Don't heat or show status until wiped
+
+;
+; Probing
+;
+
+; Begin heating hotend to probing temperature
+M104 S<probing_temperature>          ; Set hotend temperature without waiting
+
+; While waiting for the hotend to heat, move over first probe washer
+M117 Moving to probe...
+G1 X-9 Y-9                           ; Move over rear left bed-leveling washer
+M400                                 ; Don't show status until moved
+M109 R<probing_temperature>          ; Wait for hotend temperature
+
+; Probe the bed and enable bed-leveling compensation
+M117 Probing bed...
+M204 S100                            ; Set acceleration for probing moves
+G29                                  ; Probe the bed
+M204 S500                            ; Set acceleration back to normal
+M420 S1                              ; Enable bed leveling with new matrix
+G1 Z10 F5000                         ; Lift off the bed-leveling washer
+
+;
+; Printing
+;
+
+; Begin heating hotend to first layer temperature
+M104 S[first_layer_temperature]      ; Set hotend temperature without waiting
+M400                                 ; Don't show status until done probing
+
+; While waiting for the hotend to heat, position the nozzle and pause
+M117 Moving off probe...
+G1 X0 Y0 Z15 F5000                   ; Move above and away from last washer
+M400                                 ; Don't show status until centered
+
+; Ensure the hotend and bed are at the first layer temperatures
+M109 R[first_layer_temperature]      ; Wait for hotend temperature
+M190 S[first_layer_bed_temperature]  ; Wait for bed temperature
+
+; Extrude filament back into the nozzle
+M117 Priming nozzle...
+G1 Z2 E0 F75                         ; Slowly extrude filament back into nozzle
+M400                                 ; Don't show status until primed
+M117 Printing...
+
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+;; End LulzBot TAZ 6 Single Extruder v2.1 start G-code ;;
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+
diff --git a/.Slic3r/printer/LulzBot TAZ 6, Dual Extruder v3, eSUN HIPS.ini b/.Slic3r/printer/LulzBot TAZ 6, Dual Extruder v3, eSUN HIPS.ini
new file mode 100644
index 0000000..ae00815
--- /dev/null
+++ b/.Slic3r/printer/LulzBot TAZ 6, Dual Extruder v3, eSUN HIPS.ini
@@ -0,0 +1,27 @@
+# generated by Slic3r 1.2.9 on Wed Feb 20 19:03:11 2019
+bed_shape = 0x0,280x0,280x280,0x280
+before_layer_gcode = 
+end_gcode = \n;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;\n;; Begin LulzBot TAZ 6 Single Extruder v2.1 end G-code ;;\n;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;\n\n; Ensure moves are complete\nM400                                 ; Pause processing until moves complete\n\n; Begin cooling\nM104 S150       ; Cool hotend to retraction without waiting\nM140 S50      ; Cool bed to removal temp without waiting\nM107                                 ; Turn off the print cooling fan\n\n; Retract and re-prime filament\nG91                                  ; Make below Z and E movements relative\nG1     E-1  F300                     ; Retract some filament from the nozzle\nG1 Z20 E-5 F3000                     ; Lift nozzle and retract more filament\nG1      E6 F3000                     ; Re-prime nozzle (T584)\nG90                                  ; Restore absolute positioning mode\n\n; Cool bed\nM117 Moving to cool...\nG1 Y0 F3000                          ; Move bed to cooling position\nM400                                 ; Don't show status until moved\nM190 R50      ; Wait for bed to cool\n\n; Move to print removal position\nM117 Printing complete\nG1 X-19 Y280 F3000                   ; Move bed forward and toolhead left\nM84                                  ; Turn off stepper motors (implicit M400)\nM77                                  ; Stop print job timer\nM300 P200                            ; Beep\n\n; Optionally keep hotend and bed warm\nM104 S0                              ; Cool hotend without waiting\nM140 S0                              ; Cool bed without waiting\nM0 Done, keep warm?\nM104 S150       ; Set hotend to retraction without waiting\nM140 S50      ; Set bed to removal temp without waiting\n\n;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;\n;; End LulzBot TAZ 6 Single Extruder v2.1 end G-code ;;\n;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;\n
+extruder_offset = 0x0
+gcode_flavor = reprap
+layer_gcode = 
+nozzle_diameter = 0.5
+octoprint_apikey = 
+octoprint_host = 
+pressure_advance = 0
+retract_before_travel = 2
+retract_layer_change = 1
+retract_length = 1
+retract_length_toolchange = 10
+retract_lift = 0.2
+retract_restart_extra = 0
+retract_restart_extra_toolchange = 0
+retract_speed = 40
