Update coreboot (kgpe-d16,kcma-d8,kfsn4-dre,d510mo,ga-g41m-es2l)

Update to the latest coreboot and vboot versions at the time of writing:
coreboot 2a3434757ef425dbdfedf1fc69e1a033a6e7310d
vboot d187cd3fc792f8bcefbee4587c83eafbd08441fc

1 files changed, 0 insertions, 323 deletions

diff --git a/resources/libreboot/patch/coreboot/33fb4cf0ffb01be8bcb6b488872c87eb50e7d77f/grub/kgpe-d16/0005-mainboard-Update-mainboards-using-the-w83795-sensor-.patch b/resources/libreboot/patch/coreboot/33fb4cf0ffb01be8bcb6b488872c87eb50e7d77f/grub/kgpe-d16/0005-mainboard-Update-mainboards-using-the-w83795-sensor-.patch
deleted file mode 100644
index e848f49..0000000
--- a/resources/libreboot/patch/coreboot/33fb4cf0ffb01be8bcb6b488872c87eb50e7d77f/grub/kgpe-d16/0005-mainboard-Update-mainboards-using-the-w83795-sensor-.patch
+++ /dev/null
@@ -1,323 +0,0 @@
-From 2b9d5ca0b29cbe6e1600879b5cc731c2c4cb106d Mon Sep 17 00:00:00 2001
-From: Timothy Pearson <tpearson@raptorengineeringinc.com>
-Date: Thu, 22 Oct 2015 02:53:39 -0500
-Subject: [PATCH 005/143] mainboard: Update mainboards using the w83795 sensor
- device
-
-Update mainboards using the w83795 sensor device with sane default
-values.  Note that in some cases the defaults may vary from the
-defaults provided by the old driver, for example the default fan
-speeds and control modes have changed as I do not have any information
-on the correct sensor to fan mappings for these boards.
-
-Change-Id: Id2ad6222d7a0f29483b022fa097d7d098c6b4122
-Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
----
- src/mainboard/supermicro/h8qgi/devicetree.cb |   89 ++++++++++++++++++++++++++
- src/mainboard/supermicro/h8scm/devicetree.cb |   89 ++++++++++++++++++++++++++
- src/mainboard/tyan/s8226/devicetree.cb       |   89 ++++++++++++++++++++++++++
- 3 files changed, 267 insertions(+)
-
-diff --git a/src/mainboard/supermicro/h8qgi/devicetree.cb b/src/mainboard/supermicro/h8qgi/devicetree.cb
-index 59740c9..6c3ee90 100644
---- a/src/mainboard/supermicro/h8qgi/devicetree.cb
-+++ b/src/mainboard/supermicro/h8qgi/devicetree.cb
-@@ -107,6 +107,95 @@ chip northbridge/amd/agesa/family15/root_complex
- 							end
- 						end #superio/winbond/w83627dhg
- 						chip drivers/i2c/w83795
-+							register "fanin_ctl1" = "0xff"			# Enable monitoring of FANIN1 - FANIN8
-+							register "fanin_ctl2" = "0x00"			# Connect FANIN11 - FANIN14 to alternate functions
-+							register "temp_ctl1" = "0x2a"			# Enable monitoring of DTS, VSEN12, and VSEN13
-+							register "temp_ctl2" = "0x01"			# Enable monitoring of TD1/TR1
-+							register "temp_dtse" = "0x03"			# Enable DTS1 and DTS2
-+							register "volt_ctl1" = "0xff"			# Enable monitoring of VSEN1 - VSEN8
-+							register "volt_ctl2" = "0xf7"			# Enable monitoring of VSEN9 - VSEN11, 3VDD, 3VSB, and VBAT
-+							register "temp1_fan_select" = "0x00"		# All fans to manual mode (no dependence on Temp1)
-+							register "temp2_fan_select" = "0x00"		# All fans to manual mode (no dependence on Temp2)
-+							register "temp3_fan_select" = "0x00"		# All fans to manual mode (no dependence on Temp3)
-+							register "temp4_fan_select" = "0x00"		# All fans to manual mode (no dependence on Temp4)
-+							register "temp5_fan_select" = "0x00"		# All fans to manual mode (no dependence on Temp5)
