1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
|
/*
* gbe/gbe.h
* This file is part of the ich9deblob utility from the libreboot project
*
* Copyright (C) 2014 Steve Shenton <sgsit@libreboot.org>
* Francis Rowe <info@gluglug.org.uk>
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
/*
* Purpose: provide struct representing gbe region.
* Map actual buffers of this regions, directly to instances of these
* structs. This makes working with gbe really easy.
*/
/*
* bit fields used, corresponding to datasheet. See links to datasheets
* and documentation in ich9deblob.c
*/
#ifndef GBESTRUCT_H
#define GBESTRUCT_H
#include <stdio.h>
#include <string.h>
/* Size of the full gbe region in bytes */
#define GBEREGIONSIZE_8K 0x2000
/*
* Size of each sub-region in gbe.
* gbe contains two regions which
* can be identical: main and backup.
* These are each half the size of the full region
*/
#define GBEREGIONSIZE_4K 0x1000
/*
* When adding up the first 0x3F 16-bit words
* in a 4KiB GBE region, it should be equal
* to 0xBABA
*/
#define GBECHECKSUMTOTAL 0xBABA
/*
* These will have a modified descriptor+gbe based on what's in the factory.rom
* These will be joined into a single 12KiB buffer (descriptor, then gbe) and saved to a file
* NOTE: The GBE region of 8K is actually 2x 4K regions in a single region; both 4K blocks can be identical (and by default, are)
* The 2nd one is a "backup", but we don't know when it's used. perhaps it's used when the checksum on the first one does not match?
*/
/*
* ---------------------------------------------------------------------
* Gbe struct representing the data:
* ---------------------------------------------------------------------
*/
struct GBE_RESERVED_WORD_03H {
/* least significant bits */
unsigned char reserved1_0 : 8; /* bits should all be set to zero */
unsigned char reserved1_1 : 3; /* ^ part of above. Separated so that the bitfields align */
unsigned char ibaLom : 1; /* set to 1 for intel boot agent to work (i.e. set it to 0) */
unsigned char reserved2 : 4; /* bits should all be set to zero */
/* most significant bits */
};
/* Word 0A */
struct GBE_PCI_INITIALIZATION_CONTROL_WORD {
/* least significant bits */
unsigned char loadVendorDeviceId : 1; /* 1 = load from NVM. 0 = load from MAC fuses. It's 1 in my deblobbed_descriptor.bin */
unsigned char loadSubsystemId : 1; /* 1 = load from NVM. 0 = load from MAC fuses. It's 1 in my deblobbed_descriptor.bin */
unsigned char reserved1 : 1; /* Reserved. Set to 0 (according to datasheet). 0 in my deblobbed_descriptor.bin */
unsigned char reserved2 : 3; /* Reserved. Set them to 0 (according to datasheet). 0 in my deblobbed_descriptor.bin */
unsigned char pmEnable : 1; /* Power Management Enable. 1=Enable. It's 1 in my deblobbed_descriptor.bin */
unsigned char auxPwr : 1; /* Auxiliary Power Indication. See datasheet. it's 1 in my deblobbed_descriptor.bin */
unsigned char reserved3 : 4; /* Reserved. Set to 0000 (according to datasheet). */
unsigned char reserved4 : 4; /* Reserved. Set to 0001 (according to datasheet). */
/* most significant bits */
};
/* Word 10h. */
struct GBE_LAN_POWER_CONSUMPTION {
/* least significant bits */
unsigned char lanD3Power : 5; /* It's 00001b (0x1) in deblobbed_descriptor.bin */
unsigned char reserved : 3; /* Reserved. These bits should all be 0. confirmed from deblobbed_descriptor.bin */
