blob: d078a48a8f9fff95144ea68e5f254fd09e0cead7 (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
|
USB
coreboot-4.0-7551-ge420139-dirty Wed Dec 10 16:34:05 GMT 2014 starting...
running main(bist = 0)
WARNING: Ignoring S4-assertion-width violation.
Stepping B3
2 CPU cores
AMT enabled
capable of DDR2 of 800 MHz or lower
VT-d enabled
GMCH: GS45, using high performance mode by default
TXT enabled
Render frequency: 533 MHz
IGD enabled
PCIe-to-GMCH enabled
GMCH supports DDR3 with 1067 MT or less
GMCH supports FSB with up to 1067 MHz
SMBus controller enabled.
0:50:ff
2:51:b
DDR mask 4, DDR 3
Bank 1 populated:
Raw card type: B
Row addr bits: 15
Col addr bits: 10
byte width: 1
page size: 1024
banks: 8
ranks: 1
tAAmin: 105
tCKmin: 12
Max clock: 666 MHz
CAS: 0x07e0
DIMMs support 666 MHz, but chipset only runs at up to 533. Limiting...
Trying CAS 7, tCK 15.
Found compatible clock / CAS pair: 533 / 7.
Timing values:
tCLK: 15
tRAS: 20
tRP: 7
tRCD: 7
tRFC: 104
tWR: 8
tRD: 11
tRRD: 4
tFAW: 20
tWL: 6
Changing memory frequency: old 3, new 6.
Setting IGD memory frequencies for VCO #1.
Memory configured in single-channel mode.
Memory map:
TOM = 128MB
TOLUD = 128MB
TOUUD = 128MB
REMAP: base = 65535MB
limit = 0MB
usedMEsize: 0MB
Performing Jedec initialization at address 0x00000000.
Final timings for group 0 on channel 1: 6.0.2.6.4
Final timings for group 1 on channel 1: 6.0.2.6.4
Final timings for group 2 on channel 1: 6.0.2.8.3
Final timings for group 3 on channel 1: 6.0.2.8.6
Lower bound for byte lane 0 on channel 1: 0.0
Upper bound for byte lane 0 on channel 1: 10.4
Final timings for byte lane 0 on channel 1: 5.2
Lower bound for byte lane 1 on channel 1: 0.0
Upper bound for byte lane 1 on channel 1: 11.2
Final timings for byte lane 1 on channel 1: 5.5
Lower bound for byte lane 2 on channel 1: 0.0
Upper bound for byte lane 2 on channel 1: 10.5
Final timings for byte lane 2 on channel 1: 5.2
Lower bound for byte lane 3 on channel 1: 0.0
Upper bound for byte lane 3 on channel 1: 9.7
Final timings for byte lane 3 on channel 1: 4.7
Timing overflow during read training.
Read training failure: lower bound.
USB
coreboot-4.0-7551-ge420139-dirty Wed Dec 10 16:34:05 GMT 2014 starting...
running main(bist = 0)
Interrupted RAM init, reset required.
USB
coreboot-4.0-7551-ge420139-dirty Wed Dec 10 16:34:05 GMT 2014 starting...
running main(bist = 0)
Stepping B3
2 CPU cores
AMT enabled
capable of DDR2 of 800 MHz or lower
VT-d enabled
GMCH: GS45, using high performance mode by default
TXT enabled
Render frequency: 533 MHz
IGD enabled
PCIe-to-GMCH enabled
GMCH supports DDR3 with 1067 MT or less
GMCH supports FSB with up to 1067 MHz
SMBus controller enabled.
0:50:ff
2:51:b
DDR mask 4, DDR 3
Bank 1 populated:
Raw card type: B
Row addr bits: 15
Col addr bits: 10
byte width: 1
page size: 1024
banks: 8
ranks: 1
tAAmin: 105
tCKmin: 12
Max clock: 666 MHz
CAS: 0x07e0
DIMMs support 666 MHz, but chipset only runs at up to 533. Limiting...
Trying CAS 7, tCK 15.
Found compatible clock / CAS pair: 533 / 7.
Timing values:
tCLK: 15
tRAS: 20
tRP: 7
tRCD: 7
tRFC: 104
tWR: 8
tRD: 11
tRRD: 4
tFAW: 20
tWL: 6
Setting IGD memory frequencies for VCO #1.
Memory configured in single-channel mode.
Memory map:
TOM = 128MB
TOLUD = 128MB
TOUUD = 128MB
REMAP: base = 65535MB
limit = 0MB
usedMEsize: 0MB
Performing Jedec initialization at address 0x00000000.
Final timings for group 0 on channel 1: 6.0.2.7.6
Final timings for group 1 on channel 1: 6.0.2.6.6
Final timings for group 2 on channel 1: 6.0.2.8.7
Final timings for group 3 on channel 1: 6.1.0.2.5
Lower bound for byte lane 0 on channel 1: 0.0
Upper bound for byte lane 0 on channel 1: 10.3
Final timings for byte lane 0 on channel 1: 5.1
Lower bound for byte lane 1 on channel 1: 0.0
Upper bound for byte lane 1 on channel 1: 11.3
Final timings for byte lane 1 on channel 1: 5.5
Lower bound for byte lane 2 on channel 1: 0.0
Upper bound for byte lane 2 on channel 1: 10.5
Final timings for byte lane 2 on channel 1: 5.2
Lower bound for byte lane 3 on channel 1: 0.0
Upper bound for byte lane 3 on channel 1: 9.6
Final timings for byte lane 3 on channel 1: 4.7
Timing overflow during read training.
Read training failure: lower bound.
|
