TAZ 6: Update G-code in config files

1 files changed, 1 insertions, 1 deletions

diff --git a/.Slic3r/printer/LulzBot TAZ 6, Single Extruder v2.1, eSUN PLA.ini b/.Slic3r/printer/LulzBot TAZ 6, Single Extruder v2.1, eSUN PLA.ini
index f41743e..6199d4d 100644
--- a/.Slic3r/printer/LulzBot TAZ 6, Single Extruder v2.1, eSUN PLA.ini
+++ b/.Slic3r/printer/LulzBot TAZ 6, Single Extruder v2.1, eSUN PLA.ini
@@ -17,7 +17,7 @@ retract_lift = 0
 retract_restart_extra = 0
 retract_restart_extra_toolchange = 0
 retract_speed = 60
-start_gcode = \n; Input file name: [input_filename]\n; Printer preset: [printer_preset]\n; Filament preset: [filament_preset]\n; Print preset: [print_preset]\n\n;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;\n;; Begin LulzBot TAZ 6 Single Extruder v2.1 start G-code ;;\n;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;\n\n;\n; Initialization, homing, and retraction\n;\n\n; Set units, positioning modes, and extruder origin\nM73 P0                               ; Set LCD print progress to 0%\nM75                                  ; Start print job timer\nG26                                  ; Clear any "PROBE FAIL" (needed? see T372)\nG90                                  ; Set absolute positioning mode\nM204 S500                            ; Set acceleration\nM82                                  ; Set E absolute mode (override G91)\nG92 E0                               ; Set extruder position to 0 (origin)\nM420 S0                              ; Disable bed leveling with previous matrix\n\n; Begin heating hotend to retraction temperature\nM107                                 ; Turn off the print cooling fan\nM104 S140       ; Set hotend temperature without waiting\nM140 S[first_layer_bed_temperature]  ; Set bed temperature without waiting\n\n; While waiting for the hotend to heat, auto-home the axes\nM117 Homing all axes...\nG28                                  ; Auto-home all axes\nM109 R140       ; Wait for hotend temperature\n\n; Retract filament and move Y toward wiping pad (Z_SAFE_HOMING_Y_POINT - 30 mm)\nM117 Retracting...\nG1 Y228 E-30 F100                    ; Retract and move toward wiping pad\n\n;\n; Wiping\n;\n\n; Begin heating hotend to wiping temperature\nM104 S140           ; Set hotend temperature without waiting\nM400                                 ; Don't show status until retracted\n\n; While waiting for the hotend to heat, position the nozzle over the wiping pad\nM117 Moving to wipe...\nG1 X-15 Y100 F3000                   ; Move nozzle over wiping pad\nM109 R140           ; Wait for hotend temperature\n\n; Wipe the nozzle\nM117 Wiping nozzle...\nG1           Z1   F3000              ; Push nozzle into wiping pad\nG1 X-17 Y95       F1000\nG1 X-17 Y90       F1000\nG1 X-17 Y85       F1000\nG1 X-15 Y90       F1000\nG1 X-17 Y80       F1000\nG1 X-15 Y95       F1000\nG1 X-17 Y75       F2000\nG1 X-15 Y65       F2000\nG1 X-17 Y70       F2000\nG1 X-15 Y60       F2000\nG1 X-17 Y55       F2000\nG1 X-15 Y50       F2000\nG1 X-17 Y40       F2000\nG1 X-15 Y45       F2000\nG1 X-17 Y35       F2000\nG1 X-15 Y40       F2000\nG1 X-17 Y70       F2000\nG1 X-15 Y30  Z2   F2000\nG1 X-17 Y35       F2000\nG1 X-15 Y25       F2000\nG1 X-17 Y30       F2000\nG1 X-15 Y25  Z1.5 F1000\nG1 X-17 Y23       F1000\nG1          Z10   F1000              ; Lift out of wiping pad\nM400                                 ; Don't heat or show status until wiped\n\n;\n; Probing\n;\n\n; Begin heating hotend to probing temperature\nM104 S140          ; Set hotend temperature without waiting\n\n; While waiting for the hotend to heat, move over first probe washer\nM117 Moving to probe...\nG1 X-9 Y-9                           ; Move over rear left bed-leveling washer\nM400                                 ; Don't show status until moved\nM109 R140          ; Wait for hotend temperature\n\n; Probe the bed and enable bed-leveling compensation\nM117 Probing bed...\nM204 S100                            ; Set acceleration for probing moves\nG29                                  ; Probe the bed\nM204 S500                            ; Set acceleration back to normal\nM420 S1                              ; Enable bed leveling with new matrix\nG1 Z10 F5000                         ; Lift off the bed-leveling washer\n\n;\n; Printing\n;\n\n; Begin heating hotend to first layer temperature\nM104 S[first_layer_temperature]      ; Set hotend temperature without waiting\nM400                                 ; Don't show status until done probing\n\n; While waiting for the hotend to heat, position the nozzle and pause\nM117 Moving off probe...\nG1 X0 Y0 Z15 F5000                   ; Move above and away from last washer\nM400                                 ; Don't show status until centered\n\n; Ensure the hotend and bed are at the first layer temperatures\nM109 R[first_layer_temperature]      ; Wait for hotend temperature\nM190 S[first_layer_bed_temperature]  ; Wait for bed temperature\n\n; Extrude filament back into the nozzle\nM117 Priming nozzle...\nG1 Z2 E0 F75                         ; Slowly extrude filament back into nozzle\nM400                                 ; Don't show status until primed\nM117 Printing...\n\n;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;\n;; End LulzBot TAZ 6 Single Extruder v2.1 start G-code ;;\n;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;\n