unsigned char lanD0Power : 8; /* default value: 0x0D (according to datasheet). confirmed from deblobbed_descriptor.bin */
/* most significant bits */
};
/* Word 13h */
struct GBE_SHARED_INITIALIZATION_CONTROL_WORD {
/* least significant bits */
unsigned char reserved1 : 3; /* Reserved. These bits should be set to 101 (0x5) in binary (according to datasheet and deblobbed_descriptor.bin) */
unsigned char forceDuplex : 1; /* Hardware default is 0 according to datasheet and deblobbed_descriptor.bin. Presumably to set whether the chipset is to operate at full- or half-duplex */
unsigned char forceSpeedEnable : 1; /* Hardware default is 0. Presumably to limited speed eg 10, 10/100, 10/100/1000 */
unsigned char reserved2_0 : 3; /* Reserved. All bits should be set to 0 according to datasheet and deblobbed_descriptor.bin */
unsigned char reserved2_1 : 1; /* ^ part of above. separated so that bitfields align */
unsigned char phyPowerDownEnable : 1; /* PHY Power Down in D3/Dr (if WoL is disabled), 1 means Enable power down. deblobbed_descriptor.bin says 1 */
unsigned char reserved3 : 1; /* Reserved. Should be set to 1 according to datasheet and deblobbed_descriptor.bin */
unsigned char reserved4 : 3; /* Reserved. These bits should all be 0 according to datasheet and deblobbed_descriptor.bin */
/* ^ reserved4: indicates whether a valid NVM is present. If invalid, MAC does not read NVM and uses default values. */
/* 00 = invalid NVM, 01 = invalid NVM, 10 = valid NVM present, 11 = invalid NVM */
/* Default should be 10 (binary) according to datasheet and deblobbed_descriptor.bin */
unsigned char sign : 2; /* Make sure to set this to 0x2 (10 in binary) */
/* most significant bits */
};
/* Word 14h */
struct GBE_EXTENDED_CONFIGURATION_CONTROL_WORD_1 {
/* least significant bits */
unsigned short extendedConfigurationPointer: 12; /* dword: base address of extended configuration area in NVM. should not be zero. Default is 020h according to datasheet and deblobbed_descriptor.bin */
unsigned char oemWriteEnable : 1; /* 1=enable. if set, loads oem bits from phy_ctrl register to the 82567. loaded to EXTCNF_CTRL register. default is 1 according to datasheet and deblobbed_descriptor.bin */
unsigned char reserved1 : 1; /* Reserved. default value 1 according to datasheet and deblobed_descriptor.bin */
unsigned char reserved2 : 1; /* Reserved. default value 0 according to datasheet and deblobbed_descriptor.bin */
unsigned char reserved3 : 1; /* Reserved. default value 0 according to datasheet and deblobbed_descriptor.bin */
/* most significant bits */
};
/* Word 15h */
struct GBE_EXTENDED_CONFIGURATION_CONTROL_WORD_2 {
/* least significant bits */
unsigned char reserved : 8; /* Reserved. Should be 0 according to datasheet and deblobbed_descriptor.bin */
unsigned char extendedPhyLength : 8; /* dword: size of extended phy configuration area. most be 0 if phy config area is disabled. default is 0000101 (binary) or 05 (hex) according to datasheet, but 00001010 (0A) according to deblobbed_descriptor.bin. Is 0000101 (in the datasheet) a typo that actually means 00001010? */
/* most significant bits */
};
/*
* Word 17h: LED 1 Configuration and Power Management
*
* Default values for LEDCTL register fields controlling LED1 (LINK_1000)
* output behaviours and OEM fields that define PHY power management
* parameters loaded to the PHY_CTRL register.
