summaryrefslogtreecommitdiffstats
path: root/docs/install/bbb_setup.html
blob: 9156196c155e1e630bca014952167d69bf8b89aa (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
<!DOCTYPE html>
<html>
<head>
	<meta charset="utf-8">
	<meta name="viewport" content="width=device-width, initial-scale=1">

	<style type="text/css">
		@import url('../css/main.css');
	</style>

	<title>How to programme an SPI flash chip with the BeagleBone Black</title>
</head>

<body>

	<div class="section">
		<h1 id="pagetop">How to programme an SPI flash chip with the BeagleBone Black</h1>
			<p>
				This document exists as a guide for reading from or writing to an SPI flash chip with the BeagleBone Black,
				using the <a href="http://flashrom.org/Flashrom">flashrom</a> software. 
				BeagleBone Black rev. C was used when creating this guide, but earlier revisions
				may also work.
			</p>
			<p><a href="index.html">Back to previous index</a></p>
	</div>

	<div class="section" id="hardware_requirements">

		<h1>Hardware requirements</h1>
		
			<p>
				Shopping list (pictures of this hardware is shown later):
			</p>
				<ul>
					<li>
						External SPI programmer: <b>BeagleBone Black</b> (rev. C)
						is highly recommended. Sometimes referred to as 'BBB'.
						<a href="http://beagleboard.org/black">This page</a> contains a list of distributors.
						farnell sells them - <a href="http://farnell.com/">http://farnell.com/</a>
						- If you can't get a BBB, there are other programmers listed on flashrom.org, but
						not all of them will be suitable for libreboot's purpose. (some may also require blobs).
						There are also some programmers not listed on flashrom.org, that can also work.
						A BB (original beaglebone) should work as well, though you might have to replace the distro
						that it came with.
					</li>
					<li>
						Electrical/insulative tape: cover the entire bottom surface of the BBB (the part that
						rests on a surface). This is important, when placing the BBB on top of a board
						so that nothing shorts. - easy to find in most hardware/electronics stores
					</li>
					<li>
						Clip for connecting to the flash chip: if you have a SOIC-16
						flash chip (16 pins), you will need the <b>Pomona 5252</b>
						or equivalent. For SOIC-8 flash chips (8 pins), you will
						need the <b>Pomona 5250</b> or equivalent. Do check which chip you have,
						before ordering a clip. Also, make sure to buy at least two clips
						(they break easily).
						- Farnell sells these, and ships to many countries. <a href="http://farnell.com/">http://farnell.com/</a>
						- Some people find these difficult to get, especially in South America. If you have more links to suppliers, 
						please contact the libreboot project with the relevant information.
					</li>
					<li>
						<b>External 3.3V DC power supply</b>, for powering the flash chip.
						An ATX power supply / PSU (common on Intel/AMD desktop computers) will work for this.
						A lab PSU (DC) will also work (adjusted to 3.3V). Etc.
						<ul>
							<li>Getting a multimeter might be worthwhile, to verify that it's supplying 3.3V</li>
						</ul>
					</li>
					<li>
						<b>External 5V DC power supply</b> (barrel connector), for powering the BBB.
						The BeagleBone can have power supplied via USB, but a
						dedicated power supply is recommended.  These should be easy to find in most places
						that sell electronics. - <b>OPTIONAL. Only needed if not powering with the USB cable, or if you want
						to use <a href="bbb_ehci.html">EHCI debug</a></b>
					</li>
					<li>
						<b>Pin header / jumper cables</b> (2.54mm / 0.1&quot; headers)
						You should get male-male, male-female and female-female
						cables in 10cm and 20cm sizes. Just get a load of them.
						other possible names for these cables:
						<ul>
							<li>flying leads</li>
							<li>dupont (this is just one possible brand name)</li>
							<li>Often used on breadboards, so they might be called breadboard cables</li>
							<li>Maybe they are called <b>wires</b> instead of cables or leads</li>
							<li>They are also the same cables used on the GPIOs on the RPi</li>
							<li><b>adafruit.com</b> sells them, and there are others</li>
							<li><b>Some people find these difficult to buy. Contact the libreboot project if you have more links to sellers.</b></li>
							<li>You might also be able to make these cables yourself.</li>
						</ul>
					</li>
					<li>
						<b>Mini USB A-B cable</b> (the BeagleBone probably already comes
						with one.) - <b>OPTIONAL - only needed for <a href="bbb_ehci.html">EHCI debug</a> or for serial/ssh access without ethernet cable (g_multi kernel module)</b>
					</li>
					<li>
						<b>FTDI TTL cable or debug board</b>, for accessing the serial console on your BBB.
						<a href="http://elinux.org/Beagleboard:BeagleBone_Black_Serial">This page</a> contains
						a list. - <b>OPTIONAL - only needed for serial console on the BBB, if not using SSH via ethernet cable</b>
					</li>
				</ul>
		
