diff options
Diffstat (limited to 'resources/libreboot/patch/coreboot/33fb4cf0ffb01be8bcb6b488872c87eb50e7d77f/grub/kgpe-d16/0003-drivers-i2c-w83795-Add-full-support-for-core-functio.patch')
| -rw-r--r-- | resources/libreboot/patch/coreboot/33fb4cf0ffb01be8bcb6b488872c87eb50e7d77f/grub/kgpe-d16/0003-drivers-i2c-w83795-Add-full-support-for-core-functio.patch | 725 |
1 files changed, 0 insertions, 725 deletions
diff --git a/resources/libreboot/patch/coreboot/33fb4cf0ffb01be8bcb6b488872c87eb50e7d77f/grub/kgpe-d16/0003-drivers-i2c-w83795-Add-full-support-for-core-functio.patch b/resources/libreboot/patch/coreboot/33fb4cf0ffb01be8bcb6b488872c87eb50e7d77f/grub/kgpe-d16/0003-drivers-i2c-w83795-Add-full-support-for-core-functio.patch deleted file mode 100644 index 0cbdaf6..0000000 --- a/resources/libreboot/patch/coreboot/33fb4cf0ffb01be8bcb6b488872c87eb50e7d77f/grub/kgpe-d16/0003-drivers-i2c-w83795-Add-full-support-for-core-functio.patch +++ /dev/null @@ -1,725 +0,0 @@ -From 72d183bad6db0f2f91b991710d1c0a8113a071f3 Mon Sep 17 00:00:00 2001 -From: Timothy Pearson <tpearson@raptorengineeringinc.com> -Date: Sat, 5 Sep 2015 17:53:20 -0500 -Subject: [PATCH 003/143] drivers/i2c/w83795: Add full support for core - functions - -Add full support for fan control, fan monitoring, and voltage -monitoring. Fan speeds and functions are configurable via -each mainboard's devicetree.cb file. - -NOTE: This patch effectively rewrites large portions of -the original driver. You may need to re-verify correct -operation on your hardware if you were using the old -driver code. - -Change-Id: I3e246af0e398d65ee43ea708060885c67fd7d202 -Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> ---- - src/drivers/i2c/w83795/chip.h | 142 ++++++++++++++++ - src/drivers/i2c/w83795/w83795.c | 339 ++++++++++++++++++++++++++------------- - src/drivers/i2c/w83795/w83795.h | 52 ++++-- - 3 files changed, 405 insertions(+), 128 deletions(-) - create mode 100644 src/drivers/i2c/w83795/chip.h - -diff --git a/src/drivers/i2c/w83795/chip.h b/src/drivers/i2c/w83795/chip.h -new file mode 100644 -index 0000000..c8a42ea ---- /dev/null -+++ b/src/drivers/i2c/w83795/chip.h -@@ -0,0 +1,142 @@ -+/* -+ * This file is part of the coreboot project. -+ * -+ * Copyright (C) 2015 Raptor Engineering -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; version 2 of the License. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc. -+ */ -+ -+struct drivers_i2c_w83795_config { -+ uint8_t fanin_ctl1; -+ uint8_t fanin_ctl2; -+ -+ uint8_t temp_ctl1; -+ uint8_t temp_ctl2; -+ uint8_t temp_dtse; -+ -+ uint8_t volt_ctl1; -+ uint8_t volt_ctl2; -+ -+ uint8_t temp1_fan_select; -+ uint8_t temp2_fan_select; -+ uint8_t temp3_fan_select; -+ uint8_t temp4_fan_select; -+ uint8_t temp5_fan_select; -+ uint8_t temp6_fan_select; -+ -+ uint8_t temp1_source_select; -+ uint8_t temp2_source_select; -+ uint8_t temp3_source_select; -+ uint8_t temp4_source_select; -+ uint8_t temp5_source_select; -+ uint8_t temp6_source_select; -+ -+ uint32_t vcore1_high_limit_mv; /* mV */ -+ uint32_t vcore1_low_limit_mv; /* mV */ -+ uint32_t vcore2_high_limit_mv; /* mV */ -+ uint32_t vcore2_low_limit_mv; /* mV */ -+ uint32_t vtt_high_limit_mv; /* mV */ -+ uint32_t vtt_low_limit_mv; /* mV */ -+ uint32_t vsen3_high_limit_mv; /* mV */ -+ uint32_t vsen3_low_limit_mv; /* mV */ -+ uint32_t vsen4_high_limit_mv; /* mV */ -+ uint32_t vsen4_low_limit_mv; /* mV */ -+ uint32_t vsen5_high_limit_mv; /* mV */ -+ uint32_t vsen5_low_limit_mv; /* mV */ -+ uint32_t vsen6_high_limit_mv; /* mV */ -+ uint32_t vsen6_low_limit_mv; /* mV */ -+ uint32_t vsen7_high_limit_mv; /* mV */ -+ uint32_t vsen7_low_limit_mv; /* mV */ -+ uint32_t vsen8_high_limit_mv; /* mV */ -+ uint32_t vsen8_low_limit_mv; /* mV */ -+ uint32_t vsen9_high_limit_mv; /* mV */ -+ uint32_t vsen9_low_limit_mv; /* mV */ -+ uint32_t vsen10_high_limit_mv; /* mV */ -+ uint32_t vsen10_low_limit_mv; /* mV */ -+ uint32_t vsen11_high_limit_mv; /* mV */ -+ uint32_t vsen11_low_limit_mv; /* mV */ -+ uint32_t vsen12_high_limit_mv; /* mV */ -+ uint32_t vsen12_low_limit_mv; /* mV */ -+ uint32_t vsen13_high_limit_mv; /* mV */ -+ uint32_t vsen13_low_limit_mv; /* mV */ -+ uint32_t vdd_high_limit_mv; /* mV */ -+ uint32_t vdd_low_limit_mv; /* mV */ -+ uint32_t vsb_high_limit_mv; /* mV */ -+ uint32_t vsb_low_limit_mv; /* mV */ -+ uint32_t vbat_high_limit_mv; /* mV */ -+ uint32_t vbat_low_limit_mv; /* mV */ -+ -+ int8_t tr1_critical_temperature; /* °C */ -+ int8_t tr1_critical_hysteresis; /* °C */ -+ int8_t tr1_warning_temperature; /* °C */ -+ int8_t tr1_warning_hysteresis; /* °C */ -+ int8_t tr2_critical_temperature; /* °C */ -+ int8_t tr2_critical_hysteresis; /* °C */ -+ int8_t tr2_warning_temperature; /* °C */ -+ int8_t tr2_warning_hysteresis; /* °C */ -+ int8_t tr3_critical_temperature; /* °C */ -+ int8_t tr3_critical_hysteresis; /* °C */ -+ int8_t tr3_warning_temperature; /* °C */ -+ int8_t tr3_warning_hysteresis; /* °C */ -+ int8_t tr4_critical_temperature; /* °C */ -+ int8_t tr4_critical_hysteresis; /* °C */ -+ int8_t tr4_warning_temperature; /* °C */ -+ int8_t tr4_warning_hysteresis; /* °C */ -+ int8_t tr5_critical_temperature; /* °C */ -+ int8_t tr5_critical_hysteresis; /* °C */ -+ int8_t tr5_warning_temperature; /* °C */ -+ int8_t tr5_warning_hysteresis; /* °C */ -+ int8_t tr6_critical_temperature; /* °C */ -+ int8_t tr6_critical_hysteresis; /* °C */ -+ int8_t tr6_warning_temperature; /* °C */ -+ int8_t tr6_warning_hysteresis; /* °C */ -+ int8_t dts_critical_temperature; /* °C */ -+ int8_t dts_critical_hysteresis; /* °C */ -+ int8_t dts_warning_temperature; /* °C */ -+ int8_t dts_warning_hysteresis; /* °C */ -+ -+ int8_t temp1_critical_temperature; /* °C */ -+ int8_t temp2_critical_temperature; /* °C */ -+ int8_t temp3_critical_temperature; /* °C */ -+ int8_t temp4_critical_temperature; /* °C */ -+ int8_t temp5_critical_temperature; /* °C */ -+ int8_t temp6_critical_temperature; /* °C */ -+ -+ int8_t temp1_target_temperature; /* °C */ -+ int8_t temp2_target_temperature; /* °C */ -+ int8_t temp3_target_temperature; /* °C */ -+ int8_t temp4_target_temperature; /* °C */ -+ int8_t temp5_target_temperature; /* °C */ -+ int8_t temp6_target_temperature; /* °C */ -+ -+ uint8_t fan1_nonstop; /* % of full speed (0-100) */ -+ uint8_t fan2_nonstop; /* % of full speed (0-100) */ -+ uint8_t fan3_nonstop; /* % of full speed (0-100) */ -+ uint8_t fan4_nonstop; /* % of full speed (0-100) */ -+ uint8_t fan5_nonstop; /* % of full speed (0-100) */ -+ uint8_t fan6_nonstop; /* % of full speed (0-100) */ -+ uint8_t fan7_nonstop; /* % of full speed (0-100) */ -+ uint8_t fan8_nonstop; /* % of full speed (0-100) */ -+ -+ uint8_t default_speed; /* % of full speed (0-100) */ -+ -+ uint8_t fan1_duty; /* % of full speed (0-100) */ -+ uint8_t fan2_duty; /* % of full speed (0-100) */ -+ uint8_t fan3_duty; /* % of full speed (0-100) */ -+ uint8_t fan4_duty; /* % of full speed (0-100) */ -+ uint8_t fan5_duty; /* % of full speed (0-100) */ -+ uint8_t fan6_duty; /* % of full speed (0-100) */ -+ uint8_t fan7_duty; /* % of full speed (0-100) */ -+ uint8_t fan8_duty; /* % of full speed (0-100) */ -+}; -diff --git a/src/drivers/i2c/w83795/w83795.c b/src/drivers/i2c/w83795/w83795.c -index 2bbe0be..0af272f 100644 ---- a/src/drivers/i2c/w83795/w83795.c -+++ b/src/drivers/i2c/w83795/w83795.c -@@ -2,6 +2,7 @@ - * This file is part of the coreboot project. - * - * Copyright (C) 2012 Advanced Micro Devices, Inc. -+ * Copyright (C) 2015 Raptor Engineering - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by -@@ -21,106 +22,68 @@ - #include <arch/cpu.h> - #include <console/console.h> - #include <device/device.h> --#include "southbridge/amd/cimx/sb700/smbus.h" /*SMBUS_IO_BASE*/ - #include "w83795.h" -+#include <device/smbus.h> -+#include "chip.h" - --static int w83795_set_bank(u8 bank) -+static int w83795_set_bank(struct device *dev, uint8_t bank) - { -- return do_smbus_write_byte(SMBUS_IO_BASE, W83795_DEV, W83795_REG_BANKSEL, bank); -+ return