diff options
Diffstat (limited to 'resources/flashrom/patch/flashchips.c')
| -rw-r--r-- | resources/flashrom/patch/flashchips.c | 13500 |
1 files changed, 13500 insertions, 0 deletions
diff --git a/resources/flashrom/patch/flashchips.c b/resources/flashrom/patch/flashchips.c new file mode 100644 index 0000000..bb24bdb --- /dev/null +++ b/resources/flashrom/patch/flashchips.c @@ -0,0 +1,13500 @@ +/* + * This file is part of the flashrom project. + * + * Copyright (C) 2000 Silicon Integrated System Corporation + * Copyright (C) 2004 Tyan Corp + * Copyright (C) 2005-2008 coresystems GmbH <stepan@openbios.org> + * Copyright (C) 2006-2009 Carl-Daniel Hailfinger + * Copyright (C) 2009 Sean Nelson <audiohacked@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include "flash.h" +#include "flashchips.h" +#include "chipdrivers.h" + +/** + * List of supported flash chips. + * + * Please keep the list sorted by vendor name and chip family, so that the output of 'flashrom -L' is roughly + * alphabetically sorted. Within families keep them in order of density. + */ +const struct flashchip flashchips[] = { + + /* + * .vendor = Vendor name + * .name = Chip name + * .bustype = Supported flash bus types (Parallel, LPC...) + * .manufacture_id = Manufacturer chip ID + * .model_id = Model chip ID + * .total_size = Total size in (binary) kbytes + * .page_size = Page or eraseblock(?) size in bytes + * .tested = Test status + * .probe = Probe function + * .probe_timing = Probe function delay + * .block_erasers[] = Array of erase layouts and erase functions + * { + * .eraseblocks[] = Array of { blocksize, blockcount } + * .block_erase = Block erase function + * } + * .printlock = Chip lock status function + * .unlock = Chip unlock function + * .write = Chip write function + * .read = Chip read function + * .voltage = Voltage range in millivolt + */ + + { + .vendor = "AMD", + .name = "Am29F010A/B", + .bustype = BUS_PARALLEL, + .manufacture_id = AMD_ID, + .model_id = AMD_AM29F010B, /* Same as Am29F010A */ + .total_size = 128, + .page_size = 16 * 1024, + .feature_bits = FEATURE_ADDR_2AA | FEATURE_EITHER_RESET, + .tested = TEST_OK_PRE, + .probe = probe_jedec, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {16 * 1024, 8} }, + .block_erase = erase_sector_jedec, + }, { + .eraseblocks = { {128 * 1024, 1} }, + .block_erase = erase_chip_block_jedec, + }, + }, + .write = write_jedec_1, + .read = read_memmapped, + .voltage = {4500, 5500}, + }, + + { + .vendor = "AMD", + .name = "Am29F002(N)BB", + .bustype = BUS_PARALLEL, + .manufacture_id = AMD_ID, + .model_id = AMD_AM29F002BB, + .total_size = 256, + .page_size = 256, + .feature_bits = FEATURE_SHORT_RESET | FEATURE_ADDR_2AA, + .tested = TEST_UNTESTED, + .probe = probe_jedec, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { + {16 * 1024, 1}, + {8 * 1024, 2}, + {32 * 1024, 1}, + {64 * 1024, 3}, + }, + .block_erase = erase_sector_jedec, + }, { + .eraseblocks = { {256 * 1024, 1} }, + .block_erase = erase_chip_block_jedec, + }, + }, + .write = write_jedec_1, + .read = read_memmapped, + .voltage = {4750, 5250}, /* 4.75-5.25V for type -55, others 4.5-5.5V */ + }, + + { + .vendor = "AMD", + .name = "Am29F002(N)BT", + .bustype = BUS_PARALLEL, + .manufacture_id = AMD_ID, + .model_id = AMD_AM29F002BT, + .total_size = 256, + .page_size = 256, + .feature_bits = FEATURE_EITHER_RESET | FEATURE_ADDR_2AA, + .tested = TEST_UNTESTED, + .probe = probe_jedec, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { + {64 * 1024, 3}, + {32 * 1024, 1}, + {8 * 1024, 2}, + {16 * 1024, 1}, + }, + .block_erase = erase_sector_jedec, + }, { + .eraseblocks = { {256 * 1024, 1} }, + .block_erase = erase_chip_block_jedec, + }, + }, + .write = write_jedec_1, + .read = read_memmapped, + .voltage = {4750, 5250}, /* 4.75-5.25V for type -55, others 4.5-5.5V */ + }, + + { + .vendor = "AMD", + .name = "Am29F016D", + .bustype = BUS_PARALLEL, + .manufacture_id = AMD_ID, + .model_id = AMD_AM29F016D, + .total_size = 2 * 1024, + .page_size = 64 * 1024, + .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, + .tested = TEST_UNTESTED, + .probe = probe_jedec, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {64 * 1024, 32} }, + .block_erase = erase_sector_jedec, + }, { + .eraseblocks = { {2048 * 1024, 1} }, + .block_erase = erase_chip_block_jedec, + }, + }, + .write = write_jedec_1, + .read = read_memmapped, + .voltage = {4500, 5500}, + }, + + { + .vendor = "AMD", + .name = "Am29F040B", + .bustype = BUS_PARALLEL, + .manufacture_id = AMD_ID, + .model_id = AMD_AM29F040B, + .total_size = 512, + .page_size = 64 * 1024, + .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, + .tested = TEST_UNTESTED, + .probe = probe_jedec, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {64 * 1024, 8} }, + .block_erase = erase_sector_jedec, + }, { + .eraseblocks = { {512 * 1024, 1} }, + .block_erase = erase_chip_block_jedec, + }, + }, + .write = write_jedec_1, + .read = read_memmapped, + .voltage = {4500, 5500}, + }, + + { + .vendor = "AMD", + .name = "Am29F080B", + .bustype = BUS_PARALLEL, + .manufacture_id = AMD_ID, + .model_id = AMD_AM29F080B, + .total_size = 1024, + .page_size = 64 * 1024, + .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, + .tested = TEST_UNTESTED, + .probe = probe_jedec, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {64 * 1024, 16} }, + .block_erase = erase_sector_jedec, + }, { + .eraseblocks = { {1024 * 1024, 1} }, + .block_erase = erase_chip_block_jedec, + }, + }, + .write = write_jedec_1, + .read = read_memmapped, + .voltage = {4500, 5500}, + }, + + { + .vendor = "AMD", + .name = "Am29LV001BB", + .bustype = BUS_PARALLEL, + .manufacture_id = AMD_ID, + .model_id = AMD_AM29LV001BB, + .total_size = 128, + .page_size = 64 * 1024, /* unused */ + .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, + .tested = TEST_OK_PREW, + .probe = probe_jedec, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { + {8 * 1024, 1}, + {4 * 1024, 2}, + {16 * 1024, 7}, + }, + .block_erase = erase_sector_jedec, + }, { + .eraseblocks = { {128 * 1024, 1} }, + .block_erase = erase_chip_block_jedec, + }, + }, + .write = write_jedec_1, + .read = read_memmapped, + .voltage = {3000, 3600}, /* 3.0-3.6V for type -45R, others 2.7-3.6V */ + }, + + { + .vendor = "AMD", + .name = "Am29LV001BT", + .bustype = BUS_PARALLEL, + .manufacture_id = AMD_ID, + .model_id = AMD_AM29LV001BT, + .total_size = 128, + .page_size = 64 * 1024, /* unused */ + .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, + .tested = TEST_UNTESTED, + .probe = probe_jedec, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { + {16 * 1024, 7}, + {4 * 1024, 2}, + {8 * 1024, 1}, + }, + .block_erase = erase_sector_jedec, + }, { + .eraseblocks = { {128 * 1024, 1} }, + .block_erase = erase_chip_block_jedec, + }, + }, + .write = write_jedec_1, + .read = read_memmapped, + .voltage = {3000, 3600}, /* 3.0-3.6V for type -45R, others 2.7-3.6V */ + }, + + { + .vendor = "AMD", + .name = "Am29LV002BB", + .bustype = BUS_PARALLEL, + .manufacture_id = AMD_ID, + .model_id = AMD_AM29LV002BB, + .total_size = 256, + .page_size = 64 * 1024, /* unused */ + .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, + .tested = TEST_UNTESTED, + .probe = probe_jedec, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { + {16 * 1024, 1}, + {8 * 1024, 2}, + {32 * 1024, 1}, + {64 * 1024, 3}, + }, + .block_erase = erase_sector_jedec, + }, { + .eraseblocks = { {256 * 1024, 1} }, + .block_erase = erase_chip_block_jedec, + }, + }, + .write = write_jedec_1, + .read = read_memmapped, + .voltage = {3000, 3600}, /* 3.0-3.6V for type -55, others 2.7-3.6V */ + }, + + { + .vendor = "AMD", + .name = "Am29LV002BT", + .bustype = BUS_PARALLEL, + .manufacture_id = AMD_ID, + .model_id = AMD_AM29LV002BT, + .total_size = 256, + .page_size = 64 * 1024, /* unused */ + .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, + .tested = TEST_UNTESTED, + .probe = probe_jedec, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { + {64 * 1024, 3}, + {32 * 1024, 1}, + {8 * 1024, 2}, + {16 * 1024, 1}, + }, + .block_erase = erase_sector_jedec, + }, { + .eraseblocks = { {256 * 1024, 1} }, + .block_erase = erase_chip_block_jedec, + }, + }, + .write = write_jedec_1, + .read = read_memmapped, + .voltage = {3000, 3600}, /* 3.0-3.6V for type -55, others 2.7-3.6V */ + }, + + { + .vendor = "AMD", + .name = "Am29LV004BB", + .bustype = BUS_PARALLEL, + .manufacture_id = AMD_ID, + .model_id = AMD_AM29LV004BB, + .total_size = 512, + .page_size = 64 * 1024, /* unused */ + .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, + .tested = TEST_UNTESTED, + .probe = probe_jedec, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { + {16 * 1024, 1}, + {8 * 1024, 2}, + {32 * 1024, 1}, + {64 * 1024, 7}, + }, + .block_erase = erase_sector_jedec, + }, { + .eraseblocks = { {512 * 1024, 1} }, + .block_erase = erase_chip_block_jedec, + }, + }, + .write = write_jedec_1, + .read = read_memmapped, + .voltage = {2700, 3600}, + }, + + { + .vendor = "AMD", + .name = "Am29LV004BT", + .bustype = BUS_PARALLEL, + .manufacture_id = AMD_ID, + .model_id = AMD_AM29LV004BT, + .total_size = 512, + .page_size = 64 * 1024, /* unused */ + .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, + .tested = TEST_UNTESTED, + .probe = probe_jedec, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { + {64 * 1024, 7}, + {32 * 1024, 1}, + {8 * 1024, 2}, + {16 * 1024, 1}, + }, + .block_erase = erase_sector_jedec, + }, { + .eraseblocks = { {512 * 1024, 1} }, + .block_erase = erase_chip_block_jedec, + }, + }, + .write = write_jedec_1, + .read = read_memmapped, + .voltage = {2700, 3600}, + }, + + { + .vendor = "AMD", + .name = "Am29LV008BB", + .bustype = BUS_PARALLEL, + .manufacture_id = AMD_ID, + .model_id = AMD_AM29LV008BB, + .total_size = 1024, + .page_size = 64 * 1024, /* unused */ + .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, + .tested = TEST_OK_PREW, + .probe = probe_jedec, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { + {16 * 1024, 1}, + {8 * 1024, 2}, + {32 * 1024, 1}, + {64 * 1024, 15}, + }, + .block_erase = erase_sector_jedec, + }, { + .eraseblocks = { {1024 * 1024, 1} }, + .block_erase = erase_chip_block_jedec, + }, + }, + .write = write_jedec_1, + .read = read_memmapped, + .voltage = {3000, 3600} /* 3.0-3.6V for type -70R, others 2.7-3.6V */ + }, + + { + .vendor = "AMD", + .name = "Am29LV008BT", + .bustype = BUS_PARALLEL, + .manufacture_id = AMD_ID, + .model_id = AMD_AM29LV008BT, + .total_size = 1024, + .page_size = 64 * 1024, /* unused */ + .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, + .tested = TEST_UNTESTED, + .probe = probe_jedec, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { + {64 * 1024, 15}, + {32 * 1024, 1}, + {8 * 1024, 2}, + {16 * 1024, 1}, + }, + .block_erase = erase_sector_jedec, + }, { + .eraseblocks = { {1024 * 1024, 1} }, + .block_erase = erase_chip_block_jedec, + }, + }, + .write = write_jedec_1, + .read = read_memmapped, + .voltage = {3000, 3600} /* 3.0-3.6V for type -70R, others 2.7-3.6V */ + }, + + { + .vendor = "AMD", + .name = "Am29LV040B", + .bustype = BUS_PARALLEL, + .manufacture_id = AMD_ID, + .model_id = AMD_AM29LV040B, + .total_size = 512, + .page_size = 64 * 1024, + .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, + .tested = TEST_OK_PRE, + .probe = probe_jedec, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {64 * 1024, 8} }, + .block_erase = erase_sector_jedec, + }, { + .eraseblocks = { {512 * 1024, 1} }, + .block_erase = erase_chip_block_jedec, + }, + }, + .write = write_jedec_1, + .read = read_memmapped, + .voltage = {3000, 3600}, /* 3.0-3.6V for type -60R, others 2.7-3.6V*/ + }, + + { + .vendor = "AMD", + .name = "Am29LV081B", + .bustype = BUS_PARALLEL, + .manufacture_id = AMD_ID, + .model_id = AMD_AM29LV080B, + .total_size = 1024, + .page_size = 64 * 1024, + .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, /* datasheet specifies address as don't care */ + .tested = TEST_UNTESTED, + .probe = probe_jedec, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {64 * 1024, 16} }, + .block_erase = erase_sector_jedec, + }, { + .eraseblocks = { {1024 * 1024, 1} }, + .block_erase = erase_chip_block_jedec, + }, + }, + .write = write_jedec_1, + .read = read_memmapped, + .voltage = {3000, 3600}, /* 3.0-3.6V for type -70R, others 2.7-3.6V */ + }, + + { + .vendor = "AMIC", + .name = "A25L05PT", + .bustype = BUS_SPI, + .manufacture_id = AMIC_ID, + .model_id = AMIC_A25L05PT, + .total_size = 64, + .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid4, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { + {32 * 1024, 1}, + {16 * 1024, 1}, + {8 * 1024, 1}, + {4 * 1024, 2}, + }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {64 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_bp1_srwd, + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_256, + .read = spi_chip_read, + .voltage = {2700, 3600}, + }, + + { + .vendor = "AMIC", + .name = "A25L05PU", + .bustype = BUS_SPI, + .manufacture_id = AMIC_ID, + .model_id = AMIC_A25L05PU, + .total_size = 64, + .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid4, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { + {4 * 1024, 2}, + {8 * 1024, 1}, + {16 * 1024, 1}, + {32 * 1024, 1}, + }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {64 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_bp1_srwd, + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_256, + .read = spi_chip_read, + .voltage = {2700, 3600}, + }, + + { + .vendor = "AMIC", + .name = "A25L10PT", + .bustype = BUS_SPI, + .manufacture_id = AMIC_ID, + .model_id = AMIC_A25L10PT, + .total_size = 128, + .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid4, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { + {64 * 1024, 1}, + {32 * 1024, 1}, + {16 * 1024, 1}, + {8 * 1024, 1}, + {4 * 1024, 2}, + }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {128 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_bp1_srwd, + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_256, + .read = spi_chip_read, + .voltage = {2700, 3600}, + }, + + { + .vendor = "AMIC", + .name = "A25L10PU", + .bustype = BUS_SPI, + .manufacture_id = AMIC_ID, + .model_id = AMIC_A25L10PU, + .total_size = 128, + .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid4, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { + {4 * 1024, 2}, + {8 * 1024, 1}, + {16 * 1024, 1}, + {32 * 1024, 1}, + {64 * 1024, 1}, + }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {128 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_bp1_srwd, + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_256, + .read = spi_chip_read, + .voltage = {2700, 3600}, + }, + + { + .vendor = "AMIC", + .name = "A25L20PT", + .bustype = BUS_SPI, + .manufacture_id = AMIC_ID, + .model_id = AMIC_A25L20PT, + .total_size = 256, + .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid4, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { + {64 * 1024, 3}, + {32 * 1024, 1}, + {16 * 1024, 1}, + {8 * 1024, 1}, + {4 * 1024, 2}, + }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {256 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_bp1_srwd, + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_256, + .read = spi_chip_read, + .voltage = {2700, 3600}, + }, + + { + .vendor = "AMIC", + .name = "A25L20PU", + .bustype = BUS_SPI, + .manufacture_id = AMIC_ID, + .model_id = AMIC_A25L20PU, + .total_size = 256, + .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid4, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { + {4 * 1024, 2}, + {8 * 1024, 1}, + {16 * 1024, 1}, + {32 * 1024, 1}, + {64 * 1024, 3}, + }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {256 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_bp1_srwd, + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_256, + .read = spi_chip_read, + .voltage = {2700, 3600}, + }, + + /* The A25L40P{T,U} chips are distinguished by their + * erase block layouts, but without any distinction in RDID. + * This inexplicable quirk was verified by Rudolf Marek + * and discussed on the flashrom mailing list on 2010-07-12. + */ + { + .vendor = "AMIC", + .name = "A25L40PT", + .bustype = BUS_SPI, + .manufacture_id = AMIC_ID, + .model_id = AMIC_A25L40PT, + .total_size = 512, + .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, + .tested = TEST_OK_PR, + .probe = probe_spi_rdid4, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { + {64 * 1024, 7}, + {32 * 1024, 1}, + {16 * 1024, 1}, + {8 * 1024, 1}, + {4 * 1024, 2}, + }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {512 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_bp2_srwd, + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_256, + .read = spi_chip_read, + .voltage = {2700, 3600}, + }, + + { + .vendor = "AMIC", + .name = "A25L40PU", + .bustype = BUS_SPI, + .manufacture_id = AMIC_ID, + .model_id = AMIC_A25L40PU, + .total_size = 512, + .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, + .tested = TEST_OK_PR, + .probe = probe_spi_rdid4, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { + {4 * 1024, 2}, + {8 * 1024, 1}, + {16 * 1024, 1}, + {32 * 1024, 1}, + {64 * 1024, 7}, + }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {512 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_bp2_srwd, + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_256, + .read = spi_chip_read, + .voltage = {2700, 3600}, + }, + + { + .vendor = "AMIC", + .name = "A25L80P", + .bustype = BUS_SPI, + .manufacture_id = AMIC_ID, + .model_id = AMIC_A25L80P, + .total_size = 1024, + .