1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
|
<!DOCTYPE html>
<html>
<head>
<meta charset="utf-8">
<meta name="viewport" content="width=device-width, initial-scale=1">
<style type="text/css">
@import url('../css/main.css');
</style>
<title>Libreboot documentation: Security on the ThinkPad T60</title>
</head>
<body>
<header>
<h1>Security on the ThinkPad T60</h1>
<aside>Hardware modifications to enhance security on the ThinkPad T60. This tutorial is <b>incomplete</b> at the time of writing.</aside>
</header>
<p>Or go <a href="index.html">back to main index</a></p>
<h2>Table of Contents</h2>
<ul>
<li><a href="#hardware_requirements">Hardware Requirements</a></li>
<li><a href="#software_requirements">Software Requirements</a></li>
<li><a href="#procedure">The procedure</a></li>
</ul>
<h1 id="hardware_requirements">Hardware requirements</h1>
<ul>
<li>A T60</li>
<li>screwdriver</li>
<li>(in a later version of this tutorial: soldering iron and scalpel)</li>
</ul>
<h1 id="software_requirements">Software requirements</h1>
<ul>
<li>none (at least in the scope of the article as-is)</li>
<li>You probably want to encrypt your GNU/Linux install using LUKS</li>
</ul>
<h1>
Rationale
</h1>
<p>
Most people think of security on the software side: the hardware is important aswell.
work.
</p>
<p>
This tutorial deals with reducing the number of devices that have direct memory access that
could communicate with inputs/outputs that could be used to remotely
command the machine (or leak data). All of this is purely theoretical for the time being.
</p>
<h1 id="procedure">Disassembly</h1>
<p>
Remove those screws and remove the HDD:<br/>
<img src="../images/t60_dev/0001.JPG" alt="" /> <img src="../images/t60_dev/0002.JPG" alt="" />
</p>
<p>
Lift off the palm rest:<br/>
<img src="../images/t60_dev/0003.JPG" alt="" />
</p>
<p>
Lift up the keyboard, pull it back a bit, flip it over like that and then disconnect it from the board:<br/>
<img src="../images/t60_dev/0004.JPG" alt="" /> <img src="../images/t60_dev/0005.JPG" alt="" /> <img src="../images/t60_dev/0006.JPG" alt="" />
</p>
<p>
Gently wedge both sides loose:<br/>
<img src="../images/t60_dev/0007.JPG" alt="" /> <img src="../images/t60_dev/0008.JPG" alt="" />
</p>
<p>
Remove that cable from the position:<br/>
<img src="../images/t60_dev/0009.JPG" alt="" /> <img src="../images/t60_dev/0010.JPG" alt="" />
</p>
<p>
Now remove that bezel. Remove wifi, nvram battery and speaker connector (also remove 56k modem, on the left of wifi):<br/>
<img src="../images/t60_dev/0011.JPG" alt="" /><br/>
Reason: has direct (and very fast) memory access, and could (theoretically) leak data over a side-channel.<br/>
<b>Wifi:</b> The ath5k/ath9k cards might not have firmware at all. They might safe but could have
access to the computer's RAM trough DMA. If people have an intel
card(most T60's come with Intel wifi by default, until you change it),then that card runs
a non-free firwamre and has access to the computer's RAM trough DMA! So
it's risk-level is very high.
