summaryrefslogtreecommitdiffstats
path: root/docs/howtos/t60_unbrick.html
diff options
context:
space:
mode:
Diffstat (limited to 'docs/howtos/t60_unbrick.html')
-rw-r--r--docs/howtos/t60_unbrick.html319
1 files changed, 0 insertions, 319 deletions
diff --git a/docs/howtos/t60_unbrick.html b/docs/howtos/t60_unbrick.html
deleted file mode 100644
index 69648e1..0000000
--- a/docs/howtos/t60_unbrick.html
+++ /dev/null
@@ -1,319 +0,0 @@
-<!DOCTYPE html>
-<html>
-<head>
- <meta charset="utf-8">
- <meta name="viewport" content="width=device-width, initial-scale=1">
-
- <style type="text/css">
- body {
- background:#fff;
- color:#000;
- font-family:sans-serif;
- font-size:1em;
- }
- </style>
-
- <title>Libreboot documentation: Unbricking the ThinkPad T60</title>
-</head>
-
-<body>
-
- <header>
- <h1>Unbricking the ThinkPad T60</h1>
- <aside>This guide will show you how to recover from a bad flash that prevents your ThinkPad T60 from booting.</aside>
- </header>
-
- <p>Or go <a href="../index.html">back to main index</a></p>
-
- <h2>Table of Contents</h2>
- <ul>
- <li><a href="#hardware_requirements">Hardware Requirements</a></li>
- <li><a href="#software_requirements">Software Requirements</a></li>
- <li>
- Types of brick:
- <ul>
- <li><a href="#bucts_brick">Brick type 1: bucts not reset</a></li>
- <li><a href="#recovery">Brick type 2: bad rom (or user error), machine won't boot</a></li>
- </ul>
- </li>
- </ul>
-
- <h1 id="hardware_requirements">Hardware requirements</h1>
- <ul>
- <li>a 2nd computer (maybe another T60. any computer will do)</li>
- <li>external flashrom-compatible programmer (I'm using the "bus pirate")
- <li>SOIC-8 IC clip (I'm using the Pomona 5250)</li>
- <li>Cable (programmer<>clip) - mine came with the bus pirate.</li>
- <li>USB mini a to b cable (for buspirate<>computer connection).</li>
- <li>rubbing a***hol (misspelling intentional. halal internet) and thermal compound for changing CPU heatsink (procedure involves removing heatsink)</li>
- </ul>
-
- <h1 id="software_requirements">Software requirements</h1>
- <ul>
- <li>GNU/Linux (on the 2nd computer)</li>
- <li>flashrom software (on the 2nd computer): <a href="http://flashrom.org/" target="_blank">http://flashrom.org/</a>
- </ul>
-
- <h1 id="bucts_brick">Brick type 1: bucts not reset.</h1>
- <p>
- You still have Lenovo BIOS, or you had libreboot running and you flashed another ROM; and you had bucts 1 set and
- the ROM wasn't dd'd.* or if Lenovo BIOS was present and libreboot wasn't flashed.<br/><br/>
-
- In this case, unbricking is easy: reset BUC.TS to 0 by removing that yellow cmos coin (it's a battery) and putting it back after a minute or two:<br/>
- <img src="t60_dev/0006.JPG" alt="" /><br/><br/>
-
- *Those dd commands should be applied to all newly compiled T60 ROM's (the ROM's in libreboot binary archives already have this applied!):<br/>
- dd if=coreboot.rom of=top64k.bin bs=1 skip=$[$(stat -c %s coreboot.rom) - 0x10000] count=64k<br/>
- dd if=coreboot.rom bs=1 skip=$[$(stat -c %s coreboot.rom) - 0x20000] count=64k | hexdump<br/>
- dd if=top64k.bin of=coreboot.rom bs=1 seek=$[$(stat -c %s coreboot.rom) - 0x20000] count=64k conv=notrunc<br/>
- (doing this makes the ROM suitable for use when flashing a machine that still has Lenovo BIOS running,
- using those instructions: <a href="http://www.coreboot.org/Board:lenovo/x60/Installation" target="_blank">http://www.coreboot.org/Board:lenovo/x60/Installation</a>.
- (it says x60, but instructions for t60 are identical)
- </p>
-
- <h1 id="recovery">bad rom (or user error), machine won't boot</h1>
-
- <p>
- In this scenario, you compiled a ROM that had an incorrect configuration, or there is an actual bug preventing your machine from
- booting. Or, maybe, you set BUC.TS to 0 and shut down after first flash while Lenovo BIOS was running. In any case, your machine is bricked and will not boot at all.
- </p>
- <p>
- &quot;Unbricking&quot; means flashing a known-good (working) ROM. The problem: you can't boot the machine, making this difficult. In this situation, external hardware (see hardware requirements above) is needed which can flash the SPI chip (where libreboot resides).
