From d1bb5d6fcc75f07ca6a58b5536906980aff9d253 Mon Sep 17 00:00:00 2001
From: Francis Rowe <info@gluglug.org.uk>
Date: Sat, 18 Jul 2015 19:31:16 -0400
Subject: New board: ThinkPad R500 (experimental)

The ich9deblob and ich9gen utilities were modified, so that they
support reading and/or writing descriptor images where the GbE
region is not defined. These utilities were also re-factored
and tidied up a bit.

A quick was noticed during the course of this work, in that
Compenent 1 Density was being set to 8MiB constantly, even
on systems with 4MiB flash chips. Component 2 Density was
set statically to 2MiB. ich9gen now sets both to 4MiB or 8MiB,
depending on whether building the descriptor for a 4MiB or
8MiB ROM image.

There are still some ACPI bugs (see docs/hcl/r500.html), which
will have to be fixed upstream. TODO: get hw reg dumps from
a factory R500, and compare with the X200 or T400 dumps.
---
(limited to 'docs/hcl/r500_dumps/msrtool.log')

diff --git a/docs/hcl/r500_dumps/msrtool.log b/docs/hcl/r500_dumps/msrtool.log
new file mode 100644
index 0000000..a6d485c
--- /dev/null
+++ b/docs/hcl/r500_dumps/msrtool.log
@@ -0,0 +1,25 @@
+syntax: msrtool [-hvqrkl] [-c cpu] [-m system] [-t target ...]
+	 [-i addr=hi[:]lo] | [-s file] | [-d [:]file] | addr...
+  -h	 show this help text
+  -v	 be verbose
+  -q	 be quiet (overrides -v)
+  -r	 include [Reserved] values
+  -k	 list all known systems and targets
+  -l	 list MSRs and bit fields for current target(s) (-kl for ALL targets!)
+  -c	 access MSRs on the specified CPU, default=0
+  -m	 force a system, e.g: -m linux
+  -t	 force a target, can be used multiple times, e.g: -t geodelx -t cs5536
+  -i	 immediate mode
+	 decode hex addr=hi:lo for the target without reading hw value
+	 e.g: -i 4c00000f=f2f100ff56960004
+  -s	 stream mode
+	 read one MSR address per line and append current hw value to the line
+	 use the filename - for stdin/stdout
+	 using -l -s ignores input and will output all MSRs with values
+  -d	 diff mode
+	 read one address and value per line and compare with current hw value,
+	 printing differences to stdout. use the filename - to read from stdin
+	 use :file or :- to reverse diff, normally hw values are considered new
+  addr.. direct mode, read and decode values for the given MSR address(es)
+
+No mode or address(es) specified!
--
cgit v0.9.1