+start_gcode = \n; Input file name: [input_filename]\n; Printer preset: [printer_preset]\n; Filament preset: [filament_preset]\n; Print preset: [print_preset]\n\n;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;\n;; Begin LulzBot TAZ 6 Single Extruder v2.1 start G-code ;;\n;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;\n\n;\n; Initialization, homing, and retraction\n;\n\n; Set units, positioning modes, and extruder origin\nM73 P0                               ; Set LCD print progress to 0%\nM75                                  ; Start print job timer\nG26                                  ; Clear any "PROBE FAIL" (needed? see T372)\nG90                                  ; Set absolute positioning mode\nM204 S500                            ; Set acceleration\nM82                                  ; Set E absolute mode (override G91)\nG92 E0                               ; Set extruder position to 0 (origin)\nM420 S0                              ; Disable bed leveling with previous matrix\n\n; Begin heating hotend to retraction temperature\nM107                                 ; Turn off the print cooling fan\nM104 S140       ; Set hotend temperature without waiting\nM140 S[first_layer_bed_temperature]  ; Set bed temperature without waiting\n\n; While waiting for the hotend to heat, auto-home the axes\nM117 Homing all axes...\nG28                                  ; Auto-home all axes\nM109 R140       ; Wait for hotend temperature\n\n; Retract filament and move Y toward wiping pad (Z_SAFE_HOMING_Y_POINT - 30 mm)\nM117 Retracting...\nG1 Y228 E-30 F100                    ; Retract and move toward wiping pad\n\n;\n; Wiping\n;\n\n; Begin heating hotend to wiping temperature\nM104 S140           ; Set hotend temperature without waiting\nM400                                 ; Don't show status until retracted\n\n; While waiting for the hotend to heat, position the nozzle over the wiping pad\nM117 Moving to wipe...\nG1 X-15 Y100 F3000                   ; Move nozzle over wiping pad\nM109 R140           ; Wait for hotend temperature\n\n; Wipe the nozzle\nM117 Wiping nozzle...\nG1           Z1   F3000              ; Push nozzle into wiping pad\nG1 X-17 Y95       F1000\nG1 X-17 Y90       F1000\nG1 X-17 Y85       F1000\nG1 X-15 Y90       F1000\nG1 X-17 Y80       F1000\nG1 X-15 Y95       F1000\nG1 X-17 Y75       F2000\nG1 X-15 Y65       F2000\nG1 X-17 Y70       F2000\nG1 X-15 Y60       F2000\nG1 X-17 Y55       F2000\nG1 X-15 Y50       F2000\nG1 X-17 Y40       F2000\nG1 X-15 Y45       F2000\nG1 X-17 Y35       F2000\nG1 X-15 Y40       F2000\nG1 X-17 Y70       F2000\nG1 X-15 Y30  Z2   F2000\nG1 X-17 Y35       F2000\nG1 X-15 Y25       F2000\nG1 X-17 Y30       F2000\nG1 X-15 Y25  Z1.5 F1000\nG1 X-17 Y23       F1000\nG1          Z10   F1000              ; Lift out of wiping pad\nM400                                 ; Don't heat or show status until wiped\n\n;\n; Probing\n;\n\n; Begin heating hotend to probing temperature\nM104 S140          ; Set hotend temperature without waiting\n\n; While waiting, move to (LEFT_PROBE_BED_POSITION, FRONT_PROBE_BED_POSITION)\nM117 Moving to probe...\nG1 X-9 Y-9                           ; Move over front left bed-leveling washer\nM400                                 ; Don't show status until moved\nM109 R140          ; Wait for hotend temperature\n\n; Probe the bed and enable bed-leveling compensation\nM117 Probing bed...\nM204 S100                            ; Set acceleration for probing moves\nG29                                  ; Probe the bed\nM204 S500                            ; Set acceleration back to normal\nM420 S1                              ; Enable bed leveling with new matrix\nG1 Z10 F5000                         ; Lift off the bed-leveling washer\n\n;\n; Printing\n;\n\n; Begin heating hotend to first layer temperature\nM104 S[first_layer_temperature]      ; Set hotend temperature without waiting\nM400                                 ; Don't show status until done probing\n\n; While waiting for the hotend to heat, position the nozzle and pause\nM117 Moving off probe...\nG1 X0 Y0 Z15 F5000                   ; Move above and away from last washer\nM400                                 ; Don't show status until moved\n\n; Ensure the hotend and bed are at the first layer temperatures\nM109 R[first_layer_temperature]      ; Wait for hotend temperature\nM190 S[first_layer_bed_temperature]  ; Wait for bed temperature\n\n; Extrude filament back into the nozzle\nM117 Priming nozzle...\nG1 Z2 E0 F75                         ; Slowly extrude filament back into nozzle\nM400                                 ; Don't show status until primed\nM117 Printing...\n\n;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;\n;; End LulzBot TAZ 6 Single Extruder v2.1 start G-code ;;\n;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;\n
 toolchange_gcode = 
 use_firmware_retraction = 0
 use_relative_e_distances = 0