KGPE-D16: update patch set (also update coreboot and vboot)

Also contains other fixes from coreboot, like:
* 551cff0 Derive lvds_dual_channel from EDID timings.
^ makes single/dual channel LVDS selection on GM45 automatic
* 26fc544 lenovo/t60: Enable native intel gfx init.
^ was being maintained in libreboot, now upstreamed so not needed

Framebuffer mode was disabled for the KGPE-D16, because only
text-mode works at the moment.

1 files changed, 0 insertions, 140 deletions

diff --git a/resources/libreboot/patch/kgpe-d16/0066-southbridge-amd-sb700-Do-drive-detection-even-in-AHC.patch b/resources/libreboot/patch/kgpe-d16/0066-southbridge-amd-sb700-Do-drive-detection-even-in-AHC.patch
deleted file mode 100644
index 3c6c1f3..0000000
--- a/resources/libreboot/patch/kgpe-d16/0066-southbridge-amd-sb700-Do-drive-detection-even-in-AHC.patch
+++ /dev/null
@@ -1,140 +0,0 @@
-From b199e0e69955a8313cee68c1d589cac5956982b9 Mon Sep 17 00:00:00 2001
-From: Timothy Pearson <kb9vqf@pearsoncomputing.net>
-Date: Sat, 20 Jun 2015 21:31:15 -0500
-Subject: [PATCH 066/146] southbridge/amd/sb700: Do drive detection even in
- AHCI mode
-
-SeaBIOS AHCI drive detection randomly fails for drives present
-on the secondary channel of each AHCI SATA BAR.  Forcing native
-drive detection in AHCI mode resolves this issue.
----
- src/southbridge/amd/sb700/sata.c |  101 ++++++++++++++++++++------------------
- 1 file changed, 54 insertions(+), 47 deletions(-)
-
-diff --git a/src/southbridge/amd/sb700/sata.c b/src/southbridge/amd/sb700/sata.c
-index 10dbca2..6afdfdf 100644
---- a/src/southbridge/amd/sb700/sata.c
-+++ b/src/southbridge/amd/sb700/sata.c
-@@ -301,65 +301,72 @@ static void sata_init(struct device *dev)
- 	if (port_count > max_port_count)
- 		port_count = max_port_count;
- 
--	if (!sata_ahci_mode) {
--		/* RPR7.7 SATA drive detection. */
--		/* Use BAR5+0x128,BAR0 for Primary Slave */
--		/* Use BAR5+0x1A8,BAR0 for Primary Slave */
--		/* Use BAR5+0x228,BAR2 for Secondary Master */
--		/* Use BAR5+0x2A8,BAR2 for Secondary Slave */
--		/* Use BAR5+0x328,PATA_BAR0/2 for Primary/Secondary Master emulation */
--		/* Use BAR5+0x3A8,PATA_BAR0/2 for Primary/Secondary Slave emulation */
--		for (i = 0; i < port_count; i++) {
-+	/* RPR7.7 SATA drive detection. */
-+	/* Use BAR5+0x128,BAR0 for Primary Slave */
-+	/* Use BAR5+0x1A8,BAR0 for Primary Slave */
-+	/* Use BAR5+0x228,BAR2 for Secondary Master */
-+	/* Use BAR5+0x2A8,BAR2 for Secondary Slave */
-+	/* Use BAR5+0x328,PATA_BAR0/2 for Primary/Secondary Master emulation */
-+	/* Use BAR5+0x3A8,PATA_BAR0/2 for Primary/Secondary Slave emulation */
-+	for (i = 0; i < port_count; i++) {
-+		byte = read8(sata_bar5 + 0x128 + 0x80 * i);
-+		printk(BIOS_SPEW, "SATA port %i status = %x\n", i, byte);
-+		byte &= 0xF;
-+		if (byte == 0x1) {
-+			/* If the drive status is 0x1 then we see it but we aren't talking to it. */
-+			/* Try to do something about it. */
-+			printk(BIOS_SPEW, "SATA device detected but not talking. Trying lower speed.\n");
-+
-+			/* Read in Port-N Serial ATA Control Register */
-+			byte = read8(sata_bar5 + 0x12C + 0x80 * i);
-+
-+			/* Set Reset Bit and 1.5g bit */
-+			byte |= 0x11;
-+			write8((sata_bar5 + 0x12C + 0x80 * i), byte);
-+
-+			/* Wait 1ms */
-+			mdelay(1);
-+
-+			/* Clear Reset Bit */
-+			byte &= ~0x01;
-+			write8((sata_bar5 + 0x12C + 0x80 * i), byte);
-+
-+			/* Wait 1ms */
-+			mdelay(1);
-+
-+			/* Reread status */
- 			byte = read8(sata_bar5 + 0x128 + 0x80 * i);
- 			printk(BIOS_SPEW, "SATA port %i status = %x\n", i, byte);
- 			byte &= 0xF;
--			if (byte == 0x1) {
--				/* If the drive status is 0x1 then we see it but we aren't talking to it. */
--				/* Try to do something about it. */
--				printk(BIOS_SPEW, "SATA device detected but not talking. Trying lower speed.\n");
--	
--				/* Read in Port-N Serial ATA Control Register */
--				byte = read8(sata_bar5 + 0x12C + 0x80 * i);
--	
--				/* Set Reset Bit and 1.5g bit */
--				byte |= 0x11;
--				write8((sata_bar5 + 0x12C + 0x80 * i), byte);
--	
--				/* Wait 1ms */
--				mdelay(1);
--	
--				/* Clear Reset Bit */
--				byte &= ~0x01;
--				write8((sata_bar5 + 0x12C + 0x80 * i), byte);
--	
--				/* Wait 1ms */
--				mdelay(1);
--	
--				/* Reread status */
--				byte = read8(sata_bar5 + 0x128 + 0x80 * i);
--				printk(BIOS_SPEW, "SATA port %i status = %x\n", i, byte);
--				byte &= 0xF;
-+		}
-+
-+		if (byte == 0x3) {
-+			for (j = 0; j < 10; j++) {
-+				if (i < 4)
-+					current_bar = ((i / 2) == 0) ? sata_bar0 : sata_bar2;
-+				else
-+					current_bar = ide_bar0;
-+				if (!sata_drive_detect(i, current_bar))
-+					break;
- 			}
--	
--			if (byte == 0x3) {
--				for (j = 0; j < 10; j++) {
--					if (i < 4)
--						current_bar = ((i / 2) == 0) ? sata_bar0 : sata_bar2;
--					else
--						current_bar = ide_bar0;
--					if (!sata_drive_detect(i, current_bar))
--						break;
--				}
-+			if (sata_ahci_mode)
-+				printk(BIOS_DEBUG, "AHCI device %d is %sready after %i tries\n",
-+						i,
-+						(j == 10) ? "not " : "",
-+						(j == 10) ? j : j + 1);
-+			else 
- 				printk(BIOS_DEBUG, "%s %s device is %sready after %i tries\n",
- 						(i / 2) ? "Secondary" : "Primary",
- 						(i % 2 ) ? "Slave" : "Master",
- 						(j == 10) ? "not " : "",
- 						(j == 10) ? j : j + 1);
--			} else {
-+		} else {
-+			if (sata_ahci_mode)
-+				printk(BIOS_DEBUG, "No AHCI SATA drive on Slot%i\n", i);
-+			else
- 				printk(BIOS_DEBUG, "No %s %s SATA drive on Slot%i\n",
- 						(i / 2) ? "Secondary" : "Primary",
- 						(i % 2 ) ? "Slave" : "Master", i);
--			}
- 		}
- 	}
- 
--- 
-1.7.9.5
-