			<p>
				<a href="#pagetop">Back to top of page.</a>
			</p>
			
	</div>
		
	<div class="section" id="psu33">

		<h1>Setting up the 3.3V DC PSU</h1>

			<p>
				ATX PSU pinouts are on <a href="https://en.wikipedia.org/wiki/Power_supply_unit_%28computer%29#Wiring_diagrams">wikipedia</a>
			</p>
			<p>
				You can use pin 1 or 2 (orange wire) on a 20-pin or 24-pin ATX PSU for 3.3V, 
				and any of the ground/earth sources (black cables) for ground.
				Short PS_ON# / Power on (green wire. pin 16 on 24-pin ATX PSU, or pin 14 on a 20-pin ATX PSU) to a ground 
				(black. there is one right next to it) using a wire/paperclip/jumper then
				power on the PSU by grounding PS_ON# (this is also how an ATX motherboard turns on a PSU).
			</p>
			<p>
				<b>DO **NOT** use pin 4, 6, do **NOT** use pin 19 or 20 (on a 20-pin ATX PSU), and
				DO **NOT** use pin 21, 22 or 23 (on a 24-pin ATX PSU). Those wires (the red ones) are 5V, and they **WILL**
				kill your flash chip. ***NEVER*** supply more than 3.3V to your flash chip.
				(that is, if it's a 3.3V flash chip. 5V and 1.8V SPI flash chips do exist, but they are rare. always
				check what voltage your chip takes. most take 3.3V)</b>
			</p>
			<p>
				You only need one 3.3V supply and one ground for the flash chip, after grounding PS_ON#.
			</p>
			
			<p>
				The male end of a 0.1&quot; or 2.54mm header cable is not thick enough to remain permanently
				connected to the ATX PSU on its own.
				When connecting header cables to the connector on the ATX PSU, use a female end attached to
				a thicker piece of wire (you could use a paper clip), or wedge the male end of the jumper cable
				into the sides of the hole in the connector, instead of going through the centre.
			</p>
			
			<p>
				Here is an example set up:<br/>
				<img src="images/x200/psu33.jpg" alt="" title="Copyright &copy; 2015 Patrick &quot;P. J.&quot; McDermott &lt;pj@pehjota.net&gt; see license notice at the end of this document" />
			</p>
			
	</div>
	
	<div class="section" id="bbb_access">
		
		<h1>Accessing the operating system on the BBB</h1>
			<p>
				The operating system on your BBB will probably have an SSH daemon
				running where the root account has no password. Use SSH to access
				the operating system and set a root password. By default, the OS
				on your BBB will most likely use DHCP, so it should already have an IP
				address.
			</p>
			<p>
				You will also be using the OS on your BBB for programming an SPI flash chip.
			</p>
			<h2>Alternatives to SSH (in case SSH fails)</h2>
				<p>
					You can also use a serial FTDI debug board with GNU Screen, to access the serial console.<br/>
					# <b>screen /dev/ttyUSB0 115200</b><br/>
					Here are some example photos:<br/>
					<img src="images/x200/ftdi.jpg" alt="" />
					<img src="images/x200/ftdi_port.jpg" alt="" /><br/>
				</p>
				<p>
					You can also connect the USB cable from the BBB to another computer and a new network interface will appear,
					with its own IP address. This is directly accessible from SSH, or screen:<br/>
					# <b>screen /dev/ttyACM0 115200</b>
				</p>
				<p>
					You can also access the uboot console, using the serial method
					instead of SSH.
				</p>
			