-+							register "temp6_fan_select" = "0x00"		# All fans to manual mode (no dependence on Temp6)
-+							register "temp1_source_select" = "0x00"		# Use TD1/TR1 as data source for Temp1
-+							register "temp2_source_select" = "0x00"		# Use TD2/TR2 as data source for Temp2
-+							register "temp3_source_select" = "0x00"		# Use TD3/TR3 as data source for Temp3
-+							register "temp4_source_select" = "0x00"		# Use TD4/TR4 as data source for Temp4
-+							register "temp5_source_select" = "0x00"		# Use TR5 as data source for Temp5
-+							register "temp6_source_select" = "0x00"		# Use TR6 as data source for Temp6
-+							register "tr1_critical_temperature" = "85"	# Set TD1/TR1 critical temperature to 85°C
-+							register "tr1_critical_hysteresis" = "80"	# Set TD1/TR1 critical hysteresis temperature to 80°C
-+							register "tr1_warning_temperature" = "70"	# Set TD1/TR1 warning temperature to 70°C
-+							register "tr1_warning_hysteresis" = "65"	# Set TD1/TR1 warning hysteresis temperature to 65°C
-+							register "dts_critical_temperature" = "85"	# Set DTS (CPU) critical temperature to 85°C
-+							register "dts_critical_hysteresis" = "80"	# Set DTS (CPU) critical hysteresis temperature to 80°C
-+							register "dts_warning_temperature" = "70"	# Set DTS (CPU) warning temperature to 70°C
-+							register "dts_warning_hysteresis" = "65"	# Set DTS (CPU) warning hysteresis temperature to 65°C
-+							register "temp1_critical_temperature" = "80"	# Set Temp1 critical temperature to 80°C
-+							register "temp2_critical_temperature" = "80"	# Set Temp1 critical temperature to 80°C
-+							register "temp3_critical_temperature" = "80"	# Set Temp1 critical temperature to 80°C
-+							register "temp4_critical_temperature" = "80"	# Set Temp1 critical temperature to 80°C
-+							register "temp5_critical_temperature" = "80"	# Set Temp1 critical temperature to 80°C
-+							register "temp6_critical_temperature" = "80"	# Set Temp1 critical temperature to 80°C
-+							register "temp1_target_temperature" = "80"	# Set Temp1 target temperature to 80°C
-+							register "temp2_target_temperature" = "80"	# Set Temp1 target temperature to 80°C
-+							register "temp3_target_temperature" = "80"	# Set Temp1 target temperature to 80°C
-+							register "temp4_target_temperature" = "80"	# Set Temp1 target temperature to 80°C
-+							register "temp5_target_temperature" = "80"	# Set Temp1 target temperature to 80°C
-+							register "temp6_target_temperature" = "80"	# Set Temp1 target temperature to 80°C
-+							register "fan1_nonstop" = "7"			# Set Fan 1 minimum speed
-+							register "fan2_nonstop" = "7"			# Set Fan 2 minimum speed
-+							register "fan3_nonstop" = "7"			# Set Fan 3 minimum speed
-+							register "fan4_nonstop" = "7"			# Set Fan 4 minimum speed
-+							register "fan5_nonstop" = "7"			# Set Fan 5 minimum speed
-+							register "fan6_nonstop" = "7"			# Set Fan 6 minimum speed
-+							register "fan7_nonstop" = "7"			# Set Fan 7 minimum speed
-+							register "fan8_nonstop" = "7"			# Set Fan 8 minimum speed
-+							register "default_speed" = "100"		# All fans to full speed on power up
-+							register "fan1_duty" = "100"			# Fan 1 to full speed
-+							register "fan2_duty" = "100"			# Fan 2 to full speed
