summaryrefslogtreecommitdiffstats
path: root/docs/howtos/x60_unbrick.html
diff options
context:
space:
mode:
authorFrancis Rowe <info@gluglug.org.uk>2014-07-11 04:53:00 (EDT)
committer Michał Masłowski <mtjm@mtjm.eu>2014-08-22 13:01:19 (EDT)
commitcee90ae0fce6d6aee8d78969b60c952c8890abd6 (patch)
tree6cbca259e213f5ffbc3927121e662c0377938cce /docs/howtos/x60_unbrick.html
downloadlibreboot-cee90ae0fce6d6aee8d78969b60c952c8890abd6.zip
libreboot-cee90ae0fce6d6aee8d78969b60c952c8890abd6.tar.gz
libreboot-cee90ae0fce6d6aee8d78969b60c952c8890abd6.tar.bz2
Libreboot release 6 beta 1.r20140711
Diffstat (limited to 'docs/howtos/x60_unbrick.html')
-rw-r--r--docs/howtos/x60_unbrick.html302
1 files changed, 302 insertions, 0 deletions
diff --git a/docs/howtos/x60_unbrick.html b/docs/howtos/x60_unbrick.html
new file mode 100644
index 0000000..10f66b4
--- /dev/null
+++ b/docs/howtos/x60_unbrick.html
@@ -0,0 +1,302 @@
+<!DOCTYPE html>
+<html>
+<head>
+ <meta charset="utf-8">
+ <meta name="viewport" content="width=device-width, initial-scale=1">
+
+ <style type="text/css">
+ body {
+ background:#fff;
+ color:#000;
+ font-family:sans-serif;
+ font-size:1em;
+ }
+ </style>
+
+ <title>Libreboot documentation: Unbricking the ThinkPad X60</title>
+</head>
+
+<body>
+
+ <header>
+ <h1>Unbricking the ThinkPad X60</h1>
+ <aside>This guide will show you how to recover from a bad flash that prevents your ThinkPad X60 from booting.</aside>
+ </header>
+
+ <p>Or go <a href="../index.html">back to main index</a></p>
+
+ <h2>Table of Contents</h2>
+ <ul>
+ <li><a href="#hardware_requirements">Hardware Requirements</a></li>
+ <li><a href="#software_requirements">Software Requirements</a></li>
+ <li>
+ Types of brick:
+ <ul>
+ <li><a href="#bucts_brick">Brick type 1: bucts not reset</a></li>
+ <li><a href="#recovery">Brick type 2: bad rom (or user error), machine won't boot</a></li>
+ </ul>
+ </li>
+ </ul>
+
+ <h1 id="hardware_requirements">Hardware requirements</h1>
+ <ul>
+ <li>a 2nd computer (maybe another X60. any computer will do)</li>
+ <li>external flashrom-compatible programmer (I'm using the "bus pirate")
+ <li>SOIC-8 IC clip (I'm using the Pomona 5250)</li>
+ <li>Cable (programmer<>clip) - mine came with the bus pirate.</li>
+ <li>USB mini a to b cable (for buspirate<>computer connection).</li>
+ </ul>
+
+ <h1 id="software_requirements">Software requirements</h1>
+ <ul>
+ <li>GNU/Linux (on the 2nd computer)</li>
+ <li>flashrom software (on the 2nd computer): <a href="http://flashrom.org/" target="_blank">http://flashrom.org/</a>
+ </ul>
+
+ <h1 id="bucts_brick">Brick type 1: bucts not reset.</h1>
+ <p>
+ You still have Lenovo BIOS, or you had libreboot running and you flashed another ROM; and you had bucts 1 set and
+ the ROM wasn't dd'd.* or if Lenovo BIOS was present and libreboot wasn't flashed.<br/><br/>
+
+ In this case, unbricking is easy: reset BUC.TS to 0 by removing that yellow cmos coin (it's a battery) and putting it back after a minute or two:<br/>
+ <img src="x60_unbrick/0004.jpg" alt="" /><br/><br/>
+
+ *Those dd commands should be applied to all newly compiled X60 ROM's (the ROM's in libreboot binary archives already have this applied!):<br/>
+ dd if=coreboot.rom of=top64k.bin bs=1 skip=$[$(stat -c %s coreboot.rom) - 0x10000] count=64k<br/>
+ dd if=coreboot.rom bs=1 skip=$[$(stat -c %s coreboot.rom) - 0x20000] count=64k | hexdump<br/>
+ dd if=top64k.bin of=coreboot.rom bs=1 seek=$[$(stat -c %s coreboot.rom) - 0x20000] count=64k conv=notrunc<br/>
+ (doing this makes the ROM suitable for use when flashing a machine that still has Lenovo BIOS running,
+ using those instructions: <a href="http://www.coreboot.org/Board:lenovo/x60/Installation" target="_blank">http://www.coreboot.org/Board:lenovo/x60/Installation</a>.
