dotfiles/slic3r.git - Slic3r configuration

	Commit message (Collapse)	Author	Age	Files	Lines
*	TAZ 6, SE v2.1 G-code: Move to wiping pad 0.6 s faster	P. J. McDermott	2019-02-14	3	-4/+4
\|
*	TAZ 6, SE v2.1, eSUN PLA: Wipe while retracting	P. J. McDermott	2019-02-14	1	-2/+2
\|
*	TAZ 6, SE v2.1, eSUN PLA; Base: Lift on retract, increase travel speed	P. J. McDermott	2019-02-14	1	-2/+2
\|
*	TAZ 6, SE v2.1, eSUN PLA: Increase retraction length and speed	P. J. McDermott	2019-02-14	1	-3/+3
\|
*	TAZ 6, SE v2.1, eSUN PLA: Decrease retraction and lift	P. J. McDermott	2019-02-13	1	-3/+3
\|
*	TAZ 6, SE v2.1, eSUN PLA: Increase retraction	P. J. McDermott	2019-02-13	1	-3/+3
\|
*	printer: Wiping what?	P. J. McDermott	2019-02-12	3	-3/+3
\|
*	printer: Prime nozzle in a corner, not center	P. J. McDermott	2019-02-12	3	-5/+5
\| \| \| \| \|	Priming drops filament onto the bed, which should be done outside of the print as much as possible.
*	printer: Add TAZ 6 SE v2.1 eSUN HIPS config	P. J. McDermott	2019-02-12	1	-0/+27
\|
*	printer: Preprocess G-code and inject into config	P. J. McDermott	2019-02-12	1	-2/+2
\| \| \| \|	Automatically done by slic3r-gpp.
*	printer: Add "eSUN" in TAZ 6 printer/filament name	P. J. McDermott	2019-02-12	1	-0/+0
\|
*	printer: Remind Marlin of bed temp in TAZ 6 start G-code	P. J. McDermott	2019-02-12	1	-1/+1
\|
*	printer: Parameterize temperatures in TAZ 6 G-code files	P. J. McDermott	2019-02-12	2	-24/+24
\|
*	printer: Remove filament from TAZ 6 G-code file names	P. J. McDermott	2019-02-12	2	-0/+0
\|
*	printer: Edit TAZ 6 end G-code	P. J. McDermott	2019-02-11	1	-2/+2
\| \| \| \|	Beep and stop the timer after the bed moves forward for print removal.
*	printer: Add TAZ 6 end G-code	P. J. McDermott	2019-02-11	1	-0/+44
\| \| \| \|	With an option to keep the hotend and bed warm for the next print!
*	printer: Edit TAZ 6 start G-code	P. J. McDermott	2019-02-11	1	-3/+3
\| \| \| \| \| \|	* Allow heating to wiping temperature before retraction completes * Allow heating to first layer temperature before probing completes * Improve centering M400 comment
*	printer: Edit TAZ 6 start G-code	P. J. McDermott	2019-02-11	1	-6/+6
\| \| \| \| \| \| \| \| \|	* Make M400 comments more specific * Allow first-layer heating to occur immediately after probing, instead of waiting to lift above washer * Drop G4 (dwell) command * Add M400 command to wait until end of extruder priming before showing "Printing..."
*	printer: Edit TAZ 6 start G-code	P. J. McDermott	2019-02-11	1	-11/+10
\| \| \| \| \| \| \| \|	* Drop useless M117 commands * Remind Marlin of target temperatures in M109 commands * Add pauses (M400) after movement commands (G1 and G28) and before M117, M104, etc. * Align wiping command comments
*	printer: Add untested TAZ 6 start G-code	P. J. McDermott	2019-02-10	1	-0/+129
\|
*	printer: Begin LulzBot TAZ 6, Single Extruder v2.1	P. J. McDermott	2019-02-10	1	-0/+27
\| \| \| \|	Also add logi1's window geometry in .Slic3r/slic3r.ini.
*	printer: Make end G-code result in extruder at 0 mm	P. J. McDermott	2017-08-22	2	-4/+4
\|
*	printer: Move X axis after probing	P. J. McDermott	2017-08-21	2	-2/+3
\| \| \| \| \| \| \|	Otherwise, the firmware detects that an endstop is triggered and blocks any other moves: echo:endstops hit: X:0.00
*	print: Move toolhead farther up for cooling and removal	P. J. McDermott	2017-08-21	2	-4/+4
\| \| \| \|	This should give a taller usable print area.
*	printer: Move bed farther forward for print removal	P. J. McDermott	2017-08-21	2	-3/+3
\|
*	printer: Add custom start/end G-code files	P. J. McDermott	2017-08-20	2	-0/+126
\| \| \| \| \| \| \| \| \| \| \|	G-code is easier to read in separate files than in Slic3r configuration. This G-code is based on the LulzBot Mini G-code provided by Aleph Objects. To increase speed, I added commands to set the hotend temperature without waiting and arranged some commands like G28 and G1 to run while the hotend heats up. For better clarity, I also added more comments and blank lines and vertically aligned wiping command arguments.
*	printer: Rewrite G-code, change bed size, rename preset	P. J. McDermott	2017-08-20	2	-27/+27
\|
*	printer: Use HIPS retraction, wiping, and probing temps	P. J. McDermott	2017-08-20	1	-2/+2
\|
*	printer: Reduce bed size and restore Z offset to 0	P. J. McDermott	2017-08-20	1	-3/+3
\|
*	printer: Increase retraction speed and Z offset	P. J. McDermott	2017-08-20	1	-3/+3
\|
*	Reduce printer Z offset	P. J. McDermott	2016-04-10	1	-2/+2
\|
*	Adjust printer retraction settings	P. J. McDermott	2016-04-10	1	-3/+3
\|
*	Add start and stop G-Code	P. J. McDermott	2016-04-10	1	-3/+20
\|
*	Rename printer profile	P. J. McDermott	2016-04-10	1	-0/+0
\|
*	Add printer settings	P. J. McDermott	2016-04-10	1	-0/+10