</p>
<p>
Remove those screws:<br/>
<img src="../images/t60_dev/0012.JPG" alt="" />
</p>
<p>
Disconnect the power jack:<br/>
<img src="../images/t60_dev/0013.JPG" alt="" />
</p>
<p>
Remove nvram battery (we will put it back later):<br/>
<img src="../images/t60_dev/0014.JPG" alt="" />
</p>
<p>
Disconnect cable (for 56k modem) and disconnect the other cable:<br/>
<img src="../images/t60_dev/0015.JPG" alt="" /> <img src="../images/t60_dev/0016.JPG" alt="" />
</p>
<p>
Disconnect speaker cable:<br/>
<img src="../images/t60_dev/0017.JPG" alt="" />
</p>
<p>
Disconnect the other end of the 56k modem cable:<br/>
<img src="../images/t60_dev/0018.JPG" alt="" />
</p>
<p>
Make sure you removed it:<br/>
<img src="../images/t60_dev/0019.JPG" alt="" />
</p>
<p>
Unscrew those:<br/>
<img src="../images/t60_dev/0020.JPG" alt="" />
</p>
<p>
Make sure you removed those:<br/>
<img src="../images/t60_dev/0021.JPG" alt="" />
</p>
<p>
Disconnect LCD cable from board:<br/>
<img src="../images/t60_dev/0022.JPG" alt="" />
</p>
<p>
Remove those screws then remove the LCD assembly:<br/>
<img src="../images/t60_dev/0023.JPG" alt="" /> <img src="../images/t60_dev/0024.JPG" alt="" /> <img src="../images/t60_dev/0025.JPG" alt="" />
</p>
<p>
Once again, make sure you removed those:<br/>
<img src="../images/t60_dev/0026.JPG" alt="" />
</p>
<p>
Remove the shielding containing the motherboard, then flip it over. Remove these screws, placing them on a steady
surface in the same layout as they were in before you removed them. Also, you should mark each screw hole after removing the
screw (a permanent marker pen will do), this is so that you have a point of reference when re-assembling the machine:<br/>
<img src="../images/t60_dev/0027.JPG" alt="" /> <img src="../images/t60_dev/0028.JPG" alt="" /> <img src="../images/t60_dev/0029.JPG" alt="" />
<img src="../images/t60_dev/0031.JPG" alt="" /> <img src="../images/t60_dev/0032.JPG" alt="" /> <img src="../images/t60_dev/0033.JPG" alt="" />
</p>
<p>
Remove microphone (soldering iron not needed. Just wedge it out gently):<br/>
<img src="../images/t60_dev/0039.JPG" alt="" /><br/>
<b>Rationale:</b><br/>
Another reason to remove the microphone: If your computer gets<a href="#ref1">[1]</a> compromised, it can
record what you say, and use it to receive data from nearby devices if
they're compromised too. Also, we do not know what the built-in microcode (in the CPU) is doing; it could theoretically
be programmed to accept remote commands from some speaker somewhere (remote security hole). <b>In other words,
the machine could already be compromised from the factory.</b>
</p>
<p>
Remove infrared:<br/>
<img src="../images/t60_dev/0040.JPG" alt="" /> <img src="../images/t60_dev/0042.JPG" alt="" />
</p>
<p>
Remove cardbus (it's in a socket, no need to disable. Just remove the port itself):<br/>
<img src="../images/t60_dev/0041.JPG" alt="" /><br/>
<b>Rationale:</b><br/>
It has direct memory access and can be used to extract sensitive details (such as LUKS keys). See
'GoodBIOS' video linked at the end (speaker is Peter Stuge, a coreboot hacker). The video covers X60
but the same topics apply to T60.
</p>
<p>
Before re-installing the upper chassis, remove the speaker:<br/>
<img src="../images/t60_dev/0043.JPG" alt="" /> <img src="../images/t60_dev/0044.JPG" alt="" /><br/>
Reason: combined with the microphone issue, this could be used to leak data.<br/>
If your computer gets<a href="#ref1">[1]</a> compromised, it can be used to
transmit data to nearby compromised devices. It's unknown if it can be
turned into a microphone<a href="#ref2">[2]</a>.<br/>
Replacement: headphones/speakers (line-out) or external DAC (USB).
</p>
<p>
Remove the wwan:<br/>
<img src="../images/t60_dev/0045.JPG" alt="" /><br/>
<b>Wwan (3d modem):</b> They run proprietary software and have access to the
computer's RAM! So it's like AMT but over the GSM network which is
probably even worse.<br/>
Replacement: external USB wifi dongle. (or USB wwan/3g dongle; note, this has all the same privacy issues as mobile phones. wwan not recommended).