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, + .tested = TEST_OK_PRE, + .probe = probe_spi_rdid4, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { + {4 * 1024, 2}, + {8 * 1024, 1}, + {16 * 1024, 1}, + {32 * 1024, 1}, + {64 * 1024, 15}, + }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {1024 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_bp2_srwd, + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_256, + .read = spi_chip_read, + .voltage = {2700, 3600}, + }, + + { + .vendor = "AMIC", + .name = "A25L16PT", + .bustype = BUS_SPI, + .manufacture_id = AMIC_ID, + .model_id = AMIC_A25L16PT, + .total_size = 2048, + .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid4, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { + {64 * 1024, 31}, + {32 * 1024, 1}, + {16 * 1024, 1}, + {8 * 1024, 1}, + {4 * 1024, 2}, + }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {2048 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {2048 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_bp2_srwd, + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_256, + .read = spi_chip_read, + .voltage = {2700, 3600}, + }, + + { + .vendor = "AMIC", + .name = "A25L16PU", + .bustype = BUS_SPI, + .manufacture_id = AMIC_ID, + .model_id = AMIC_A25L16PU, + .total_size = 2048, + .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, + .tested = TEST_OK_PR, + .probe = probe_spi_rdid4, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { + {4 * 1024, 2}, + {8 * 1024, 1}, + {16 * 1024, 1}, + {32 * 1024, 1}, + {64 * 1024, 31}, + }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {2048 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {2048 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_bp2_srwd, + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_256, + .read = spi_chip_read, + .voltage = {2700, 3600}, + }, + + { + .vendor = "AMIC", + .name = "A25L512", + .bustype = BUS_SPI, + .manufacture_id = AMIC_ID_NOPREFIX, + .model_id = AMIC_A25L512, + .total_size = 64, + .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { { 4 * 1024, 16 } }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { { 64 * 1024, 1 } }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { { 64 * 1024, 1 } }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_bp2_srwd, + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_256, + .read = spi_chip_read, + .voltage = {2700, 3600}, + }, + + { + .vendor = "AMIC", + .name = "A25L010", + .bustype = BUS_SPI, + .manufacture_id = AMIC_ID_NOPREFIX, + .model_id = AMIC_A25L010, + .total_size = 128, + .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { { 4 * 1024, 32 } }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { { 64 * 1024, 2 } }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { { 128 * 1024, 1 } }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_bp2_srwd, + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_256, + .read = spi_chip_read, + .voltage = {2700, 3600}, + }, + + { + .vendor = "AMIC", + .name = "A25L020", + .bustype = BUS_SPI, + .manufacture_id = AMIC_ID_NOPREFIX, + .model_id = AMIC_A25L020, + .total_size = 256, + .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { { 4 * 1024, 64 } }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { { 64 * 1024, 4 } }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { { 256 * 1024, 1 } }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_bp2_srwd, + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_256, + .read = spi_chip_read, + .voltage = {2700, 3600}, + }, + + { + .vendor = "AMIC", + .name = "A25L040", + .bustype = BUS_SPI, + .manufacture_id = AMIC_ID_NOPREFIX, + .model_id = AMIC_A25L040, + .total_size = 512, + .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { { 4 * 1024, 128 } }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { { 64 * 1024, 8 } }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { { 512 * 1024, 1 } }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_bp2_srwd, + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_256, + .read = spi_chip_read, + .voltage = {2700, 3600}, + }, + + { + .vendor = "AMIC", + .name = "A25L080", + .bustype = BUS_SPI, + .manufacture_id = AMIC_ID_NOPREFIX, + .model_id = AMIC_A25L080, + .total_size = 1024, + .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { { 4 * 1024, 256 } }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { { 64 * 1024, 16 } }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { { 1024 * 1024, 1 } }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_bp2_srwd, + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_256, + .read = spi_chip_read, + .voltage = {2700, 3600}, + }, + + { + .vendor = "AMIC", + .name = "A25L016", + .bustype = BUS_SPI, + .manufacture_id = AMIC_ID_NOPREFIX, + .model_id = AMIC_A25L016, + .total_size = 2048, + .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { { 4 * 1024, 512 } }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { { 64 * 1024, 32 } }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { { 2048 * 1024, 1 } }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_bp2_srwd, + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_256, + .read = spi_chip_read, + .voltage = {2700, 3600}, + }, + + { + .vendor = "AMIC", + .name = "A25L032", + .bustype = BUS_SPI, + .manufacture_id = AMIC_ID_NOPREFIX, + .model_id = AMIC_A25L032, + .total_size = 4096, + .page_size = 256, + /* OTP: 64B total; read 0x4B, 0x48; write 0x42 */ + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, + .tested = TEST_OK_PREW, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { { 4 * 1024, 1024 } }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { { 64 * 1024, 64 } }, + .block_erase = spi_block_erase_52, + }, { + .eraseblocks = { { 64 * 1024, 64 } }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { { 4096 * 1024, 1 } }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { { 4096 * 1024, 1 } }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_amic_a25l032, /* bit5: T/B, bit6: prot size */ + .unlock = spi_disable_blockprotect_bp2_srwd, /* TODO: 2nd status reg (read with 0x35) */ + .write = spi_chip_write_256, + .read = spi_chip_read, + .voltage = {2700, 3600}, + }, + + { + .vendor = "AMIC", + .name = "A25LQ16", + .bustype = BUS_SPI, + .manufacture_id = AMIC_ID_NOPREFIX, + .model_id = AMIC_A25LQ16, + .total_size = 2048, + .page_size = 256, + /* supports SFDP */ + /* OTP: 64B total; read 0x4B, 0x48; write 0x42 */ + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = { + { + .eraseblocks = { { 4 * 1024, 512 } }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { { 64 * 1024, 32 } }, + .block_erase = spi_block_erase_52, + }, { + .eraseblocks = { { 64 * 1024, 32 } }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { { 2048 * 1024, 1 } }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { { 2048 * 1024, 1 } }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_amic_a25l032, /* bit5: T/B, bit6: prot size */ + .unlock = spi_disable_blockprotect_bp2_srwd, /* TODO: 2nd status reg (read with 0x35) */ + .write = spi_chip_write_256, + .read = spi_chip_read, + .voltage = {2700, 3600}, + }, + + { + .vendor = "AMIC", + .name = "A25LQ032/A25LQ32A", + .bustype = BUS_SPI, + .manufacture_id = AMIC_ID_NOPREFIX, + .model_id = AMIC_A25LQ032, + .total_size = 4096, + .page_size = 256, + /* A25LQ32A supports SFDP */ + /* OTP: 64B total; read 0x4B, 0x48; write 0x42 */ + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { { 4 * 1024, 1024 } }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { { 64 * 1024, 64 } }, + .block_erase = spi_block_erase_52, + }, { + .eraseblocks = { { 64 * 1024, 64 } }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { { 4096 * 1024, 1 } }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { { 4096 * 1024, 1 } }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_amic_a25l032, /* bit5: T/B, bit6: prot size */ + .unlock = spi_disable_blockprotect_bp2_srwd, /* TODO: 2nd status reg (read with 0x35) */ + .write = spi_chip_write_256, + .read = spi_chip_read, + .voltage = {2700, 3600}, + }, + + { + .vendor = "AMIC", + .name = "A25LQ64", + .bustype = BUS_SPI, + .manufacture_id = AMIC_ID_NOPREFIX, + .model_id = AMIC_A25LQ032, + .total_size = 8192, + .page_size = 256, + /* supports SFDP */ + /* OTP: 512B total; enter 0xB1, exit 0xC1 */ + /* QPI enable 0x35, disable 0xF5 */ + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_QPI, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { { 4 * 1024, 2048 } }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { { 32 * 1024, 256 } }, + .block_erase = spi_block_erase_52, + }, { + .eraseblocks = { { 64 * 1024, 128 } }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { { 8192 * 1024, 1 } }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { { 8192 * 1024, 1 } }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_bp3_srwd, /* bit6 is quad enhance (sic!) */ + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_256, + .read = spi_chip_read, + .voltage = {2700, 3600}, + }, + + { + .vendor = "AMIC", + .name = "A29002B", + .bustype = BUS_PARALLEL, + .manufacture_id = AMIC_ID_NOPREFIX, + .model_id = AMIC_A29002B, + .total_size = 256, + .page_size = 64 * 1024, + .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, + .tested = TEST_UNTESTED, + .probe = probe_jedec, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { + {16 * 1024, 1}, + {8 * 1024, 2}, + {32 * 1024, 1}, + {64 * 1024, 3}, + }, + .block_erase = erase_sector_jedec, + }, { + .eraseblocks = { {256 * 1024, 1} }, + .block_erase = erase_chip_block_jedec, + }, + }, + .write = write_jedec_1, + .read = read_memmapped, + .voltage = {4500, 5500}, + }, + + { + .vendor = "AMIC", + .name = "A29002T", + .bustype = BUS_PARALLEL, + .manufacture_id = AMIC_ID_NOPREFIX, + .model_id = AMIC_A29002T, + .total_size = 256, + .page_size = 64 * 1024, + .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, + .tested = TEST_OK_PREW, + .probe = probe_jedec, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { + {64 * 1024, 3}, + {32 * 1024, 1}, + {8 * 1024, 2}, + {16 * 1024, 1}, + }, + .block_erase = erase_sector_jedec, + }, { + .eraseblocks = { {256 * 1024, 1} }, + .block_erase = erase_chip_block_jedec, + }, + }, + .write = write_jedec_1, + .read = read_memmapped, + .voltage = {4500, 5500}, + }, + + { + .vendor = "AMIC", + .name = "A29040B", + .bustype = BUS_PARALLEL, + .manufacture_id = AMIC_ID_NOPREFIX, + .model_id = AMIC_A29040B, + .total_size = 512, + .page_size = 64 * 1024, + .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, + .tested = TEST_OK_PREW, + .probe = probe_jedec, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {64 * 1024, 8} }, + .block_erase = erase_sector_jedec, + }, { + .eraseblocks = { {512 * 1024, 1} }, + .block_erase = erase_chip_block_jedec, + }, + }, + .write = write_jedec_1, + .read = read_memmapped, + .voltage = {4500, 5500}, + }, + + { + .vendor = "AMIC", + .name = "A49LF040A", + .bustype = BUS_LPC, + .manufacture_id = AMIC_ID_NOPREFIX, + .model_id = AMIC_A49LF040A, + .total_size = 512, + .page_size = 64 * 1024, + .feature_bits = FEATURE_REGISTERMAP | FEATURE_EITHER_RESET, + .tested = TEST_OK_PREW, + .probe = probe_jedec, + .probe_timing = TIMING_ZERO, /* routine is wrapper to probe_jedec (pm49fl00x.c) */ + .block_erasers = + { + { + .eraseblocks = { {64 * 1024, 8} }, + .block_erase = erase_block_jedec, + }, { + .eraseblocks = { {512 * 1024, 1} }, + .block_erase = erase_chip_block_jedec, + } + }, + .unlock = unlock_49fl00x, + .write = write_jedec_1, + .read = read_memmapped, + .voltage = {3000, 3600}, + }, + + { + .vendor = "Atmel", + .name = "AT25DF021", + .bustype = BUS_SPI, + .manufacture_id = ATMEL_ID, + .model_id = ATMEL_AT25DF021, + .total_size = 256, + .page_size = 256, + /* OTP: 128B total, 64B pre-programmed; read 0x77; write 0x9B */ + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 64} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {32 * 1024, 8} }, + .block_erase = spi_block_erase_52, + }, { + .eraseblocks = { {64 * 1024, 4} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {256 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {256 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_at25df, + .unlock = spi_disable_blockprotect_at2x_global_unprotect, + .write = spi_chip_write_256, + .read = spi_chip_read, + .voltage = {2700, 3600}, /* 2.3-3.6V & 2.7-3.6V models available */ + }, + + { + .vendor = "Atmel", + .name = "AT25DF041A", + .bustype = BUS_SPI, + .manufacture_id = ATMEL_ID, + .model_id = ATMEL_AT25DF041A, + .total_size = 512, + .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 128} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {32 * 1024, 16} }, + .block_erase = spi_block_erase_52, + }, { + .eraseblocks = { {64 * 1024, 8} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {512 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {512 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_at25df, + .unlock = spi_disable_blockprotect_at2x_global_unprotect, + .write = spi_chip_write_256, + .read = spi_chip_read, + .voltage = {2700, 3600}, /* 2.3-3.6V & 2.7-3.6V models available */ + }, + + { + .vendor = "Atmel", + .name = "AT25DF081", + .bustype = BUS_SPI, + .manufacture_id = ATMEL_ID, + .model_id = ATMEL_AT25DF081, + .total_size = 1024, + .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 256} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {32 * 1024, 32} }, + .block_erase = spi_block_erase_52, + }, { + .eraseblocks = { {64 * 1024, 16} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {1024 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {1024 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_at25df, + .unlock = spi_disable_blockprotect_at2x_global_unprotect, + .write = spi_chip_write_256, + .read = spi_chip_read, + .voltage = {1600, 2000}, /* Datasheet says range is 1.65-1.95 V */ + }, + + { + .vendor = "Atmel", + .name = "AT25DF081A", + .bustype = BUS_SPI, + .manufacture_id = ATMEL_ID, + .model_id = ATMEL_AT25DF081A, + .total_size = 1024, + .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 256} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {32 * 1024, 32} }, + .block_erase = spi_block_erase_52, + }, { + .eraseblocks = { {64 * 1024, 16} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {1024 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {1024 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_at25df_sec, + .unlock = spi_disable_blockprotect_at2x_global_unprotect_sec, + .write = spi_chip_write_256, + .read = spi_chip_read, + .voltage = {2700, 3600}, + }, + + { + .vendor = "Atmel", + .name = "AT25DF161", + .bustype = BUS_SPI, + .manufacture_id = ATMEL_ID, + .model_id = ATMEL_AT25DF161, + .total_size = 2048, + .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, + .tested = TEST_OK_PROBE, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 512} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {32 * 1024, 64} }, + .block_erase = spi_block_erase_52, + }, { + .eraseblocks = { {64 * 1024, 32} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {2 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {2 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_at25df_sec, + .unlock = spi_disable_blockprotect_at2x_global_unprotect_sec, + .write = spi_chip_write_256, + .read = spi_chip_read, + .voltage = {2700, 3600}, + }, + + { + .vendor = "Atmel", + .name = "AT25DF321", + .bustype = BUS_SPI, + .manufacture_id = ATMEL_ID, + .model_id = ATMEL_AT25DF321, + .total_size = 4096, + .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, + .tested = TEST_OK_PREW, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 1024} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {32 * 1024, 128} }, + .block_erase = spi_block_erase_52, + }, { + .eraseblocks = { {64 * 1024, 64} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {4 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {4 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_at25df, + .unlock = spi_disable_blockprotect_at2x_global_unprotect, + .write = spi_chip_write_256, + .read = spi_chip_read, + .voltage = {2700, 3600}, + }, + + { + .vendor = "Atmel", + .name = "AT25DF321A", + .bustype = BUS_SPI, + .manufacture_id = ATMEL_ID, + .model_id = ATMEL_AT25DF321A, + .total_size = 4096, + .page_size = 256, + /* OTP: 128B total, 64B pre-programmed; read 0x77; write 0x9B */ + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, + .tested = TEST_OK_PREW, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 1024} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {32 * 1024, 128} }, + .block_erase = spi_block_erase_52, + }, { + .eraseblocks = { {64 * 1024, 64} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {4 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {4 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_at25df_sec, + .unlock = spi_disable_blockprotect_at2x_global_unprotect_sec, + .write = spi_chip_write_256, + .read = spi_chip_read, + .voltage = {2700, 3600}, + }, + + { + .vendor = "Atmel", + .name = "AT25DF641(A)", + .bustype = BUS_SPI, + .manufacture_id = ATMEL_ID, + .model_id = ATMEL_AT25DF641, + .total_size = 8192, + .