USB


coreboot-4.0-7551-ge420139-dirty Wed Dec 10 16:34:05 GMT 2014 starting...
running main(bist = 0)
WARNING: Ignoring S4-assertion-width violation.
Stepping B3
2 CPU cores
AMT enabled
capable of DDR2 of 800 MHz or lower
VT-d enabled
GMCH: GS45, using high performance mode by default
TXT enabled
Render frequency: 533 MHz
IGD enabled
PCIe-to-GMCH enabled
GMCH supports DDR3 with 1067 MT or less
GMCH supports FSB with up to 1067 MHz
SMBus controller enabled.
0:50:b
2:51:b
DDR mask 5, DDR 3
Bank 0 populated:
 Raw card type:    F
 Row addr bits:   14
 Col addr bits:   10
 byte width:       1
 page size:     1024
 banks:            8
 ranks:            2
 tAAmin:    105
 tCKmin:     15
  Max clock: 533 MHz
 CAS:       0x01c0
Bank 1 populated:
 Raw card type:    B
 Row addr bits:   15
 Col addr bits:   10
 byte width:       1
 page size:     1024
 banks:            8
 ranks:            1
 tAAmin:    105
 tCKmin:     12
  Max clock: 666 MHz
 CAS:       0x07e0
Trying CAS 7, tCK 15.
Found compatible clock / CAS pair: 533 / 7.
Timing values:
 tCLK:   15
 tRAS:   20
 tRP:     7
 tRCD:    7
 tRFC:  104
 tWR:     8
 tRD:    11
 tRRD:    4
 tFAW:   20
 tWL:     6
Changing memory frequency: old 3, new 6.
Setting IGD memory frequencies for VCO #1.
Memory configured in dual-channel assymetric mode.
Memory map:
TOM   =   384MB
TOLUD =   384MB
TOUUD =   384MB
REMAP:   base  = 65535MB
         limit =     0MB
usedMEsize: 0MB
Performing Jedec initialization at address 0x00000000.
Performing Jedec initialization at address 0x08000000.
Performing Jedec initialization at address 0x10000000.
Final timings for group 0 on channel 0: 6.1.0.3.2
Final timings for group 1 on channel 0: 6.0.2.6.3
Final timings for group 2 on channel 0: 6.1.2.0.1
Final timings for group 3 on channel 0: 6.1.0.7.3
Timing under-/overflow during receive-enable calibration.