-+							register "fan3_duty" = "100"			# Fan 3 to full speed
-+							register "fan4_duty" = "100"			# Fan 4 to full speed
-+							register "fan5_duty" = "100"			# Fan 5 to full speed
-+							register "fan6_duty" = "100"			# Fan 6 to full speed
-+							register "fan7_duty" = "100"			# Fan 7 to full speed
-+							register "fan8_duty" = "100"			# Fan 8 to full speed
-+							register "vcore1_high_limit_mv" = "1500"	# VCORE1 (Node 0) high limit to 1.5V
-+							register "vcore1_low_limit_mv" = "900"		# VCORE1 (Node 0) low limit to 0.9V
-+							register "vcore2_high_limit_mv" = "1500"	# VCORE2 (Node 1) high limit to 1.5V
-+							register "vcore2_low_limit_mv" = "900"		# VCORE2 (Node 1) low limit to 0.9V
-+							register "vsen3_high_limit_mv" = "1600"		# VSEN1 (Node 0 RAM voltage) high limit to 1.6V
-+							register "vsen3_low_limit_mv" = "1100"		# VSEN1 (Node 0 RAM voltage) low limit to 1.1V
-+							register "vsen4_high_limit_mv" = "1600"		# VSEN2 (Node 1 RAM voltage) high limit to 1.6V
-+							register "vsen4_low_limit_mv" = "1100"		# VSEN2 (Node 1 RAM voltage) low limit to 1.1V
-+							register "vsen5_high_limit_mv" = "1250"		# VSEN5 (Node 0 HT link voltage) high limit to 1.25V
-+							register "vsen5_low_limit_mv" = "1150"		# VSEN5 (Node 0 HT link voltage) low limit to 1.15V
-+							register "vsen6_high_limit_mv" = "1250"		# VSEN6 (Node 1 HT link voltage) high limit to 1.25V
-+							register "vsen6_low_limit_mv" = "1150"		# VSEN6 (Node 1 HT link voltage) low limit to 1.15V
-+							register "vsen7_high_limit_mv" = "1150"		# VSEN7 (Northbridge core voltage) high limit to 1.15V
-+							register "vsen7_low_limit_mv" = "1050"		# VSEN7 (Northbridge core voltage) low limit to 1.05V
-+							register "vsen8_high_limit_mv" = "1900"		# VSEN8 (+1.8V) high limit to 1.9V
-+							register "vsen8_low_limit_mv" = "1700"		# VSEN8 (+1.8V) low limit to 1.7V
-+							register "vsen9_high_limit_mv" = "1250"		# VSEN9 (+1.2V) high limit to 1.25V
-+							register "vsen9_low_limit_mv" = "1150"		# VSEN9 (+1.2V) low limit to 1.15V
-+							register "vsen10_high_limit_mv" = "1150"	# VSEN10 (+1.1V) high limit to 1.15V
-+							register "vsen10_low_limit_mv" = "1050"		# VSEN10 (+1.1V) low limit to 1.05V
-+							register "vsen11_high_limit_mv" = "1625"	# VSEN11 (5VSB, scaling factor ~3.2) high limit to 5.2V
-+							register "vsen11_low_limit_mv" = "1500"		# VSEN11 (5VSB, scaling factor ~3.2) low limit to 4.8V
-+							register "vsen12_high_limit_mv" = "1083"	# VSEN12 (+12V, scaling factor ~12) high limit to 13V
-+							register "vsen12_low_limit_mv" = "917"		# VSEN12 (+12V, scaling factor ~12) low limit to 11V
-+							register "vsen13_high_limit_mv" = "1625"	# VSEN13 (+5V, scaling factor ~3.2) high limit to 5.2V
-+							register "vsen13_low_limit_mv" = "1500"		# VSEN13 (+5V, scaling factor ~3.2) low limit to 4.8V
-+							register "vdd_high_limit_mv" = "3500"		# 3VDD high limit to 3.5V
-+							register "vdd_low_limit_mv" = "3100"		# 3VDD low limit to 3.1V
-+							register "vsb_high_limit_mv" = "3500"		# 3VSB high limit to 3.5V
-+							register "vsb_low_limit_mv" = "3100"		# 3VSB low limit to 3.1V
-+							register "vbat_high_limit_mv" = "3500"		# VBAT (+3V) high limit to 3.5V
-+							register "vbat_low_limit_mv" = "2500"		# VBAT (+3V) low limit to 2.5V
