blob: 2f32c4c5c97715575aa2a0832ca80792372627bb (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
|
; Input file name: [input_filename]
; Printer preset: [printer_preset]
; Filament preset: [filament_preset]
; Print preset: [print_preset]
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;; Begin LulzBot Mini HIPS start G-code ;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
; Set units, positioning modes, and extruder origin
G21 ; Set units to millimeters
G90 ; Set absolute positioning mode
M82 ; Set E absolute mode (override G91)
G92 E0 ; Set extruder position to 0 (origin)
; Begin heating hotend to HIPS retraction temperature
M107 ; Turn off the print cooling fan
M104 S150 ; Set hotend temperature without waiting
M140 S[first_layer_bed_temperature] ; Set bed temperature without waiting
; While waiting for the hotend to heat, auto-home the axes
G28 ; Auto-home all axes
M109 ; Wait for hotend temperature
; Retract filament before wiping
G1 Z150 E-30 F75 ; Slowly lower Z and retract filament
; Begin heating hotend to HIPS wiping temperature
M104 S170 ; Set hotend temperature without waiting
; While waiting for the hotend to heat, position the nozzle over the wiping pad
G1 X45 Y174 Z10 F11520 ; Move nozzle to just over wiping pad
M109 ; Wait for hotend temperature
; Wipe the nozzle
G1 Z-0.5 F4000 ; Plunge nozzle into wiping pad
G1 X55 Y172 F4000 ; Wipe
G1 X45 Y174 Z0 F4000 ; Wipe
G1 X55 Y172 F4000 ; Wipe
G1 X45 Y174 F4000 ; Wipe
G1 X55 Y172 F4000 ; Wipe
G1 X45 Y174 F4000 ; Wipe
G1 X55 Y172 F4000 ; Wipe
G1 X60 Y174 F4000 ; Wipe
G1 X80 Y172 F4000 ; Wipe
G1 X60 Y174 F4000 ; Wipe
G1 X80 Y172 F4000 ; Wipe
G1 X60 Y174 F4000 ; Wipe
G1 X90 Y172 F4000 ; Wipe
G1 X80 Y174 F4000 ; Wipe
G1 X100 Y172 F4000 ; Wipe
G1 X80 Y174 F4000 ; Wipe
G1 X100 Y172 F4000 ; Wipe
G1 X80 Y174 F4000 ; Wipe
G1 X100 Y172 F4000 ; Wipe
G1 X110 Y174 F4000 ; Wipe
G1 X100 Y172 F4000 ; Wipe
G1 X110 Y174 F4000 ; Wipe
G1 X100 Y172 F4000 ; Wipe
G1 X110 Y174 F4000 ; Wipe
G1 X115 Y172 Z-0.5 F1000 ; Wipe slower, bury nozzle in cleanish area
G1 Z10 ; Lift out of wiping pad
; Begin heating hotend to HIPS probing temperature
M104 S170 ; Set hotend temperature without waiting
; While waiting for the hotend to heat, auto-home X and Y
G28 X0 Y0 ; Auto-home X and Y
M109 ; Wait for hotend temperature
; Probe the bed and enable bed leveling compensation
M204 S300 ; Set acceleration for probing moves
G29 ; Probe the bed
M204 S2000 ; Set acceleration back to normal
G1 X5 F5000 ; Move away from X endstop
G1 Z10 F5000 ; Lift off the bed-leveling washer
; Begin heating hotend to first layer temperature
M104 S[first_layer_temperature] ; Set hotend temperature without waiting
; While waiting for the hotend to heat, position the nozzle and pause
G1 X5 Y15 F5000 ; Move near front left corner
G4 S1 ; Dwell/pause command queue for 1 second
M400 ; Pause processing until moves complete
; Ensure the hotend and bed are at the first layer temperatures
M109 ; Wait for hotend temperature
M190 ; Wait for bed temperature
; Extrude filament back into the nozzle
G1 Z2 E0 F75 ; Slowly raise nozzle and extrude filamant
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;; End LulzBot Mini HIPS start G-code ;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
|
