The marked screws are underneath those stickers (marked in those 3 locations at the bottom of the LCD assembly):
Now gently pry off the bottom part of the front bezel, and the bluetooth module is on the left (easily removable):
Or go back to main index
Most people think of security on the software side: the hardware is important aswell. Hardware security is useful in particular to journalists (or activists in a given movement) who need absolute privacy in their work. It is also generally useful to all those that believe security and privacy are inalienable rights. Security starts with the hardware; crypto and network security come later.
Paradoxically, going this far to increase your security also makes you a bigger target. At the same time, it protects you in the case that someone does attack your machine. This paradox only exists while few people take adequate steps to protect yourself: it is your duty to protect yourself, not only for your benefit but to make strong security normal so that those who do need protection (and claim it) are a smaller target against the masses.
Even if there are levels of security beyond your ability (technically, financially and so on) doing at least something (what you are able to do) is extremely important. If you use the internet and your computer without protection, attacking you is cheap (some say it is only a few US cents). If everyone (majority of people) use strong security by default, it makes attacks more costly and time consuming; in effect, making them disappear.
This tutorial deals with reducing the number of devices that have direct memory access that could communicate with inputs/outputs that could be used to remotely command the machine (or leak data).
Firstly remove the bluetooth (if your X60 has this):
The marked screws are underneath those stickers (marked in those 3 locations at the bottom of the LCD assembly):
Now gently pry off the bottom part of the front bezel, and the bluetooth module is on the left (easily removable):
If your model was WWAN, remove the simcard (check anyway):
Uncover those 2 screws at the bottom:
SIM card (not present in the picture) is in the marked location:
Replacement: USB dongle.
Now get into the motherboard.
Remove those screws:
Push the keyboard forward (carefully):
Lift the keyboard up and disconnect it from the board:
Grab the right-hand side of the chassis and force it off (gently) and pry up the rest of the chassis:
You should now have this:
The following is a summary of what you will remove (already done to this machine):
Note: the blue lines represent antenna cables and modem cables. You don't need to remove these, but you can if you want
(to make it tidier after removing other parts). I removed the antenna wires, the modem jack, the modem cable and
also (on another model) a device inside the part where the wwan antenna goes (wasn't sure what it was, but I knew it wasn't needed). This is optional
Remove the microphone (can desolder it, but you can also easily pull it off with you hands). Already removed here:
Rationale:
Another reason to remove the microphone: If your computer gets[1] compromised, it can
record what you say, and use it to receive data from nearby devices if
they're compromised too. Also, we do not know what the built-in microcode (in the CPU) is doing; it could theoretically
be programmed to accept remote commands from some speaker somewhere (remote security hole). In other words,
the machine could already be compromised from the factory.
Remove the modem:
(useless, obsolete device)
Remove the speaker:
Reason: combined with the microphone issue, this could be used to leak data.
If your computer gets[1] compromised, it can be used to
transmit data to nearby compromised devices. It's unknown if it can be
turned into a microphone[2].
Replacement: headphones/speakers (line-out) or external DAC (USB).
Remove the wlan (also remove wwan if you have it):
Reason: has direct (and very fast) memory access, and could (theoretically) leak data over a side-channel.
Wifi: The ath5k/ath9k cards might not have firmware at all. They might safe but could have
access to the computer's RAM trough DMA. If people have an intel
card(most X60's come with Intel wifi by default, until you change it),then that card runs
a non-free firwamre and has access to the computer's RAM trough DMA! So
it's risk-level is very high.
Wwan (3d modem): They run proprietary software and have access to the
computer's RAM! So it's like AMT but over the GSM network which is
probably even worse.
Replacement: external USB wifi dongle. (or USB wwan/3g dongle; note, this has all the same privacy issues as mobile phones. wwan not recommended).
Go to http://media.ccc.de/browse/congress/2013/30C3_-_5529_-_en_-_saal_2_-_201312271830_-_hardening_hardware_and_choosing_a_goodbios_-_peter_stuge.html or directly to the video: http://mirror.netcologne.de/CCC/congress/2013/webm/30c3-5529-en-Hardening_hardware_and_choosing_a_goodBIOS_webm.webm.
A lot of this tutorial is based on that video. Look towards the second half of the video to see how to do the above.
EC: Cannot be removed but can be mitigated: it contains non-free non-loadable code, but it has no access to the computer's RAM. It has access to the on-switch of the wifi, bluetooth, modem and some other power management features. The issue is that it has access to the keyboard, however if the software security howto (not yet written) is followed correctly, it won't be able to leak data to a local attacker. It has no network access but it may still be able to leak data remotely, but that requires someone to be nearby to recover the data with the help of an SDR and some directional antennas[3].
Explain that black hats, TAO, and so on might use a 0day to get in, and explain that in this case it mitigates what the attacker can do. Also the TAO do some evaluation before launching an attack: they take the probability of beeing caught into account, along with the kind of target. A 0day costs a lot of money, I heard that it was from 100000$ to 400000$, some other websites had prices 10 times lower but that but it was probably a typo. So if people increase their security it makes it more risky and more costly to attack people.
It's possible to turn headphones into a microphone, you could try yourself, however they don't record loud at all. Also intel cards have the capability to change a connector's function, for instance the microphone jack can now become a headphone plug, that's called retasking. There is some support for it in GNU/Linux but it's not very well known.
30c3-5356-en-Firmware_Fat_Camp_webm.webm from the 30th CCC. While their demo is experimental(their hardware also got damaged during the transport), the spies probably already have that since a long time. http://berlin.ftp.media.ccc.de/congress/2013/webm/30c3-5356-en-Firmware_Fat_Camp_webm.webm
Copyright © 2014 Francis Rowe, All Rights Reserved.
See ../license.html for license conditions.