-+							register "smbus_aux" = "0"			# Device located on primary SMBUS
- 							device pnp 5e on #hwm
- 							end
- 						end #drivers/i2c/w83795
-diff --git a/src/mainboard/supermicro/h8scm/devicetree.cb b/src/mainboard/supermicro/h8scm/devicetree.cb
-index b8fb823..a280e62 100644
---- a/src/mainboard/supermicro/h8scm/devicetree.cb
-+++ b/src/mainboard/supermicro/h8scm/devicetree.cb
-@@ -106,6 +106,95 @@ chip northbridge/amd/agesa/family15/root_complex
- 							end
- 						end #superio/winbond/w83627dhg
- 						chip drivers/i2c/w83795
-+							register "fanin_ctl1" = "0xff"			# Enable monitoring of FANIN1 - FANIN8
-+							register "fanin_ctl2" = "0x00"			# Connect FANIN11 - FANIN14 to alternate functions
-+							register "temp_ctl1" = "0x2a"			# Enable monitoring of DTS, VSEN12, and VSEN13
-+							register "temp_ctl2" = "0x01"			# Enable monitoring of TD1/TR1
-+							register "temp_dtse" = "0x03"			# Enable DTS1 and DTS2
-+							register "volt_ctl1" = "0xff"			# Enable monitoring of VSEN1 - VSEN8
-+							register "volt_ctl2" = "0xf7"			# Enable monitoring of VSEN9 - VSEN11, 3VDD, 3VSB, and VBAT
-+							register "temp1_fan_select" = "0x00"		# All fans to manual mode (no dependence on Temp1)
-+							register "temp2_fan_select" = "0x00"		# All fans to manual mode (no dependence on Temp2)
-+							register "temp3_fan_select" = "0x00"		# All fans to manual mode (no dependence on Temp3)
-+							register "temp4_fan_select" = "0x00"		# All fans to manual mode (no dependence on Temp4)
-+							register "temp5_fan_select" = "0x00"		# All fans to manual mode (no dependence on Temp5)
-+							register "temp6_fan_select" = "0x00"		# All fans to manual mode (no dependence on Temp6)
-+							register "temp1_source_select" = "0x00"		# Use TD1/TR1 as data source for Temp1
-+							register "temp2_source_select" = "0x00"		# Use TD2/TR2 as data source for Temp2
-+							register "temp3_source_select" = "0x00"		# Use TD3/TR3 as data source for Temp3
-+							register "temp4_source_select" = "0x00"		# Use TD4/TR4 as data source for Temp4
-+							register "temp5_source_select" = "0x00"		# Use TR5 as data source for Temp5
-+							register "temp6_source_select" = "0x00"		# Use TR6 as data source for Temp6
-+							register "tr1_critical_temperature" = "85"	# Set TD1/TR1 critical temperature to 85°C
-+							register "tr1_critical_hysteresis" = "80"	# Set TD1/TR1 critical hysteresis temperature to 80°C
-+							register "tr1_warning_temperature" = "70"	# Set TD1/TR1 warning temperature to 70°C
-+							register "tr1_warning_hysteresis" = "65"	# Set TD1/TR1 warning hysteresis temperature to 65°C
-+							register "dts_critical_temperature" = "85"	# Set DTS (CPU) critical temperature to 85°C
-+							register "dts_critical_hysteresis" = "80"	# Set DTS (CPU) critical hysteresis temperature to 80°C
-+							register "dts_warning_temperature" = "70"	# Set DTS (CPU) warning temperature to 70°C
-+							register "dts_warning_hysteresis" = "65"	# Set DTS (CPU) warning hysteresis temperature to 65°C
-+							register "temp1_critical_temperature" = "80"	# Set Temp1 critical temperature to 80°C
-+							register "temp2_critical_temperature" = "80"	# Set Temp1 critical temperature to 80°C
-+							register "temp3_critical_temperature" = "80"	# Set Temp1 critical temperature to 80°C
