New board: ASUS KGPE-D16

coreboot build errors:

In file included from src/northbridge/amd/amdfam10/misc_control.c:35:0:
src/include/option.h:13:27: error: static declaration of 'get_option' follows non-static declaration
 static inline enum cb_err get_option(void *dest, const char *name)
                           ^
In file included from src/northbridge/amd/amdfam10/misc_control.c:34:0:
src/include/pc80/mc146818rtc.h:176:13: note: previous declaration of 'get_option' was here
 enum cb_err get_option(void *dest, const char *name);

Ping tpearson about this.

Also ping him about the fact that there isn't actually an option to
enable or disable native graphics initialization, but that the option
MAINBOARD_HAS_NATIVE_VGA_INIT_TEXTMODECFG is in fact available and set to Y in the
Kconfig file. I think this is probably since there isn't even an option
ROM available for the machine, so it's pointless to offer the setting.

1 files changed, 80 insertions, 0 deletions

diff --git a/resources/libreboot/patch/kgpe-d16/0020-superio-nuvoton-nct5572d-Enable-power-state-after-po.patch b/resources/libreboot/patch/kgpe-d16/0020-superio-nuvoton-nct5572d-Enable-power-state-after-po.patch
new file mode 100644
index 0000000..7f55dae
--- /dev/null
+++ b/resources/libreboot/patch/kgpe-d16/0020-superio-nuvoton-nct5572d-Enable-power-state-after-po.patch
@@ -0,0 +1,80 @@
+From 5f367eefa624cdc66127e0effafdc08d68352c4e Mon Sep 17 00:00:00 2001
+From: Timothy Pearson <kb9vqf@pearsoncomputing.net>
+Date: Sat, 5 Sep 2015 18:26:30 -0500
+Subject: [PATCH 020/146] superio/nuvoton/nct5572d: Enable power state after
+ power failure support
+
+---
+ src/superio/nuvoton/nct5572d/superio.c |   31 +++++++++++++++++++++++++++++++
+ 1 file changed, 31 insertions(+)
+
+diff --git a/src/superio/nuvoton/nct5572d/superio.c b/src/superio/nuvoton/nct5572d/superio.c
+index c5278d6..ccf2416 100644
+--- a/src/superio/nuvoton/nct5572d/superio.c
++++ b/src/superio/nuvoton/nct5572d/superio.c
+@@ -3,6 +3,7 @@
+  *
+  * Copyright (C) 2014 Felix Held <felix-coreboot@felixheld.de>
+  * Copyright (C) 2014 Edward O'Callaghan <eocallaghan@alterapraxis.com>
++ * Copyright (C) 2015 Timothy Pearson <tpearson@raptorengineeringinc.com>, Raptor Engineering
+  *
+  * This program is free software; you can redistribute it and/or modify
+  * it under the terms of the GNU General Public License as published by
+@@ -19,17 +20,29 @@
+  * Foundation, Inc.
+  */
+ 
++#include <console/console.h>
+ #include <arch/io.h>
+ #include <device/device.h>
+ #include <device/pnp.h>
+ #include <pc80/keyboard.h>
++#include <pc80/mc146818rtc.h>
+ #include <stdlib.h>
+ #include <superio/conf_mode.h>
+ 
+ #include "nct5572d.h"
+ 
++#define MAINBOARD_POWER_OFF 0
++#define MAINBOARD_POWER_ON 1
++
++#ifndef CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL
++#define CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL MAINBOARD_POWER_ON
++#endif
++
+ static void nct5572d_init(struct device *dev)
+ {
++	uint8_t byte;
++	uint32_t power_status;
++
+ 	if (!dev->enabled)
+ 		return;
+ 
+@@ -38,6 +51,24 @@ static void nct5572d_init(struct device *dev)
+ 	case NCT5572D_KBC:
+ 		pc_keyboard_init();
+ 		break;
++	case NCT5572D_ACPI:
++		/* Set power state after power fail */
++		power_status = CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL;
++		get_option(&power_status, "power_on_after_fail");
++		pnp_enter_conf_mode_8787(dev);
++		outb(0x07, dev->path.pnp.port);
++		outb(NCT5572D_ACPI, dev->path.pnp.port+1);	/* ACPI function */
++		outb(0xe4, dev->path.pnp.port);			/* CRE4 */
++		byte = inb(dev->path.pnp.port+1);
++		byte &= ~0x60;
++		if (power_status == 1)
++			byte |= (0x1 << 5);    /* Force power on */
++		else if (power_status == 2)
++			byte |= (0x2 << 5);    /* Use last power state */
++		outb(byte, dev->path.pnp.port+1);
++		pnp_exit_conf_mode_aa(dev);
++		printk(BIOS_INFO, "set power %s after power fail\n", power_status ? "on" : "off");
++		break;
+ 	}
+ }
+ 
+-- 
+1.7.9.5
+