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, + .tested = TEST_OK_PREW, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 2048} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {32 * 1024, 256} }, + .block_erase = spi_block_erase_52, + }, { + .eraseblocks = { {64 * 1024, 128} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {8 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {8 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_at25df_sec, + .unlock = spi_disable_blockprotect_at2x_global_unprotect_sec, + .write = spi_chip_write_256, + .read = spi_chip_read, + .voltage = {2700, 3600}, + }, + + { + .vendor = "Atmel", + .name = "AT25DL081", + .bustype = BUS_SPI, + .manufacture_id = ATMEL_ID, + .model_id = ATMEL_AT25DF081, + .total_size = 1024, + .page_size = 256, + /* OTP: 128B total, 64B pre-programmed; read 0x77; write 0x9B */ + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 256} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {32 * 1024, 32} }, + .block_erase = spi_block_erase_52, + }, { + .eraseblocks = { {64 * 1024, 16} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {1 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {1 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_at25df_sec, + .unlock = spi_disable_blockprotect_at2x_global_unprotect_sec, + .write = spi_chip_write_256, /* Dual I/O (0xA2) supported */ + .read = spi_chip_read, /* Fast read (0x0B), dual I/O (0x3B) supported */ + .voltage = {1650, 1950}, + }, + + { + .vendor = "Atmel", + .name = "AT25DL161", + .bustype = BUS_SPI, + .manufacture_id = ATMEL_ID, + .model_id = ATMEL_AT25DL161, + .total_size = 2048, + .page_size = 256, + /* OTP: 128B total, 64B pre-programmed; read 0x77; write 0x9B */ + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 512} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {32 * 1024, 64} }, + .block_erase = spi_block_erase_52, + }, { + .eraseblocks = { {64 * 1024, 32} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {2 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {2 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_at25df_sec, + .unlock = spi_disable_blockprotect_at2x_global_unprotect_sec, + .write = spi_chip_write_256, /* Dual I/O (0xA2) supported */ + .read = spi_chip_read, /* Fast read (0x0B), dual I/O (0x3B) supported */ + .voltage = {1650, 1950}, + }, + + { + .vendor = "Atmel", + .name = "AT25DQ161", + .bustype = BUS_SPI, + .manufacture_id = ATMEL_ID, + .model_id = ATMEL_AT25DQ161, + .total_size = 2048, + .page_size = 256, + /* OTP: 128B total, 64B pre-programmed; read 0x77; write 0x9B */ + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 512} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {32 * 1024, 64} }, + .block_erase = spi_block_erase_52, + }, { + .eraseblocks = { {64 * 1024, 32} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {2 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {2 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_at25df_sec, + .unlock = spi_disable_blockprotect_at2x_global_unprotect_sec, + .write = spi_chip_write_256, + .read = spi_chip_read, + .voltage = {2700, 3600}, + }, + + { + .vendor = "Atmel", + .name = "AT25F512", + .bustype = BUS_SPI, + .manufacture_id = ATMEL_ID, + .model_id = ATMEL_AT25F512, + .total_size = 64, + .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, + .tested = TEST_OK_PREW, + .probe = probe_spi_at25f, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {32 * 1024, 2} }, + .block_erase = spi_block_erase_52, + }, { + .eraseblocks = { {64 * 1024, 1} }, + .block_erase = spi_block_erase_62, + } + }, + .printlock = spi_prettyprint_status_register_at25f, + .unlock = spi_disable_blockprotect_at25f, + .write = spi_chip_write_256, + .read = spi_chip_read, + .voltage = {2700, 3600}, + }, + + { + .vendor = "Atmel", + .name = "AT25F512A", + .bustype = BUS_SPI, + .manufacture_id = ATMEL_ID, + .model_id = ATMEL_AT25F512A, + .total_size = 64, + .page_size = 128, + .feature_bits = FEATURE_WRSR_WREN, + .tested = TEST_OK_PREW, + .probe = probe_spi_at25f, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {32 * 1024, 2} }, + .block_erase = spi_block_erase_52, + }, { + .eraseblocks = { {64 * 1024, 1} }, + .block_erase = spi_block_erase_62, + } + }, + .printlock = spi_prettyprint_status_register_at25f512a, + /* FIXME: It is not correct to use this one, because the BP1 bit is N/A. */ + .unlock = spi_disable_blockprotect_at25f512a, + .write = spi_chip_write_256, + .read = spi_chip_read, + .voltage = {2700, 3600}, + }, + + { + .vendor = "Atmel", + .name = "AT25F512B", + .bustype = BUS_SPI, + .manufacture_id = ATMEL_ID, + .model_id = ATMEL_AT25F512B, + .total_size = 64, + .page_size = 256, + /* OTP: 128B total, 64B pre-programmed; read 0x77; write 0x9B */ + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 16} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {32 * 1024, 2} }, + .block_erase = spi_block_erase_52, + }, { + .eraseblocks = { {32 * 1024, 2} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {64 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {64 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + }, { + .eraseblocks = { {64 * 1024, 1} }, + .block_erase = spi_block_erase_62, + } + }, + .printlock = spi_prettyprint_status_register_at25f512b, + .unlock = spi_disable_blockprotect_at25f512b, + .write = spi_chip_write_256, + .read = spi_chip_read, + .voltage = {2700, 3600}, + }, + + { + .vendor = "Atmel", + /* The A suffix indicates 33MHz instead of 20MHz clock rate. + * All other properties seem to be the same.*/ + .name = "AT25F1024(A)", + .bustype = BUS_SPI, + .manufacture_id = ATMEL_ID, + .model_id = ATMEL_AT25F1024, + .total_size = 128, + .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, + .tested = TEST_OK_PREW, + .probe = probe_spi_at25f, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {32 * 1024, 4} }, + .block_erase = spi_block_erase_52, + }, { + .eraseblocks = { {128 * 1024, 1} }, + .block_erase = spi_block_erase_62, + } + }, + .printlock = spi_prettyprint_status_register_at25f, + .unlock = spi_disable_blockprotect_at25f, + .write = spi_chip_write_256, + .read = spi_chip_read, + .voltage = {2700, 3600}, + }, + + { + .vendor = "Atmel", + .name = "AT25F2048", + .bustype = BUS_SPI, + .manufacture_id = ATMEL_ID, + .model_id = ATMEL_AT25F2048, + .total_size = 256, + .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, + .tested = TEST_UNTESTED, + .probe = probe_spi_at25f, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {64 * 1024, 4} }, + .block_erase = spi_block_erase_52, + }, { + .eraseblocks = { {256 * 1024, 1} }, + .block_erase = spi_block_erase_62, + } + }, + .printlock = spi_prettyprint_status_register_at25f, + .unlock = spi_disable_blockprotect_at25f, + .write = spi_chip_write_256, + .read = spi_chip_read, + .voltage = {2700, 3600}, + }, + + { + .vendor = "Atmel", + .name = "AT25F4096", + .bustype = BUS_SPI, + .manufacture_id = ATMEL_ID, + .model_id = ATMEL_AT25F4096, + .total_size = 512, + .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, + .tested = TEST_UNTESTED, + .probe = probe_spi_at25f, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {64 * 1024, 8} }, + .block_erase = spi_block_erase_52, + }, { + .eraseblocks = { {512 * 1024, 1} }, + .block_erase = spi_block_erase_62, + } + }, + .printlock = spi_prettyprint_status_register_at25f4096, + /* "Bits 5-6 are 0s when device is not in an internal write cycle." Better leave them alone: */ + .unlock = spi_disable_blockprotect_bp2_srwd, + .write = spi_chip_write_256, + .read = spi_chip_read, + .voltage = {2700, 3600}, + }, + + { + .vendor = "Atmel", + .name = "AT25FS010", + .bustype = BUS_SPI, + .manufacture_id = ATMEL_ID, + .model_id = ATMEL_AT25FS010, + .total_size = 128, + .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, + .tested = TEST_OK_PREW, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 32} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {4 * 1024, 32} }, + .block_erase = spi_block_erase_d7, + }, { + .eraseblocks = { {32 * 1024, 4} }, + .block_erase = spi_block_erase_52, + }, { + .eraseblocks = { {32 * 1024, 4} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {128 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {128 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_at25fs010, + .unlock = spi_disable_blockprotect_at25fs010, + .write = spi_chip_write_256, + .read = spi_chip_read, + .voltage = {2700, 3600}, + }, + + { + .vendor = "Atmel", + .name = "AT25FS040", + .bustype = BUS_SPI, + .manufacture_id = ATMEL_ID, + .model_id = ATMEL_AT25FS040, + .total_size = 512, + .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 128} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {64 * 1024, 8} }, + .block_erase = spi_block_erase_52, + }, { + .eraseblocks = { {64 * 1024, 8} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {512 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {512 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_at25fs040, + .unlock = spi_disable_blockprotect_at25fs040, + .write = spi_chip_write_256, + .read = spi_chip_read, + .voltage = {2700, 3600}, + }, + + { + .vendor = "Atmel", + .name = "AT26DF041", + .bustype = BUS_SPI, + .manufacture_id = ATMEL_ID, + .model_id = ATMEL_AT26DF041, + .total_size = 512, + .page_size = 256, + /* does not support EWSR nor WREN and has no writable status register bits whatsoever */ + .tested = TEST_OK_PREW, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {256, 2048} }, + .block_erase = spi_block_erase_81, + }, { + .eraseblocks = { {2 * 1024, 256} }, + .block_erase = spi_block_erase_50, + }, { + .eraseblocks = { {4 * 1024, 128} }, + .block_erase = spi_block_erase_20, + } + }, + .printlock = spi_prettyprint_status_register_plain, + /* Supports also an incompatible page write (of exactly 256 B) and an auto-erasing write. */ + .write = spi_chip_write_1, + .read = spi_chip_read, /* Fast read (0x0B) supported */ + .voltage = {2700, 3600}, /* 3.0-3.6V for higher speed, 2.7-3.6V normal */ + }, + + { + .vendor = "Atmel", + .name = "AT26DF081A", + .bustype = BUS_SPI, + .manufacture_id = ATMEL_ID, + .model_id = ATMEL_AT26DF081A, + .total_size = 1024, + .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, + .tested = TEST_OK_PREW, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 256} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {32 * 1024, 32} }, + .block_erase = spi_block_erase_52, + }, { + .eraseblocks = { {64 * 1024, 16} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {1024 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {1024 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_at26df081a, + .unlock = spi_disable_blockprotect_at2x_global_unprotect, + .write = spi_chip_write_256, + .read = spi_chip_read, + .voltage = {2700, 3600}, + }, + + { + .vendor = "Atmel", + .name = "AT26DF161", + .bustype = BUS_SPI, + .manufacture_id = ATMEL_ID, + .model_id = ATMEL_AT26DF161, + .total_size = 2048, + .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, + .tested = TEST_OK_PR, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 512} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {32 * 1024, 64} }, + .block_erase = spi_block_erase_52, + }, { + .eraseblocks = { {64 * 1024, 32} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {2 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {2 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_at25df, + .unlock = spi_disable_blockprotect_at2x_global_unprotect, + .write = spi_chip_write_256, + .read = spi_chip_read, + .voltage = {2700, 3600}, + }, + + { + .vendor = "Atmel", + .name = "AT26DF161A", + .bustype = BUS_SPI, + .manufacture_id = ATMEL_ID, + .model_id = ATMEL_AT26DF161A, + .total_size = 2048, + .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, + .tested = TEST_OK_PREW, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 512} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {32 * 1024, 64} }, + .block_erase = spi_block_erase_52, + }, { + .eraseblocks = { {64 * 1024, 32} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {2 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {2 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_at26df081a, + .unlock = spi_disable_blockprotect_at2x_global_unprotect, + .write = spi_chip_write_256, + .read = spi_chip_read, + .voltage = {2700, 3600}, + }, + + /*The AT26DF321 has the same ID as the AT25DF321. */ + /*{ + .vendor = "Atmel", + .name = "AT26DF321", + .bustype = BUS_SPI, + .manufacture_id = ATMEL_ID, + .model_id = ATMEL_AT26DF321, + .total_size = 4096, + .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .printlock = spi_prettyprint_status_register_at26df081a, + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_256, + .read = spi_chip_read, + },*/ + + { + .vendor = "Atmel", + .name = "AT26F004", + .bustype = BUS_SPI, + .manufacture_id = ATMEL_ID, + .model_id = ATMEL_AT26F004, + .total_size = 512, + .page_size = 256, + .tested = {.probe = NT, .read = NT, .erase = NT, .write = BAD }, + .feature_bits = FEATURE_WRSR_WREN, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 128} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {32 * 1024, 16} }, + .block_erase = spi_block_erase_52, + }, { + .eraseblocks = { {64 * 1024, 8} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {512 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {512 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ + .write = NULL /* Incompatible Page write */, + .read = spi_chip_read, + .voltage = {2700, 3600}, + }, + + { + .vendor = "Atmel", + .name = "AT29C512", + .bustype = BUS_PARALLEL, + .manufacture_id = ATMEL_ID, + .model_id = ATMEL_AT29C512, + .total_size = 64, + .page_size = 128, + .feature_bits = FEATURE_LONG_RESET, + .tested = TEST_OK_PREW, + .probe = probe_jedec, + .probe_timing = 10000, /* 10mS, Enter=Exec */ + .block_erasers = + { + { + .eraseblocks = { {64 * 1024, 1} }, + .block_erase = erase_chip_block_jedec, + } + }, + .write = write_jedec, + .read = read_memmapped, + .voltage = {4500, 5500}, + }, + + { + .vendor = "Atmel", + .name = "AT29C010A", + .bustype = BUS_PARALLEL, + .manufacture_id = ATMEL_ID, + .model_id = ATMEL_AT29C010A, + .total_size = 128, + .page_size = 128, + .feature_bits = FEATURE_LONG_RESET, + .tested = TEST_OK_PRE, + .probe = probe_jedec, + .probe_timing = 10000, /* 10mS, Enter=Exec */ + .block_erasers = + { + { + .eraseblocks = { {128 * 1024, 1} }, + .block_erase = erase_chip_block_jedec, + } + }, + .write = write_jedec, /* FIXME */ + .read = read_memmapped, + .voltage = {4500, 5500}, + }, + + { + .vendor = "Atmel", + .name = "AT29C020", + .bustype = BUS_PARALLEL, + .manufacture_id = ATMEL_ID, + .model_id = ATMEL_AT29C020, + .total_size = 256, + .page_size = 256, + .feature_bits = FEATURE_LONG_RESET, + .tested = TEST_OK_PREW, + .probe = probe_jedec, + .probe_timing = 10000, /* 10ms */ + .block_erasers = + { + { + .eraseblocks = { {256 * 1024, 1} }, + .block_erase = erase_chip_block_jedec, + } + }, + .write = write_jedec, + .read = read_memmapped, + .voltage = {4500, 5500}, + }, + + { + .vendor = "Atmel", + .name = "AT29C040A", + .bustype = BUS_PARALLEL, + .manufacture_id = ATMEL_ID, + .model_id = ATMEL_AT29C040A, + .total_size = 512, + .page_size = 256, + .feature_bits = FEATURE_LONG_RESET, + .tested = TEST_UNTESTED, + .probe = probe_jedec, + .probe_timing = 10000, /* 10 ms */ + .block_erasers = + { + { + .eraseblocks = { {512 * 1024, 1} }, + .block_erase = erase_chip_block_jedec, + } + }, + .write = write_jedec, + .read = read_memmapped, + .voltage = {4500, 5500}, + }, + + { + .vendor = "Atmel", + .name = "AT45CS1282", + .bustype = BUS_SPI, + .manufacture_id = ATMEL_ID, + .model_id = ATMEL_AT45CS1282, + .total_size = 16896 /* No power of two sizes */, + .page_size = 1056 /* No power of two sizes */, + /* does not support EWSR nor WREN and has no writable status register bits whatsoever */ + /* OTP: 128B total, 64B pre-programmed; read 0x77 (4 dummy bytes); write 0x9A (via buffer) */ + .feature_bits = FEATURE_OTP, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { + {8 * 1056, 1}, /* sector 0a: opcode 50h */ + {248 * 1056, 1}, /* sector 0b: opcode 7Ch */ + {256 * 1056, 63}, /* sectors 1 - 63: opcode 7Ch */ + }, + .block_erase = spi_erase_at45cs_sector, + } + }, + .printlock = spi_prettyprint_status_register_plain, + .gran = write_gran_1056bytes, + .write = spi_write_at45db, + .read = spi_read_at45db, + .voltage = {2700, 3600}, + }, + + { + .vendor = "Atmel", + .name = "AT45DB011D", + .bustype = BUS_SPI, + .manufacture_id = ATMEL_ID, + .model_id = ATMEL_AT45DB011D, + .total_size = 128 /* or 132, determined from status register */, + .page_size = 256 /* or 264, determined from status register */, + /* does not support EWSR nor WREN and has no writable status register bits whatsoever */ + /* OTP: 128B total, 64B pre-programmed; read 0x77; write 0x9B */ + .feature_bits = FEATURE_OTP, + .tested = TEST_UNTESTED, + .probe = probe_spi_at45db, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {256, 512} }, + .block_erase = spi_erase_at45db_page, + }, { + .eraseblocks = { {8 * 256, 512/8} }, + .block_erase = spi_erase_at45db_block, + }, { + .eraseblocks = { + {8 * 256, 1}, + {120 * 256, 1}, + {128 * 256, 3}, + }, + .block_erase = spi_erase_at45db_sector + }, { + .eraseblocks = { {128 * 1024, 1} }, + .block_erase = spi_erase_at45db_chip, + } + }, + .unlock = spi_disable_blockprotect_at45db, /* Impossible if locked down or #WP is low */ + .printlock = spi_prettyprint_status_register_at45db, + /* granularity will be set by the probing function. */ + .write = spi_write_at45db, + .read = spi_read_at45db, /* Fast read (0x0B) supported */ + .voltage = {2700, 3600}, + }, + + { + .vendor = "Atmel", + .name = "AT45DB021D", + .bustype = BUS_SPI, + .manufacture_id = ATMEL_ID, + .model_id = ATMEL_AT45DB021D, + .total_size = 256 /* or 264, determined from status register */, + .page_size = 256 /* or 264, determined from status register */, + /* does not support EWSR nor WREN and has no writable status register bits whatsoever */ + /* OTP: 128B total, 64B pre-programmed; read 0x77; write 0x9B */ + .feature_bits = FEATURE_OTP, + .tested = TEST_UNTESTED, + .probe = probe_spi_at45db, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {256, 1024} }, + .block_erase = spi_erase_at45db_page, + }, { + .eraseblocks = { {8 * 256, 1024/8} }, + .block_erase = spi_erase_at45db_block, + }, { + .eraseblocks = { + {8 * 256, 1}, + {120 * 256, 1}, + {128 * 256, 7}, + }, + .block_erase = spi_erase_at45db_sector + }, { + .eraseblocks = { {256 * 1024, 1} }, + .block_erase = spi_erase_at45db_chip, + } + }, + .unlock = spi_disable_blockprotect_at45db, /* Impossible if locked down or #WP is low */ + .printlock = spi_prettyprint_status_register_at45db, + /* granularity will be set by the probing function. */ + .write = spi_write_at45db, + .read = spi_read_at45db, /* Fast read (0x0B) supported */ + .voltage = {2700, 3600}, + }, + + { + .vendor = "Atmel", + .name = "AT45DB041D", + .bustype = BUS_SPI, + .manufacture_id = ATMEL_ID, + .model_id = ATMEL_AT45DB041D, + .total_size = 512 /* or 528, determined from status register */, + .page_size = 256 /* or 264, determined from status register */, + /* does not support EWSR nor WREN and has no writable status register bits whatsoever */ + /* OTP: 128B total, 64B pre-programmed; read 0x77; write 0x9B */ + .feature_bits = FEATURE_OTP, + .tested = TEST_OK_PREW, + .probe = probe_spi_at45db, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {256, 2048} }, + .block_erase = spi_erase_at45db_page, + }, { + .eraseblocks = { {8 * 256, 2048/8} }, + .block_erase = spi_erase_at45db_block, + }, { + .eraseblocks = { + {8 * 256, 1}, + {248 * 256, 1}, + {256 * 256, 7}, + }, + .block_erase = spi_erase_at45db_sector + }, { + .eraseblocks = { {512 * 1024, 1} }, + .block_erase = spi_erase_at45db_chip, + } + }, + .unlock = spi_disable_blockprotect_at45db, /* Impossible if locked down or #WP is low */ + .printlock = spi_prettyprint_status_register_at45db, + /* granularity will be set by the probing function. */ + .write = spi_write_at45db, + .read = spi_read_at45db, /* Fast read (0x0B) supported */ + .voltage = {2700, 3600}, /* 2.5-3.6V & 2.7-3.6V models available */ + }, + + { + .vendor = "Atmel", + .name = "AT45DB081D", + .bustype = BUS_SPI, + .manufacture_id = ATMEL_ID, + .model_id = ATMEL_AT45DB081D, + .total_size = 1024 /* or 1056, determined from status register */, + .page_size = 256 /* or 264, determined from status register */, + /* does not support EWSR nor WREN and has no writable status register bits whatsoever */ + /* OTP: 128B total, 64B pre-programmed; read 0x77; write 0x9B */ + .feature_bits = FEATURE_OTP, + .tested = TEST_UNTESTED, + .probe = probe_spi_at45db, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {256, 4096} }, + .block_erase = spi_erase_at45db_page, + }, { + .eraseblocks = { {8 * 256, 4096/8} }, + .block_erase = spi_erase_at45db_block, + }, { + .eraseblocks = { + {8 * 256, 1}, + {248 * 256, 1}, + {256 * 256, 15}, + }, + .block_erase = spi_erase_at45db_sector + }, { + .eraseblocks = { {1024 * 1024, 1} }, + .block_erase = spi_erase_at45db_chip, + } + }, + .unlock = spi_disable_blockprotect_at45db, /* Impossible if locked down or #WP is low */ + .printlock = spi_prettyprint_status_register_at45db, + /* granularity will be set by the probing function. */ + .write = spi_write_at45db, + .read = spi_read_at45db, /* Fast read (0x0B) supported */ + .voltage = {2700, 3600}, /* 2.5-3.6V & 2.7-3.6V models available */ + }, + + { + .vendor = "Atmel", + .name = "AT45DB161D", + .bustype = BUS_SPI, + .manufacture_id = ATMEL_ID, + .model_id = ATMEL_AT45DB161D, + .total_size = 2048 /* or 2112, determined from status register */, + .page_size = 512 /* or 528, determined from status register */, + /* does not support EWSR nor WREN and has no writable status register bits whatsoever */ + /* OTP: 128B total, 64B pre-programmed; read 0x77; write 0x9B */ + .feature_bits = FEATURE_OTP, + .tested = TEST_OK_PREW, + .probe = probe_spi_at45db, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {512, 4096} }, + .block_erase = spi_erase_at45db_page, + }, { + .eraseblocks = { {8 * 512, 4096/8} }, + .block_erase = spi_erase_at45db_block, + }, { + .eraseblocks = { + {8 * 512, 1}, + {248 * 512, 1}, + {256 * 512, 15}, + }, + .block_erase = spi_erase_at45db_sector + }, { + .eraseblocks = { {2048 * 1024, 1} }, + .block_erase = spi_erase_at45db_chip, + } + }, + .unlock = spi_disable_blockprotect_at45db, /* Impossible if locked down or #WP is low */ + .printlock = spi_prettyprint_status_register_at45db, + /* granularity will be set by the probing function. */ + .write = spi_write_at45db, + .read = spi_read_at45db, /* Fast read (0x0B) supported */ + .voltage = {2700, 3600}, /* 2.5-3.6V & 2.7-3.6V models available */ + }, + + { + .vendor = "Atmel", + .name = "AT45DB321C", + .bustype = BUS_SPI, + .manufacture_id = ATMEL_ID, + .model_id = ATMEL_AT45DB321C, + .total_size = 4224 /* No power of two sizes */, + .page_size = 528 /* No power of two sizes */, + /* does not support EWSR nor WREN and has no writable status register bits whatsoever */ + /* OTP: 128B total, 64B pre-programmed; read 0x77 (4 dummy bytes); write 0x9A (via buffer) */ + .feature_bits = FEATURE_OTP, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {528, 8192} }, + .block_erase = spi_erase_at45db_page, + }, { + .eraseblocks = { {8 * 528, 8192/8} }, + .block_erase = spi_erase_at45db_block, + }, /* Although the datasheets describes sectors (which can be write protected) + * there seems to be no erase functions for them. + { + .eraseblocks = { + {8 * 528, 1}, + {120 * 528, 1}, + {128 * 528, 63}, + }, + .block_erase = spi_erase_at45db_sector + }, */ { + .eraseblocks = { {4224 * 1024, 1} }, + .block_erase = spi_erase_at45db_chip, + } + }, + .printlock = spi_prettyprint_status_register_at45db, /* Bit 0 is undefined, no lockdown */ + .gran = write_gran_528bytes, + .write = spi_write_at45db, + .read = spi_read_at45db_e8, /* 3 address and 4 dummy bytes */ + .voltage = {2700, 3600}, + }, + + { + .vendor = "Atmel", + .name = "AT45DB321D", + .bustype = BUS_SPI, + .manufacture_id = ATMEL_ID, + .model_id = ATMEL_AT45DB321D, + .total_size = 4096 /* or 4224, determined from status register */, + .page_size = 512 /* or 528, determined from status register */, + /* does not support EWSR nor WREN and has no writable status register bits whatsoever */ + /* OTP: 128B total, 64B pre-programmed; read 0x77; write 0x9B */ + .feature_bits = FEATURE_OTP, + .tested = TEST_UNTESTED, + .probe = probe_spi_at45db, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {512, 8192} }, + .block_erase = spi_erase_at45db_page, + }, { + .eraseblocks = { {8 * 512, 8192/8} }, + .block_erase = spi_erase_at45db_block, + }, { + .eraseblocks = { + {8 * 512, 1}, + {120 * 512, 1}, + {128 * 512, 63}, + }, + .block_erase = spi_erase_at45db_sector + }, { + .eraseblocks = { {4096 * 1024, 1} }, + .block_erase = spi_erase_at45db_chip, + } + }, + .unlock = spi_disable_blockprotect_at45db, /* Impossible if locked down or #WP is low */ + .printlock = spi_prettyprint_status_register_at45db, + /* granularity will be set by the probing function. */ + .write = spi_write_at45db, + .read = spi_read_at45db, /* Fast read (0x0B) supported */ + .voltage = {2700, 3600}, /* 2.5-3.6V & 2.7-3.6V models available */ + }, + + { + .vendor = "Atmel", + .name = "AT45DB321E", + .bustype = BUS_SPI, + .manufacture_id = ATMEL_ID, + .model_id = ATMEL_AT45DB321C, + .total_size = 4096 /* or 4224, determined from status register */, + .page_size = 512 /* or 528, determined from status register */, + /* does not support EWSR nor WREN and has no writable status register bits whatsoever */ + /* OTP: 128B total, 64B pre-programmed; read 0x77; write 0x9B */ + .feature_bits = FEATURE_OTP, + .tested = TEST_UNTESTED, + .probe = probe_spi_at45db, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {512, 8192} }, + .block_erase = spi_erase_at45db_page, + }, { + .eraseblocks = { {8 * 512, 8192/8} }, + .block_erase = spi_erase_at45db_block, + }, { + .eraseblocks = { + {8 * 512, 1}, + {120 * 512, 1}, + {128 * 512, 63}, + }, + .block_erase = spi_erase_at45db_sector + }, { + .eraseblocks = { {4096 * 1024, 1} }, + .block_erase = spi_erase_at45db_chip, + } + }, + .unlock = spi_disable_blockprotect_at45db, /* Impossible if locked down or #WP is low */ + .printlock = spi_prettyprint_status_register_at45db, /* has a 2nd status register */ + /* granularity will be set by the probing function. */ + .write = spi_write_at45db, + .read = spi_read_at45db, /* Fast read (0x0B) supported */ + .voltage = {2500, 3600}, /* 2.3-3.6V & 2.5-3.6V models available */ + }, + + { + .vendor = "Atmel", + .name = "AT45DB642D", + .bustype = BUS_SPI, + .manufacture_id = ATMEL_ID, + .model_id = ATMEL_AT45DB642D, + .total_size = 8192 /* or 8448, determined from status register */, + .page_size = 1024 /* or 1056, determined from status register */, + /* does not support EWSR nor WREN and has no writable status register bits whatsoever */ + /* OTP: 128B total, 64B pre-programmed; read 0x77; write 0x9B */ + .feature_bits = FEATURE_OTP, + .tested = TEST_UNTESTED, + .probe = probe_spi_at45db, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {1024, 8192} }, + .block_erase = spi_erase_at45db_page, + }, { + .eraseblocks = { {8 * 1024, 8192/8} }, + .block_erase = spi_erase_at45db_block, + }, { + .eraseblocks = { + {8 * 1024, 1}, + {248 * 1024, 1}, + {256 * 1024, 31}, + }, + .block_erase = spi_erase_at45db_sector + }, { + .eraseblocks = { {8192 * 1024, 1} }, + .block_erase = spi_erase_at45db_chip, + } + }, + .unlock = spi_disable_blockprotect_at45db, /* Impossible if locked down or #WP is low */ + .printlock = spi_prettyprint_status_register_at45db, + /* granularity will be set by the probing function. */ + .write = spi_write_at45db, + .read = spi_read_at45db, /* Fast read (0x0B) supported */ + .voltage = {2700, 3600}, + }, + + { + .vendor = "Atmel", + .name = "AT49BV512", + .bustype = BUS_PARALLEL, + .manufacture_id = ATMEL_ID, + .model_id = ATMEL_AT49BV512, + .total_size = 64, + .page_size = 64, + .feature_bits = FEATURE_EITHER_RESET, + .tested = TEST_OK_PREW, + .probe = probe_jedec, + .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ + .block_erasers = + { + { + .eraseblocks = { {64 * 1024, 1} }, + .block_erase = erase_chip_block_jedec, + } + }, + .write = write_jedec_1, + .read = read_memmapped, + .voltage = {2700, 3600}, + }, + + { + .vendor = "Atmel", + .name = "AT49F002(N)", + .bustype = BUS_PARALLEL, + .manufacture_id = ATMEL_ID, + .model_id = ATMEL_AT49F002N, + .total_size = 256, + .page_size = 256, + .feature_bits = FEATURE_EITHER_RESET, + .tested = TEST_UNTESTED, + .probe = probe_jedec, + .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ + .block_erasers = + { + { + .eraseblocks = { + {16 * 1024, 1}, + {8 * 1024, 2}, + {96 * 1024, 1}, + {128 * 1024, 1}, + }, + .block_erase = erase_sector_jedec, + }, { + .eraseblocks = { {256 * 1024, 1} }, + .block_erase = erase_chip_block_jedec, + } + }, + .write = write_jedec_1, + .read = read_memmapped, + .voltage = {4500, 5500}, + }, + + { + .vendor = "Atmel", + .name = "AT49F002(N)T", + .bustype = BUS_PARALLEL, + .manufacture_id = ATMEL_ID, + .model_id = ATMEL_AT49F002NT, + .total_size = 256, + .page_size = 256, + .feature_bits = FEATURE_EITHER_RESET, + .tested = TEST_OK_PR, + .probe = probe_jedec, + .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ + .block_erasers = + { + { + .eraseblocks = { + {128 * 1024, 1}, + {96 * 1024, 1}, + {8 * 1024, 2}, + {16 * 1024, 1}, + }, + .block_erase = erase_sector_jedec, + }, { + .eraseblocks = { {256 * 1024, 1} }, + .block_erase = erase_chip_block_jedec, + } + }, + .write = write_jedec_1, + .read = read_memmapped, + .voltage = {4500, 5500}, + }, + + { + .vendor = "Atmel", + .name = "AT49(H)F010", + .bustype = BUS_PARALLEL, + .manufacture_id = ATMEL_ID, + .model_id = ATMEL_AT49F010, + .total_size = 128, + .page_size = 0, /* unused */ + .feature_bits = FEATURE_EITHER_RESET, + .tested = TEST_OK_PREW, + .probe = probe_jedec, + .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ + .block_erasers = + { + { + .eraseblocks = { {128 * 1024, 1} }, + .block_erase = erase_chip_block_jedec, + } + }, + .printlock = printlock_at49f, + .write = write_jedec_1, + .read = read_memmapped, + .voltage = {4500, 5500}, + }, + + { + .vendor = "Atmel", + .name = "AT49F020", + .bustype = BUS_PARALLEL, + .manufacture_id = ATMEL_ID, + .model_id = ATMEL_AT49F020, + .total_size = 256, + .page_size = 0, /* unused */ + .feature_bits = FEATURE_EITHER_RESET, + .tested = TEST_OK_PRE, + .probe = probe_jedec, + .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ + .block_erasers = + { + { + .eraseblocks = { {256 * 1024, 1} }, + .block_erase = erase_chip_block_jedec, + } + /* Chip features an optional permanent write protection + * of the first 8 kB. The erase function is the same as + * above, but 00000H to 01FFFH will not be erased. + * FIXME: add another eraser when partial erasers are + * supported. + */ + }, + .printlock = printlock_at49f, + .write = write_jedec_1, + .read = read_memmapped, + .voltage = {4500, 5500}, + }, + + { + .vendor = "Atmel", + .name = "AT49F040", + .bustype = BUS_PARALLEL, + .manufacture_id = ATMEL_ID, + .model_id = ATMEL_AT49F040, + .total_size = 512, + .page_size = 0, /* unused */ + .feature_bits = FEATURE_EITHER_RESET, + .tested = TEST_UNTESTED, + .probe = probe_jedec, + .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ + .block_erasers = + { + { + .eraseblocks = { {512 * 1024, 1} }, + .block_erase = erase_chip_block_jedec, + } + /* Chip features an optional permanent write protection + * of the first 16 kB. The erase function is the same as + * above, but 00000H to 03FFFH will not be erased. + * FIXME: add another eraser when partial erasers are + * supported. + */ + }, + .printlock = printlock_at49f, + .write = write_jedec_1, + .read = read_memmapped, + .voltage = {4500, 5500}, + }, + + { + .vendor = "Atmel", + .name = "AT49F080", + .bustype = BUS_PARALLEL, + .manufacture_id = ATMEL_ID, + .model_id = ATMEL_AT49F080, + .total_size = 1024, + .page_size = 0, /* unused */ + .feature_bits = FEATURE_EITHER_RESET, + .tested = TEST_UNTESTED, + .probe = probe_jedec, + .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ + .block_erasers = + { + { + .eraseblocks = { {1024 * 1024, 1} }, + .block_erase = erase_chip_block_jedec, + } + /* Chip features an optional permanent write protection + * of the first 16 kB. The erase function is the same as + * above, but 00000H to 03FFFH will not be erased. + * FIXME: add another eraser when partial erasers are + * supported. + */ + }, + .printlock = printlock_at49f, + .write = write_jedec_1, + .read = read_memmapped, + .voltage = {4500, 5500}, + }, + + { + /* 'top' version of AT49F080. equal in all aspects but the boot block address */ + .vendor = "Atmel", + .name = "AT49F080T", + .bustype = BUS_PARALLEL, + .manufacture_id = ATMEL_ID, + .model_id = ATMEL_AT49F080T, + .total_size = 1024, + .page_size = 0, /* unused */ + .feature_bits = FEATURE_EITHER_RESET, + .tested = TEST_UNTESTED, + .probe = probe_jedec, + .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ + .block_erasers = + { + { + .eraseblocks = { {1024 * 1024, 1} }, + .block_erase = erase_chip_block_jedec, + } + /* Chip features an optional permanent write protection + * of the first 16 kB. The erase function is the same as + * above, but FC000H to FFFFFH will not be erased. + * FIXME: add another eraser when partial erasers are + * supported. + */ + }, + .printlock = printlock_at49f, + .write = write_jedec_1, + .read = read_memmapped, + .voltage = {4500, 5500}, + }, + + { + .vendor = "Atmel", + .name = "AT49LH002", + .bustype = BUS_LPC | BUS_FWH, /* A/A Mux */ + .manufacture_id = ATMEL_ID, + .model_id = ATMEL_AT49LH002, + .total_size = 256, + .page_size = 0, /* unused */ + .feature_bits = FEATURE_REGISTERMAP, /* TODO: LPC OK too? */ + .tested = TEST_UNTESTED, + .probe = probe_82802ab, /* TODO: 0xff cmd not documented? */ + .probe_timing = TIMING_FIXME, + .block_erasers = + { + { + .eraseblocks = { + {64 * 1024, 3}, + {32 * 1024, 1}, + {8 * 1024, 2}, + {16 * 1024, 1}, + }, + .block_erase = erase_block_82802ab, + }, { + .eraseblocks = { + {64 * 1024, 4}, + }, + .block_erase = NULL, /* TODO: Implement. */ + }, + }, + .printlock = NULL, /* TODO */ + .unlock = NULL, /* unlock_82802ab() not correct(?) */ + .write = write_82802ab, + .read = read_memmapped, + .voltage = {3000, 3600}, + }, + + { + .vendor = "Catalyst", + .name = "CAT28F512", + .bustype = BUS_PARALLEL, + .manufacture_id = CATALYST_ID, + .model_id = CATALYST_CAT28F512, + .total_size = 64, + .page_size = 0, /* unused */ + .feature_bits = 0, + .tested = TEST_OK_PR, + .probe = probe_jedec, /* FIXME! */ + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {64 * 1024, 1} }, + .block_erase = NULL, /* TODO */ + }, + }, + .write = NULL, /* TODO */ + .read = read_memmapped, + .voltage = {4500, 5500}, + }, + + { + .vendor = "Bright", + .name = "BM29F040", + .bustype = BUS_PARALLEL, + .manufacture_id = BRIGHT_ID, + .model_id = BRIGHT_BM29F040, + .total_size = 512, + .page_size = 64 * 1024, + .feature_bits = FEATURE_EITHER_RESET, + .tested = TEST_OK_PR, + .probe = probe_jedec, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {64 * 1024, 8} }, + .block_erase = erase_sector_jedec, + }, { + .eraseblocks = { {512 * 1024, 1} }, + .block_erase = erase_chip_block_jedec, + }, + }, + .write = write_jedec_1, + .read = read_memmapped, + .voltage = {4500, 5500}, + }, + + { + .vendor = "ESMT", + .name = "F49B002UA", + .bustype = BUS_PARALLEL, + .manufacture_id = ESMT_ID, + .model_id = ESMT_F49B002UA, + .total_size = 256, + .page_size = 4096, + .feature_bits = FEATURE_EITHER_RESET, + .tested = TEST_UNTESTED, + .probe = probe_jedec, + .