-+							register "temp4_critical_temperature" = "80"	# Set Temp1 critical temperature to 80°C
-+							register "temp5_critical_temperature" = "80"	# Set Temp1 critical temperature to 80°C
-+							register "temp6_critical_temperature" = "80"	# Set Temp1 critical temperature to 80°C
-+							register "temp1_target_temperature" = "80"	# Set Temp1 target temperature to 80°C
-+							register "temp2_target_temperature" = "80"	# Set Temp1 target temperature to 80°C
-+							register "temp3_target_temperature" = "80"	# Set Temp1 target temperature to 80°C
-+							register "temp4_target_temperature" = "80"	# Set Temp1 target temperature to 80°C
-+							register "temp5_target_temperature" = "80"	# Set Temp1 target temperature to 80°C
-+							register "temp6_target_temperature" = "80"	# Set Temp1 target temperature to 80°C
-+							register "fan1_nonstop" = "7"			# Set Fan 1 minimum speed
-+							register "fan2_nonstop" = "7"			# Set Fan 2 minimum speed
-+							register "fan3_nonstop" = "7"			# Set Fan 3 minimum speed
-+							register "fan4_nonstop" = "7"			# Set Fan 4 minimum speed
-+							register "fan5_nonstop" = "7"			# Set Fan 5 minimum speed
-+							register "fan6_nonstop" = "7"			# Set Fan 6 minimum speed
-+							register "fan7_nonstop" = "7"			# Set Fan 7 minimum speed
-+							register "fan8_nonstop" = "7"			# Set Fan 8 minimum speed
-+							register "default_speed" = "100"		# All fans to full speed on power up
-+							register "fan1_duty" = "100"			# Fan 1 to full speed
-+							register "fan2_duty" = "100"			# Fan 2 to full speed
-+							register "fan3_duty" = "100"			# Fan 3 to full speed
-+							register "fan4_duty" = "100"			# Fan 4 to full speed
-+							register "fan5_duty" = "100"			# Fan 5 to full speed
-+							register "fan6_duty" = "100"			# Fan 6 to full speed
-+							register "fan7_duty" = "100"			# Fan 7 to full speed
-+							register "fan8_duty" = "100"			# Fan 8 to full speed
-+							register "vcore1_high_limit_mv" = "1500"	# VCORE1 (Node 0) high limit to 1.5V
-+							register "vcore1_low_limit_mv" = "900"		# VCORE1 (Node 0) low limit to 0.9V
-+							register "vcore2_high_limit_mv" = "1500"	# VCORE2 (Node 1) high limit to 1.5V
-+							register "vcore2_low_limit_mv" = "900"		# VCORE2 (Node 1) low limit to 0.9V
-+							register "vsen3_high_limit_mv" = "1600"		# VSEN1 (Node 0 RAM voltage) high limit to 1.6V
-+							register "vsen3_low_limit_mv" = "1100"		# VSEN1 (Node 0 RAM voltage) low limit to 1.1V
-+							register "vsen4_high_limit_mv" = "1600"		# VSEN2 (Node 1 RAM voltage) high limit to 1.6V
-+							register "vsen4_low_limit_mv" = "1100"		# VSEN2 (Node 1 RAM voltage) low limit to 1.1V
-+							register "vsen5_high_limit_mv" = "1250"		# VSEN5 (Node 0 HT link voltage) high limit to 1.25V
-+							register "vsen5_low_limit_mv" = "1150"		# VSEN5 (Node 0 HT link voltage) low limit to 1.15V
-+							register "vsen6_high_limit_mv" = "1250"		# VSEN6 (Node 1 HT link voltage) high limit to 1.25V
-+							register "vsen6_low_limit_mv" = "1150"		# VSEN6 (Node 1 HT link voltage) low limit to 1.15V
-+							register "vsen7_high_limit_mv" = "1150"		# VSEN7 (Northbridge core voltage) high limit to 1.15V
-+							register "vsen7_low_limit_mv" = "1050"		# VSEN7 (Northbridge core voltage) low limit to 1.05V
