printer: Begin LulzBot TAZ 6, Single Extruder v2.1

Also add logi1's window geometry in .Slic3r/slic3r.ini.

1 files changed, 27 insertions, 0 deletions

diff --git a/.Slic3r/printer/LulzBot TAZ 6, Single Extruder v2.1, PLA.ini b/.Slic3r/printer/LulzBot TAZ 6, Single Extruder v2.1, PLA.ini
new file mode 100644
index 0000000..d82e81d
--- /dev/null
+++ b/.Slic3r/printer/LulzBot TAZ 6, Single Extruder v2.1, PLA.ini
@@ -0,0 +1,27 @@
+# generated by Slic3r 1.2.9 on Sun Feb 10 11:58:53 2019
+bed_shape = 0x0,280x0,280x280,0x280
+before_layer_gcode = 
+end_gcode = \n;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;\n;; Begin LulzBot Mini HIPS end G-code ;;\n;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;\n\n; Ensure moves are complete\nM400                                 ; Pause processing until moves complete\n\n; Begin cooling\nM104 S0                              ; Set hotend temperature without waiting\nM140 S0                              ; Set bed temperature without waiting\nM107                                 ; Turn off the print cooling fan\n\n; Move to cooling position and retract filament\nG92 E5                               ; Set extruder position for retraction\nG1 X5 Y5 Z160 E0 F10000              ; Move bed and nozzle and retract filament\nM190 R60                             ; Wait for bed to cool\n\n; Move to print removal position\nM140 S0                              ; Set bed temperature without waiting\nG1 X145 Y190 Z160 F10000             ; Move bed forward and toolhead right\n\n; Idle\nM84                                  ; Turn off stepper motors\nG90                                  ; Set absolute positioning mode\n\n;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;\n;; End LulzBot Mini HIPS end G-code ;;\n;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;\n
+extruder_offset = 0x0
+gcode_flavor = reprap
+layer_gcode = 
+nozzle_diameter = 0.5
+octoprint_apikey = 
+octoprint_host = 
+pressure_advance = 0
+retract_before_travel = 2
+retract_layer_change = 1
+retract_length = 1
+retract_length_toolchange = 10
+retract_lift = 0.2
+retract_restart_extra = 0
+retract_restart_extra_toolchange = 0
+retract_speed = 40
+start_gcode = \n; Input file name: [input_filename]\n; Printer preset: [printer_preset]\n; Filament preset: [filament_preset]\n; Print preset: [print_preset]\n\n;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;\n;; Begin LulzBot Mini HIPS start G-code ;;\n;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;\n\n; Set units, positioning modes, and extruder origin\nG21                                  ; Set units to millimeters\nG90                                  ; Set absolute positioning mode\nM82                                  ; Set E absolute mode (override G91)\nG92 E0                               ; Set extruder position to 0 (origin)\n\n; Begin heating hotend to HIPS retraction temperature\nM107                                 ; Turn off the print cooling fan\nM104 S150                            ; Set hotend temperature without waiting\nM140 S[first_layer_bed_temperature]  ; Set bed temperature without waiting\n\n; While waiting for the hotend to heat, auto-home the axes\nG28                                  ; Auto-home all axes\nM109                                 ; Wait for hotend temperature\n\n; Retract filament before wiping\nG1 Z150 E-30 F75                     ; Slowly lower Z and retract filament\n\n; Begin heating hotend to HIPS wiping temperature\nM104 S170                            ; Set hotend temperature without waiting\n\n; While waiting for the hotend to heat, position the nozzle over the wiping pad\nG1 X45 Y174 Z10 F11520               ; Move nozzle to just over wiping pad\nM109                                 ; Wait for hotend temperature\n\n; Wipe the nozzle\nG1           Z-0.5 F4000             ; Plunge nozzle into wiping pad\nG1 X55  Y172       F4000             ; Wipe\nG1 X45  Y174 Z0    F4000             ; Wipe\nG1 X55  Y172       F4000             ; Wipe\nG1 X45  Y174       F4000             ; Wipe\nG1 X55  Y172       F4000             ; Wipe\nG1 X45  Y174       F4000             ; Wipe\nG1 X55  Y172       F4000             ; Wipe\nG1 X60  Y174       F4000             ; Wipe\nG1 X80  Y172       F4000             ; Wipe\nG1 X60  Y174       F4000             ; Wipe\nG1 X80  Y172       F4000             ; Wipe\nG1 X60  Y174       F4000             ; Wipe\nG1 X90  Y172       F4000             ; Wipe\nG1 X80  Y174       F4000             ; Wipe\nG1 X100 Y172       F4000             ; Wipe\nG1 X80  Y174       F4000             ; Wipe\nG1 X100 Y172       F4000             ; Wipe\nG1 X80  Y174       F4000             ; Wipe\nG1 X100 Y172       F4000             ; Wipe\nG1 X110 Y174       F4000             ; Wipe\nG1 X100 Y172       F4000             ; Wipe\nG1 X110 Y174       F4000             ; Wipe\nG1 X100 Y172       F4000             ; Wipe\nG1 X110 Y174       F4000             ; Wipe\nG1 X115 Y172 Z-0.5 F1000             ; Wipe slower, bury nozzle in cleanish area\nG1 Z10                               ; Lift out of wiping pad\n\n; Begin heating hotend to HIPS probing temperature\nM104 S170                            ; Set hotend temperature without waiting\n\n; While waiting for the hotend to heat, auto-home X and Y\nG28 X0 Y0                            ; Auto-home X and Y\nM109                                 ; Wait for hotend temperature\n\n; Probe the bed and enable bed leveling compensation\nM204 S300                            ; Set acceleration for probing moves\nG29                                  ; Probe the bed\nM204 S2000                           ; Set acceleration back to normal\nG1 X5 F5000                          ; Move away from X endstop\nG1 Z10 F5000                         ; Lift off the bed-leveling washer\n\n; Begin heating hotend to first layer temperature\nM104 S[first_layer_temperature]      ; Set hotend temperature without waiting\n\n; While waiting for the hotend to heat, position the nozzle and pause\nG1 X5 Y15 F5000                      ; Move near front left corner\nG4 S1                                ; Dwell/pause command queue for 1 second\nM400                                 ; Pause processing until moves complete\n\n; Ensure the hotend and bed are at the first layer temperatures\nM109                                 ; Wait for hotend temperature\nM190                                 ; Wait for bed temperature\n\n; Extrude filament back into the nozzle\nG1 Z2 E0 F75                         ; Slowly raise nozzle and extrude filamant\n\n;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;\n;; End LulzBot Mini HIPS start G-code ;;\n;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;\n
+toolchange_gcode = 
+use_firmware_retraction = 0
+use_relative_e_distances = 0
+use_volumetric_e = 0
+vibration_limit = 0
+wipe = 0
+z_offset = 0