+start_gcode = \n; Input file name: [input_filename]\n; Printer preset: [printer_preset]\n; Filament preset: [filament_preset]\n; Print preset: [print_preset]\n\n;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;\n;; Begin LulzBot TAZ 6 Single Extruder v2.1 start G-code ;;\n;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;\n\n;\n; Initialization, homing, and retraction\n;\n\n; Set units, positioning modes, and extruder origin\nM73 P0                               ; Set LCD print progress to 0%\nM75                                  ; Start print job timer\nG26                                  ; Clear any "PROBE FAIL" (needed? see T372)\nG90                                  ; Set absolute positioning mode\nM204 S500                            ; Set acceleration\nM82                                  ; Set E absolute mode (override G91)\nG92 E0                               ; Set extruder position to 0 (origin)\nM420 S0                              ; Disable bed leveling with previous matrix\n\n; Begin heating hotend to retraction temperature\nM107                                 ; Turn off the print cooling fan\nM104 S150       ; Set hotend temperature without waiting\nM140 S[first_layer_bed_temperature]  ; Set bed temperature without waiting\n\n; While waiting for the hotend to heat, auto-home the axes\nM117 Homing all axes...\nG28                                  ; Auto-home all axes\nM109 R150       ; Wait for hotend temperature\n\n; Retract filament and move Y toward wiping pad (Z_SAFE_HOMING_Y_POINT - 30 mm)\nM117 Retracting...\nG1 Y228 E-30 F100                    ; Retract and move toward wiping pad\n\n;\n; Wiping\n;\n\n; Begin heating hotend to wiping temperature\nM104 S170           ; Set hotend temperature without waiting\nM400                                 ; Don't show status until retracted\n\n; While waiting for the hotend to heat, position the nozzle over the wiping pad\nM117 Moving to wipe...\nG1 X-15 Y100 F3000                   ; Move nozzle over wiping pad\nM109 R170           ; Wait for hotend temperature\n\n; Wipe the nozzle\nM117 Wiping nozzle...\nG1           Z1   F3000              ; Push nozzle into wiping pad\nG1 X-17 Y95       F1000\nG1 X-17 Y90       F1000\nG1 X-17 Y85       F1000\nG1 X-15 Y90       F1000\nG1 X-17 Y80       F1000\nG1 X-15 Y95       F1000\nG1 X-17 Y75       F2000\nG1 X-15 Y65       F2000\nG1 X-17 Y70       F2000\nG1 X-15 Y60       F2000\nG1 X-17 Y55       F2000\nG1 X-15 Y50       F2000\nG1 X-17 Y40       F2000\nG1 X-15 Y45       F2000\nG1 X-17 Y35       F2000\nG1 X-15 Y40       F2000\nG1 X-17 Y70       F2000\nG1 X-15 Y30  Z2   F2000\nG1 X-17 Y35       F2000\nG1 X-15 Y25       F2000\nG1 X-17 Y30       F2000\nG1 X-15 Y25  Z1.5 F1000\nG1 X-17 Y23       F1000\nG1          Z10   F1000              ; Lift out of wiping pad\nM400                                 ; Don't heat or show status until wiped\n\n;\n; Probing\n;\n\n; Begin heating hotend to probing temperature\nM104 S170          ; Set hotend temperature without waiting\n\n; While waiting for the hotend to heat, move over first probe washer\nM117 Moving to probe...\nG1 X-9 Y-9                           ; Move over rear left bed-leveling washer\nM400                                 ; Don't show status until moved\nM109 R170          ; Wait for hotend temperature\n\n; Probe the bed and enable bed-leveling compensation\nM117 Probing bed...\nM204 S100                            ; Set acceleration for probing moves\nG29                                  ; Probe the bed\nM204 S500                            ; Set acceleration back to normal\nM420 S1                              ; Enable bed leveling with new matrix\nG1 Z10 F5000                         ; Lift off the bed-leveling washer\n\n;\n; Printing\n;\n\n; Begin heating hotend to first layer temperature\nM104 S[first_layer_temperature]      ; Set hotend temperature without waiting\nM400                                 ; Don't show status until done probing\n\n; While waiting for the hotend to heat, position the nozzle and pause\nM117 Moving off probe...\nG1 X0 Y0 Z15 F5000                   ; Move above and away from last washer\nM400                                 ; Don't show status until centered\n\n; Ensure the hotend and bed are at the first layer temperatures\nM109 R[first_layer_temperature]      ; Wait for hotend temperature\nM190 S[first_layer_bed_temperature]  ; Wait for bed temperature\n\n; Extrude filament back into the nozzle\nM117 Priming nozzle...\nG1 Z2 E0 F75                         ; Slowly extrude filament back into nozzle\nM400                                 ; Don't show status until primed\nM117 Printing...\n\n;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;\n;; End LulzBot TAZ 6 Single Extruder v2.1 start G-code ;;\n;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;\n
+toolchange_gcode = 
+use_firmware_retraction = 0
+use_relative_e_distances = 0
+use_volumetric_e = 0
+vibration_limit = 0
+wipe = 0
+z_offset = 0
diff --git a/.Slic3r/slic3r.ini b/.Slic3r/slic3r.ini
index 6c46986..a552fda 100644
--- a/.Slic3r/slic3r.ini
+++ b/.Slic3r/slic3r.ini
@@ -10,9 +10,9 @@ version = 1.2.9
 version_check = 1
 
 [presets]
-filament = eSUN PLA, 3 mm.ini
+filament = eSUN HIPS, 3 mm.ini
 print = Base.ini
-printer = LulzBot TAZ 6, Single Extruder v2.1, eSUN PLA.ini
+printer = LulzBot TAZ 6, Dual Extruder v3, eSUN HIPS.ini
 
 [recent]
 config_directory =