-+							register "vsen8_high_limit_mv" = "1900"		# VSEN8 (+1.8V) high limit to 1.9V
-+							register "vsen8_low_limit_mv" = "1700"		# VSEN8 (+1.8V) low limit to 1.7V
-+							register "vsen9_high_limit_mv" = "1250"		# VSEN9 (+1.2V) high limit to 1.25V
-+							register "vsen9_low_limit_mv" = "1150"		# VSEN9 (+1.2V) low limit to 1.15V
-+							register "vsen10_high_limit_mv" = "1150"	# VSEN10 (+1.1V) high limit to 1.15V
-+							register "vsen10_low_limit_mv" = "1050"		# VSEN10 (+1.1V) low limit to 1.05V
-+							register "vsen11_high_limit_mv" = "1625"	# VSEN11 (5VSB, scaling factor ~3.2) high limit to 5.2V
-+							register "vsen11_low_limit_mv" = "1500"		# VSEN11 (5VSB, scaling factor ~3.2) low limit to 4.8V
-+							register "vsen12_high_limit_mv" = "1083"	# VSEN12 (+12V, scaling factor ~12) high limit to 13V
-+							register "vsen12_low_limit_mv" = "917"		# VSEN12 (+12V, scaling factor ~12) low limit to 11V
-+							register "vsen13_high_limit_mv" = "1625"	# VSEN13 (+5V, scaling factor ~3.2) high limit to 5.2V
-+							register "vsen13_low_limit_mv" = "1500"		# VSEN13 (+5V, scaling factor ~3.2) low limit to 4.8V
-+							register "vdd_high_limit_mv" = "3500"		# 3VDD high limit to 3.5V
-+							register "vdd_low_limit_mv" = "3100"		# 3VDD low limit to 3.1V
-+							register "vsb_high_limit_mv" = "3500"		# 3VSB high limit to 3.5V
-+							register "vsb_low_limit_mv" = "3100"		# 3VSB low limit to 3.1V
-+							register "vbat_high_limit_mv" = "3500"		# VBAT (+3V) high limit to 3.5V
-+							register "vbat_low_limit_mv" = "2500"		# VBAT (+3V) low limit to 2.5V
-+							register "smbus_aux" = "0"			# Device located on primary SMBUS
- 							device pnp 5e on #hwm
- 							end
- 						end #drivers/i2c/w83795
-diff --git a/src/mainboard/tyan/s8226/devicetree.cb b/src/mainboard/tyan/s8226/devicetree.cb
-index 64701a5..9f5e584 100644
---- a/src/mainboard/tyan/s8226/devicetree.cb
-+++ b/src/mainboard/tyan/s8226/devicetree.cb
-@@ -106,6 +106,95 @@ chip northbridge/amd/agesa/family15/root_complex
- 							end
- 						end #superio/winbond/w83627dhg
- 						chip drivers/i2c/w83795
-+							register "fanin_ctl1" = "0xff"			# Enable monitoring of FANIN1 - FANIN8
-+							register "fanin_ctl2" = "0x00"			# Connect FANIN11 - FANIN14 to alternate functions
-+							register "temp_ctl1" = "0x2a"			# Enable monitoring of DTS, VSEN12, and VSEN13
-+							register "temp_ctl2" = "0x01"			# Enable monitoring of TD1/TR1
-+							register "temp_dtse" = "0x03"			# Enable DTS1 and DTS2
-+							register "volt_ctl1" = "0xff"			# Enable monitoring of VSEN1 - VSEN8
-+							register "volt_ctl2" = "0xf7"			# Enable monitoring of VSEN9 - VSEN11, 3VDD, 3VSB, and VBAT
-+							register "temp1_fan_select" = "0x00"		# All fans to manual mode (no dependence on Temp1)
-+							register "temp2_fan_select" = "0x00"		# All fans to manual mode (no dependence on Temp2)
-+							register "temp3_fan_select" = "0x00"		# All fans to manual mode (no dependence on Temp3)
-+							register "temp4_fan_select" = "0x00"		# All fans to manual mode (no dependence on Temp4)
-+							register "temp5_fan_select" = "0x00"		# All fans to manual mode (no dependence on Temp5)
-+							register "temp6_fan_select" = "0x00"		# All fans to manual mode (no dependence on Temp6)
-+							register "temp1_source_select" = "0x00"		# Use TD1/TR1 as data source for Temp1