</p>
<p>
This is where the simcard connector is soldered. See notes above about wwan. Remove simcard by removing battery
and then it's accessible (so, remember to do this when you re-assemble. or you could do it now?)<br/>
<img src="../images/t60_dev/0046.JPG" alt="" />
</p>
<p>
Put those screws back:<br/>
<img src="../images/t60_dev/0047.JPG" alt="" />
</p>
<p>
Put it back into lower chassis:<br/>
<img src="../images/t60_dev/0048.JPG" alt="" />
</p>
<p>
Attach LCD and insert screws (also, attach the lcd cable to the board):<br/>
<img src="../images/t60_dev/0049.JPG" alt="" />
</p>
<p>
Insert those screws:<br/>
<img src="../images/t60_dev/0050.JPG" alt="" />
</p>
<p>
On the CPU (and there is another chip south-east to it, sorry forgot to take pic)
clean off the old thermal paste (rubbing a1ocheal (misspelling intentional. halal internet)) and apply new (Artic Silver 5 is good, others are good too)
you should also clean the heatsink the same way<br/>
<img src="../images/t60_dev/0051.JPG" alt="" />
</p>
<p>
Attach the heatsink and install the screws (also, make sure to install the AC jack as highlighted):<br/>
<img src="../images/t60_dev/0052.JPG" alt="" />
</p>
<p>
Reinstall that upper bezel:<br/>
<img src="../images/t60_dev/0053.JPG" alt="" />
</p>
<p>
Do that:<br/>
<img src="../images/t60_dev/0054.JPG" alt="" /> <img src="../images/t60_dev/0055.JPG" alt="" />
</p>
<p>
Attach keyboard and install nvram battery:<br/>
<img src="../images/t60_dev/0056.JPG" alt="" /> <img src="../images/t60_dev/0057.JPG" alt="" />
</p>
<p>
Place keyboard and (sorry, forgot to take pics) reinstall the palmrest and insert screws on the underside:<br/>
<img src="../images/t60_dev/0058.JPG" alt="" />
</p>
<p>
Remove those covers and unscrew:<br/>
<img src="../images/t60_dev/0059.JPG" alt="" /> <img src="../images/t60_dev/0060.JPG" alt="" /> <img src="../images/t60_dev/0061.JPG" alt="" />
</p>
<p>
Gently pry off the front bezel (sorry, forgot to take pics).
</p>
<p>
Remove bluetooth module:<br/>
<img src="../images/t60_dev/0062.JPG" alt="" /> <img src="../images/t60_dev/0063.JPG" alt="" />
</p>
<p>
Re-attach the front bezel and re-insert the screws (sorry, forgot to take pics).
</p>
<p>
It lives!<br/>
<img src="../images/t60_dev/0071.JPG" alt="" /> <img src="../images/t60_dev/0072.JPG" alt="" /> <img src="../images/t60_dev/0073.JPG" alt="" />
</p>
<p>
Always stress test ('stress -c 2' and xsensors. below 90C is ok) when replacing cpu paste/heatsink:<br/>
<img src="../images/t60_dev/0074.JPG" alt="" />
</p>
<h2>
Not covered yet:
</h2>
<ul>
<li>Disable flashing the ethernet firmware</li>
<li>Disable SPI flash writes (can be re-enabled by unsoldering two parts)</li>
<li>Disable use of xrandr/edid on external monitor (cut 2 pins on VGA)</li>
<li>Disable docking station (might be possible to do it in software, in coreboot upstream as a Kconfig option)</li>
</ul>
<p>
Go to <a href="http://media.ccc.de/browse/congress/2013/30C3_-_5529_-_en_-_saal_2_-_201312271830_-_hardening_hardware_and_choosing_a_goodbios_-_peter_stuge.html">http://media.ccc.de/browse/congress/2013/30C3_-_5529_-_en_-_saal_2_-_201312271830_-_hardening_hardware_and_choosing_a_goodbios_-_peter_stuge.html</a>
or directly to the video: <a href="http://mirror.netcologne.de/CCC/congress/2013/webm/30c3-5529-en-Hardening_hardware_and_choosing_a_goodBIOS_webm.webm">http://mirror.netcologne.de/CCC/congress/2013/webm/30c3-5529-en-Hardening_hardware_and_choosing_a_goodBIOS_webm.webm</a>.
</p>
<p>
A lot of this tutorial is based on that video. Look towards the second half of the video to see how to do the above.
</p>
<h2>
Also not covered yet:
</h2>
<ul>
<li>
Intrusion detection: randomized seal on screws<br/>
Just put nail polish with lot of glider on the important screws, take
some good pictures. Keep the pictueres and make sure of their integrity.
Compare the nail polish with the pictures before powering on the laptop.
</li>
<li>
Tips about preventing/mitigating risk of cold boot attack.