*/
struct LED_CTL_1 {
/* least significant bits */
/* See page 16 in the datasheet to show the different modes. deblobbed_descriptor.bin has "ACTIVITY" mode set */
unsigned char led1Mode : 4; /* Default value 0111 (bin) 7 (hex) says datasheet. 1011 (bin) B (hex) according to deblobbed_descriptor.bin */
unsigned char reserved1 : 1; /* Reserved. Should be 0 according to datasheet and deblobbed_descriptor.bin */
unsigned char led1BlinkMode : 1; /* 0 = slow blink, 1 = fast blink. should be identical to led0 blink mode. Default is 0 according to datasheet and deblobbed_descriptor.bin */
/* By setting this and led0 blink mode (see word 18h) to 1, you could enable a faster blinking on the LED's where the ethernet cable goes
* on the gigabit ethernet port. Not really useful. Slow blink is fine, and probably better (the LED will probably last longer) */
unsigned char led1Invert : 1; /* initial value of LED1_IVRT field. 0 = led1 has active low output, 1 is high active output. Default is 0 according to datasheet and deblobbed_descriptor.bin */
unsigned char led1Blink : 1; /* 1 = led1 blinks, 0 = it does not. default 0 according to datasheet, but it's 1 in deblobbed_descriptor.bin */
unsigned char reserved2 : 1; /* Reserved. should be 1 according to datasheet and deblobbed_descriptor.bin */
unsigned char lpluEnable : 1; /* Low Power Link Up. Enable links at lowest supported speed by both link partners in all power states. 1=enabled(all power states), 0=disabled. Default is 0 according to datasheet and 1 according to deblobbed_descriptor.bin */
unsigned char lpluEnableNonD0a : 1; /* Low Power Link up (non-D0a states). Same as above but only for non-D0a states. default is 1 according to datasheet but 0 in deblobbed_descriptor.bin */
unsigned char gbeDisableNonD0a : 1; /* If set to 1, disable gigabit speeds in non-D0a power states. Must be 1 (according to datasheet) because GbE is not supported in Sx mode. It's also set to 1 in deblobbed_descriptor.bin */
unsigned char reserved3 : 2; /* Reserved. Datasheet says both bits should be 0 (confirmed in deblobbed_descriptor.bin) */
unsigned char gbeDisable : 1; /* When 1, gigabit speeds are disabled in all power states including D0a. Default is 0 according to datasheet and deblobbed_descriptor.bin */
unsigned char reserved4 : 1; /* Reserved. Should be 1, according to datasheet and deblobbed_descriptor.bin */
/* most significant bits */
};
/*
* Word 18: LED 0 and 2 Configuration Defaults
*
* Hardware defaults for LEDCTL register fields controlling LED0 (LINK/ACTIVITY)
* and LED2 (LINK_100) output behaviours.
*/
struct LED_CTL_02 {
/* least significant bits */
/* see page 16 in datasheet to show the different modes. deblobbed_descriptor has "LINK-UP" mode set */
unsigned char led0Mode : 4; /* default value 0100 (bin) or 4 (hex) according to datasheet. It's 0010 (bin) or 2 (hex) according to deblobbed_descriptor.bin */
unsigned char reserved1 : 1; /* Reserved. Should be set to 0 according to datasheet and deblobbed_descriptor.bin */
unsigned char led0BlinkMode : 1; /* This should be the same as led1BlinkMode (see word 17h). Default is 0 according to datasheet and deblobbed_descriptor.bin */
unsigned char led0Invert : 1; /* initial value of LED0_IVRT field. 0 = led0 has active low output, 1 is high active output. Default is 0 according to datasheet and deblobbed_descriptor.bin */
unsigned char led0Blink : 1; /* LED0_BLINK field. Should be 0 according to datasheet and deblobbed_descriptor.bin */
/* see page 16 in datasheet to shew the different modes. deblobbed_descriptor has "LINK_100" mode set */
unsigned char led2Mode : 4; /* default value 0110 (bin) or 6 (hex) according to datasheet and deblobbed_descriptor.bin */
unsigned char reserved2 : 1; /* Reserved. Should be 0 according to datasheet and deblobbed_descriptor.bin */
unsigned char led2BlinkMode : 1; /* 0 = slow blink. 1 = fast. default 0 according to datasheet and deblobbed_descriptor.bin */
unsigned char led2Invert : 1; /* LED2_IVRT field. Should be 0 according to datasheet and deblobbed_descriptor.bin */
unsigned char led2Blink : 1; /* LED2_BLINK field. should be 0 according to datasheet and deblobbed_descriptor.bin */
/* most significant bits */
};
struct GBEREGIONRECORD_4K {
unsigned char macAddress[6]; /* Word 00 to 02 */
struct GBE_RESERVED_WORD_03H reservedWord03h; /* Reserved word 03. */
unsigned short reservedWord04h; /* Reserved word 04: set it to 0xFFFF (according to datasheet) */
unsigned short reservedWord05h; /* Reserved word 05: 83 10 (little endian) in my deblobbed_descriptor.bin. Set this to 0x1083 (in C, assuming little endian byte order). "cannot be changed" according to datasheet */
unsigned short reservedWords06h07h[2]; /* Reserved words 06-07: set both to 0xFFFF (according to datasheet) */
/*
* Word 08 and 09 (pba low and pba high):
*
* Both of these should be set to 0xFFFF by default, according to the datasheet.
