1 files changed, 52 insertions, 0 deletions
diff --git a/resources/memtest86plus/patch/config.h b/resources/memtest86plus/patch/config.h
new file mode 100644
index 0000000..10ac525
--- /dev/null
+++ b/resources/memtest86plus/patch/config.h
@@ -0,0 +1,52 @@
+/*
+ * MemTest86+ V5 Specific code (GPL V2.0)
+ * By Samuel DEMEULEMEESTER, sdemeule@memtest.org
+ * http://www.canardpc.com - http://www.memtest.org
+ * ------------------------------------------------
+ * config.h - MemTest-86  Version 3.3
+ *
+ * Compile time configuration options
+ *
+ * Released under version 2 of the Gnu Public License.
+ * By Chris Brady
+ */
+
+/* CONSERVATIVE_SMP - If set to 0, SMP will be enabled by default */
+/* Might be enabled in future revision after extensive testing */
+/* In all cases, SMP is disabled by defaut on server platform */
+#define CONSERVATIVE_SMP 1
+
+/* BEEP_MODE - Beep on error. Default off, Change to 1 to enable */
+#define BEEP_MODE 1
+
+/* BEEP_END_NO_ERROR - Beep at end of each pass without error. Default off, Change to 1 to enable */
+#define BEEP_END_NO_ERROR 0
+
+/* PARITY_MEM - Enables support for reporting memory parity errors */
+/*	Experimental, normally enabled */
+#define PARITY_MEM
+
+/* SERIAL_CONSOLE_DEFAULT -  The default state of the serial console. */
+/*	This is normally off since it slows down testing.  Change to a 1 */
+/*	to enable. */
+#define SERIAL_CONSOLE_DEFAULT 0
+
+/* SERIAL_TTY - The default serial port to use. 0=ttyS0, 1=ttyS1 */ 
+#define SERIAL_TTY 0
+
+/* SERIAL_BAUD_RATE - Baud rate for the serial console */
+#define SERIAL_BAUD_RATE 115200
+
+/* SCRN_DEBUG - extra check for SCREEN_BUFFER
+ */ 
+/* #define SCRN_DEBUG */
+
+/* APM - Turns off APM at boot time to avoid blanking the screen */
+/*	Normally enabled */
+#define APM_OFF
+
+/* USB_WAR - Enables a workaround for errors caused by BIOS USB keyboard */
+/*	and mouse support*/
+/*	Normally enabled */
+#define USB_WAR
+