From 620c2ce2355f7de772d3604b1bd6f6296da02582 Mon Sep 17 00:00:00 2001 From: Francis Rowe Date: Sat, 16 May 2015 08:50:49 -0400 Subject: docs/install/bbb_setup.html: re-add red colour reference for 5V Colourblind people still have pinouts to fall back on, while non-colourblind people will have an easier time just knowing "avoid red". Everyone wins. --- (limited to 'docs/install/bbb_setup.html') diff --git a/docs/install/bbb_setup.html b/docs/install/bbb_setup.html index 4aaa4f9..735812f 100644 --- a/docs/install/bbb_setup.html +++ b/docs/install/bbb_setup.html @@ -104,7 +104,7 @@

DO **NOT** use pin 4, 6, do **NOT** use pin 19 or 20 (on a 20-pin ATX PSU), and - DO **NOT** use pin 21, 22 or 23 (on a 24-pin ATX PSU). These are 5V, and they **WILL** + DO **NOT** use pin 21, 22 or 23 (on a 24-pin ATX PSU). Those wires (the red ones) are 5V, and they **WILL** kill your flash chip. ***NEVER*** supply more than 3.3V to your flash chip. (that is, if it's a 3.3V flash chip. 5V and 1.8V SPI flash chips do exist, but they are rare. always check what voltage your chip takes. most take 3.3V) -- cgit v0.9.1