	</div>
	
	<div class="section" id="spidev">
		
		<h1>Setting up spidev on the BBB</h1>
		
			<p>
				Log on as root on the BBB, using either SSH or a serial console as defined in
				<a href="#bbb_access">#bbb_access</a>. Make sure that you have internet access
				on your BBB.
			</p>
		
			<p>
				Follow the instructions at <a href="http://elinux.org/BeagleBone_Black_Enable_SPIDEV#SPI0">http://elinux.org/BeagleBone_Black_Enable_SPIDEV#SPI0</a>
				up to (and excluding) the point where it tells you to modify uEnv.txt
			</p>
			<p>
				You need to update the software on the BBB first. If you have an
				element14 brand BBB (sold by Premier Farnell plc. stores like
				Farnell element14, Newark element14, and Embest), you may need
				to <a href="https://groups.google.com/forum/?_escaped_fragment_=msg/beagleboard/LPjCn4LEY2I/alozBGsbTJMJ#!msg/beagleboard/LPjCn4LEY2I/alozBGsbTJMJ">work around a bug</a>
				in the LED aging init script before you can update your
				software. If you don't have a file named
				/etc/init.d/led_aging.sh, you can skip this step and update your
				software as described below. Otherwise, replace the contents of
				this file with:
			</p>
<pre>
#!/bin/sh -e
### BEGIN INIT INFO
# Provides:          led_aging.sh
# Required-Start:    $local_fs
# Required-Stop:     $local_fs
# Default-Start:     2 3 4 5
# Default-Stop:      0 1 6
# Short-Description: Start LED aging
# Description:       Starts LED aging (whatever that is)
### END INIT INFO

x=$(/bin/ps -ef | /bin/grep "[l]ed_acc")
if [ ! -n "$x" -a -x /usr/bin/led_acc ]; then
    /usr/bin/led_acc &amp;
fi
</pre>
			</p>
				Run <b>apt-get update</b> and <b>apt-get upgrade</b> then reboot the BBB, before continuing.
			</p>

			<p>
				Check that the firmware exists:<br/>
				# <b>ls /lib/firmware/BB-SPI0-01-00A0.*</b><br/>
				Output:
			</p>
<pre>
/lib/firmware/BB-SPI0-01-00A0.dtbo
</pre>
			<p>
				Then:<br/>
				# <b>echo BB-SPI0-01 &gt; /sys/devices/bone_capemgr.*/slots</b><br/>
				# <b>cat /sys/devices/bone_capemgr.*/slots</b><br/>
				Output:
			</p>
<pre>
 0: 54:PF--- 
 1: 55:PF--- 
 2: 56:PF--- 
 3: 57:PF--- 
 4: ff:P-O-L Bone-LT-eMMC-2G,00A0,Texas Instrument,BB-BONE-EMMC-2G
 5: ff:P-O-L Bone-Black-HDMI,00A0,Texas Instrument,BB-BONELT-HDMI
 7: ff:P-O-L Override Board Name,00A0,Override Manuf,BB-SPI0-01
</pre>

			<p>
				Verify that the spidev device now exists:<br/>
				# <b>ls -al /dev/spid*</b><br/>
				Output:
			</p>
<pre>
crw-rw---T 1 root spi 153, 0 Nov 19 21:07 /dev/spidev1.0
</pre>
			<p>
				Now the BBB is ready to be used for flashing. Make this persist
				across reboots:<br/>
				In /etc/default/capemgr add <b>CAPE=BB-SPI0-01</b> at the end
				(or change the existing <b>CAPE=</b> entry to say that, if an
				entry already exists.
			</p>
			<p>
				Get flashrom from the libreboot_util release archive, or build it from libreboot_src/git if you need to.
				An ARM binary (statically compiled) for flashrom exists in libreboot_util releases. Put the flashrom binary
				on your BBB.
			</p>
			<p>
				You may also need ich9gen, if you will be flashing an ICH9-M laptop (such as the X200). Get it from libreboot_util,
				or build it from libreboot_src, and put the ARM binary for it on your BBB.
			</p>
			<p>
				Finally, get the ROM image that you would like to flash and put that on your BBB.
			</p>
			