<ul>
<li>soldered RAM?</li>
<li>wipe all RAM at boot/power-off/power-on? (patch in coreboot upstream?)</li>
<li>ask gnutoo about fallback patches (counts number of boots)</li>
</ul>
</li>
<li>
General tips/advice and web links showing how to detect physical intrusions.
</li>
<li>
For example: <a href="http://cs.tau.ac.il/~tromer/acoustic/">http://cs.tau.ac.il/~tromer/acoustic/</a>
or <a href="http://cyber.bgu.ac.il/content/how-leak-sensitive-data-isolated-computer-air-gap-near-mobile-phone-airhopper">http://cyber.bgu.ac.il/content/how-leak-sensitive-data-isolated-computer-air-gap-near-mobile-phone-airhopper</a>.
</li>
<li>
https://gitorious.org/gnutoo-for-coreboot/grub-assemble/source/a61f636797777a742f65f4c9c58032aa6a9b23c3:
</li>
</ul>
<h1>
Extra notes
</h1>
<p>
EC: Cannot be removed but can be mitigated: it contains non-free
non-loadable code, but it has no access to the computer's RAM.
It has access to the on-switch of the wifi, bluetooth, modem and some
other power management features. The issue is that it has access to the
keyboard, however if the software security howto <b>(not yet written)</b> is followed correctly,
it won't be able to leak data to a local attacker. It has no network
access but it may still be able to leak data remotely, but that
requires someone to be nearby to recover the data with the help of an
SDR and some directional antennas<a href="#ref3">[3]</a>.
</p>
<p>
<a href="http://www.coreboot.org/Intel_82573_Ethernet_controller">Intel 82573 Ethernet controller</a>
on the X60 seems safe, according to Denis.
</p>
<h2>
Risk level
</h2>
<ul>
<li>Modem (3g/wwan): highest</li>
<li>Intel wifi: Near highest</li>
<li>Atheros PCI wifi: unknown, but lower than intel wifi.</li>
<li>Microphone: only problematic if the computer gets compromised.</li>
<li>Speakers: only problematic if the computer gets compromised.</li>
<li>EC: can be mitigated if following the guide on software security.</li>
</ul>
<h1>
Further reading material (software security)
</h1>
<ul>
<li><a href="../gnulinux/encrypted_trisquel.html">Installing Trisquel GNU/Linux with full disk encryption (including /boot)</a></li>
<li><a href="../gnulinux/encrypted_parabola.html">Installing Parabola GNU/Linux with full disk encryption (including /boot)</a></li>
<li><a href="dock.html">Notes about DMA access and the docking station</a></li>
</ul>
<h1>
References
</h1>
<h2 id="ref1">[1] physical access</h2>
<p>
Explain that black hats, TAO, and so on might use a 0day to get in,
and explain that in this case it mitigates what the attacker can do.
Also the TAO do some evaluation before launching an attack: they take
the probability of beeing caught into account, along with the kind of
target. A 0day costs a lot of money, I heard that it was from 100000$
to 400000$, some other websites had prices 10 times lower but that
but it was probably a typo. So if people increase their security it
makes it more risky and more costly to attack people.
</p>
<h2 id="ref2">[2] microphone</h2>
<p>
It's possible to turn headphones into a microphone, you could try
yourself, however they don't record loud at all. Also intel cards have
the capability to change a connector's function, for instance the
microphone jack can now become a headphone plug, that's called
retasking. There is some support for it in GNU/Linux but it's not very
well known.
</p>
<h2 id="ref3">[3] Video (CCC)</h2>
<p>
30c3-5356-en-Firmware_Fat_Camp_webm.webm from the 30th CCC. While
their demo is experimental(their hardware also got damaged during the
transport), the spies probably already have that since a long time.
<a href="http://berlin.ftp.media.ccc.de/congress/2013/webm/30c3-5356-en-Firmware_Fat_Camp_webm.webm">http://berlin.ftp.media.ccc.de/congress/2013/webm/30c3-5356-en-Firmware_Fat_Camp_webm.webm</a>
</p>
<hr/>
<p>
Copyright © 2014 Francis Rowe <info@gluglug.org.uk><br/>
This document is released under the Creative Commons Attribution-ShareAlike 4.0 International Public License and all future versions.
A copy of the license can be found at <a href="../license.txt">../license.txt</a>.
</p>
<p>
This document is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See <a href="../license.txt">../license.txt</a> for more information.
</p>
</body>
</html>
|