- </p>
-
- <p>
- Remove those screws and remove the HDD:<br/>
- <img src="t60_dev/0001.JPG" alt="" /> <img src="t60_dev/0002.JPG" alt="" />
- </p>
-
- <p>
- Lift off the palm rest:<br/>
- <img src="t60_dev/0003.JPG" alt="" />
- </p>
-
- <p>
- Lift up the keyboard, pull it back a bit, flip it over like that and then disconnect it from the board:<br/>
- <img src="t60_dev/0004.JPG" alt="" /> <img src="t60_dev/0005.JPG" alt="" /> <img src="t60_dev/0006.JPG" alt="" />
- </p>
-
- <p>
- Gently wedge both sides loose:<br/>
- <img src="t60_dev/0007.JPG" alt="" /> <img src="t60_dev/0008.JPG" alt="" />
- </p>
-
- <p>
- Remove that cable from the position:<br/>
- <img src="t60_dev/0009.JPG" alt="" /> <img src="t60_dev/0010.JPG" alt="" />
- </p>
-
- <p>
- Now remove that bezel. Remove wifi, nvram battery and speaker connector (also remove 56k modem, on the left of wifi):<br/>
- <img src="t60_dev/0011.JPG" alt="" />
- </p>
-
- <p>
- Remove those screws:<br/>
- <img src="t60_dev/0012.JPG" alt="" />
- </p>
-
- <p>
- Disconnect the power jack:<br/>
- <img src="t60_dev/0013.JPG" alt="" />
- </p>
-
- <p>
- Remove nvram battery:<br/>
- <img src="t60_dev/0014.JPG" alt="" />
- </p>
-
- <p>
- Disconnect cable (for 56k modem) and disconnect the other cable:<br/>
- <img src="t60_dev/0015.JPG" alt="" /> <img src="t60_dev/0016.JPG" alt="" />
- </p>
-
- <p>
- Disconnect speaker cable:<br/>
- <img src="t60_dev/0017.JPG" alt="" />
- </p>
-
- <p>
- Disconnect the other end of the 56k modem cable:<br/>
- <img src="t60_dev/0018.JPG" alt="" />
- </p>
-
- <p>
- Make sure you removed it:<br/>
- <img src="t60_dev/0019.JPG" alt="" />
- </p>
-
- <p>
- Unscrew those:<br/>
- <img src="t60_dev/0020.JPG" alt="" />
- </p>
-
- <p>
- Make sure you removed those:<br/>
- <img src="t60_dev/0021.JPG" alt="" />
- </p>
-
- <p>
- Disconnect LCD cable from board:<br/>
- <img src="t60_dev/0022.JPG" alt="" />
- </p>
-
- <p>
- Remove those screws then remove the LCD assembly:<br/>
- <img src="t60_dev/0023.JPG" alt="" /> <img src="t60_dev/0024.JPG" alt="" /> <img src="t60_dev/0025.JPG" alt="" />
- </p>
-
- <p>
- Once again, make sure you removed those:<br/>
- <img src="t60_dev/0026.JPG" alt="" />
- </p>
-
- <p>
- Remove the shielding containing the motherboard, then flip it over. Remove these screws, placing them on a steady
- surface in the same layout as they were in before you removed them. Also, you should mark each screw hole after removing the
- screw (a permanent marker pen will do), this is so that you have a point of reference when re-assembling the machine:<br/>
- <img src="t60_dev/0027.JPG" alt="" /> <img src="t60_dev/0028.JPG" alt="" /> <img src="t60_dev/0029.JPG" alt="" />
- <img src="t60_dev/0031.JPG" alt="" /> <img src="t60_dev/0032.JPG" alt="" /> <img src="t60_dev/0033.JPG" alt="" />
- </p>
-
- <p>
- At this point, you should wire up your programmer according to it's documentation. For me, this was (see: "SparkFun cable pin reference"):<br/>
- <a href="http://dangerousprototypes.com/docs/Common_Bus_Pirate_cable_pinouts" target="_blank">http://dangerousprototypes.com/docs/Common_Bus_Pirate_cable_pinouts</a>.<br/>
- Correlating with the following information, I was able to wire up my pirate correctly:<br/>
- <a href="http://flashrom.org/Bus_Pirate#Connections" target="_blank">http://flashrom.org/Bus_Pirate#Connections</a><br/>
- And by following that advice:<br/>
- <a href="http://www.coreboot.org/Board:lenovo/x60/Installation#Howto" target="_blank">http://www.coreboot.org/Board:lenovo/x60/Installation#Howto</a>.<br/>
- (it says X60 but instructions are virtually the same for the T60, with except to physical differences in how to disassemble the machine)<br/>
- Note: that last page says to wire up only those 5 pins (see below) like that: 1, 2, 4, 5, 6.<br/>
- Note: and then, for power it says (on that coreboot.org page) to connect the power jack to the board and connect the
- AC adapter (without powering on the board).<br/>
- Note: I ignored that advice, and wired up all 8 pins. And it worked.<br/>
