Add note about the Teensy 3.1 SPI flasher

1 files changed, 3 insertions, 1 deletions

diff --git a/docs/libreboot.texi b/docs/libreboot.texi
index 11adb5d..a788bea 100644
--- a/docs/libreboot.texi
+++ b/docs/libreboot.texi
@@ -2671,10 +2671,12 @@ The device will now boot to Libreboot.
 @end menu
 
 
-@node How to program an SPI flash chip with BeagleBone Black
+@node How to program an SPI flash chip with BeagleBone Black or Teensy 3.1
 @subsubsection How to program an SPI flash chip with the BeagleBone Black
 This document exists as a guide for reading from or writing to an SPI flash chip with the BeagleBone Black, using the @uref{http://flashrom.org/Flashrom,flashrom} software.  A BeagleBone Black, rev. C was used when creating this guide, but earlier revisions may also work.
 
+There was no justification for a further section for the Teensy. Simply refer to @uref{https://www.flashrom.org/Teensy_3.1_SPI_%2B_LPC/FWH_Flasher#ISP_Usage,this page on flashrom.org} for information about how to set it up, and correlate that with the pins on the SPI flash chip as per other guides in the libreboot documentation for each board. At the time of writing, the teensy is tested for flashing on the ThinkPad X200, but it should work for other targets.
+
 @menu
 * Hardware requirements - BBB::
 * Setting up the 33V DC PSU::