-+							register "temp2_source_select" = "0x00"		# Use TD2/TR2 as data source for Temp2
-+							register "temp3_source_select" = "0x00"		# Use TD3/TR3 as data source for Temp3
-+							register "temp4_source_select" = "0x00"		# Use TD4/TR4 as data source for Temp4
-+							register "temp5_source_select" = "0x00"		# Use TR5 as data source for Temp5
-+							register "temp6_source_select" = "0x00"		# Use TR6 as data source for Temp6
-+							register "tr1_critical_temperature" = "85"	# Set TD1/TR1 critical temperature to 85°C
-+							register "tr1_critical_hysteresis" = "80"	# Set TD1/TR1 critical hysteresis temperature to 80°C
-+							register "tr1_warning_temperature" = "70"	# Set TD1/TR1 warning temperature to 70°C
-+							register "tr1_warning_hysteresis" = "65"	# Set TD1/TR1 warning hysteresis temperature to 65°C
-+							register "dts_critical_temperature" = "85"	# Set DTS (CPU) critical temperature to 85°C
-+							register "dts_critical_hysteresis" = "80"	# Set DTS (CPU) critical hysteresis temperature to 80°C
-+							register "dts_warning_temperature" = "70"	# Set DTS (CPU) warning temperature to 70°C
-+							register "dts_warning_hysteresis" = "65"	# Set DTS (CPU) warning hysteresis temperature to 65°C
-+							register "temp1_critical_temperature" = "80"	# Set Temp1 critical temperature to 80°C
-+							register "temp2_critical_temperature" = "80"	# Set Temp1 critical temperature to 80°C
-+							register "temp3_critical_temperature" = "80"	# Set Temp1 critical temperature to 80°C
-+							register "temp4_critical_temperature" = "80"	# Set Temp1 critical temperature to 80°C
-+							register "temp5_critical_temperature" = "80"	# Set Temp1 critical temperature to 80°C
-+							register "temp6_critical_temperature" = "80"	# Set Temp1 critical temperature to 80°C
-+							register "temp1_target_temperature" = "80"	# Set Temp1 target temperature to 80°C
-+							register "temp2_target_temperature" = "80"	# Set Temp1 target temperature to 80°C
-+							register "temp3_target_temperature" = "80"	# Set Temp1 target temperature to 80°C
-+							register "temp4_target_temperature" = "80"	# Set Temp1 target temperature to 80°C
-+							register "temp5_target_temperature" = "80"	# Set Temp1 target temperature to 80°C
-+							register "temp6_target_temperature" = "80"	# Set Temp1 target temperature to 80°C
-+							register "fan1_nonstop" = "7"			# Set Fan 1 minimum speed
-+							register "fan2_nonstop" = "7"			# Set Fan 2 minimum speed
-+							register "fan3_nonstop" = "7"			# Set Fan 3 minimum speed
-+							register "fan4_nonstop" = "7"			# Set Fan 4 minimum speed
-+							register "fan5_nonstop" = "7"			# Set Fan 5 minimum speed
-+							register "fan6_nonstop" = "7"			# Set Fan 6 minimum speed
-+							register "fan7_nonstop" = "7"			# Set Fan 7 minimum speed
-+							register "fan8_nonstop" = "7"			# Set Fan 8 minimum speed
-+							register "default_speed" = "100"		# All fans to full speed on power up
-+							register "fan1_duty" = "100"			# Fan 1 to full speed
-+							register "fan2_duty" = "100"			# Fan 2 to full speed
-+							register "fan3_duty" = "100"			# Fan 3 to full speed
-+							register "fan4_duty" = "100"			# Fan 4 to full speed
-+							register "fan5_duty" = "100"			# Fan 5 to full speed