* "nine digit printed board assembly (PBA) number" for intel cards to be stored
* in a 4 byte (read: 2 word) field.
*
* Example: if pba number is 123456-003, then word 08 should be 1234h and word 09 becomes 5603.
* Note: 1234 and 5603 above are big endian. In the image it would actually be 34 12 and 0356
*
* Example: in mine it was (in the image): 08 10 FF FF. That becomes 1008h and FFFFh, or
* basically: 1008FF-0FF. The same was observed in another.
*
* Setting it to FF FF FF FF should be fine, according to the datasheet.
*/
unsigned short pbaLow; /* Word 08. Set it to 0x1008. */
unsigned short pbaHigh; /* Word 09. Set it to 0xFFFF. */
/* Word 0A */
struct GBE_PCI_INITIALIZATION_CONTROL_WORD pciInitializationControlWord;
/*
* Word 0B; subsystem ID
*
* If load subsystem ID bit of word 0A (pci init control word) is
* set to 1 (read: it is. in my deblobbed_descriptor.bin), store
* the subsystem id here. Datasheet says that the default value is
* 0000h, but you should set this to 20EEh (little endian: EE 20)
*/
unsigned short subsystemId; /* Set this to 0x20EE */
/*
* Word 0C; subsystem vendor ID
*
* If load subsystem vendor ID bit of word 0A (pci init control word)
* is set to 1 (read: it is. in my deblobbed_descriptor.bin), store
* the subsystem vendor id here. Datasheet says that the default
* value is 8086h, but you should set this to 17AAh (lendian: AA 17).
*/
unsigned short subsystemVendorId; /* Set this to 0x17AA */
/*
* Word 0D: device ID
*
* If load vendor/device ID in word 0A (pci init control word) is 1
* (it is) then this word is used to init device id using word 21h,
* 1Eh or 1Fh. In my case, deviceId is 0x10F5. Word 21h is set to
* 0x10CB, word 1Eh is 0x10F5 and 1Fh is 0x10BF
*
* The datasheet says that 10F5 is for Intel 82567LM gigabit ethernet
* controller; 10BF is for Intel 82567LF and 10CB is for Intel 82567V.
*
* Based on this, the X200 is shown to have the Intel 82567LM ethernet
* controller.
*/
unsigned short deviceId; /* Set this to 0x10F5. */
/* It is important that this is correct, for the linux kernel driver */
/*
* Word 0E: vendor ID
*
* If load vendor/device ID in word 0A (pci init control) is 1 (it is),
* then this word used read to initialize the PCI vendor ID. Default
* value is 8086 according to datasheets, and deblobbed_descriptor.bin.
*
* Intel is often 8086 as a PCI vendor ID. Because 8086. As in the CPU architecture.
