TAZ 6, SE v2.1: Retract more before lifting at end

Hopefully this will reduce stringing at the end.

3 files changed, 4 insertions, 4 deletions

diff --git a/.Slic3r/printer/LulzBot TAZ 6, Single Extruder v2.1 - end.gcode b/.Slic3r/printer/LulzBot TAZ 6, Single Extruder v2.1 - end.gcode
index 73021de..76eff53 100644
--- a/.Slic3r/printer/LulzBot TAZ 6, Single Extruder v2.1 - end.gcode
+++ b/.Slic3r/printer/LulzBot TAZ 6, Single Extruder v2.1 - end.gcode
@@ -13,8 +13,8 @@ M107                                 ; Turn off the print cooling fan
 
 ; Retract and re-prime filament
 G91                                  ; Make below Z and E movements relative
-G1     E-1  F300                     ; Retract some filament from the nozzle
-G1 Z20 E-5 F3000                     ; Lift nozzle and retract more filament
+G1     E-3 F1000                     ; Retract some filament from the nozzle
+G1 Z20 E-3 F3000                     ; Lift nozzle and retract more filament
 G1      E6 F3000                     ; Re-prime nozzle (T584)
 G90                                  ; Restore absolute positioning mode
 
diff --git a/.Slic3r/printer/LulzBot TAZ 6, Single Extruder v2.1, eSUN HIPS.ini b/.Slic3r/printer/LulzBot TAZ 6, Single Extruder v2.1, eSUN HIPS.ini
index 7c44821..d7df82d 100644
--- a/.Slic3r/printer/LulzBot TAZ 6, Single Extruder v2.1, eSUN HIPS.ini
+++ b/.Slic3r/printer/LulzBot TAZ 6, Single Extruder v2.1, eSUN HIPS.ini
@@ -1,7 +1,7 @@
 # generated by Slic3r 1.2.9 on Thu Oct 17 20:31:02 2019
 bed_shape = 0x0,280x0,280x280,0x280
 before_layer_gcode = 
-end_gcode = \n;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;\n;; Begin LulzBot TAZ 6 Single Extruder v2.1 end G-code ;;\n;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;\n\n; Ensure moves are complete\nM400                                 ; Pause processing until moves complete\n\n; Begin cooling\nM104 S150       ; Cool hotend to retraction without waiting\nM140 S80      ; Cool bed to removal temp without waiting\nM107                                 ; Turn off the print cooling fan\n\n; Retract and re-prime filament\nG91                                  ; Make below Z and E movements relative\nG1     E-1  F300                     ; Retract some filament from the nozzle\nG1 Z20 E-5 F3000                     ; Lift nozzle and retract more filament\nG1      E6 F3000                     ; Re-prime nozzle (T584)\nG90                                  ; Restore absolute positioning mode\n\n; Cool bed\nM117 Moving to cool...\nG1 Y0 F3000                          ; Move bed to cooling position\nM400                                 ; Don't show status until moved\nM190 R80      ; Wait for bed to cool\n\n; Move to print removal position\nM117 Printing complete\nG1 X-19 Y280 F3000                   ; Move bed forward and toolhead left\nM84                                  ; Turn off stepper motors (implicit M400)\nM77                                  ; Stop print job timer\nM300 P200                            ; Beep\n\n; Optionally keep hotend and bed warm\nM104 S0                              ; Cool hotend without waiting\nM140 S0                              ; Cool bed without waiting\nM0 Done, keep warm?\nM104 S150       ; Set hotend to retraction without waiting\nM140 S80      ; Set bed to removal temp without waiting\n\n;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;\n;; End LulzBot TAZ 6 Single Extruder v2.1 end G-code ;;\n;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;\n
+end_gcode = \n;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;\n;; Begin LulzBot TAZ 6 Single Extruder v2.1 end G-code ;;\n;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;\n\n; Ensure moves are complete\nM400                                 ; Pause processing until moves complete\n\n; Begin cooling\nM104 S150       ; Cool hotend to retraction without waiting\nM140 S80      ; Cool bed to removal temp without waiting\nM107                                 ; Turn off the print cooling fan\n\n; Retract and re-prime filament\nG91                                  ; Make below Z and E movements relative\nG1     E-3 F1000                     ; Retract some filament from the nozzle\nG1 Z20 E-3 F3000                     ; Lift nozzle and retract more filament\nG1      E6 F3000                     ; Re-prime nozzle (T584)\nG90                                  ; Restore absolute positioning mode\n\n; Cool bed\nM117 Moving to cool...\nG1 Y0 F3000                          ; Move bed to cooling position\nM400                                 ; Don't show status until moved\nM190 R80      ; Wait for bed to cool\n\n; Move to print removal position\nM117 Printing complete\nG1 X-19 Y280 F3000                   ; Move bed forward and toolhead left\nM84                                  ; Turn off stepper motors (implicit M400)\nM77                                  ; Stop print job timer\nM300 P200                            ; Beep\n\n; Optionally keep hotend and bed warm\nM104 S0                              ; Cool hotend without waiting\nM140 S0                              ; Cool bed without waiting\nM0 Done, keep warm?\nM104 S150       ; Set hotend to retraction without waiting\nM140 S80      ; Set bed to removal temp without waiting\n\n;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;\n;; End LulzBot TAZ 6 Single Extruder v2.1 end G-code ;;\n;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;\n
