From 2d62c46e86735f22d9336620fca169c5257b837b Mon Sep 17 00:00:00 2001 From: Patrick McDermott Date: Mon, 21 Oct 2019 01:02:30 -0400 Subject: TAZ 6, SE v2.1: Retract more before lifting at end Hopefully this will reduce stringing at the end. --- diff --git a/.Slic3r/printer/LulzBot TAZ 6, Single Extruder v2.1 - end.gcode b/.Slic3r/printer/LulzBot TAZ 6, Single Extruder v2.1 - end.gcode index 73021de..76eff53 100644 --- a/.Slic3r/printer/LulzBot TAZ 6, Single Extruder v2.1 - end.gcode +++ b/.Slic3r/printer/LulzBot TAZ 6, Single Extruder v2.1 - end.gcode @@ -13,8 +13,8 @@ M107 ; Turn off the print cooling fan ; Retract and re-prime filament G91 ; Make below Z and E movements relative -G1 E-1 F300 ; Retract some filament from the nozzle -G1 Z20 E-5 F3000 ; Lift nozzle and retract more filament +G1 E-3 F1000 ; Retract some filament from the nozzle +G1 Z20 E-3 F3000 ; Lift nozzle and retract more filament G1 E6 F3000 ; Re-prime nozzle (T584) G90 ; Restore absolute positioning mode diff --git a/.Slic3r/printer/LulzBot TAZ 6, Single Extruder v2.1, eSUN HIPS.ini b/.Slic3r/printer/LulzBot TAZ 6, Single Extruder v2.1, eSUN HIPS.ini index 7c44821..d7df82d 100644 --- a/.Slic3r/printer/LulzBot TAZ 6, Single Extruder v2.1, eSUN HIPS.ini +++ b/.Slic3r/printer/LulzBot TAZ 6, Single Extruder v2.1, eSUN HIPS.ini @@ -1,7 +1,7 @@ # generated by Slic3r 1.2.9 on Thu Oct 17 20:31:02 2019 bed_shape = 0x0,280x0,280x280,0x280 before_layer_gcode = -end_gcode = \n;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;\n;; Begin LulzBot TAZ 6 Single Extruder v2.1 end G-code ;;\n;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;\n\n; Ensure moves are complete\nM400 ; Pause processing until moves complete\n\n; Begin cooling\nM104 S150 ; Cool hotend to retraction without waiting\nM140 S80 ; Cool bed to removal temp without waiting\nM107 ; Turn off the print cooling fan\n\n; Retract and re-prime filament\nG91 ; Make below Z and E movements relative\nG1 E-1 F300 ; Retract some filament from the nozzle\nG1 Z20 E-5 F3000 ; Lift nozzle and retract more filament\nG1 E6 F3000 ; Re-prime nozzle (T584)\nG90 ; Restore absolute positioning mode\n\n; Cool bed\nM117 Moving to cool...\nG1 Y0 F3000 ; Move bed to cooling position\nM400 ; Don't show status until moved\nM190 R80 ; Wait for bed to cool\n\n; Move to print removal position\nM117 Printing complete\nG1 X-19 Y280 F3000 ; Move bed forward and toolhead left\nM84 ; Turn off stepper motors (implicit M400)\nM77 ; Stop print job timer\nM300 P200 ; Beep\n\n; Optionally keep hotend and bed warm\nM104 S0 ; Cool hotend without waiting\nM140 S0 ; Cool bed without waiting\nM0 Done, keep warm?\nM104 S150 ; Set hotend to retraction without waiting\nM140 S80 ; Set bed to removal temp without waiting\n\n;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;\n;; End LulzBot TAZ 6 Single Extruder v2.1 end G-code ;;\n;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;\n +end_gcode = \n;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;\n;; Begin LulzBot TAZ 6 Single Extruder v2.1 end G-code ;;\n;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;\n\n; Ensure moves are complete\nM400 ; Pause processing until moves complete\n\n; Begin cooling\nM104 S150 ; Cool hotend to retraction without waiting\nM140 S80 ; Cool bed to removal temp without waiting\nM107 ; Turn off the print cooling fan\n\n; Retract and re-prime filament\nG91 ; Make below Z and E movements relative\nG1 E-3 F1000 ; Retract some filament from the nozzle\nG1 Z20 E-3 F3000 ; Lift nozzle and retract more filament\nG1 E6 F3000 ; Re-prime nozzle (T584)\nG90 ; Restore absolute positioning mode\n\n; Cool bed\nM117 Moving to cool...\nG1 Y0 F3000 ; Move bed to cooling position\nM400 ; Don't show status until moved\nM190 R80 ; Wait for bed to cool\n\n; Move to print removal position\nM117 Printing complete\nG1 X-19 Y280 F3000 ; Move bed forward and toolhead left\nM84 ; Turn off stepper motors (implicit M400)\nM77 ; Stop print job timer\nM300 P200 ; Beep\n\n; Optionally keep hotend and bed warm\nM104 S0 ; Cool hotend without waiting\nM140 S0 ; Cool bed without waiting\nM0 Done, keep warm?