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ + .block_erasers = + { + { + .eraseblocks = { + {128 * 1024, 1}, + {96 * 1024, 1}, + {8 * 1024, 2}, + {16 * 1024, 1}, + }, + .block_erase = erase_sector_jedec, + }, { + .eraseblocks = { {256 * 1024, 1} }, + .block_erase = erase_chip_block_jedec, + } + }, + .write = write_jedec_1, + .read = read_memmapped, + .voltage = {4500, 5500}, + }, + + { + .vendor = "ESMT", + .name = "F25L008A", + .bustype = BUS_SPI, + .manufacture_id = ESMT_ID, + .model_id = ESMT_F25L008A, + .total_size = 1024, + .page_size = 256, + .feature_bits = FEATURE_WRSR_EITHER, + .tested = TEST_OK_PREW, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 256} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {64 * 1024, 16} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {1024 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {1024 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_1, + .read = spi_chip_read, + .voltage = {2700, 3600}, + }, + + { + .vendor = "ESMT", + .name = "F25L32PA", + .bustype = BUS_SPI, + .manufacture_id = ESMT_ID, + .model_id = ESMT_F25L32PA, + .total_size = 4096, + .page_size = 256, + .feature_bits = FEATURE_WRSR_EITHER | FEATURE_OTP, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 1024} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {64 * 1024, 64} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {4 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {4 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_bp2_bpl, + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_256, + .read = spi_chip_read, + .voltage = {2700, 3600}, + }, + + { + .vendor = "Eon", + .name = "EN25B05", + .bustype = BUS_SPI, + .manufacture_id = EON_ID_NOPREFIX, + .model_id = EON_EN25B05, + .total_size = 64, + .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { + {4 * 1024, 2}, + {8 * 1024, 1}, + {16 * 1024, 1}, + {32 * 1024, 1}, + }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {64 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_256, + .read = spi_chip_read, + .voltage = {2700, 3600}, + }, + + { + .vendor = "Eon", + .name = "EN25B05T", + .bustype = BUS_SPI, + .manufacture_id = EON_ID_NOPREFIX, + .model_id = EON_EN25B05, + .total_size = 64, + .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { + {32 * 1024, 1}, + {16 * 1024, 1}, + {8 * 1024, 1}, + {4 * 1024, 2}, + }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {64 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_256, + .read = spi_chip_read, + .voltage = {2700, 3600}, + }, + + { + .vendor = "Eon", + .name = "EN25B10", + .bustype = BUS_SPI, + .manufacture_id = EON_ID_NOPREFIX, + .model_id = EON_EN25B10, + .total_size = 128, + .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { + {4 * 1024, 2}, + {8 * 1024, 1}, + {16 * 1024, 1}, + {32 * 1024, 3}, + }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {128 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_256, + .read = spi_chip_read, + .voltage = {2700, 3600}, + }, + + { + .vendor = "Eon", + .name = "EN25B10T", + .bustype = BUS_SPI, + .manufacture_id = EON_ID_NOPREFIX, + .model_id = EON_EN25B10, + .total_size = 128, + .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, + .tested = TEST_OK_PREW, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { + {32 * 1024, 3}, + {16 * 1024, 1}, + {8 * 1024, 1}, + {4 * 1024, 2}, + }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {128 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_256, + .read = spi_chip_read, + .voltage = {2700, 3600}, + }, + + { + .vendor = "Eon", + .name = "EN25B20", + .bustype = BUS_SPI, + .manufacture_id = EON_ID_NOPREFIX, + .model_id = EON_EN25B20, + .total_size = 256, + .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { + {4 * 1024, 2}, + {8 * 1024, 1}, + {16 * 1024, 1}, + {32 * 1024, 1}, + {64 * 1024, 3} + }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {256 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_256, + .read = spi_chip_read, + .voltage = {2700, 3600}, + }, + + { + .vendor = "Eon", + .name = "EN25B20T", + .bustype = BUS_SPI, + .manufacture_id = EON_ID_NOPREFIX, + .model_id = EON_EN25B20, + .total_size = 256, + .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { + {64 * 1024, 3}, + {32 * 1024, 1}, + {16 * 1024, 1}, + {8 * 1024, 1}, + {4 * 1024, 2}, + }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {256 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_256, + .read = spi_chip_read, + .voltage = {2700, 3600}, + }, + + { + .vendor = "Eon", + .name = "EN25B40", + .bustype = BUS_SPI, + .manufacture_id = EON_ID_NOPREFIX, + .model_id = EON_EN25B40, + .total_size = 512, + .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { + {4 * 1024, 2}, + {8 * 1024, 1}, + {16 * 1024, 1}, + {32 * 1024, 1}, + {64 * 1024, 7} + }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {512 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_256, + .read = spi_chip_read, + .voltage = {2700, 3600}, + }, + + { + .vendor = "Eon", + .name = "EN25B40T", + .bustype = BUS_SPI, + .manufacture_id = EON_ID_NOPREFIX, + .model_id = EON_EN25B40, + .total_size = 512, + .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { + {64 * 1024, 7}, + {32 * 1024, 1}, + {16 * 1024, 1}, + {8 * 1024, 1}, + {4 * 1024, 2}, + }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {512 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_256, + .read = spi_chip_read, + .voltage = {2700, 3600}, + }, + + { + .vendor = "Eon", + .name = "EN25B80", + .bustype = BUS_SPI, + .manufacture_id = EON_ID_NOPREFIX, + .model_id = EON_EN25B80, + .total_size = 1024, + .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { + {4 * 1024, 2}, + {8 * 1024, 1}, + {16 * 1024, 1}, + {32 * 1024, 1}, + {64 * 1024, 15} + }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {1024 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_256, + .read = spi_chip_read, + .voltage = {2700, 3600}, + }, + + { + .vendor = "Eon", + .name = "EN25B80T", + .bustype = BUS_SPI, + .manufacture_id = EON_ID_NOPREFIX, + .model_id = EON_EN25B80, + .total_size = 1024, + .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { + {64 * 1024, 15}, + {32 * 1024, 1}, + {16 * 1024, 1}, + {8 * 1024, 1}, + {4 * 1024, 2}, + }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {1024 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_256, + .read = spi_chip_read, + .voltage = {2700, 3600}, + }, + + { + .vendor = "Eon", + .name = "EN25B16", + .bustype = BUS_SPI, + .manufacture_id = EON_ID_NOPREFIX, + .model_id = EON_EN25B16, + .total_size = 2048, + .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { + {4 * 1024, 2}, + {8 * 1024, 1}, + {16 * 1024, 1}, + {32 * 1024, 1}, + {64 * 1024, 31}, + }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {2 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_256, + .read = spi_chip_read, + .voltage = {2700, 3600}, + }, + + { + .vendor = "Eon", + .name = "EN25B16T", + .bustype = BUS_SPI, + .manufacture_id = EON_ID_NOPREFIX, + .model_id = EON_EN25B16, + .total_size = 2048, + .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { + {64 * 1024, 31}, + {32 * 1024, 1}, + {16 * 1024, 1}, + {8 * 1024, 1}, + {4 * 1024, 2}, + }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {2 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_256, + .read = spi_chip_read, + .voltage = {2700, 3600}, + }, + + { + .vendor = "Eon", + .name = "EN25B32", + .bustype = BUS_SPI, + .manufacture_id = EON_ID_NOPREFIX, + .model_id = EON_EN25B32, + .total_size = 4096, + .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { + {4 * 1024, 2}, + {8 * 1024, 1}, + {16 * 1024, 1}, + {32 * 1024, 1}, + {64 * 1024, 63}, + }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {4 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_256, + .read = spi_chip_read, + .voltage = {2700, 3600}, + }, + + { + .vendor = "Eon", + .name = "EN25B32T", + .bustype = BUS_SPI, + .manufacture_id = EON_ID_NOPREFIX, + .model_id = EON_EN25B32, + .total_size = 4096, + .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { + {64 * 1024, 63}, + {32 * 1024, 1}, + {16 * 1024, 1}, + {8 * 1024, 1}, + {4 * 1024, 2}, + }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {4 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_256, + .read = spi_chip_read, + .voltage = {2700, 3600}, + }, + + { + .vendor = "Eon", + .name = "EN25B64", + .bustype = BUS_SPI, + .manufacture_id = EON_ID_NOPREFIX, + .model_id = EON_EN25B64, + .total_size = 8192, + .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { + {4 * 1024, 2}, + {8 * 1024, 1}, + {16 * 1024, 1}, + {32 * 1024, 1}, + {64 * 1024, 127}, + }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {8 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_256, + .read = spi_chip_read, + .voltage = {2700, 3600}, + }, + + { + .vendor = "Eon", + .name = "EN25B64T", + .bustype = BUS_SPI, + .manufacture_id = EON_ID_NOPREFIX, + .model_id = EON_EN25B64, + .total_size = 8192, + .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { + {64 * 1024, 127}, + {32 * 1024, 1}, + {16 * 1024, 1}, + {8 * 1024, 1}, + {4 * 1024, 2}, + }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {8 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_256, + .read = spi_chip_read, + .voltage = {2700, 3600}, + }, + + { + .vendor = "Eon", + .name = "EN25F05", + .bustype = BUS_SPI, + .manufacture_id = EON_ID_NOPREFIX, + .model_id = EON_EN25F05, + .total_size = 64, + .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, + .tested = TEST_OK_PREW, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 16} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {32 * 1024, 2} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {32 * 1024, 2} }, + .block_erase = spi_block_erase_52, + }, { + .eraseblocks = { {64 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {64 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_256, + .read = spi_chip_read, + .voltage = {2700, 3600}, + }, + + { + .vendor = "Eon", + .name = "EN25F10", + .bustype = BUS_SPI, + .manufacture_id = EON_ID_NOPREFIX, + .model_id = EON_EN25F10, + .total_size = 128, + .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 32} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {32 * 1024, 4} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {32 * 1024, 4} }, + .block_erase = spi_block_erase_52, + }, { + .eraseblocks = { {128 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {128 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_256, + .read = spi_chip_read, + .voltage = {2700, 3600}, + }, + + { + .vendor = "Eon", + .name = "EN25F20", + .bustype = BUS_SPI, + .manufacture_id = EON_ID_NOPREFIX, + .model_id = EON_EN25F20, + .total_size = 256, + .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 64} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {64 * 1024, 4} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {64 * 1024, 4} }, + .block_erase = spi_block_erase_52, + }, { + .eraseblocks = { {256 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {256 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_256, + .read = spi_chip_read, + .voltage = {2700, 3600}, + }, + + { + .vendor = "Eon", + .name = "EN25F40", + .bustype = BUS_SPI, + .manufacture_id = EON_ID_NOPREFIX, + .model_id = EON_EN25F40, + .total_size = 512, + .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, + .tested = TEST_OK_PROBE, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 128} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {64 * 1024, 8} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {512 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {512 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + }, + }, + .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_256, + .read = spi_chip_read, + .voltage = {2700, 3600}, + }, + + { + .vendor = "Eon", + .name = "EN25F80", + .bustype = BUS_SPI, + .manufacture_id = EON_ID_NOPREFIX, + .model_id = EON_EN25F80, + .total_size = 1024, + .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, + .tested = TEST_OK_PREW, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 256} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {64 * 1024, 16} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {1024 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {1024 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_256, + .read = spi_chip_read, + .voltage = {2700, 3600}, + }, + + { + .vendor = "Eon", + .name = "EN25F16", + .bustype = BUS_SPI, + .manufacture_id = EON_ID_NOPREFIX, + .model_id = EON_EN25F16, + .total_size = 2048, + .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, + .tested = TEST_OK_PREW, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 512} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {64 * 1024, 32} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {2 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {2 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_256, + .read = spi_chip_read, + .voltage = {2700, 3600}, + }, + + { + .vendor = "Eon", + .name = "EN25F32", + .bustype = BUS_SPI, + .manufacture_id = EON_ID_NOPREFIX, + .model_id = EON_EN25F32, + .total_size = 4096, + .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 1024} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {64 * 1024, 64} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {4 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {4 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_256, + .read = spi_chip_read, + .voltage = {2700, 3600}, + }, + + { + .vendor = "Eon", + .name = "EN25F64", + .bustype = BUS_SPI, + .manufacture_id = EON_ID_NOPREFIX, + .model_id = EON_EN25F64, + .total_size = 8192, + .