 extruder_offset = 0x0
 gcode_flavor = reprap
 layer_gcode = 
diff --git a/.Slic3r/printer/LulzBot TAZ 6, Single Extruder v2.1, eSUN PLA.ini b/.Slic3r/printer/LulzBot TAZ 6, Single Extruder v2.1, eSUN PLA.ini
index 6199d4d..761e157 100644
--- a/.Slic3r/printer/LulzBot TAZ 6, Single Extruder v2.1, eSUN PLA.ini
+++ b/.Slic3r/printer/LulzBot TAZ 6, Single Extruder v2.1, eSUN PLA.ini
@@ -1,7 +1,7 @@
 # generated by Slic3r 1.2.9 on Thu Feb 14 18:28:41 2019
 bed_shape = 0x0,280x0,280x280,0x280
 before_layer_gcode = 
-end_gcode = \n;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;\n;; Begin LulzBot TAZ 6 Single Extruder v2.1 end G-code ;;\n;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;\n\n; Ensure moves are complete\nM400                                 ; Pause processing until moves complete\n\n; Begin cooling\nM104 S140       ; Cool hotend to retraction without waiting\nM140 S45      ; Cool bed to removal temp without waiting\nM107                                 ; Turn off the print cooling fan\n\n; Retract and re-prime filament\nG91                                  ; Make below Z and E movements relative\nG1     E-1  F300                     ; Retract some filament from the nozzle\nG1 Z20 E-5 F3000                     ; Lift nozzle and retract more filament\nG1      E6 F3000                     ; Re-prime nozzle (T584)\nG90                                  ; Restore absolute positioning mode\n\n; Cool bed\nM117 Moving to cool...\nG1 Y0 F3000                          ; Move bed to cooling position\nM400                                 ; Don't show status until moved\nM190 R45      ; Wait for bed to cool\n\n; Move to print removal position\nM117 Printing complete\nG1 X-19 Y280 F3000                   ; Move bed forward and toolhead left\nM84                                  ; Turn off stepper motors (implicit M400)\nM77                                  ; Stop print job timer\nM300 P200                            ; Beep\n\n; Optionally keep hotend and bed warm\nM104 S0                              ; Cool hotend without waiting\nM140 S0                              ; Cool bed without waiting\nM0 Done, keep warm?\nM104 S140       ; Set hotend to retraction without waiting\nM140 S45      ; Set bed to removal temp without waiting\n\n;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;\n;; End LulzBot TAZ 6 Single Extruder v2.1 end G-code ;;\n;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;\n
+end_gcode = \n;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;\n;; Begin LulzBot TAZ 6 Single Extruder v2.1 end G-code ;;\n;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;\n\n; Ensure moves are complete\nM400                                 ; Pause processing until moves complete\n\n; Begin cooling\nM104 S140       ; Cool hotend to retraction without waiting\nM140 S45      ; Cool bed to removal temp without waiting\nM107                                 ; Turn off the print cooling fan\n\n; Retract and re-prime filament\nG91                                  ; Make below Z and E movements relative\nG1     E-3 F1000                     ; Retract some filament from the nozzle\nG1 Z20 E-3 F3000                     ; Lift nozzle and retract more filament\nG1      E6 F3000                     ; Re-prime nozzle (T584)\nG90                                  ; Restore absolute positioning mode\n\n; Cool bed\nM117 Moving to cool...\nG1 Y0 F3000                          ; Move bed to cooling position\nM400                                 ; Don't show status until moved\nM190 R45      ; Wait for bed to cool\n\n; Move to print removal position\nM117 Printing complete\nG1 X-19 Y280 F3000                   ; Move bed forward and toolhead left\nM84                                  ; Turn off stepper motors (implicit M400)\nM77                                  ; Stop print job timer\nM300 P200                            ; Beep\n\n; Optionally keep hotend and bed warm\nM104 S0                              ; Cool hotend without waiting\nM140 S0                              ; Cool bed without waiting\nM0 Done, keep warm?\nM104 S140       ; Set hotend to retraction without waiting\nM140 S45      ; Set bed to removal temp without waiting\n\n;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;\n;; End LulzBot TAZ 6 Single Extruder v2.1 end G-code ;;\n;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;\n
 extruder_offset = 0x0
 gcode_flavor = reprap
 layer_gcode =