+ </p>
+
+ <h1 id="recovery">bad rom (or user error), machine won't boot</h1>
+ <p>
+ In this scenario, you compiled a ROM that had an incorrect configuration, or there is an actual bug preventing your machine from
+ booting. Or, maybe, you set BUC.TS to 0 and shut down after first flash while Lenovo BIOS was running. In any case, your machine is bricked and will not boot at all.
+ </p>
+ <p>
+ &quot;Unbricking&quot; means flashing a known-good (working) ROM. The problem: you can't boot the machine, making this difficult. In this situation, external hardware (see hardware requirements above) is needed which can flash the SPI chip (where libreboot resides).
+ </p>
+ <p>
+ Remove those screws:<br/>
+ <img src="x60_unbrick/0000.jpg" alt="" />
+ </p>
+ <p>
+ Push the keyboard forward (carefully):<br/>
+ <img src="x60_unbrick/0001.jpg" alt="" />
+ </p>
+ <p>
+ Lift the keyboard up and disconnect it from the board:<br/>
+ <img src="x60_unbrick/0002.jpg" alt="" />
+ </p>
+ <p>
+ Grab the right-hand side of the chassis and force it off (gently) and pry up the rest of the chassis:<br/>
+ <img src="x60_unbrick/0003.jpg" alt="" />
+ </p>
+ <p>
+ You should now have this:<br/>
+ <img src="x60_unbrick/0004.jpg" alt="" />
+ </p>
+ <p>
+ Disconnect the wifi antenna cables, the modem cable and the speaker:<br/>
+ <img src="x60_unbrick/0005.jpg" alt="" />
+ </p>
+ <p>
+ Unroute the cables along their path, carefully lifting the tape that holds them in place. Then, disconnect the modem
+ cable (other end) and power connection and unroute all the cables so that they dangle by the monitor hinge on the right-hand
+ side:<br/>
+ <img src="x60_unbrick/0006.jpg" alt="" />
+ </p>
+ <p>
+ Disconnect the monitor from the motherboard, and unroute the grey antenna cable, carefully lifting the tape
+ that holds it into place:<br/>
+ <img src="x60_unbrick/0008.jpg" alt="" />
+ </p>
+ <p>
+ Carefully lift the remaining tape and unroute the left antenna cable so that it is loose:<br/>
+ <img src="x60_unbrick/0009.jpg" alt="" />
+ </p>
+ <p>
+ Remove the screw that is highlighted (do NOT remove the other one; it holds part of the heatsink (other side) into place):<br/>
+ <img src="x60_unbrick/0011.jpg" alt="" />
+ </p>
+ <p>
+ Remove those screws:<br/>
+ <img src="x60_unbrick/0012.jpg" alt="" />
+ </p>
+ <p>
+ Carefully remove the plate, like so:<br/>
+ <img src="x60_unbrick/0013.jpg" alt="" />
+ </p>
+ <p>
+ Remove the SATA connector:<br/>
+ <img src="x60_unbrick/0014.jpg" alt="" />
+ </p>
+ <p>
+ Now remove the motherboard (gently) and cast the lcd/chassis aside:<br/>
+ <img src="x60_unbrick/0015.jpg" alt="" />
+ </p>
+ <p>
+ Lift back that tape and hold it with something. Highlighted is the SPI flash chip:<br/>
+ <img src="x60_unbrick/0016.jpg" alt="" />
+ </p>
+ <p>