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, + .tested = TEST_OK_PREW, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 2048} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {64 * 1024, 128} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {8 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {8 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_256, + .read = spi_chip_read, + .voltage = {2700, 3600}, + }, + + { + .vendor = "Eon", + .name = "EN25Q40", + .bustype = BUS_SPI, + .manufacture_id = EON_ID_NOPREFIX, + .model_id = EON_EN25Q40, + .total_size = 512, + .page_size = 256, + /* OTP: 256B total; enter 0x3A */ + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 128} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {64 * 1024, 8} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {512 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {512 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_256, + .read = spi_chip_read, + .voltage = {2700, 3600}, + }, + + { + .vendor = "Eon", + .name = "EN25Q80(A)", + .bustype = BUS_SPI, + .manufacture_id = EON_ID_NOPREFIX, + .model_id = EON_EN25Q80, + .total_size = 1024, + .page_size = 256, + /* OTP: 256B total; enter 0x3A */ + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 256} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {64 * 1024, 16} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {1024 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {1024 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_256, + .read = spi_chip_read, + .voltage = {2700, 3600}, + }, + + { + /* Note: EN25D16 is an evil twin which shares the model ID + but has different write protection capabilities */ + .vendor = "Eon", + .name = "EN25Q16", + .bustype = BUS_SPI, + .manufacture_id = EON_ID_NOPREFIX, + .model_id = EON_EN25Q16, + .total_size = 2048, + .page_size = 256, + /* OTP: D16 512B/Q16 128B total; enter 0x3A */ + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 512} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {64 * 1024, 32} }, + .block_erase = spi_block_erase_d8, + }, { + /* not supported by Q16 version */ + .eraseblocks = { {64 * 1024, 32} }, + .block_erase = spi_block_erase_52, + }, { + .eraseblocks = { {2 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {2 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_256, + .read = spi_chip_read, + .voltage = {2700, 3600}, + }, + + { + .vendor = "Eon", + .name = "EN25Q32(A/B)", + .bustype = BUS_SPI, + .manufacture_id = EON_ID_NOPREFIX, + .model_id = EON_EN25Q32, + .total_size = 4096, + .page_size = 256, + /* OTP: 512B total; enter 0x3A */ + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, + .tested = TEST_OK_PREW, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 1024} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {64 * 1024, 64} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {4 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {4 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_256, + .read = spi_chip_read, + .voltage = {2700, 3600}, + }, + + { + .vendor = "Eon", + .name = "EN25Q64", + .bustype = BUS_SPI, + .manufacture_id = EON_ID_NOPREFIX, + .model_id = EON_EN25Q64, + .total_size = 8192, + .page_size = 256, + /* OTP: 512B total; enter 0x3A */ + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, + .tested = TEST_OK_PREW, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 2048} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {64 * 1024, 128} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {8 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {8 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_256, + .read = spi_chip_read, + .voltage = {2700, 3600}, + }, + + { + .vendor = "Eon", + .name = "EN25Q128", + .bustype = BUS_SPI, + .manufacture_id = EON_ID_NOPREFIX, + .model_id = EON_EN25Q128, + .total_size = 16384, + .page_size = 256, + /* OTP: 512B total; enter 0x3A */ + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 4096} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {64 * 1024, 256} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {16 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {16 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_256, + .read = spi_chip_read, + }, + + { + .vendor = "Eon", + .name = "EN25QH16", + .bustype = BUS_SPI, + .manufacture_id = EON_ID_NOPREFIX, + .model_id = EON_EN25QH16, + .total_size = 2048, + .page_size = 256, + /* supports SFDP */ + /* OTP: 512B total; enter 0x3A */ + /* QPI enable 0x38, disable 0xFF */ + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_QPI, + .tested = TEST_OK_PR, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 512} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {64 * 1024, 32} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {1024 * 2048, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {1024 * 2048, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_bp3_srwd, /* bit6 is quad enable */ + .unlock = spi_disable_blockprotect_bp3_srwd, + .write = spi_chip_write_256, + .read = spi_chip_read, + .voltage = {2700, 3600}, + }, + + { + .vendor = "Eon", + .name = "EN25QH32", + .bustype = BUS_SPI, + .manufacture_id = EON_ID_NOPREFIX, + .model_id = EON_EN25QH32, + .total_size = 4096, + .page_size = 256, + /* supports SFDP */ + /* OTP: 512B total; enter 0x3A */ + /* QPI enable 0x38, disable 0xFF */ + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_QPI, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 1024} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {64 * 1024, 64} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {1024 * 4096, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {1024 * 4096, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_bp3_srwd, /* bit6 is quad enable */ + .unlock = spi_disable_blockprotect_bp3_srwd, + .write = spi_chip_write_256, + .read = spi_chip_read, + .voltage = {2700, 3600}, + }, + + { + .vendor = "Eon", + .name = "EN25QH64", + .bustype = BUS_SPI, + .manufacture_id = EON_ID_NOPREFIX, + .model_id = EON_EN25QH64, + .total_size = 8192, + .page_size = 256, + /* supports SFDP */ + /* OTP: 512B total; enter 0x3A */ + /* QPI enable 0x38, disable 0xFF */ + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_QPI, + .tested = TEST_OK_PR, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = { + { + .eraseblocks = { {4 * 1024, 2048} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {64 * 1024, 128} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { { 8192 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { { 8192 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_bp3_srwd, /* bit6 is quad enable */ + .unlock = spi_disable_blockprotect_bp3_srwd, + .write = spi_chip_write_256, + .read = spi_chip_read, + .voltage = {2700, 3600}, + }, + + { + .vendor = "Eon", + .name = "EN25QH128", + .bustype = BUS_SPI, + .manufacture_id = EON_ID_NOPREFIX, + .model_id = EON_EN25QH128, + .total_size = 16384, + .page_size = 256, + /* supports SFDP */ + /* OTP: 512B total; enter 0x3A */ + /* QPI enable 0x38, disable 0xFF */ + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_QPI, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = { + { + .eraseblocks = { {4 * 1024, 4096} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {64 * 1024, 256} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { { 16384 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { { 16384 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_bp3_srwd, /* bit6 is quad enable */ + .unlock = spi_disable_blockprotect_bp3_srwd, + .write = spi_chip_write_256, + .read = spi_chip_read, + .voltage = {2700, 3600}, + }, + + { + .vendor = "Eon", + .name = "EN25S10", + .bustype = BUS_SPI, + .manufacture_id = EON_ID_NOPREFIX, + .model_id = EON_EN25S10, + .total_size = 128, + .page_size = 256, + /* OTP: 256B total; enter 0x3A */ + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = { + { + .eraseblocks = { {4 * 1024, 32} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {32 * 1024, 4} }, + .block_erase = spi_block_erase_52, + }, { + .eraseblocks = { {128 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {128 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_bp2_srwd, + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_256, + .read = spi_chip_read, + .voltage = {1650, 1950}, + }, + + { + .vendor = "Eon", + .name = "EN25S20", + .bustype = BUS_SPI, + .manufacture_id = EON_ID_NOPREFIX, + .model_id = EON_EN25S20, + .total_size = 256, + .page_size = 256, + /* OTP: 256B total; enter 0x3A */ + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = { + { + .eraseblocks = { {4 * 1024, 64} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {64 * 1024, 4} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {256 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {256 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_bp2_srwd, + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_256, + .read = spi_chip_read, + .voltage = {1650, 1950}, + }, + + { + .vendor = "Eon", + .name = "EN25S40", + .bustype = BUS_SPI, + .manufacture_id = EON_ID_NOPREFIX, + .model_id = EON_EN25S40, + .total_size = 512, + .page_size = 256, + /* OTP: 256B total; enter 0x3A */ + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = { + { + .eraseblocks = { {4 * 1024, 128} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {64 * 1024, 8} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {512 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {512 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_bp2_srwd, + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_256, + .read = spi_chip_read, + .voltage = {1650, 1950}, + }, + + { + .vendor = "Eon", + .name = "EN25S80", + .bustype = BUS_SPI, + .manufacture_id = EON_ID_NOPREFIX, + .model_id = EON_EN25S80, + .total_size = 1024, + .page_size = 256, + /* OTP: 256B total; enter 0x3A */ + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = { + { + .eraseblocks = { {4 * 1024, 256} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {64 * 1024, 16} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {1024 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {1024 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_bp2_srwd, + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_256, + .read = spi_chip_read, + .voltage = {1650, 1950}, + }, + + { + .vendor = "Eon", + .name = "EN25S16", + .bustype = BUS_SPI, + .manufacture_id = EON_ID_NOPREFIX, + .model_id = EON_EN25S16, + .total_size = 2048, + .page_size = 256, + /* OTP: 512B total; enter 0x3A */ + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_QPI, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = { + { + .eraseblocks = { {4 * 1024, 512} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {64 * 1024, 32} }, + .block_erase = spi_block_erase_52, + }, { + .eraseblocks = { {32 * 1024, 64} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {2048 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {2048 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_en25s_wp, + .unlock = spi_disable_blockprotect_bp3_srwd, + .write = spi_chip_write_256, + .read = spi_chip_read, + .voltage = {1650, 1950}, + }, + + { + .vendor = "Eon", + .name = "EN25S32", + .bustype = BUS_SPI, + .manufacture_id = EON_ID_NOPREFIX, + .model_id = EON_EN25S32, + .total_size = 4096, + .page_size = 256, + /* OTP: 512B total; enter 0x3A */ + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_QPI, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = { + { + .eraseblocks = { {4 * 1024, 1024} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {32 * 1024, 128} }, + .block_erase = spi_block_erase_52, + }, { + .eraseblocks = { {64 * 1024, 64} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {4096 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {4096 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_en25s_wp, + .unlock = spi_disable_blockprotect_bp3_srwd, + .write = spi_chip_write_256, + .read = spi_chip_read, + .voltage = {1650, 1950}, + }, + + { + .vendor = "Eon", + .name = "EN25S64", + .bustype = BUS_SPI, + .manufacture_id = EON_ID_NOPREFIX, + .model_id = EON_EN25S64, + .total_size = 8192, + .page_size = 256, + /* OTP: 512B total; enter 0x3A */ + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_QPI, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = { + { + .eraseblocks = { {4 * 1024, 2048} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {64 * 1024, 128} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {8192 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {8192 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_en25s_wp, + .unlock = spi_disable_blockprotect_bp3_srwd, + .write = spi_chip_write_256, + .read = spi_chip_read, + .voltage = {1650, 1950}, + }, + + { + .vendor = "Eon", + .name = "EN29F010", + .bustype = BUS_PARALLEL, + .manufacture_id = EON_ID, + .model_id = EON_EN29F010, + .total_size = 128, + .page_size = 128, + .feature_bits = FEATURE_ADDR_2AA | FEATURE_EITHER_RESET, + .tested = TEST_OK_PRE, + .probe = probe_jedec, + .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ + .block_erasers = + { + { + .eraseblocks = { {16 * 1024, 8} }, + .block_erase = erase_sector_jedec, + }, + { + .eraseblocks = { {128 * 1024, 1} }, + .block_erase = erase_chip_block_jedec, + }, + }, + .write = write_jedec_1, + .read = read_memmapped, + .voltage = {4500, 5500}, + }, + + { + .vendor = "Eon", + .name = "EN29F002(A)(N)B", + .bustype = BUS_PARALLEL, + .manufacture_id = EON_ID, + .model_id = EON_EN29F002B, + .total_size = 256, + .page_size = 256, + .feature_bits = FEATURE_ADDR_AAA | FEATURE_EITHER_RESET, + .tested = TEST_OK_PR, + .probe = probe_jedec, + .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ + .block_erasers = + { + { + .eraseblocks = { + {16 * 1024, 1}, + {8 * 1024, 2}, + {32 * 1024, 1}, + {64 * 1024, 3}, + }, + .block_erase = erase_sector_jedec, + }, { + .eraseblocks = { {256 * 1024, 1} }, + .block_erase = erase_chip_block_jedec, + }, + }, + .write = write_jedec_1, + .read = read_memmapped, + .voltage = {4500, 5500}, + }, + + { + .vendor = "Eon", + .name = "EN29F002(A)(N)T", + .bustype = BUS_PARALLEL, + .manufacture_id = EON_ID, + .model_id = EON_EN29F002T, + .total_size = 256, + .page_size = 256, + .feature_bits = FEATURE_ADDR_AAA | FEATURE_EITHER_RESET, + .tested = TEST_OK_PREW, + .probe = probe_jedec, + .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ + .block_erasers = + { + { + .eraseblocks = { + {64 * 1024, 3}, + {32 * 1024, 1}, + {8 * 1024, 2}, + {16 * 1024, 1}, + }, + .block_erase = erase_sector_jedec, + }, { + .eraseblocks = { {256 * 1024, 1} }, + .block_erase = erase_chip_block_jedec, + }, + }, + .write = write_jedec_1, + .read = read_memmapped, + .voltage = {4500, 5500}, + }, + + { + .vendor = "Eon", + .name = "EN29LV640B", + .bustype = BUS_PARALLEL, + .manufacture_id = EON_ID, + .model_id = EON_EN29LV640B, + .total_size = 8192, + .page_size = 8192, + .feature_bits = 0, + .tested = TEST_OK_PREW, + .probe = probe_en29lv640b, + .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ + .block_erasers = + { + { + .eraseblocks = { + {8 * 1024, 8}, + {64 * 1024, 127}, + }, + .block_erase = erase_block_shifted_jedec, + }, { + .eraseblocks = { {8 * 1024 * 1024, 1} }, + .block_erase = erase_chip_block_shifted_jedec, + }, + }, + .write = write_en29lv640b, + .read = read_memmapped, + .voltage = {2700, 3600}, + }, + + { + .vendor = "Fujitsu", + .name = "MBM29F004BC", + .bustype = BUS_PARALLEL, + .manufacture_id = FUJITSU_ID, + .model_id = FUJITSU_MBM29F004BC, + .total_size = 512, + .page_size = 64 * 1024, + .feature_bits = FEATURE_ADDR_2AA | FEATURE_EITHER_RESET, + .tested = TEST_UNTESTED, + .probe = probe_jedec, + .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ + .block_erasers = + { + { + .eraseblocks = { + {16 * 1024, 1}, + {8 * 1024, 2}, + {32 * 1024, 1}, + {64 * 1024, 7}, + }, + .block_erase = erase_sector_jedec, + }, { + .eraseblocks = { {512 * 1024, 1} }, + .block_erase = erase_chip_block_jedec, + }, + }, + .write = NULL, + .read = read_memmapped, + .voltage = {4500, 5500}, + }, + + { + .vendor = "Fujitsu", + .name = "MBM29F004TC", + .bustype = BUS_PARALLEL, + .manufacture_id = FUJITSU_ID, + .model_id = FUJITSU_MBM29F004TC, + .total_size = 512, + .page_size = 64 * 1024, + .feature_bits = FEATURE_ADDR_2AA | FEATURE_EITHER_RESET, + .tested = TEST_UNTESTED, + .probe = probe_jedec, + .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ + .block_erasers = + { + { + .eraseblocks = { + {64 * 1024, 7}, + {32 * 1024, 1}, + {8 * 1024, 2}, + {16 * 1024, 1}, + }, + .block_erase = erase_sector_jedec, + }, { + .eraseblocks = { {512 * 1024, 1} }, + .block_erase = erase_chip_block_jedec, + }, + }, + .write = NULL, + .read = read_memmapped, + .voltage = {4500, 5500}, + }, + + { + /* FIXME: this has WORD/BYTE sequences; 2AA for word, 555 for byte */ + .vendor = "Fujitsu", + .name = "MBM29F400BC", + .bustype = BUS_PARALLEL, + .manufacture_id = FUJITSU_ID, + .model_id = FUJITSU_MBM29F400BC, + .total_size = 512, + .page_size = 64 * 1024, + .feature_bits = FEATURE_ADDR_SHIFTED | FEATURE_EITHER_RESET, + .tested = TEST_UNTESTED, + .probe = probe_m29f400bt, + .probe_timing = TIMING_IGNORED, /* routine doesn't use probe_timing (m29f400bt.c) */ + .block_erasers = + { + { + .eraseblocks = { + {16 * 1024, 1}, + {8 * 1024, 2}, + {32 * 1024, 1}, + {64 * 1024, 7}, + }, + .block_erase = erase_block_shifted_jedec, + }, { + .eraseblocks = { {512 * 1024, 1} }, + .block_erase = erase_chip_block_shifted_jedec, + }, + }, + .write = write_m29f400bt, + .read = read_memmapped, + .voltage = {4750, 5250}, /* 4.75-5.25V for type -55, others 4.5-5.5V */ + }, + + { + .vendor = "Fujitsu", + .name = "MBM29F400TC", + .bustype = BUS_PARALLEL, + .manufacture_id = FUJITSU_ID, + .model_id = FUJITSU_MBM29F400TC, + .total_size = 512, + .page_size = 64 * 1024, + .feature_bits = FEATURE_ADDR_SHIFTED | FEATURE_EITHER_RESET, + .tested = TEST_UNTESTED, + .probe = probe_m29f400bt, + .probe_timing = TIMING_IGNORED, /* routine doesn't use probe_timing (m29f400bt.c) */ + .block_erasers = + { + { + .eraseblocks = { + {64 * 1024, 7}, + {32 * 1024, 1}, + {8 * 1024, 2}, + {16 * 1024, 1}, + }, + .block_erase = erase_block_shifted_jedec, + }, { + .eraseblocks = { {512 * 1024, 1} }, + .block_erase = erase_chip_block_shifted_jedec, + }, + }, + .write = write_m29f400bt, + .read = read_memmapped, + .voltage = {4750, 5250}, /* 4.75-5.25V for type -55, others 4.5-5.5V */ + }, + + { + .vendor = "Fujitsu", + .name = "MBM29LV160BE", + .bustype = BUS_PARALLEL, + .manufacture_id = FUJITSU_ID, + .model_id = FUJITSU_MBM29LV160BE, + .total_size = 2 * 1024, + .page_size = 0, + .feature_bits = FEATURE_ADDR_SHIFTED | FEATURE_SHORT_RESET, + .tested = TEST_UNTESTED, + .probe = probe_m29f400bt, + .probe_timing = TIMING_IGNORED, + .block_erasers = + { + { + .eraseblocks = { + {16 * 1024, 1}, + {8 * 1024, 2}, + {32 * 1024, 1}, + {64 * 1024, 31}, + }, + .block_erase = erase_block_shifted_jedec, + }, { + .eraseblocks = { {2048 * 1024, 1} }, + .block_erase = erase_chip_block_shifted_jedec, + }, + }, + .write = write_m29f400bt, /* Supports a fast mode too */ + .read = read_memmapped, + .voltage = {3000, 3600}, /* 3.0-3.6V for type -70, others 2.7-3.6V */ + }, + + { + .vendor = "Fujitsu", + .name = "MBM29LV160TE", + .bustype = BUS_PARALLEL, + .manufacture_id = FUJITSU_ID, + .model_id = FUJITSU_MBM29LV160TE, + .total_size = 2 * 1024, + .page_size = 0, + .feature_bits = FEATURE_ADDR_SHIFTED | FEATURE_SHORT_RESET, + .tested = TEST_UNTESTED, + .probe = probe_m29f400bt, + .probe_timing = TIMING_IGNORED, + .block_erasers = + { + { + .eraseblocks = { + {64 * 1024, 31}, + {32 * 1024, 1}, + {8 * 1024, 2}, + {16 * 1024, 1}, + }, + .block_erase = erase_block_shifted_jedec, + }, { + .eraseblocks = { {2048 * 1024, 1} }, + .block_erase = erase_chip_block_shifted_jedec, + }, + }, + .write = write_m29f400bt, /* Supports a fast mode too */ + .read = read_memmapped, + .voltage = {3000, 3600}, /* 3.0-3.6V for type -70, others 2.7-3.6V */ + }, + + { + .vendor = "GigaDevice", + .name = "GD25LQ32", + .bustype = BUS_SPI, + .manufacture_id = GIGADEVICE_ID, + .model_id = GIGADEVICE_GD25LQ32, + .total_size = 4096, + .page_size = 256, + /* OTP: 1024B total, 256B reserved; read 0x48; write 0x42, erase 0x44 */ + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, + .tested = TEST_OK_PREW, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 1024} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {32 * 1024, 128} }, + .block_erase = spi_block_erase_52, + }, { + .eraseblocks = { {64 * 1024, 64} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {4 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {4 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_bp4_srwd, + .unlock = spi_disable_blockprotect_bp4_srwd, /* TODO: 2nd status reg (read with 0x35) */ + .write = spi_chip_write_256, + .read = spi_chip_read, + .voltage = {1700, 1950}, + }, + + { + .vendor = "GigaDevice", + .name = "GD25Q512", + .bustype = BUS_SPI, + .manufacture_id = GIGADEVICE_ID, + .model_id = GIGADEVICE_GD25Q512, + .total_size = 64, + .