*/
unsigned short vendorId;
unsigned short deviceRevId; /* Word 0F: reserved bits. Set all bits to 0. */
struct GBE_LAN_POWER_CONSUMPTION lanPowerConsumption; /* Word 10: LAN Power Consumption (see struct definition) */
unsigned short reservedWords11h12h[2]; /* Words 11-12: Reserved. Set both of them to 0x0000 (according to datasheet). */
/* Word 13: Shared Initialization Control Word */
struct GBE_SHARED_INITIALIZATION_CONTROL_WORD sharedInitializationControlWord;
/* Word 14: Extended Configuration Control Word 1 */
struct GBE_EXTENDED_CONFIGURATION_CONTROL_WORD_1 extendedConfigurationControlWord1;
/* Word 15: Extended Configuration Control Word 2 */
struct GBE_EXTENDED_CONFIGURATION_CONTROL_WORD_2 extendedConfigurationControlWord2;
/* Word 16: Extended Configuration Control Word 3 */
/* All bits reserved. Datasheet and deblobbed_descriptor.bin say to set it to zero */
unsigned short extendedConfigurationControlWord3;
struct LED_CTL_1 ledCtl1; /* Word 17: LED 1 Configuration and Power Management */
struct LED_CTL_02 ledCtl02; /* Word 18: LED 0 and 2 Configuration Defaults */
unsigned short reservedWord19h; /* Word 19: Reserved. Default is 0x2B00 according to datasheet, but in deblobbed_descriptor.bin it is 0x2B40 */
unsigned short reservedWord1Ah; /* Word 1A: Reserved. Default is 0x0043 according to datasheet and deblobbed_descriptor.bin */
unsigned short reservedWord1Bh; /* Word 1B: Reserved. Should be 0x0000 according to datasheet and deblobbed_descriptor.bin */
unsigned short reservedWord1Ch; /* Word 1C: Reserved. Should be 0x10F5 according to datasheet and deblobbed_descriptor.bin */
unsigned short reservedWord1Dh; /* Word 1D: Reserved. Should be 0xBAAD according to datasheet and deblobbed_descriptor.bin */
unsigned short _82567lmDeviceId;
unsigned short _82567lfDeviceId;
unsigned short reserved13;
unsigned short _82567vDeviceId;
unsigned short reserved14;
unsigned short reserved15;
unsigned short reserved16[12];
unsigned short pxeSoftwareRegion[15];
unsigned short checkSum; /* when added to the sum of all words above, this should match GBECHECKSUMTOTAL */
unsigned char padding1[3968];
};
/* main and backup region in gbe */
struct GBEREGIONRECORD_8K {
struct GBEREGIONRECORD_4K main;
struct GBEREGIONRECORD_4K backup;
/*
* Backup region:
* This is actually "main" on X200, since the real main has a bad checksum
* and other errors. You should do what you need on this one (if modifying
* lenovobios's gbe region) and then copy to main
*/
};
/*
* ---------------------------------------------------------------------
* Function declarations (keep gcc/make happy. check them in gbe.c)
* ---------------------------------------------------------------------
*/
unsigned short gbeGetRegionWordFrom8kBuffer(int index, char* regionData);
unsigned short gbeGetChecksumFrom8kBuffer(char* regionData, unsigned short desiredValue, int byteOffset);
unsigned short gbeGetChecksumFrom4kStruct(struct GBEREGIONRECORD_4K gbeStruct4k, unsigned short desiredValue);
struct GBEREGIONRECORD_8K deblobbedGbeStructFromFactory(struct GBEREGIONRECORD_8K factoryGbeStruct8k);
void printGbeChecksumDataFromStruct4k(struct GBEREGIONRECORD_4K gbeStruct4k, char* romName, char* regionName);
void printGbeChecksumDataFromStruct8k(struct GBEREGIONRECORD_8K gbeStruct8k, char* romName);
#endif
|