\nM104 S150 ; Set hotend to retraction without waiting\nM140 S80 ; Set bed to removal temp without waiting\n\n;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;\n;; End LulzBot TAZ 6 Single Extruder v2.1 end G-code ;;\n;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;\n extruder_offset = 0x0 gcode_flavor = reprap layer_gcode = diff --git a/.Slic3r/printer/LulzBot TAZ 6, Single Extruder v2.1, eSUN PLA.ini b/.Slic3r/printer/LulzBot TAZ 6, Single Extruder v2.1, eSUN PLA.ini index 6199d4d..761e157 100644 --- a/.Slic3r/printer/LulzBot TAZ 6, Single Extruder v2.1, eSUN PLA.ini +++ b/.Slic3r/printer/LulzBot TAZ 6, Single Extruder v2.1, eSUN PLA.ini @@ -1,7 +1,7 @@ # generated by Slic3r 1.2.9 on Thu Feb 14 18:28:41 2019 bed_shape = 0x0,280x0,280x280,0x280 before_layer_gcode = -end_gcode = \n;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;\n;; Begin LulzBot TAZ 6 Single Extruder v2.1 end G-code ;;\n;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;\n\n; Ensure moves are complete\nM400 ; Pause processing until moves complete\n\n; Begin cooling\nM104 S140 ; Cool hotend to retraction without waiting\nM140 S45 ; Cool bed to removal temp without waiting\nM107 ; Turn off the print cooling fan\n\n; Retract and re-prime filament\nG91 ; Make below Z and E movements relative\nG1 E-1 F300 ; Retract some filament from the nozzle\nG1 Z20 E-5 F3000 ; Lift nozzle and retract more filament\nG1 E6 F3000 ; Re-prime nozzle (T584)\nG90 ; Restore absolute positioning mode\n\n; Cool bed\nM117 Moving to cool...\nG1 Y0 F3000 ; Move bed to cooling position\nM400 ; Don't show status until moved\nM190 R45 ; Wait for bed to cool\n\n; Move to print removal position\nM117 Printing complete\nG1 X-19 Y280 F3000 ; Move bed forward and toolhead left\nM84 ; Turn off stepper motors (implicit M400)\nM77 ; Stop print job timer\nM300 P200 ; Beep\n\n; Optionally keep hotend and bed warm\nM104 S0 ; Cool hotend without waiting\nM140 S0 ; Cool bed without waiting\nM0 Done, keep warm?\nM104 S140 ; Set hotend to retraction without waiting\nM140 S45 ; Set bed to removal temp without waiting\n\n;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;\n;; End LulzBot TAZ 6 Single Extruder v2.1 end G-code ;;\n;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;\n +end_gcode = \n;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;\n;; Begin LulzBot TAZ 6 Single Extruder v2.1 end G-code ;;\n;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;\n\n; Ensure moves are complete\nM400 ; Pause processing until moves complete\n\n; Begin cooling\nM104 S140 ; Cool hotend to retraction without waiting\nM140 S45 ; Cool bed to removal temp without waiting\nM107 ; Turn off the print cooling fan\n\n; Retract and re-prime filament\nG91 ; Make below Z and E movements relative\nG1 E-3 F1000 ; Retract some filament from the nozzle\nG1 Z20 E-3 F3000 ; Lift nozzle and retract more filament\nG1 E6 F3000 ; Re-prime nozzle (T584)\nG90 ; Restore absolute positioning mode\n\n; Cool bed\nM117 Moving to cool...\nG1 Y0 F3000 ; Move bed to cooling position\nM400 ; Don't show status until moved\nM190 R45 ; Wait for bed to cool\n\n; Move to print removal position\nM117 Printing complete\nG1 X-19 Y280 F3000 ; Move bed forward and toolhead left\nM84 ; Turn off stepper motors (implicit M400)\nM77 ; Stop print job timer\nM300 P200 ; Beep\n\n; Optionally keep hotend and bed warm\nM104 S0 ; Cool hotend without waiting\nM140 S0 ; Cool bed without waiting\nM0 Done, keep warm?\nM104 S140 ; Set hotend to retraction without waiting\nM140 S45 ; Set bed to removal temp without waiting\n\n;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;\n;; End LulzBot TAZ 6 Single Extruder v2.1 end G-code ;;\n;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;\n extruder_offset = 0x0 gcode_flavor = reprap layer_gcode = -- cgit v0.9.1