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = { + { + .eraseblocks = { {4 * 1024, 16} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {32 * 1024, 2} }, + .block_erase = spi_block_erase_52, + }, { + .eraseblocks = { {64 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {64 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_bp4_srwd, + .unlock = spi_disable_blockprotect_bp4_srwd, /* TODO: 2nd status reg (read with 0x35) */ + .write = spi_chip_write_256, + .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ + .voltage = {2700, 3600}, + }, + + { + .vendor = "GigaDevice", + .name = "GD25Q10", + .bustype = BUS_SPI, + .manufacture_id = GIGADEVICE_ID, + .model_id = GIGADEVICE_GD25Q10, + .total_size = 128, + .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = { + { + .eraseblocks = { {4 * 1024, 32} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {32 * 1024, 4} }, + .block_erase = spi_block_erase_52, + }, { + .eraseblocks = { {64 * 1024, 2} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {128 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {128 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_bp4_srwd, + .unlock = spi_disable_blockprotect_bp4_srwd, /* TODO: 2nd status reg (read with 0x35) */ + .write = spi_chip_write_256, + .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ + .voltage = {2700, 3600}, + }, + + { + .vendor = "GigaDevice", + .name = "GD25Q20(B)", + .bustype = BUS_SPI, + .manufacture_id = GIGADEVICE_ID, + .model_id = GIGADEVICE_GD25Q20, + .total_size = 256, + .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 64} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {32 * 1024, 8} }, + .block_erase = spi_block_erase_52, + }, { + .eraseblocks = { {64 * 1024, 4} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {256 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {256 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_bp4_srwd, + .unlock = spi_disable_blockprotect_bp4_srwd, /* TODO: 2nd status reg (read with 0x35) */ + .write = spi_chip_write_256, + .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ + .voltage = {2700, 3600}, + }, + + { + .vendor = "GigaDevice", + .name = "GD25Q40(B)", + .bustype = BUS_SPI, + .manufacture_id = GIGADEVICE_ID, + .model_id = GIGADEVICE_GD25Q40, + .total_size = 512, + .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 128} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {32 * 1024, 16} }, + .block_erase = spi_block_erase_52, + }, { + .eraseblocks = { {64 * 1024, 8} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {512 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {512 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_bp4_srwd, + .unlock = spi_disable_blockprotect_bp4_srwd, /* TODO: 2nd status reg (read with 0x35) */ + .write = spi_chip_write_256, + .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ + .voltage = {2700, 3600}, + }, + + { + .vendor = "GigaDevice", + .name = "GD25Q80(B)", + .bustype = BUS_SPI, + .manufacture_id = GIGADEVICE_ID, + .model_id = GIGADEVICE_GD25Q80, + .total_size = 1024, + .page_size = 256, + /* OTP: 1024B total, 256B reserved; read 0x48; write 0x42, erase 0x44 (B version only) */ + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, + .tested = TEST_OK_PREW, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 256} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {32 * 1024, 32} }, + .block_erase = spi_block_erase_52, + }, { + .eraseblocks = { {64 * 1024, 16} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {1024 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {1024 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_bp4_srwd, + .unlock = spi_disable_blockprotect_bp4_srwd, /* TODO: 2nd status reg (read with 0x35) */ + .write = spi_chip_write_256, + .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ + .voltage = {2700, 3600}, + }, + + { + .vendor = "GigaDevice", + .name = "GD25Q16(B)", + .bustype = BUS_SPI, + .manufacture_id = GIGADEVICE_ID, + .model_id = GIGADEVICE_GD25Q16, + .total_size = 2048, + .page_size = 256, + /* OTP: 1024B total, 256B reserved; read 0x48; write 0x42, erase 0x44 (B version only) */ + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 512} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {32 * 1024, 64} }, + .block_erase = spi_block_erase_52, + }, { + .eraseblocks = { {64 * 1024, 32} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {2 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {2 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_bp4_srwd, + .unlock = spi_disable_blockprotect_bp4_srwd, /* TODO: 2nd status reg (read with 0x35) */ + .write = spi_chip_write_256, + .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ + .voltage = {2700, 3600}, + }, + + { + .vendor = "GigaDevice", + .name = "GD25Q32(B)", + .bustype = BUS_SPI, + .manufacture_id = GIGADEVICE_ID, + .model_id = GIGADEVICE_GD25Q32, + .total_size = 4096, + .page_size = 256, + /* OTP: 1024B total, 256B reserved; read 0x48; write 0x42, erase 0x44 */ + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, + .tested = TEST_OK_PREW, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 1024} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {32 * 1024, 128} }, + .block_erase = spi_block_erase_52, + }, { + .eraseblocks = { {64 * 1024, 64} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {4 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {4 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_bp4_srwd, + .unlock = spi_disable_blockprotect_bp4_srwd, /* TODO: 2nd status reg (read with 0x35) */ + .write = spi_chip_write_256, + .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ + .voltage = {2700, 3600}, + }, + + { + .vendor = "GigaDevice", + .name = "GD25Q64(B)", + .bustype = BUS_SPI, + .manufacture_id = GIGADEVICE_ID, + .model_id = GIGADEVICE_GD25Q64, + .total_size = 8192, + .page_size = 256, + /* OTP: 1024B total, 256B reserved; read 0x48; write 0x42, erase 0x44 */ + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, + .tested = TEST_OK_PREW, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 2048} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {32 * 1024, 256} }, + .block_erase = spi_block_erase_52, + }, { + .eraseblocks = { {64 * 1024, 128} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {8 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {8 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_bp4_srwd, + .unlock = spi_disable_blockprotect_bp4_srwd, /* TODO: 2nd status reg (read with 0x35) */ + .write = spi_chip_write_256, + .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ + .voltage = {2700, 3600}, + }, + + { + .vendor = "GigaDevice", + .name = "GD25Q128B", + .bustype = BUS_SPI, + .manufacture_id = GIGADEVICE_ID, + .model_id = GIGADEVICE_GD25Q128, + .total_size = 16384, + .page_size = 256, + /* OTP: 1024B total, 256B reserved; read 0x48; write 0x42, erase 0x44 */ + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 4096} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {32 * 1024, 512} }, + .block_erase = spi_block_erase_52, + }, { + .eraseblocks = { {64 * 1024, 256} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {16 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {16 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_bp4_srwd, + .unlock = spi_disable_blockprotect_bp4_srwd, /* TODO: 2nd status reg (read with 0x35) */ + .write = spi_chip_write_256, + .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ + .voltage = {2700, 3600}, + }, + + { + .vendor = "GigaDevice", + .name = "GD25T80", + .bustype = BUS_SPI, + .manufacture_id = GIGADEVICE_ID, + .model_id = GIGADEVICE_GD25T80, + .total_size = 1024, + .page_size = 256, + /* OTP: 256B total; enter 0x3A */ + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = { + { + .eraseblocks = { {4 * 1024, 256} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {64 * 1024, 16} }, + .block_erase = spi_block_erase_52, + }, { + .eraseblocks = { {64 * 1024, 16} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {1024 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {1024 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_256, + .read = spi_chip_read, + .voltage = {2700, 3600}, + }, + + { + .vendor = "Hyundai", + .name = "HY29F002T", + .bustype = BUS_PARALLEL, + .manufacture_id = HYUNDAI_ID, + .model_id = HYUNDAI_HY29F002T, + .total_size = 256, + .page_size = 256 * 1024, + .feature_bits = FEATURE_EITHER_RESET, /* Some revisions may need FEATURE_ADDR_2AA */ + .tested = TEST_OK_PRE, + .probe = probe_jedec, + .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ + .block_erasers = + { + { + .eraseblocks = { + {64 * 1024, 3}, + {32 * 1024, 1}, + {8 * 1024, 2}, + {16 * 1024, 1}, + }, + .block_erase = erase_sector_jedec, + }, { + .eraseblocks = { {256 * 1024, 1} }, + .block_erase = erase_chip_block_jedec, + }, + }, + .write = write_jedec_1, + .read = read_memmapped, + .voltage = {4750, 5250}, /* 4.75-5.25V for type -45, others 4.5-5.5V */ + }, + + { + .vendor = "Hyundai", + .name = "HY29F002B", + .bustype = BUS_PARALLEL, + .manufacture_id = HYUNDAI_ID, + .model_id = HYUNDAI_HY29F002B, + .total_size = 256, + .page_size = 256 * 1024, + .feature_bits = FEATURE_EITHER_RESET, /* Some revisions may need FEATURE_ADDR_2AA */ + .tested = TEST_UNTESTED, + .probe = probe_jedec, + .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ + .block_erasers = + { + { + .eraseblocks = { + {16 * 1024, 1}, + {8 * 1024, 2}, + {32 * 1024, 1}, + {64 * 1024, 3}, + }, + .block_erase = erase_sector_jedec, + }, { + .eraseblocks = { {256 * 1024, 1} }, + .block_erase = erase_chip_block_jedec, + }, + }, + .write = write_jedec_1, + .read = read_memmapped, + .voltage = {4750, 5250}, /* 4.75-5.25V for type -45, others 4.5-5.5V */ + }, + + { + .vendor = "Hyundai", + .name = "HY29F040A", + .bustype = BUS_PARALLEL, + .manufacture_id = HYUNDAI_ID, + .model_id = HYUNDAI_HY29F040A, + .total_size = 512, + .page_size = 64 * 1024, + .feature_bits = FEATURE_ADDR_2AA | FEATURE_EITHER_RESET, + .tested = TEST_UNTESTED, + .probe = probe_jedec, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {64 * 1024, 8} }, + .block_erase = erase_sector_jedec, + }, { + .eraseblocks = { {512 * 1024, 1} }, + .block_erase = erase_chip_block_jedec, + }, + }, + .write = write_jedec_1, + .read = read_memmapped, + .voltage = {4500, 5500}, + }, + + { + .vendor = "Intel", + .name = "25F160S33B8", + .bustype = BUS_SPI, + .manufacture_id = INTEL_ID, + .model_id = INTEL_25F160S33B8, + .total_size = 2048, + .page_size = 256, + /* OTP: 506B total (2x 8B, 30x 16B, 1x 10B); read 0x4B; write 0x42 */ + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + /* This chip supports erasing of the 8 so-called "parameter blocks" with + * opcode 0x40. Trying to access an address outside these 8 8kB blocks does + * have no effect on the memory contents, but sets a flag in the SR. + .eraseblocks = { + {8 * 1024, 8}, + {64 * 1024, 31} // inaccessible + }, + .block_erase = spi_block_erase_40, + }, { */ + .eraseblocks = { {64 * 1024, 32} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {2 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_bp2_ep_srwd, + .unlock = spi_disable_blockprotect_bp2_ep_srwd, + .write = spi_chip_write_256, + .read = spi_chip_read, /* also fast read 0x0B */ + .voltage = {2700, 3600}, + }, + + { + .vendor = "Intel", + .name = "25F160S33T8", + .bustype = BUS_SPI, + .manufacture_id = INTEL_ID, + .model_id = INTEL_25F160S33T8, + .total_size = 2048, + .page_size = 256, + /* OTP: 506B total (2x 8B, 30x 16B, 1x 10B); read 0x4B; write 0x42 */ + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + /* This chip supports erasing of the 8 so-called "parameter blocks" with + * opcode 0x40. Trying to access an address outside these 8 8kB blocks does + * have no effect on the memory contents, but sets a flag in the SR. + .eraseblocks = { + {64 * 1024, 31}, // inaccessible + {8 * 1024, 8} + }, + .block_erase = spi_block_erase_40, + }, { */ + .eraseblocks = { {64 * 1024, 32} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {2 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_bp2_ep_srwd, + .unlock = spi_disable_blockprotect_bp2_ep_srwd, + .write = spi_chip_write_256, + .read = spi_chip_read, /* also fast read 0x0B */ + .voltage = {2700, 3600}, + }, + + { + .vendor = "Intel", + .name = "25F320S33B8", + .bustype = BUS_SPI, + .manufacture_id = INTEL_ID, + .model_id = INTEL_25F320S33B8, + .total_size = 4096, + .page_size = 256, + /* OTP: 506B total (2x 8B, 30x 16B, 1x 10B); read 0x4B; write 0x42 */ + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + /* This chip supports erasing of the 8 so-called "parameter blocks" with + * opcode 0x40. Trying to access an address outside these 8 8kB blocks does + * have no effect on the memory contents, but sets a flag in the SR. + .eraseblocks = { + {8 * 1024, 8}, + {64 * 1024, 63} // inaccessible + }, + .block_erase = spi_block_erase_40, + }, { */ + .eraseblocks = { {64 * 1024, 64} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {4 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_bp2_ep_srwd, + .unlock = spi_disable_blockprotect_bp2_ep_srwd, + .write = spi_chip_write_256, + .read = spi_chip_read, /* also fast read 0x0B */ + .voltage = {2700, 3600}, + }, + + { + .vendor = "Intel", + .name = "25F320S33T8", + .bustype = BUS_SPI, + .manufacture_id = INTEL_ID, + .model_id = INTEL_25F320S33T8, + .total_size = 4096, + .page_size = 256, + /* OTP: 506B total (2x 8B, 30x 16B, 1x 10B); read 0x4B; write 0x42 */ + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + /* This chip supports erasing of the 8 so-called "parameter blocks" with + * opcode 0x40. Trying to access an address outside these 8 8kB blocks does + * have no effect on the memory contents, but sets a flag in the SR. + .eraseblocks = { + {64 * 1024, 63}, // inaccessible + {8 * 1024, 8} + }, + .block_erase = spi_block_erase_40, + }, { */ + .eraseblocks = { {64 * 1024, 64} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {4 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_bp2_ep_srwd, + .unlock = spi_disable_blockprotect_bp2_ep_srwd, + .write = spi_chip_write_256, + .read = spi_chip_read, /* also fast read 0x0B */ + .voltage = {2700, 3600}, + }, + + { + .vendor = "Intel", + .name = "25F640S33B8", + .bustype = BUS_SPI, + .manufacture_id = INTEL_ID, + .model_id = INTEL_25F640S33B8, + .total_size = 8192, + .page_size = 256, + /* OTP: 506B total (2x 8B, 30x 16B, 1x 10B); read 0x4B; write 0x42 */ + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + /* This chip supports erasing of the 8 so-called "parameter blocks" with + * opcode 0x40. Trying to access an address outside these 8 8kB blocks does + * have no effect on the memory contents, but sets a flag in the SR. + .eraseblocks = { + {8 * 1024, 8}, + {64 * 1024, 127} // inaccessible + }, + .block_erase = spi_block_erase_40, + }, { */ + .eraseblocks = { {64 * 1024, 128} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {8 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_bp2_ep_srwd, + .unlock = spi_disable_blockprotect_bp2_ep_srwd, + .write = spi_chip_write_256, + .read = spi_chip_read, /* also fast read 0x0B */ + .voltage = {2700, 3600}, + }, + + { + .vendor = "Intel", + .name = "25F640S33T8", + .bustype = BUS_SPI, + .manufacture_id = INTEL_ID, + .model_id = INTEL_25F640S33T8, + .total_size = 8192, + .page_size = 256, + /* OTP: 506B total (2x 8B, 30x 16B, 1x 10B); read 0x4B; write 0x42 */ + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + /* This chip supports erasing of the 8 so-called "parameter blocks" with + * opcode 0x40. Trying to access an address outside these 8 8kB blocks does + * have no effect on the memory contents, but sets a flag in the SR. + .eraseblocks = { + {64 * 1024, 127}, // inaccessible + {8 * 1024, 8} + }, + .block_erase = spi_block_erase_40, + }, { */ + .eraseblocks = { {64 * 1024, 128} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {8 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_bp2_ep_srwd, + .unlock = spi_disable_blockprotect_bp2_ep_srwd, + .write = spi_chip_write_256, + .read = spi_chip_read, /* also fast read 0x0B */ + .voltage = {2700, 3600}, + }, + + { + .vendor = "Intel", + .name = "28F001BN/BX-B", + .bustype = BUS_PARALLEL, + .manufacture_id = INTEL_ID, + .model_id = INTEL_28F001B, + .total_size = 128, + .page_size = 128 * 1024, /* 8k + 2x4k + 112k */ + .tested = TEST_UNTESTED, + .probe = probe_jedec, + .