From b3942467fea2fe80630bc9096ae7f4d089f81a43 Mon Sep 17 00:00:00 2001 From: Francis Rowe Date: Sun, 15 Feb 2015 03:16:54 -0500 Subject: Documentation: optimize all images (reduce file sizes) --- (limited to 'docs/install/bbb_setup.html') diff --git a/docs/install/bbb_setup.html b/docs/install/bbb_setup.html index 70881a2..c950201 100644 --- a/docs/install/bbb_setup.html +++ b/docs/install/bbb_setup.html @@ -131,16 +131,6 @@ # screen /dev/ttyACM0 115200

- Since it's a bare board (no case) and you are also touching inside your X200, you should be earthed/grounded. - images/x200/strap.jpg shows how I earthed myself. This is to prevent you - from causing any ESD damage. The surface that you place components on should also be earthed/grounded. - (for this, I used a shielded ESD bag with a wire, copper exposed, attached from the bag to the exposed metal - part on a radiator, which was earthed - not professional, but it should work. see images/x200/mat.jpg). - Most people ignore this advice and don't ground/earth themselves, at their own risk. You should also store the BBB - in a shielded anti-static bag when you are finished with it. - (the principles above apply to any computer components, since they are extremely sensitive te ESD). -

-

These instructions may or may not work for you. They are simply the steps that this author took.

-- cgit v0.9.1