+ At this point, you should wire up your programmer according to it's documentation. For me, this was (see: "SparkFun cable pin reference"):<br/>
+ <a href="http://dangerousprototypes.com/docs/Common_Bus_Pirate_cable_pinouts" target="_blank">http://dangerousprototypes.com/docs/Common_Bus_Pirate_cable_pinouts</a>.<br/>
+ Correlating with the following information, I was able to wire up my pirate correctly:<br/>
+ <a href="http://flashrom.org/Bus_Pirate#Connections" target="_blank">http://flashrom.org/Bus_Pirate#Connections</a><br/>
+ And by following that advice:<br/>
+ <a href="http://www.coreboot.org/Board:lenovo/x60/Installation#Howto" target="_blank">http://www.coreboot.org/Board:lenovo/x60/Installation#Howto</a>.<br/>
+ Note: that last page says to wire up only those 5 pins (see below) like that: 1, 2, 4, 5, 6.<br/>
+ Note: and then, for power it says (on that coreboot.org page) to connect the power jack to the board and connect the
+ AC adapter (without powering on the board).<br/>
+ Note: I ignored that advice, and wired up all 8 pins. And it worked.<br/>
+
+ Here is the pinout (correlate it with your programmer's documentation):<br/>
+ <img src="x60_unbrick/0017.jpg" alt="" />
+ </p>
+
+ <p>
+ My programmer, usb cable and clip:<br/>
+ <img src="x60_unbrick/0018.jpg" alt="" /><br/>
+ My programmer (bus pirate):<br/>
+ <img src="x60_unbrick/0019.jpg" alt="" /><br/>
+ My clip (pomona 5250):<br/>
+ <img src="x60_unbrick/0020.jpg" alt="" /><br/>
+ My USB mini a to b cable:<br/>
+ <img src="x60_unbrick/0021.jpg" alt="" /><br/>
+ Connecting the pomona:<br/>
+ <img src="x60_unbrick/0022.jpg" alt="" /><br/>
+ Connecting the USB cable from programmer to 2nd(working/non-bricked) computer, my T60:<br/>
+ <img src="x60_unbrick/0024.jpg" alt="" /><br/>
+ Programmer is now active:<br/>
+ <img src="x60_unbrick/0023.jpg" alt="" /><br/>
+ Now I install flashrom on the T60 (running Trisquel GNU/Linux) and do this:<br/>
+ <b>flashrom -p buspirate_spi:dev=/dev/ttyUSB0 -w coreboot.rom</b><br/>
+ Note: this is using buspirate as the programmer, so it is flashing the X60, not the T60!<br/>
+ Here's my terminal window on the T60:<br/>
+ <img src="x60_unbrick/0025.jpg" alt="" /><br/>
+ So, you should see the following:<br/>
+ --
+ <pre>
+ flashrom v0.9.5.2-r1517 on Linux 3.2.0-61-generic (i686), built with libpci 3.1.8, GCC 4.6.3, little endian
+ flashrom is free software, get the source code at http://www.flashrom.org
+
+ Calibrating delay loop... delay loop is unreliable, trying to continue OK.
+ Found Macronix flash chip "MX25L1605" (2048 kB, SPI) on buspirate_spi.
+ Reading old flash chip contents... done.
+ Erasing and writing flash chip... Erase/write done.
+ Verifying flash... VERIFIED.
+ </pre>
+ --<br/>
+ At the end it says "VERIFIED", which means that the procedure worked. If you see this, it means
+ that you can put your X60 back together. So let's do that now.