-
- Here is the pinout (correlate it with your programmer's documentation):<br/>
- <img src="t60_dev/0030.JPG" alt="" />
- </p>
-
- <p>
- Connecting the pomona:<br/>
- <img src="t60_dev/0034.JPG" alt="" />
- </p>
-
- <p>
- Connect programmer to 2nd computer:<br/>
- <img src="t60_dev/0035.JPG" alt="" />
- </p>
-
- <p>
- Programmer has power:<br/>
- <img src="t60_dev/0036.JPG" alt="" />
- </p>
-
- <p>
- Now flash the bricked machine using the 2nd computer. in my case I did:<br/>
- <b>flashrom -p buspirate_spi:dev=/dev/ttyUSB0 -w bin/t60/libreboot_usqwerty.rom</b><br/>
- Note: there are also other ROM images for T60<br/>
- Note: this is using buspirate as the programmer, so it is flashing the T60, not the 2nd computer!<br/>
- Here's my terminal window on the 2nd computer (also the programmer is active):<br/>
- <img src="t60_dev/0037.JPG" alt="" /> <img src="t60_dev/0038.JPG" alt="" /><br/>
- So, you should see the following:<br/>
- --
- <pre>
- flashrom v0.9.5.2-r1517 on Linux 3.2.0-61-generic (i686), built with libpci 3.1.8, GCC 4.6.3, little endian
- flashrom is free software, get the source code at http://www.flashrom.org
-
- Calibrating delay loop... delay loop is unreliable, trying to continue OK.
- Found Macronix flash chip "MX25L1605" (2048 kB, SPI) on buspirate_spi.
- Reading old flash chip contents... done.
- Erasing and writing flash chip... Erase/write done.
- Verifying flash... VERIFIED.
- </pre>
- --<br/>
- At the end it says "VERIFIED", which means that the procedure worked. If you see this, it means
- that you can put your T60 back together. So let's do that now.
- </p>
-
- <p>
- Put those screws back:<br/>
- <img src="t60_dev/0047.JPG" alt="" />
- </p>
-
- <p>
- Put it back into lower chassis:<br/>
- <img src="t60_dev/0048.JPG" alt="" />
- </p>
-
- <p>
- Attach LCD and insert screws (also, attach the lcd cable to the board):<br/>
- <img src="t60_dev/0049.JPG" alt="" />
- </p>
-
- <p>
- Insert those screws:<br/>
- <img src="t60_dev/0050.JPG" alt="" />
- </p>
-
- <p>
- On the CPU (and there is another chip south-east to it, sorry forgot to take pic)
- clean off the old thermal paste (rubbing a1ocheal (misspelling intentional. halal internet)) and apply new (Artic Silver 5 is good, others are good too)
- you should also clean the heatsink the same way<br/>
- <img src="t60_dev/0051.JPG" alt="" />
- </p>
-
- <p>
- Attach the heatsink and install the screws (also, make sure to install the AC jack as highlighted):<br/>
- <img src="t60_dev/0052.JPG" alt="" />
- </p>
-
- <p>
- Reinstall that upper bezel:<br/>
- <img src="t60_dev/0053.JPG" alt="" />
- </p>
-
- <p>
- Do that:<br/>
- <img src="t60_dev/0054.JPG" alt="" /> <img src="t60_dev/0055.JPG" alt="" />
- </p>
-
- <p>
- Re-attach modem, wifi, (wwan?), and all necessary cables. Sorry, forgot to take pics. Look at previous removal steps to see where they go back to.
- </p>
-
- <p>
- Attach keyboard and install nvram battery:<br/>
- <img src="t60_dev/0056.JPG" alt="" /> <img src="t60_dev/0057.JPG" alt="" />
- </p>
-
- <p>
- Place keyboard and (sorry, forgot to take pics) reinstall the palmrest and insert screws on the underside:<br/>
- <img src="t60_dev/0058.JPG" alt="" />
- </p>
-
- <p>
- It lives!<br/>
- <img src="t60_dev/0071.JPG" alt="" /> <img src="t60_dev/0072.JPG" alt="" /> <img src="t60_dev/0073.JPG" alt="" />
- </p>
-
- <p>
- Always stress test ('stress -c 2' and xsensors. below 90C is ok) when replacing cpu paste/heatsink:<br/>
- <img src="t60_dev/0074.JPG" alt="" />
- </p>
-
-<hr/>
-
- <p>
- Copyright &copy; 2014 Francis Rowe &lt;info@gluglug.org.uk&gt;<br/>
- This document is released under the Creative Commons Attribution-ShareAlike 4.0 International Public License and all future versions.
- A copy of the license can be found at <a href="../license.txt">../license.txt</a>.
- </p>
-
- <p>
- This document is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See <a href="../license.txt">../license.txt</a> for more information.
- </p>
-
-</body>
-</html>