This section relates to building libreboot from source, and working with the git repository.
Before doing anything, you need the dependencies first. This is true if you want to build libreboot from source, with either libreboot_src.tar.xz or git. If you are using libreboot_util.tar.xz (binary archive) then you can ignore this, because ROM images and statically compiled executables for the utilities are included.
For Trisquel 7, you can run the following command:
$ sudo ./resources/scripts/dependencies/trisquel7dependencies
For other GNU/Linux distributions, you can adapt the Trisquel 7 script for your needs.
If you downloaded libreboot from git, then there are some steps to download and patch the source code for all relevant dependencies. The archive in the git repository used to be available as a tarball called 'libreboot_meta.tar.gz'. It contains 'metadata' (scripts) which define how the source was created (where it came from).
You can use the scripts included to download everything.
First, install the build dependencies.
Since libreboot makes extensive use of git, you need to configure git properly. If you have not yet configured
git, then the minimum requirement is:
$ git config --global user.name "Your Name"
$ git config --global user.email your@emailaddress.com
This is what will also appear in git logs if you ever commit your own changes to a given repository. For
more information, see http://git-scm.com/doc.
Another nice config for you (optional, but recommended):
$ git config --global core.editor nano
$ git config --global color.status auto
$ git config --global color.branch auto
$ git config --global color.interactive auto
$ git config --global color.diff auto
After that, run the script:
$ ./download everything
What this did was download everything (grub, coreboot, memtest86+, bucts, flashrom) at the versions last tested for this release, and patch them. Read the script in a text editor to learn more.
To build the ROM images, see #build.
This is for Lenovo BIOS users on the ThinkPad X60/X60S, X60 Tablet and T60. If you have coreboot or libreboot running already, ignore this.
Bucts is needed when flashing in software the X60/X60S/X60T/T60 ROM while Lenovo BIOS is running; external flashing will be safe regardless. Each ROM contains identical data inside the two final 64K region in the file. This corresponds to the final two 64K regions in the flash chip. Lenovo BIOS will prevent you from writing the final one, so running "bucts 1" will set the machine to boot from the other block instead (which is writeable along with everything beneath it when using a patched flashrom. see #build_flashrom). After shutting down and booting up after the first flash, the final 64K block is writeable so you flash the ROM again with an unpatched flashrom and run "bucts 0" to make the machine boot from the normal (highest) block again.
BUC.TS utility is included in libreboot_src.tar.xz and libreboot_util.tar.xz.
If you downloaded from git, follow #build_meta before you proceed.
"BUC" means "Backup Control" (it's a register) and "TS" means "Top Swap" (it's a status bit). Hence "bucts" (BUC.TS). TS 1 and TS 0 corresponds to bucts 1 and bucts 0.
If you have the binary release archive, you'll find executables under ./bucts/. Otherwise if you need to build from source, continue reading.
First, install the build dependencies.
To build bucts, do this in the main directory:
$ ./build module bucts
To statically compile it, do this:
$ ./build module bucts static
The "builddeps" script in libreboot_src also makes use of builddeps-bucts.
Flashrom is the utility for flashing/dumping ROM images. This is what you will use to install libreboot.
Flashrom source code is included in libreboot_src.tar.xz and libreboot_util.tar.xz.
If you downloaded from git, follow #build_meta before you proceed.
If you are using the binary release archive, then there are already binaries included under ./flashrom/. The flashing scripts will try to choose the correct one for you. Otherwise if you wish to re-build flashrom from source, continue reading.
First, install the build dependencies.
To build it, do the following in the main directory:
$ ./build module flashrom
To statically compile it, do the following in the main directory:
$ ./build module flashrom static
After you've done that, under ./flashrom/ you will find the following executables:
The "builddeps" script in libreboot_src also makes use of builddeps-flashrom.
Before building a ROM in libreboot (or coreboot, for that matter), you need to configure it.
This is done using the following inside the source tree:
$ cd coreboot/
$ make menuconfig
If you've already built a kernel before, you know how to use this interface.
Configurations are then saved as files called ".config". Copies of each configuration used for each machine type by the libreboot build scripts are stored in resources/libreboot/config/
There is certain information that can be useful to enter in particular:
This information can be obtained using:
$ sudo dmidecode
# dmidecode
Specifically, it's good practise to enter the same information for libreboot that you found when running this with the original BIOS or firmware. libreboot has already done this for you. This information is for reference, in the hope that it will be useful.