smbus_write_byte(dev, W83795_REG_BANKSEL, bank); - } - --static u8 w83795_read(u16 reg) -+static uint8_t w83795_read(struct device *dev, uint16_t reg) - { - int ret; - -- ret = w83795_set_bank(reg >> 8); -+ ret = w83795_set_bank(dev, reg >> 8); - if (ret < 0) { -- printk(BIOS_DEBUG, "read faild to set bank %x\n", reg >> 8); -+ printk(BIOS_DEBUG, "read failed to set bank %x\n", reg >> 8); - return -1; - } - -- ret = do_smbus_read_byte(SMBUS_IO_BASE, W83795_DEV, reg & 0xff); -+ ret = smbus_read_byte(dev, reg & 0xff); - return ret; - } - --static u8 w83795_write(u16 reg, u8 value) -+static uint8_t w83795_write(struct device *dev, uint16_t reg, uint8_t value) - { - int err; - -- err = w83795_set_bank(reg >> 8); -+ err = w83795_set_bank(dev, reg >> 8); - if (err < 0) { -- printk(BIOS_DEBUG, "write faild to set bank %x\n", reg >> 8); -+ printk(BIOS_DEBUG, "write failed to set bank %x\n", reg >> 8); - return -1; - } - -- err = do_smbus_write_byte(SMBUS_IO_BASE, W83795_DEV, reg & 0xff, value); -+ err = smbus_write_byte(dev, reg & 0xff, value); - return err; - } - - /* -- * Enable Digital Temperature Sensor -+ * Configure Digital Temperature Sensor - */ --static void w83795_dts_enable(u8 dts_src) -+static void w83795_dts_configure(struct device *dev, uint8_t dts_src) - { - u8 val; - - /* DIS */ -- val = w83795_read(W83795_REG_DTSC); -+ val = w83795_read(dev, W83795_REG_DTSC); - val |= (dts_src & 0x01); -- w83795_write(W83795_REG_DTSC, val); -- -- /* DTSE */ -- val = w83795_read(W83795_REG_DTSE); -- val |= 0xFF; -- w83795_write(W83795_REG_DTSE, val); -- -- /* store bank3 regs first before enable DTS */ -- -- /* -- * TD/TR1-4 thermal diode by default -- * 0x00 Disable -- * 0x01 thermistors on motherboard -- * 0x10 different mode voltage -- * 0x11 CPU internal thermal diode output -- * -- * TR5-6 thermistors by default TRn -- */ -- val = 0x55; /* thermal diode */ -- w83795_write(W83795_REG_TEMP_CTRL2, val); -- -- /* Enable Digital Temperature Sensor */ -- val = w83795_read(W83795_REG_TEMP_CTRL1); -- val |= W83795_REG_TEMP_CTRL1_EN_DTS; /* EN_DTS */ -- w83795_write(W83795_REG_TEMP_CTRL1, val); -+ w83795_write(dev, W83795_REG_DTSC, val); - } - --static void w83795_set_tfmr(w83795_fan_mode_t mode) --{ -- u8 val; -- u8 i; -- -- if ((mode == SMART_FAN_MODE) || (mode == THERMAL_CRUISE_MODE)) { -- val = 0xFF; -- } else { -- val = 0x00; -- } -- -- for (i = 0; i < 6; i++) -- w83795_write(W83795_REG_TFMR(i), val); --} -- --static u32 w83795_set_fan_mode(w83795_fan_mode_t mode) -+static u32 w83795_set_fan_mode(struct device *dev, w83795_fan_mode_t mode) - { - if (mode == SPEED_CRUISE_MODE) { -- w83795_write(W83795_REG_FCMS1, 0xFF); -+ w83795_write(dev, W83795_REG_FCMS1, 0xFF); - printk(BIOS_INFO, "W83795G/ADG work in Speed Cruise Mode\n"); - } else { -- w83795_write(W83795_REG_FCMS1, 0x00); -+ w83795_write(dev, W83795_REG_FCMS1, 0x00); - if (mode == THERMAL_CRUISE_MODE) { -- w83795_write(W83795_REG_FCMS2, 0x00); -+ w83795_write(dev, W83795_REG_FCMS2, 0x00); - printk(BIOS_INFO, "W83795G/ADG work in Thermal Cruise Mode\n"); - } else if (mode == SMART_FAN_MODE) { -- w83795_write(W83795_REG_FCMS2, 0x3F); -+ w83795_write(dev, W83795_REG_FCMS2, 0x3F); - printk(BIOS_INFO, "W83795G/ADG work in Smart Fan Mode\n"); - } else { - printk(BIOS_INFO, "W83795G/ADG work in Manual Mode\n"); -@@ -131,40 +94,12 @@ static u32 w83795_set_fan_mode(w83795_fan_mode_t mode) - return 0; - } - --static void w83795_set_tss(void) -+static void w83795_set_fan(struct device *dev, w83795_fan_mode_t mode) - { -- u8 val; -- -- val = 0x00; -- w83795_write(W83795_REG_TSS(0), val); /* Temp1, 2 */ -- w83795_write(W83795_REG_TSS(1), val); /* Temp3, 4 */ -- w83795_write(W83795_REG_TSS(2), val); /* Temp5, 6 */ --} -- --static void w83795_set_fan(w83795_fan_mode_t mode) --{ -- u8 i; -- -- /* select temperature sensor (TSS)*/ -- w83795_set_tss(); -- -- /* select Temperature to Fan mapping Relationships (TFMR)*/ -- w83795_set_tfmr(mode); -- - /* set fan output controlled mode (FCMS)*/ -- w83795_set_fan_mode(mode); -+ w83795_set_fan_mode(dev, mode); - -- /* Set Critical Temperature to Full Speed all fan (CTFS) */ -- for (i = 0; i < 6; i++) { -- w83795_write(W83795_REG_CTFS(i), 0x50); /* default 80 celsius degree */ -- } -- -- if (mode == THERMAL_CRUISE_MODE) { -- /* Set Target Temperature of Temperature Inputs (TTTI) */ -- for (i = 0; i < 6; i++) { -- w83795_write(W83795_REG_TTTI(i), 0x28); /* default 40 celsius degree */ -- } -- } else if (mode == SMART_FAN_MODE) { -+ if (mode == SMART_FAN_MODE) { - /* Set the Relative Register-at SMART FAN IV Control Mode Table */ - //SFIV TODO - } -@@ -173,16 +108,44 @@ static void w83795_set_fan(w83795_fan_mode_t mode) - //TODO - } - --static void w83795_init(w83795_fan_mode_t mode, u8 dts_src) -+static uint8_t fan_pct_to_cfg_val(uint8_t percent) - { -- u8 i; -- u8 val; -+ uint16_t cfg = (((unsigned int)percent * 10000) / 3922); -+ if (cfg > 0xff) -+ cfg = 0xff; -+ return cfg; -+} -+ -+static uint8_t millivolts_to_limit_value_type1(int millivolts) -+{ -+ /* Datasheet v1.41 page 44 (VSEN1 - VSEN13, VTT) */ -+ return ((millivolts / 2) >> 2); -+} -+ -+static uint8_t millivolts_to_limit_value_type2(int millivolts) -+{ -+ /* Datasheet v1.41 page 44 (3VSB, 3VDD, VBAT) */ -+ return ((millivolts / 6) >> 2); -+} -+ -+static uint16_t millivolts_to_limit_value_type3(int millivolts) -+{ -+ /* Datasheet v1.41 page 44 (VDSEN14 - VDSEN17) */ -+ return (millivolts / 2); -+} -+ -+static void w83795_init(struct device *dev, w83795_fan_mode_t mode, u8 dts_src) -+{ -+ struct drivers_i2c_w83795_config *config = dev->chip_info; -+ uint8_t i; -+ uint8_t val; -+ uint16_t limit_value; - -- if (do_smbus_read_byte(SMBUS_IO_BASE, W83795_DEV, 0x00) < 0) { -+ if (smbus_read_byte(dev, 0x00) < 0) { - printk(BIOS_ERR, "W83795G/ADG Nuvoton H/W Monitor not found\n"); - return; - } -- val = w83795_read(W83795_REG_CONFIG); -+ val = w83795_read(dev, W83795_REG_CONFIG); - if ((val & W83795_REG_CONFIG_CONFIG48) == 0) - printk(BIOS_INFO, "Found 64 pin W83795G Nuvoton H/W Monitor\n"); - else if ((val & W83795_REG_CONFIG_CONFIG48) == 1) -@@ -190,35 +153,185 @@ static void w83795_init(w83795_fan_mode_t mode, u8 dts_src) - - /* Reset */ - val |= W83795_REG_CONFIG_INIT; -- w83795_write(W83795_REG_CONFIG, val); -- -- /* Fan monitoring setting */ -- val = 0xFF; /* FAN1-FAN8 */ -- w83795_write(W83795_REG_FANIN_CTRL1, val); -- val = 0x3F; /* FAN9-FAN14 */ -- w83795_write(W83795_REG_FANIN_CTRL2, val); -+ w83795_write(dev, W83795_REG_CONFIG, val); -+ -+ /* Fan monitor settings */ -+ w83795_write(dev, W83795_REG_FANIN_CTRL1, config->fanin_ctl1); -+ w83795_write(dev, W83795_REG_FANIN_CTRL2, config->fanin_ctl2); -+ -+ /* Temperature thresholds */ -+ w83795_write(dev, W83795_REG_TEMP_CRIT(0), config->tr1_critical_temperature); -+ w83795_write(dev, W83795_REG_TEMP_CRIT_HYSTER(0), config->tr1_critical_hysteresis); -+ w83795_write(dev, W83795_REG_TEMP_WARN(0), config->tr1_warning_temperature); -+ w83795_write(dev, W83795_REG_TEMP_WARN_HYSTER(0), config->tr1_warning_hysteresis); -+ w83795_write(dev, W83795_REG_TEMP_CRIT(1), config->tr2_critical_temperature); -+ w83795_write(dev, W83795_REG_TEMP_CRIT_HYSTER(1), config->tr2_critical_hysteresis); -+ w83795_write(dev, W83795_REG_TEMP_WARN(1), config->tr2_warning_temperature); -+ w83795_write(dev, W83795_REG_TEMP_WARN_HYSTER(1), config->tr2_warning_hysteresis); -+ w83795_write(dev, W83795_REG_TEMP_CRIT(2), config->tr3_critical_temperature); -+ w83795_write(dev, W83795_REG_TEMP_CRIT_HYSTER(2), config->tr3_critical_hysteresis); -+ w83795_write(dev, W83795_REG_TEMP_WARN(2), config->tr3_warning_temperature); -+ w83795_write(dev, W83795_REG_TEMP_WARN_HYSTER(2), config->tr3_warning_hysteresis); -+ w83795_write(dev, W83795_REG_TEMP_CRIT(3), config->tr4_critical_temperature); -+ w83795_write(dev, W83795_REG_TEMP_CRIT_HYSTER(3), config->tr4_critical_hysteresis); -+ w83795_write(dev, W83795_REG_TEMP_WARN(3), config->tr4_warning_temperature); -+ w83795_write(dev, W83795_REG_TEMP_WARN_HYSTER(3), config->tr4_warning_hysteresis); -+ w83795_write(dev, W83795_REG_TEMP_CRIT(4), config->tr5_critical_temperature); -+ w83795_write(dev, W83795_REG_TEMP_CRIT_HYSTER(4), config->tr5_critical_hysteresis); -+ w83795_write(dev, W83795_REG_TEMP_WARN(4), config->tr5_warning_temperature); -+ w83795_write(dev, W83795_REG_TEMP_WARN_HYSTER(4), config->tr5_warning_hysteresis); -+ w83795_write(dev, W83795_REG_TEMP_CRIT(5), config->tr6_critical_temperature); -+ w83795_write(dev, W83795_REG_TEMP_CRIT_HYSTER(5), config->tr6_critical_hysteresis); -+ w83795_write(dev, W83795_REG_TEMP_WARN(5), config->tr6_warning_temperature); -+ w83795_write(dev, W83795_REG_TEMP_WARN_HYSTER(5), config->tr6_warning_hysteresis); -+ -+ /* DTS enable */ -+ w83795_write(dev, W83795_REG_DTSE, config->temp_dtse); -+ -+ /* DTS temperature thresholds */ -+ w83795_write(dev, W83795_REG_DTS_CRIT, config->dts_critical_temperature); -+ w83795_write(dev, W83795_REG_DTS_CRIT_HYSTER, config->dts_critical_hysteresis); -+ w83795_write(dev, W83795_REG_DTS_WARN, config->dts_warning_temperature); -+ w83795_write(dev, W83795_REG_DTS_WARN_HYSTER, config->dts_warning_hysteresis); -+ -+ /* Configure DTS registers in bank3 before enabling DTS */ -+ w83795_dts_configure(dev, dts_src); -+ -+ /* Temperature monitor settings */ -+ w83795_write(dev, W83795_REG_TEMP_CTRL1, config->temp_ctl1); -+ w83795_write(dev, W83795_REG_TEMP_CTRL2, config->temp_ctl2); -+ -+ /* Temperature to fan mappings */ -+ w83795_write(dev, W83795_REG_TFMR(0), config->temp1_fan_select); -+ w83795_write(dev, W83795_REG_TFMR(1), config->temp2_fan_select); -+ w83795_write(dev, W83795_REG_TFMR(2), config->temp3_fan_select); -+ w83795_write(dev, W83795_REG_TFMR(3), config->temp4_fan_select); -+ w83795_write(dev, W83795_REG_TFMR(4), config->temp5_fan_select); -+ w83795_write(dev, W83795_REG_TFMR(5), config->temp6_fan_select); -+ -+ /* Temperature data source to temperature mappings */ -+ w83795_write(dev, W83795_REG_T12TSS, ((config->temp2_source_select & 0xff) << 8) | (config->temp1_source_select & 0xff)); -+ w83795_write(dev, W83795_REG_T34TSS, ((config->temp4_source_select & 0xff) << 8) | (config->temp3_source_select & 0xff)); -+ w83795_write(dev, W83795_REG_T56TSS, ((config->temp6_source_select & 0xff) << 8) | (config->temp5_source_select & 0xff)); -+ -+ /* Set critical temperatures -+ * If any sensor exceeds the associated critical temperature, -+ * all fans will be forced to full speed. -+ */ -+ w83795_write(dev, W83795_REG_CTFS(0), config->temp1_critical_temperature); -+ w83795_write(dev, W83795_REG_CTFS(1), config->temp2_critical_temperature); -+ w83795_write(dev, W83795_REG_CTFS(2), config->temp3_critical_temperature); -+ w83795_write(dev, W83795_REG_CTFS(3), config->temp4_critical_temperature); -+ w83795_write(dev, W83795_REG_CTFS(4), config->temp5_critical_temperature); -+ w83795_write(dev, W83795_REG_CTFS(5), config->temp6_critical_temperature); -+ -+ /* Set fan control target temperatures */ -+ w83795_write(dev, W83795_REG_TTTI(0), config->temp1_target_temperature); -+ w83795_write(dev, W83795_REG_TTTI(1), config->temp2_target_temperature); -+ w83795_write(dev, W83795_REG_TTTI(2), config->temp3_target_temperature); -+ w83795_write(dev, W83795_REG_TTTI(3), config->temp4_target_temperature); -+ w83795_write(dev, W83795_REG_TTTI(4), config->temp5_target_temperature); -+ w83795_write(dev, W83795_REG_TTTI(5), config->temp6_target_temperature); -+ -+ /* Set fan stall prevention parameters */ -+ w83795_write(dev, W83795_REG_FAN_NONSTOP(0), config->fan1_nonstop); -+ w83795_write(dev, W83795_REG_FAN_NONSTOP(1), config->fan2_nonstop); -+ w83795_write(dev, W83795_REG_FAN_NONSTOP(2), config->fan3_nonstop); -+ w83795_write(dev, W83795_REG_FAN_NONSTOP(3), config->fan4_nonstop); -+ w83795_write(dev, W83795_REG_FAN_NONSTOP(4), config->fan5_nonstop); -+ w83795_write(dev, W83795_REG_FAN_NONSTOP(5), config->fan6_nonstop); -+ w83795_write(dev, W83795_REG_FAN_NONSTOP(6), config->fan7_nonstop); -+ w83795_write(dev, W83795_REG_FAN_NONSTOP(7), config->fan8_nonstop); -+ -+ /* Set fan default speed */ -+ w83795_write(dev, W83795_REG_DFSP, fan_pct_to_cfg_val(config->default_speed)); -+ -+ /* Set initial fan speeds */ -+ w83795_write(dev, W83795_REG_FAN_MANUAL_SPEED(0), fan_pct_to_cfg_val(config->fan1_duty)); -+ w83795_write(dev, W83795_REG_FAN_MANUAL_SPEED(1), fan_pct_to_cfg_val(config->fan2_duty)); -+ w83795_write(dev, W83795_REG_FAN_MANUAL_SPEED(2), fan_pct_to_cfg_val(config->fan3_duty)); -+ w83795_write(dev, W83795_REG_FAN_MANUAL_SPEED(3), fan_pct_to_cfg_val(config->fan4_duty)); -+ w83795_write(dev, W83795_REG_FAN_MANUAL_SPEED(4), fan_pct_to_cfg_val(config->fan5_duty)); -+ w83795_write(dev, W83795_REG_FAN_MANUAL_SPEED(5), fan_pct_to_cfg_val(config->fan6_duty)); -+ w83795_write(dev, W83795_REG_FAN_MANUAL_SPEED(6), fan_pct_to_cfg_val(config->fan7_duty)); -+ w83795_write(dev, W83795_REG_FAN_MANUAL_SPEED(7), fan_pct_to_cfg_val(config->fan8_duty)); -+ -+ /* Voltage monitor settings */ -+ w83795_write(dev, W83795_REG_VOLT_CTRL1, config->volt_ctl1); -+ w83795_write(dev, W83795_REG_VOLT_CTRL2, config->volt_ctl2); -+ -+ /* Voltage high/low limits */ -+ w83795_write(dev, W83795_REG_VOLT_LIM_HIGH(0), millivolts_to_limit_value_type1(config->vcore1_high_limit_mv)); -+ w83795_write(dev, W83795_REG_VOLT_LIM_LOW(0), millivolts_to_limit_value_type1(config->vcore1_low_limit_mv)); -+ w83795_write(dev, W83795_REG_VOLT_LIM_HIGH(1), millivolts_to_limit_value_type1(config->vcore2_high_limit_mv)); -+ w83795_write(dev, W83795_REG_VOLT_LIM_LOW(1), millivolts_to_limit_value_type1(config->vcore2_low_limit_mv)); -+ w83795_write(dev, W83795_REG_VOLT_LIM_HIGH(2), millivolts_to_limit_value_type1(config->vsen3_high_limit_mv)); -+ w83795_write(dev, W83795_REG_VOLT_LIM_LOW(2), millivolts_to_limit_value_type1(config->vsen3_low_limit_mv)); -+ w83795_write(dev, W83795_REG_VOLT_LIM_HIGH(3), millivolts_to_limit_value_type1(config->vsen4_high_limit_mv)); -+ w83795_write(dev, W83795_REG_VOLT_LIM_LOW(3), millivolts_to_limit_value_type1(config->vsen4_low_limit_mv)); -+ w83795_write(dev, W83795_REG_VOLT_LIM_HIGH(4), millivolts_to_limit_value_type1(config->vsen5_high_limit_mv)); -+ w83795_write(dev, W83795_REG_VOLT_LIM_LOW(4), millivolts_to_limit_value_type1(config->vsen5_low_limit_mv)); -+ w83795_write(dev, W83795_REG_VOLT_LIM_HIGH(5), millivolts_to_limit_value_type1(config->vsen6_high_limit_mv)); -+ w83795_write(dev, W83795_REG_VOLT_LIM_LOW(5), millivolts_to_limit_value_type1(config->vsen6_low_limit_mv)); -+ w83795_write(dev, W83795_REG_VOLT_LIM_HIGH(6), millivolts_to_limit_value_type1(config->vsen7_high_limit_mv)); -+ w83795_write(dev, W83795_REG_VOLT_LIM_LOW(6), millivolts_to_limit_value_type1(config->vsen7_low_limit_mv)); -+ w83795_write(dev, W83795_REG_VOLT_LIM_HIGH(7), millivolts_to_limit_value_type1(config->vsen8_high_limit_mv)); -+ w83795_write(dev, W83795_REG_VOLT_LIM_LOW(7), millivolts_to_limit_value_type1(config->vsen8_low_limit_mv)); -+ w83795_write(dev, W83795_REG_VOLT_LIM_HIGH(8), millivolts_to_limit_value_type1(config->vsen9_high_limit_mv)); -+ w83795_write(dev, W83795_REG_VOLT_LIM_LOW(8), millivolts_to_limit_value_type1(config->vsen9_low_limit_mv)); -+ w83795_write(dev, W83795_REG_VOLT_LIM_HIGH(9), millivolts_to_limit_value_type1(config->vsen10_high_limit_mv)); -+ w83795_write(dev, W83795_REG_VOLT_LIM_LOW(9), millivolts_to_limit_value_type1(config->vsen10_low_limit_mv)); -+ w83795_write(dev, W83795_REG_VOLT_LIM_HIGH(10), millivolts_to_limit_value_type1(config->vsen11_high_limit_mv)); -+ w83795_write(dev, W83795_REG_VOLT_LIM_LOW(10), millivolts_to_limit_value_type1(config->vsen11_low_limit_mv)); -+ w83795_write(dev, W83795_REG_VOLT_LIM_HIGH(11), millivolts_to_limit_value_type1(config->vtt_high_limit_mv)); -+ w83795_write(dev, W83795_REG_VOLT_LIM_LOW(11), millivolts_to_limit_value_type1(config->vtt_low_limit_mv)); -+ w83795_write(dev, W83795_REG_VOLT_LIM_HIGH(12), millivolts_to_limit_value_type2(config->vdd_high_limit_mv)); -+ w83795_write(dev, W83795_REG_VOLT_LIM_LOW(12), millivolts_to_limit_value_type2(config->vdd_low_limit_mv)); -+ w83795_write(dev, W83795_REG_VOLT_LIM_HIGH(13), millivolts_to_limit_value_type2(config->vsb_high_limit_mv)); -+ w83795_write(dev, W83795_REG_VOLT_LIM_LOW(13), millivolts_to_limit_value_type2(config->vsb_low_limit_mv)); -+ w83795_write(dev, W83795_REG_VOLT_LIM_HIGH(14), millivolts_to_limit_value_type2(config->vbat_high_limit_mv)); -+ w83795_write(dev, W83795_REG_VOLT_LIM_LOW(14), millivolts_to_limit_value_type2(config->vbat_low_limit_mv)); -+ -+ /* VSEN12 limits */ -+ if (config->temp_ctl1 & 0x2) { -+ limit_value = millivolts_to_limit_value_type3(config->vsen12_high_limit_mv); -+ w83795_write(dev, W83795_REG_VOLT_LIM_HIGH_2_M(4), limit_value >> 2); -+ w83795_write(dev, W83795_REG_VOLT_LIM_HIGH_2_L(4), limit_value & 0x3); -+ limit_value = millivolts_to_limit_value_type3(config->vsen12_low_limit_mv); -+ w83795_write(dev, W83795_REG_VOLT_LIM_LOW_2_M(4), limit_value >> 2); -+ w83795_write(dev, W83795_REG_VOLT_LIM_LOW_2_L(4), limit_value & 0x3); -+ } - -- /* enable monitoring operations */ -- val = w83795_read(W83795_REG_CONFIG); -- val |= W83795_REG_CONFIG_START; -- w83795_write(W83795_REG_CONFIG, val); -+ /* VSEN13 limits */ -+ if (config->temp_ctl1 & 0x8) { -+ limit_value = millivolts_to_limit_value_type3(config->vsen13_high_limit_mv); -+ w83795_write(dev, W83795_REG_VOLT_LIM_HIGH_2_M(5), limit_value >> 2); -+ w83795_write(dev, W83795_REG_VOLT_LIM_HIGH_2_L(5), limit_value & 0x3); -+ limit_value = millivolts_to_limit_value_type3(config->vsen13_low_limit_mv); -+ w83795_write(dev, W83795_REG_VOLT_LIM_LOW_2_M(5), limit_value >> 2); -+ w83795_write(dev, W83795_REG_VOLT_LIM_LOW_2_L(5), limit_value & 0x3); -+ } - -- w83795_dts_enable(dts_src); -- w83795_set_fan(mode); -+ w83795_set_fan(dev, mode); - - printk(BIOS_INFO, "Fan CTFS(celsius) TTTI(celsius)\n"); - for (i = 0; i < 6; i++) { -- val = w83795_read(W83795_REG_CTFS(i)); -+ val = w83795_read(dev, W83795_REG_CTFS(i)); - printk(BIOS_INFO, " %x %d", i, val); -- val = w83795_read(W83795_REG_TTTI(i)); -+ val = w83795_read(dev, W83795_REG_TTTI(i)); - printk(BIOS_INFO, " %d\n", val); - } - - /* Temperature ReadOut */ - for (i = 0; i < 9; i++) { -- val = w83795_read(W83795_REG_DTS(i)); -+ val = w83795_read(dev, W83795_REG_DTS(i)); - printk(BIOS_DEBUG, "DTS%x ReadOut=%x\n", i, val); - } -+ -+ /* start monitoring operation */ -+ val = w83795_read(dev, W83795_REG_CONFIG); -+ val |= W83795_REG_CONFIG_START; -+ w83795_write(dev, W83795_REG_CONFIG, val); - } - - static void w83795_hwm_init(struct device *dev) -@@ -232,9 +345,9 @@ static void w83795_hwm_init(struct device *dev) - die("CPU: missing cpu device structure"); - - if (cpu->vendor == X86_VENDOR_AMD) -- w83795_init(THERMAL_CRUISE_MODE, DTS_SRC_AMD_SBTSI); -+ w83795_init(dev, THERMAL_CRUISE_MODE, DTS_SRC_AMD_SBTSI); - else if (cpu->vendor == X86_VENDOR_INTEL) -- w83795_init(THERMAL_CRUISE_MODE, DTS_SRC_INTEL_PECI); -+ w83795_init(dev, THERMAL_CRUISE_MODE, DTS_SRC_INTEL_PECI); - else - printk(BIOS_ERR, "Neither AMD nor INTEL CPU detected\n"); - } -diff --git a/src/drivers/i2c/w83795/w83795.h b/src/drivers/i2c/w83795/w83795.h -index cac4d5f..ef603f5 100644 ---- a/src/drivers/i2c/w83795/w83795.h -+++ b/src/drivers/i2c/w83795/w83795.h -@@ -2,6 +2,7 @@ - * This file is part of the coreboot project. - * - * Copyright (C) 2012 Advanced Micro Devices, Inc. -+ * Copyright (C) 2015 Raptor Engineering - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by -@@ -20,8 +21,6 @@ - #ifndef _W83795_H_ - #define _W83795_H_ - --#define W83795_DEV 0x2F /* Host I2c Addr (strap to addr1 addr0 1 1, 0x5E) */ -- - #define W83795_REG_I2C_ADDR 0xFC - #define W83795_REG_BANKSEL 0x00 - #define W83795_REG_CONFIG 0x01 -@@ -29,6 +28,8 @@ - #define W83795_REG_CONFIG_CONFIG48 0x04 - #define W83795_REG_CONFIG_INIT 0x80 - -+#define W83795_REG_VOLT_CTRL1 0x02 -+#define W83795_REG_VOLT_CTRL2 0x03 - #define W83795_REG_TEMP_CTRL1 0x04 /* Temperature Monitoring Control Register */ - #define W83795_REG_TEMP_CTRL2 0x05 /* Temperature