+ </p>
+ <p>
+ Remove the programmer and put it away somewhere. Put back the tape and press firmly over it:<br/>
+ <img src="x60_unbrick/0026.jpg" alt="" />
+ </p>
+ <p>
+ Your empty chassis:<br/>
+ <img src="x60_unbrick/0027.jpg" alt="" />
+ </p>
+ <p>
+ Put the motherboard back in:<br/>
+ <img src="x60_unbrick/0028.jpg" alt="" />
+ </p>
+ <p>
+ Reconnect SATA:<br/>
+ <img src="x60_unbrick/0029.jpg" alt="" />
+ </p>
+ <p>
+ Put the plate back and re-insert those screws:<br/>
+ <img src="x60_unbrick/0030.jpg" alt="" />
+ </p>
+ <p>
+ Re-route that antenna cable around the fan and apply the tape:<br/>
+ <img src="x60_unbrick/0031.jpg" alt="" />
+ </p>
+ <p>
+ Route the cable here and then (not shown, due to error on my part) reconnect the monitor cable to the motherboard
+ and re-insert the screws:<br/>
+ <img src="x60_unbrick/0032.jpg" alt="" />
+ </p>
+ <p>
+ Re-insert that screw:<br/>
+ <img src="x60_unbrick/0033.jpg" alt="" />
+ </p>
+ <p>
+ Route the black antenna cable like so:<br/>
+ <img src="x60_unbrick/0034.jpg" alt="" />
+ </p>
+ <p>
+ Tuck it in neatly like so:<br/>
+ <img src="x60_unbrick/0035.jpg" alt="" />
+ </p>
+ <p>
+ Route the modem cable like so:<br/>
+ <img src="x60_unbrick/0036.jpg" alt="" />
+ </p>
+ <p>
+ Connect modem cable to board and tuck it in neatly like so:<br/>
+ <img src="x60_unbrick/0037.jpg" alt="" />
+ </p>
+ <p>
+ Route the power connection and connect it to the board like so:<br/>
+ <img src="x60_unbrick/0038.jpg" alt="" />
+ </p>
+ <p>
+ Route the antenna and modem cables neatly like so:<br/>
+ <img src="x60_unbrick/0039.jpg" alt="" />
+ </p>
+ <p>
+ Connect the wifi antenna cables. At the start of the tutorial, this machine had an Intel wifi chip. Here you see I've replaced it with an
+ Atheros AR5B95 (supports 802.11n and can be used without blobs):<br/>
+ <img src="x60_unbrick/0040.jpg" alt="" />
+ </p>
+ <p>
+ Connect the modem cable:<br/>
+ <img src="x60_unbrick/0041.jpg" alt="" />
+ </p>
+ <p>
+ Connect the speaker:<br/>
+ <img src="x60_unbrick/0042.jpg" alt="" />
+ </p>
+ <p>
+ You should now have this:<br/>
+ <img src="x60_unbrick/0043.jpg" alt="" />
+ </p>
+ <p>
+ Re-connect the upper chassis:<br/>
+ <img src="x60_unbrick/0044.jpg" alt="" />
+ </p>
+ <p>
+ Re-connect the keyboard:<br/>
+ <img src="x60_unbrick/0045.jpg" alt="" />
+ </p>
+ <p>
+ Re-insert the screws that you removed earlier:<br/>
+ <img src="x60_unbrick/0046.jpg" alt="" />
+ </p>
+ <p>
+ Power on!<br/>
+ <img src="x60_unbrick/0047.jpg" alt="" />
+ </p>
+ <p>
+ Trisquel live USB menu (using GRUB's ISOLINUX parser):<br/>
+ <img src="x60_unbrick/0048.jpg" alt="" />
+ </p>
+ <p>
+ Trisquel live desktop:<br/>
+ <img src="x60_unbrick/0049.jpg" alt="" />
+ </p>
+
+<hr/>
+
+ <p>
+ Copyright &copy; 2014 Francis Rowe, All Rights Reserved.<br/>
+ See <a href="../license.html">../license.html</a> for license conditions.
+ </p>
+
+</body>
+</html>