Now go back into Devices:
The resulting .config file was saved as resources/libreboot/config/x60/config and is used by the build scripts for this machine.
This configuration is used on all variants: X60, X60S and X60 Tablet.
Go back into Devices:
The resulting .config file was saved as resources/libreboot/config/t60/config and is used by the build scripts for this machine.
It is believed that the motherboards on 14.1" and 15.1" T60s are the same, so the same configuration is used on both the 14.1" and 15.1" T60s.
These are saved as two configs, because there are 2 size flash chips: 4MB or 8MB.
Go back and disable option ROMs:
The resulting .config file was saved as resources/libreboot/config/x200_8mb/config and resources/libreboot/config/x200_4mb/config and is used by the build scripts for this machine.
These are saved as two configs, because there are 2 size flash chips: 4MB or 8MB.
Go back and disable option ROMs:
The resulting .config file was saved as resources/libreboot/config/r400_8mb/config and resources/libreboot/config/r400_4mb/config and is used by the build scripts for this machine.
Go back and disable option ROMs:
The resulting .config file was saved as resources/libreboot/config/macbook21/config and is used by the build scripts for this machine. This config is also used for the MacBook1,1.
Go back and disable option ROMs:
The resulting .config file was saved as resources/libreboot/config/qemu_i440fx_piix4/config and is used by the build scripts for this machine.
Go back and disable option ROMs:
The resulting .config file was saved as resources/libreboot/config/qemu_q35_ich9/config and is used by the build scripts for this machine.
You don't need to do much, as there are scripts already written for you that can build everything automatically.
You can build libreboot from source on a 32-bit (i686) or 64-bit (x86_64) system. Recommended (if possible): x86_64. On a ThinkPad T60, you can replace the CPU (Core 2 Duo T5600, T7200 or T7600. T5600 recommended) for 64-bit support. On an X60s, you can replace the board with one that has a Core 2 Duo L7400 (you could also use an X60 Tablet board with the same CPU). On an X60, you can replace the board with one that has a Core 2 Duo T5600 or T7200 (T5600 is recommended). All MacBook2,1 laptops are 64-bit, as are all ThinkPad X200, X200S, X200 Tablet and R400 laptops. Warning: MacBook1,1 laptops are all 32-bit only.
First, install the build dependencies.
If you downloaded libreboot from git, refer to #build_meta.
Build all of the components used in libreboot:
$ ./build module all
After that, build the ROM images:
$ ./build roms withgrub
To clean (reverse) everything, do the following:
$ ./build clean all
The ROM images will be stored under bin/.
Do the following:
$ ./build release archives
If you are building on an i686 host, this will include statically linked 32-bit binaries in the binary release archive that you created, for: nvramtool, cbfstool, bucts, flashrom, ich9deblob, cbmem.
If you are building on an x86_64 host, this will include statically linked 32- and 64-bit binaries for cbmem, ich9deblob, cbfstool and nvramtool, while flashrom and bucts will be included only as 64-bit statically linked binaries. To include a statically linked flashrom and bucts for i686, you will need to build them on a chroot, a virtual machine or a real 32-bit system. You can find the build dependencies for these packages listed in deps-*
armv7l binaries (tested on a BeagleBone Black) are also included in libreboot_util, for:
If you are building 32-bit binaries on a live system or chroot (for flashrom/bucts), you can use the following to statically link them:
$ ./build module flashrom static
$ ./build module bucts static
The same conditions as above apply for ARM (except, building bucts on ARM is pointless, and for flashrom you only need the normal executable since the lenovobios_sst and _macronix executables are meant to run on an X60/T60 while lenovo bios is present, working around the security restrictions).
The command that you used for generating the release archives will also run the following command:
$ ./build external source
The archive tobuild.tar.xz will have been created, containing bucts, flashrom and all other required
resources for building them.
You'll find that the files libreboot_util.tar.xz and libreboot_src.tar.xz have been created.
Copyright © 2014, 2015 Francis Rowe <info@gluglug.org.uk>
This document is released under the Creative Commons Attribution-ShareAlike 4.0 International Public License and all future versions.
A copy of the license can be found at ../license.txt.
This document is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See ../license.txt for more information.