			<p>
				Now test flashrom:<br/>
				# <b>./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512</b><br/>
				Output:
			</p>
<pre>
Calibrating delay loop... OK.
No EEPROM/flash device found.
Note: flashrom can never write if the flash chip isn't found automatically.
</pre>

			<p>
				This means that it's working (the clip isn't connected to any flash chip,
				so the error is fine).
			</p>
			
	</div>
	
	<div class="section" id="clip">
			
		<h1>
			Connecting the Pomona 5250/5252
		</h1>
			<p>
				Use this image for reference when connecting the pomona to the BBB:
				<a href="http://beagleboard.org/Support/bone101#headers">http://beagleboard.org/Support/bone101#headers</a>
				(D0 = MISO or connects to MISO).
			</p>
		
			<p>
				The following shows how to connect clip to the BBB	(on the P9 header), for SOIC-16 (clip: Pomona 5252):
			</p>
<pre>
 NC              -       - 21
 1               -       - 17
 NC              -       - NC
 NC              -       - NC
 NC              -       - NC
 NC              -       - NC
 18              -       - 3.3V (PSU)
 22              -       - NC - this is pin 1 on the flash chip
<i>This is how you will connect. Numbers refer to pin numbers on the BBB, on the plugs near the DC jack.</i>

You may also need to connect pins 1 and 9 (tie to 3.3V supply). These are HOLD# and WP#.
On some systems they are held high, if the flash chip is attached to the board.
If you're flashing a chip that isn't connected to a board, you'll almost certainly
have to connect them.

SOIC16 pinout (more info available online, or in the datasheet for your flash chip):
HOLD	1-16	SCK
VDD	2-15	MOSI
N/C	3-14	N/C
N/C	4-13	N/C
N/C	5-12	N/C
N/C	6-11	N/C
SS	7-10	GND
MISO	8-9	WP
</pre>
			<p>
				The following shows how to connect clip to the BBB	(on the P9 header), for SOIC-8 (clip: Pomona 5250):
			</p>
<pre>
 18              -       - 1
 22              -       - NC
 NC              -       - 21
 3.3V (PSU)      -       - 17 - this is pin 1 on the flash chip
<i>This is how you will connect. Numbers refer to pin numbers on the BBB, on the plugs near the DC jack.</i>

You may also need to connect pins 3 and 7 (tie to 3.3V supply). These are HOLD# and WP#.
On some systems they are held high, if the flash chip is attached to the board.
If you're flashing a chip that isn't connected to a board, you'll almost certainly
have to connect them.

SOIC8 pinout (more info available online, or in the datasheet for your flash chip):
SS	1-8	VDD
MISO	2-7	HOLD
WP	3-6	SCK
GND	4-5	MOSI
</pre>
			<p>
				<b>NC = no connection</b>
			</p>
			<p>
				<b><u>DO NOT</u> connect 3.3V (PSU) yet. ONLY connect this once the pomona is connected to the flash chip.</b>
			</p>
			<p>
				<b>You also need to connect the BLACK wire (ground/earth) from the 3.3V PSU to pin 2 on the BBB (P9 header). 
				It is safe to install this now
				(that is, before you connect the pomona to the flash chip); in fact, you should.</b>
			</p>
			<p>
				if you need to extend the 3.3v psu leads, just use the same colour M-F leads, <b>but</b> keep all other 
				leads short (10cm or less)
			</p>
			
			<p>
				You should now have something that looks like this:<br/>
				<img src="images/x200/5252_bbb0.jpg" alt="" />
				<img src="images/x200/5252_bbb1.jpg" alt="" />
			</p>
			
		<p>
			<a href="#pagetop">Back to top of page.</a>
		</p>
		
	</div>
	
	<div class="section">
	
		<h1 id="stability">Notes about stability</h1>
			
			<p>
				<a href="http://flashrom.org/ISP">http://flashrom.org/ISP</a> 
				is what we typically do in libreboot, though not always. That page
				has some notes about using resistors to affect stability. Currently,
				we use spispeed=512 (512kHz) but it is possible to use higher speeds while
				maintaining stability.
			</p>
			
