summaryrefslogtreecommitdiffstats
path: root/docs/install/bbb_setup.html
diff options
context:
space:
mode:
Diffstat (limited to 'docs/install/bbb_setup.html')
-rw-r--r--docs/install/bbb_setup.html13
1 files changed, 13 insertions, 0 deletions
diff --git a/docs/install/bbb_setup.html b/docs/install/bbb_setup.html
index 840b4ad..69ba412 100644
--- a/docs/install/bbb_setup.html
+++ b/docs/install/bbb_setup.html
@@ -114,6 +114,19 @@
are done while SSH'd into a BBB.
</p>
<p>
+ You can also use a serial FTDI debug board, with GNU Screen (example):<br/>
+ # <b>screen /dev/ttyUSB0 115200</b><br/>
+ <a href="images/x200/ftdi.jpg">images/x200/ftdi.jpg</a> and
+ <a href="images/x200/ftdi_port.jpg">images/x200/ftdi_port.jpg</a>
+ show an FTDI debug board in use. With screen you can then login as root, like you would using SSH.<br/>
+ Using this, you can also see text output (from kernel, etc) when booting the machine.
+ </p>
+ <p>
+ You can also simply connect the USB cable from the BBB to another computer and a new network interface will appear,
+ with it's own IP address: this is the BBB. You can SSH into that. Or, you can (example):<br/>
+ # <b>screen /dev/ttyACM0 115200</b>
+ </p>
+ <p>
Since it's a bare board (no case) and you are also touching inside your X200, you should be earthed/grounded.
<a href="images/x200/strap.jpg">images/x200/strap.jpg</a> shows how I earthed myself. This is to prevent you
from causing any ESD damage. The surface that you place components on should also be earthed/grounded.