Monitoring Control Register */ - #define W83795_REG_FANIN_CTRL1 0x06 -@@ -37,37 +38,58 @@ - #define DTS_SRC_INTEL_PECI (0 << 0) - #define DTS_SRC_AMD_SBTSI (1 << 0) - --#define W83795_REG_TSS(n) (0x209 + (n)) /* Temperature Source Selection Register */ - #define W83795_REG_TTTI(n) (0x260 + (n)) /* Target temperature W83795G/ADG will try to tune the fan output to keep */ - #define W83795_REG_CTFS(n) (0x268 + (n)) /* Critical Temperature to Full Speed all fan */ --#define W83795_REG_HT(n) (0x270 + (n)) /* Hysteresis of Temperature */ - #define W83795_REG_DTSC 0x301 /* Digital Temperature Sensor Configuration */ - - #define W83795_REG_DTSE 0x302 /* Digital Temperature Sensor Enable */ - #define W83795_REG_DTS(n) (0x26 + (n)) - #define W83795_REG_VRLSB 0x3C - --#define W83795_TEMP_REG_TR1 0x21 --#define W83795_TEMP_REG_TR2 0x22 --#define W83795_TEMP_REG_TR3 0x23 --#define W83795_TEMP_REG_TR4 0x24 --#define W83795_TEMP_REG_TR5 0x1F --#define W83795_TEMP_REG_TR6 0x20 -+#define W83795_REG_TEMP_TR1 0x21 -+#define W83795_REG_TEMP_TR2 0x22 -+#define W83795_REG_TEMP_TR3 0x23 -+#define W83795_REG_TEMP_TR4 0x24 -+#define W83795_REG_TEMP_TR5 0x1F -+#define W83795_REG_TEMP_TR6 0x20 -+ -+#define W83795_REG_VOLT_LIM_HIGH(n) (0x70 + (n * 2)) /* Voltage high limit (0 == VSEN1) */ -+#define W83795_REG_VOLT_LIM_LOW(n) (0x71 + (n * 2)) /* Voltage low limit (0 == VSEN1) */ -+#define W83795_REG_VOLT_LIM_HIGH_2_M(n) (0x96 + (n * 4)) /* Voltage high limit MSB (0 == VDSEN14) */ -+#define W83795_REG_VOLT_LIM_LOW_2_M(n) (0x97 + (n * 4)) /* Voltage low limit MSB (0 == VDSEN14) */ -+#define W83795_REG_VOLT_LIM_HIGH_2_L(n) (0x98 + (n * 4)) /* Voltage high limit LSB (0 == VDSEN14) */ -+#define W83795_REG_VOLT_LIM_LOW_2_L(n) (0x99 + (n * 4)) /* Voltage low limit LSB (0 == VDSEN14) */ -+ -+#define W83795_REG_TEMP_CRIT(n) (0x96 + (n * 4)) /* Temperature critical limit */ -+#define W83795_REG_TEMP_CRIT_HYSTER(n) (0x97 + (n * 4)) /* Temperature critical limit hysteresis */ -+#define W83795_REG_TEMP_WARN(n) (0x98 + (n * 4)) /* Temperature warning limit */ -+#define W83795_REG_TEMP_WARN_HYSTER(n) (0x99 + (n * 4)) /* Temperature warning limit hysteresis */ -+ -+#define W83795_REG_DTS_CRIT 0xB2 /* Temperature critical limit */ -+#define W83795_REG_DTS_CRIT_HYSTER 0xB3 /* Temperature critical limit hysteresis */ -+#define W83795_REG_DTS_WARN 0xB4 /* Temperature warning limit */ -+#define W83795_REG_DTS_WARN_HYSTER 0xB5 /* Temperature warning limit hysteresis */ - - #define W83795_REG_FCMS1 0x201 - #define W83795_REG_FCMS2 0x208 --#define W83795_REG_TFMR(n) (0x202 + (n)) /*temperature to fam mappig*/ -+#define W83795_REG_TFMR(n) (0x202 + (n)) /* Temperature to fan mapping */ -+#define W83795_REG_T12TSS 0x209 /* Temperature Source Selection Register 1 */ -+#define W83795_REG_T34TSS 0x20A /* Temperature Source Selection Register 2 */ -+#define W83795_REG_T56TSS 0x20B /* Temperature Source Selection Register 3 */ -+#define W83795_REG_FAN_MANUAL_SPEED(n) (0x210 + n) - #define W83795_REG_DFSP 0x20C - -+#define W83795_REG_FAN_NONSTOP(n) (0x228 + (n)) /* Fan Nonstop Value */ -+ - #define W83795_REG_FTSH(n) (0x240 + (n) * 2) - #define W83795_REG_FTSL(n) (0x241 + (n) * 2) - #define W83795_REG_TFTS 0x250 - - typedef enum w83795_fan_mode { -- SPEED_CRUISE_MODE, ///< Fan Speed Cruise mode keeps the fan speed in a specified range -- THERMAL_CRUISE_MODE, ///< Thermal Cruise mode is an algorithm to control the fan speed to keep the temperature source around the TTTI -- SMART_FAN_MODE, ///< Smart Fan mode offers 6 slopes to control the fan speed -- MANUAL_MODE, ///< control manually -+ SPEED_CRUISE_MODE = 0, ///< Fan Speed Cruise mode keeps the fan speed in a specified range -+ THERMAL_CRUISE_MODE = 1, ///< Thermal Cruise mode is an algorithm to control the fan speed to keep the temperature source around the TTTI -+ SMART_FAN_MODE = 2, ///< Smart Fan mode offers 6 slopes to control the fan speed -+ MANUAL_MODE = 3, ///< control manually - } w83795_fan_mode_t; - - #endif --- -1.7.9.5 - |