			<p>
				tty0_ in #libreboot was able to get better flashing speeds with the following configuration:
			</p>
				<ul>
					<li>&quot;coax&quot; with 0.1 mm core  and aluminum foley (from my kitchen), add 100 Ohm resistors (serial)</li>
					<li>put heatshrink above the foley, for: CS, CLK, D0, D1</li>
					<li>Twisted pair used as core (in case more capacitors are needed)</li>
					<li>
						See this image: 
						<a href="http://i.imgur.com/qHGxKpj.jpg">http://i.imgur.com/qHGxKpj.jpg</a>
					</li>
					<li>He was able to flash at 50MHz (lower speeds are also fine).</li>
				</ul>
	
	</div>

	<div class="section">

		<p>
			Copyright &copy;  2014, 2015 Francis Rowe &lt;info@gluglug.org.uk&gt;<br/>
			Copyright &copy; 2015 Patrick &quot;P. J.&quot; McDermott &lt;pj@pehjota.net&gt;<br/>
			Permission is granted to copy, distribute and/or modify this document
			under the terms of the GNU Free Documentation License, Version 1.3
			or any later version published by the Free Software Foundation;
			with no Invariant Sections, no Front-Cover Texts, and no Back-Cover Texts.
			A copy of the license can be found at <a href="../gfdl-1.3.txt">../gfdl-1.3.txt</a>
		</p>

		<p>
			Updated versions of the license (when available) can be found at
			<a href="https://www.gnu.org/licenses/licenses.html">https://www.gnu.org/licenses/licenses.html</a>
		</p>

		<p>
			UNLESS OTHERWISE SEPARATELY UNDERTAKEN BY THE LICENSOR, TO THE
			EXTENT POSSIBLE, THE LICENSOR OFFERS THE LICENSED MATERIAL AS-IS
			AND AS-AVAILABLE, AND MAKES NO REPRESENTATIONS OR WARRANTIES OF
			ANY KIND CONCERNING THE LICENSED MATERIAL, WHETHER EXPRESS,
			IMPLIED, STATUTORY, OR OTHER. THIS INCLUDES, WITHOUT LIMITATION,
			WARRANTIES OF TITLE, MERCHANTABILITY, FITNESS FOR A PARTICULAR
			PURPOSE, NON-INFRINGEMENT, ABSENCE OF LATENT OR OTHER DEFECTS,
			ACCURACY, OR THE PRESENCE OR ABSENCE OF ERRORS, WHETHER OR NOT
			KNOWN OR DISCOVERABLE. WHERE DISCLAIMERS OF WARRANTIES ARE NOT
			ALLOWED IN FULL OR IN PART, THIS DISCLAIMER MAY NOT APPLY TO YOU.
		</p>
		<p>
			TO THE EXTENT POSSIBLE, IN NO EVENT WILL THE LICENSOR BE LIABLE
			TO YOU ON ANY LEGAL THEORY (INCLUDING, WITHOUT LIMITATION,
			NEGLIGENCE) OR OTHERWISE FOR ANY DIRECT, SPECIAL, INDIRECT,
			INCIDENTAL, CONSEQUENTIAL, PUNITIVE, EXEMPLARY, OR OTHER LOSSES,
			COSTS, EXPENSES, OR DAMAGES ARISING OUT OF THIS PUBLIC LICENSE OR
			USE OF THE LICENSED MATERIAL, EVEN IF THE LICENSOR HAS BEEN
			ADVISED OF THE POSSIBILITY OF SUCH LOSSES, COSTS, EXPENSES, OR
			DAMAGES. WHERE A LIMITATION OF LIABILITY IS NOT ALLOWED IN FULL OR
			IN PART, THIS LIMITATION MAY NOT APPLY TO YOU.
		</p>
		<p>
			The disclaimer of warranties and limitation of liability provided
			above shall be interpreted in a manner that, to the extent
			possible, most closely approximates an absolute disclaimer and
			waiver of all liability.
		</p>
		
	</div>

</body>
</html>