-+							register "fan6_duty" = "100"			# Fan 6 to full speed
-+							register "fan7_duty" = "100"			# Fan 7 to full speed
-+							register "fan8_duty" = "100"			# Fan 8 to full speed
-+							register "vcore1_high_limit_mv" = "1500"	# VCORE1 (Node 0) high limit to 1.5V
-+							register "vcore1_low_limit_mv" = "900"		# VCORE1 (Node 0) low limit to 0.9V
-+							register "vcore2_high_limit_mv" = "1500"	# VCORE2 (Node 1) high limit to 1.5V
-+							register "vcore2_low_limit_mv" = "900"		# VCORE2 (Node 1) low limit to 0.9V
-+							register "vsen3_high_limit_mv" = "1600"		# VSEN1 (Node 0 RAM voltage) high limit to 1.6V
-+							register "vsen3_low_limit_mv" = "1100"		# VSEN1 (Node 0 RAM voltage) low limit to 1.1V
-+							register "vsen4_high_limit_mv" = "1600"		# VSEN2 (Node 1 RAM voltage) high limit to 1.6V
-+							register "vsen4_low_limit_mv" = "1100"		# VSEN2 (Node 1 RAM voltage) low limit to 1.1V
-+							register "vsen5_high_limit_mv" = "1250"		# VSEN5 (Node 0 HT link voltage) high limit to 1.25V
-+							register "vsen5_low_limit_mv" = "1150"		# VSEN5 (Node 0 HT link voltage) low limit to 1.15V
-+							register "vsen6_high_limit_mv" = "1250"		# VSEN6 (Node 1 HT link voltage) high limit to 1.25V
-+							register "vsen6_low_limit_mv" = "1150"		# VSEN6 (Node 1 HT link voltage) low limit to 1.15V
-+							register "vsen7_high_limit_mv" = "1150"		# VSEN7 (Northbridge core voltage) high limit to 1.15V
-+							register "vsen7_low_limit_mv" = "1050"		# VSEN7 (Northbridge core voltage) low limit to 1.05V
-+							register "vsen8_high_limit_mv" = "1900"		# VSEN8 (+1.8V) high limit to 1.9V
-+							register "vsen8_low_limit_mv" = "1700"		# VSEN8 (+1.8V) low limit to 1.7V
-+							register "vsen9_high_limit_mv" = "1250"		# VSEN9 (+1.2V) high limit to 1.25V
-+							register "vsen9_low_limit_mv" = "1150"		# VSEN9 (+1.2V) low limit to 1.15V
-+							register "vsen10_high_limit_mv" = "1150"	# VSEN10 (+1.1V) high limit to 1.15V
-+							register "vsen10_low_limit_mv" = "1050"		# VSEN10 (+1.1V) low limit to 1.05V
-+							register "vsen11_high_limit_mv" = "1625"	# VSEN11 (5VSB, scaling factor ~3.2) high limit to 5.2V
-+							register "vsen11_low_limit_mv" = "1500"		# VSEN11 (5VSB, scaling factor ~3.2) low limit to 4.8V
-+							register "vsen12_high_limit_mv" = "1083"	# VSEN12 (+12V, scaling factor ~12) high limit to 13V
-+							register "vsen12_low_limit_mv" = "917"		# VSEN12 (+12V, scaling factor ~12) low limit to 11V
-+							register "vsen13_high_limit_mv" = "1625"	# VSEN13 (+5V, scaling factor ~3.2) high limit to 5.2V
-+							register "vsen13_low_limit_mv" = "1500"		# VSEN13 (+5V, scaling factor ~3.2) low limit to 4.8V
-+							register "vdd_high_limit_mv" = "3500"		# 3VDD high limit to 3.5V
-+							register "vdd_low_limit_mv" = "3100"		# 3VDD low limit to 3.1V
-+							register "vsb_high_limit_mv" = "3500"		# 3VSB high limit to 3.5V
-+							register "vsb_low_limit_mv" = "3100"		# 3VSB low limit to 3.1V
-+							register "vbat_high_limit_mv" = "3500"		# VBAT (+3V) high limit to 3.5V
-+							register "vbat_low_limit_mv" = "2500"		# VBAT (+3V) low limit to 2.5V
-+							register "smbus_aux" = "0"			# Device located on primary SMBUS
- 							device pnp 5e on #hwm
- 							end
- 						end #drivers/i2c/w83795
--- 
-1.7.9.5
-