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ + .block_erasers = + { + { + .eraseblocks = { + {8 * 1024, 1}, + {4 * 1024, 2}, + {112 * 1024, 1}, + }, + .block_erase = erase_block_82802ab, + }, + }, + .write = write_82802ab, + .read = read_memmapped, + .voltage = {4500, 5500}, + }, + + { + .vendor = "Intel", + .name = "28F001BN/BX-T", + .bustype = BUS_PARALLEL, + .manufacture_id = INTEL_ID, + .model_id = INTEL_28F001T, + .total_size = 128, + .page_size = 128 * 1024, /* 112k + 2x4k + 8k */ + .tested = TEST_OK_PR, + .probe = probe_jedec, + .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ + .block_erasers = + { + { + .eraseblocks = { + {112 * 1024, 1}, + {4 * 1024, 2}, + {8 * 1024, 1}, + }, + .block_erase = erase_block_82802ab, + }, + }, + .write = write_82802ab, + .read = read_memmapped, + .voltage = {4500, 5500}, + }, + + { + .vendor = "Intel", + .name = "28F002BC/BL/BV/BX-T", + .bustype = BUS_PARALLEL, + .manufacture_id = INTEL_ID, + .model_id = INTEL_28F002T, + .total_size = 256, + .page_size = 256 * 1024, + .tested = TEST_OK_PRE, + .probe = probe_82802ab, + .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ + .block_erasers = + { + { + .eraseblocks = { + {128 * 1024, 1}, + {96 * 1024, 1}, + {8 * 1024, 2}, + {16 * 1024, 1}, + }, + .block_erase = erase_block_82802ab, + }, + }, + .write = write_82802ab, + .read = read_memmapped, + }, + + { + .vendor = "Intel", + .name = "28F008S3/S5/SC", + .bustype = BUS_PARALLEL, + .manufacture_id = INTEL_ID, + .model_id = INTEL_28F004S3, + .total_size = 512, + .page_size = 256, + .tested = TEST_UNTESTED, + .probe = probe_82802ab, + .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ + .block_erasers = + { + { + .eraseblocks = { {64 * 1024, 8} }, + .block_erase = erase_block_82802ab, + }, + }, + .unlock = unlock_28f004s5, + .write = write_82802ab, + .read = read_memmapped, + }, + + { + .vendor = "Intel", + .name = "28F004B5/BE/BV/BX-B", + .bustype = BUS_PARALLEL, + .manufacture_id = INTEL_ID, + .model_id = INTEL_28F004B, + .total_size = 512, + .page_size = 128 * 1024, /* maximal block size */ + .tested = TEST_UNTESTED, + .probe = probe_82802ab, + .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ + .block_erasers = + { + { + .eraseblocks = { + {16 * 1024, 1}, + {8 * 1024, 2}, + {96 * 1024, 1}, + {128 * 1024, 3}, + }, + .block_erase = erase_block_82802ab, + }, + }, + .write = write_82802ab, + .read = read_memmapped, + }, + + { + .vendor = "Intel", + .name = "28F004B5/BE/BV/BX-T", + .bustype = BUS_PARALLEL, + .manufacture_id = INTEL_ID, + .model_id = INTEL_28F004T, + .total_size = 512, + .page_size = 128 * 1024, /* maximal block size */ + .tested = TEST_UNTESTED, + .probe = probe_82802ab, + .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ + .block_erasers = + { + { + .eraseblocks = { + {128 * 1024, 3}, + {96 * 1024, 1}, + {8 * 1024, 2}, + {16 * 1024, 1}, + }, + .block_erase = erase_block_82802ab, + }, + }, + .write = write_82802ab, + .read = read_memmapped, + }, + + { + .vendor = "Intel", + .name = "28F400BV/BX/CE/CV-B", + .bustype = BUS_PARALLEL, + .manufacture_id = INTEL_ID, + .model_id = INTEL_28F400B, + .total_size = 512, + .page_size = 128 * 1024, /* maximal block size */ + .feature_bits = FEATURE_ADDR_SHIFTED, + .tested = TEST_UNTESTED, + .probe = probe_82802ab, + .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ + .block_erasers = + { + { + .eraseblocks = { + {16 * 1024, 1}, + {8 * 1024, 2}, + {96 * 1024, 1}, + {128 * 1024, 3}, + }, + .block_erase = erase_block_82802ab, + }, + }, + .write = write_82802ab, + .read = read_memmapped, + }, + + { + .vendor = "Intel", + .name = "28F400BV/BX/CE/CV-T", + .bustype = BUS_PARALLEL, + .manufacture_id = INTEL_ID, + .model_id = INTEL_28F400T, + .total_size = 512, + .page_size = 128 * 1024, /* maximal block size */ + .feature_bits = FEATURE_ADDR_SHIFTED, + .tested = TEST_UNTESTED, + .probe = probe_82802ab, + .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ + .block_erasers = + { + { + .eraseblocks = { + {128 * 1024, 3}, + {96 * 1024, 1}, + {8 * 1024, 2}, + {16 * 1024, 1}, + }, + .block_erase = erase_block_82802ab, + }, + }, + .write = write_82802ab, + .read = read_memmapped, + }, + + { + .vendor = "Intel", + .name = "82802AB", + .bustype = BUS_FWH, + .manufacture_id = INTEL_ID, + .model_id = INTEL_82802AB, + .total_size = 512, + .page_size = 64 * 1024, + .feature_bits = FEATURE_REGISTERMAP, + .tested = TEST_OK_PREW, + .probe = probe_82802ab, + .probe_timing = TIMING_IGNORED, /* routine does not use probe_timing (82802ab.c) */ + .block_erasers = + { + { + .eraseblocks = { {64 * 1024, 8} }, + .block_erase = erase_block_82802ab, + }, + }, + .unlock = unlock_82802ab, + .write = write_82802ab, + .read = read_memmapped, + .voltage = {3000, 3600}, + }, + + { + .vendor = "Intel", + .name = "82802AC", + .bustype = BUS_FWH, + .manufacture_id = INTEL_ID, + .model_id = INTEL_82802AC, + .total_size = 1024, + .page_size = 64 * 1024, + .feature_bits = FEATURE_REGISTERMAP, + .tested = TEST_OK_PR, + .probe = probe_82802ab, + .probe_timing = TIMING_IGNORED, /* routine does not use probe_timing (82802ab.c) */ + .block_erasers = + { + { + .eraseblocks = { {64 * 1024, 16} }, + .block_erase = erase_block_82802ab, + }, + }, + .unlock = unlock_82802ab, + .write = write_82802ab, + .read = read_memmapped, + .voltage = {3000, 3600}, + }, + + { + .vendor = "Macronix", + .name = "MX23L3254", + .bustype = BUS_SPI, + .manufacture_id = MACRONIX_ID, + .model_id = MACRONIX_MX23L3254, + .total_size = 4096, + .page_size = 256, + .tested = {.probe = OK, .read = OK, .erase = NA, .write = NA}, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .write = NULL, /* MX23L3254 is a mask ROM, so it is read-only */ + .read = spi_chip_read, /* Fast read (0x0B) supported */ + .voltage = {3000, 3600}, + }, + + { + .vendor = "Macronix", + .name = "MX25L512(E)/MX25V512(C)", + .bustype = BUS_SPI, + .manufacture_id = MACRONIX_ID, + .model_id = MACRONIX_MX25L512, + .total_size = 64, + .page_size = 256, + /* MX25L512E supports SFDP */ + .feature_bits = FEATURE_WRSR_WREN, + .tested = TEST_OK_PREW, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 16} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {64 * 1024, 1} }, + .block_erase = spi_block_erase_52, + }, { + .eraseblocks = { {64 * 1024, 1} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {64 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {64 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + }, + }, + .printlock = spi_prettyprint_status_register_bp1_srwd, + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_256, + .read = spi_chip_read, /* Fast read (0x0B) supported, MX25L512E supports dual I/O */ + .voltage = {2700, 3600}, /* 2.35-3.6V for MX25V512(C) */ + }, + + { + .vendor = "Macronix", + .name = "MX25L1005(C)/MX25L1006E", + .bustype = BUS_SPI, + .manufacture_id = MACRONIX_ID, + .model_id = MACRONIX_MX25L1005, + .total_size = 128, + .page_size = 256, + /* MX25L1006E supports SFDP */ + .feature_bits = FEATURE_WRSR_WREN, + .tested = TEST_OK_PREW, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 32} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {64 * 1024, 2} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {128 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {128 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + }, + }, + .printlock = spi_prettyprint_status_register_bp1_srwd, + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_256, + .read = spi_chip_read, /* Fast read (0x0B) supported, MX25L1006E supports dual I/O */ + .voltage = {2700, 3600}, + }, + + { + .vendor = "Macronix", + .name = "MX25L2005(C)", + .bustype = BUS_SPI, + .manufacture_id = MACRONIX_ID, + .model_id = MACRONIX_MX25L2005, + .total_size = 256, + .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, + .tested = TEST_OK_PREW, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 64} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {64 * 1024, 4} }, + .block_erase = spi_block_erase_52, + }, { + .eraseblocks = { {64 * 1024, 4} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {256 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {256 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + }, + }, + .printlock = spi_prettyprint_status_register_bp1_srwd, + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_256, + .read = spi_chip_read, /* Fast read (0x0B) supported */ + .voltage = {2700, 3600}, + }, + + { + .vendor = "Macronix", + .name = "MX25L4005(A/C)", + .bustype = BUS_SPI, + .manufacture_id = MACRONIX_ID, + .model_id = MACRONIX_MX25L4005, + .total_size = 512, + .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, + .tested = TEST_OK_PREW, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 128} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {64 * 1024, 8} }, + .block_erase = spi_block_erase_52, + }, { + .eraseblocks = { {64 * 1024, 8} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {512 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {512 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + }, + }, + .printlock = spi_prettyprint_status_register_bp2_srwd, + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_256, + .read = spi_chip_read, /* Fast read (0x0B) supported */ + .voltage = {2700, 3600}, + }, + + { + .vendor = "Macronix", + .name = "MX25L8005/MX25V8005", + .bustype = BUS_SPI, + .manufacture_id = MACRONIX_ID, + .model_id = MACRONIX_MX25L8005, + .total_size = 1024, + .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, + .tested = TEST_OK_PREW, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 256} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {64 * 1024, 16} }, + .block_erase = spi_block_erase_52, + }, { + .eraseblocks = { {64 * 1024, 16} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {1024 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {1024 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + }, + }, + .printlock = spi_prettyprint_status_register_bp2_srwd, + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_256, + .read = spi_chip_read, /* Fast read (0x0B) supported */ + .voltage = {2700, 3600}, /* 2.35-3.6V for MX25V8005 */ + }, + + { + .vendor = "Macronix", + .name = "MX25L1605D/MX25L1608D/MX25L1673E", + .bustype = BUS_SPI, + .manufacture_id = MACRONIX_ID, + .model_id = MACRONIX_MX25L1605, + .total_size = 2048, + .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, + .tested = TEST_OK_PREW, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 512} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {64 * 1024, 32} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {2 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {2 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + }, + }, + .printlock = spi_prettyprint_status_register_bp3_srwd, /* bit6: Continously Program (CP) mode */ + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_256, + .read = spi_chip_read, /* Fast read (0x0B), dual I/O supported */ + .voltage = {2700, 3600}, + }, + + { + .vendor = "Macronix", + .name = "MX25L1635D", + .bustype = BUS_SPI, + .manufacture_id = MACRONIX_ID, + .model_id = MACRONIX_MX25L1635D, + .total_size = 2048, + .page_size = 256, + /* OTP: 64B total; enter 0xB1, exit 0xC1 */ + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 512} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {64 * 1024, 32} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {2 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {2 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_bp3_srwd, /* bit6 is quad enable */ + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_256, + .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ + .voltage = {2700, 3600}, + }, + + { + .vendor = "Macronix", + .name = "MX25L1635E", + .bustype = BUS_SPI, + .manufacture_id = MACRONIX_ID, + .model_id = MACRONIX_MX25L1635E, + .total_size = 2048, + .page_size = 256, + /* OTP: 64B total; enter 0xB1, exit 0xC1 */ + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 512} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {64 * 1024, 32} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {2 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {2 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_bp3_srwd, /* bit6 is quad enable */ + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_256, + .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ + .voltage = {2700, 3600}, + }, + + { + .vendor = "Macronix", + .name = "MX25L3205(A)", + .bustype = BUS_SPI, + .manufacture_id = MACRONIX_ID, + .model_id = MACRONIX_MX25L3205, + .total_size = 4096, + .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, + .tested = TEST_OK_PREW, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {64 * 1024, 64} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {64 * 1024, 64} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {4 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {4 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + }, + }, + .printlock = spi_prettyprint_status_register_bp2_srwd, /* bit6: error flag */ + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_256, + .read = spi_chip_read, /* Fast read (0x0B) supported */ + .voltage = {2700, 3600}, + }, + + { + .vendor = "Macronix", + .name = "MX25L3205D/MX25L3208D", + .bustype = BUS_SPI, + .manufacture_id = MACRONIX_ID, + .model_id = MACRONIX_MX25L3205, + .total_size = 4096, + .page_size = 256, + /* OTP: 64B total; enter 0xB1, exit 0xC1 */ + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, + .tested = TEST_OK_PREW, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 1024} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {64 * 1024, 64} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {4 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {4 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + }, + }, + .printlock = spi_prettyprint_status_register_bp3_srwd, /* bit6: CP mode */ + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_256, + .read = spi_chip_read, /* Fast read (0x0B) and dual I/O supported */ + .voltage = {2700, 3600}, + }, + + { + .vendor = "Macronix", + .name = "MX25L3206E", + .bustype = BUS_SPI, + .manufacture_id = MACRONIX_ID, + .model_id = MACRONIX_MX25L3205, + .total_size = 4096, + .page_size = 256, + /* OTP: 64B total; enter 0xB1, exit 0xC1 */ + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, + .tested = TEST_OK_PREW, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 1024} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {64 * 1024, 64} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {64 * 1024, 64} }, + .block_erase = spi_block_erase_52, + }, { + .eraseblocks = { {4 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {4 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + }, + }, + .printlock = spi_prettyprint_status_register_bp3_srwd, + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_256, + .read = spi_chip_read, /* Fast read (0x0B) and dual I/O supported */ + .voltage = {2700, 3600}, + }, + + { + .vendor = "Macronix", + .name = "MX25L3273E", + .bustype = BUS_SPI, + .manufacture_id = MACRONIX_ID, + .model_id = MACRONIX_MX25L3205, + .total_size = 4096, + .page_size = 256, + /* OTP: 64B total; enter 0xB1, exit 0xC1 */ + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 1024} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {32 * 1024, 128} }, + .block_erase = spi_block_erase_52, + }, { + .eraseblocks = { {64 * 1024, 64} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {4 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {4 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + }, + }, + .printlock = spi_prettyprint_status_register_bp3_srwd, + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_256, + .read = spi_chip_read, /* Fast read (0x0B) and dual I/O supported */ + .voltage = {2700, 3600}, + }, + + { + .vendor = "Macronix", + .name = "MX25L3235D", + .bustype = BUS_SPI, + .manufacture_id = MACRONIX_ID, + .model_id = MACRONIX_MX25L3235D, + .total_size = 4096, + .page_size = 256, + /* OTP: 256B total; enter 0xB1, exit 0xC1 */ + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 1024} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {64 * 1024, 64} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {4 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {4 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_bp3_srwd, /* bit6 is quad enable */ + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_256, + .read = spi_chip_read, + .voltage = {2700, 3600}, + }, + + { + .vendor = "Macronix", + .name = "MX25L6405(D)", + .bustype = BUS_SPI, + .manufacture_id = MACRONIX_ID, + .model_id = MACRONIX_MX25L6405, + .total_size = 8192, + .page_size = 256, + /* MX25L6405D has 64B of OTP; enter 0xB1, exit 0xC1 */ + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, + .tested = TEST_OK_PREW, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {64 * 1024, 128} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {64 * 1024, 128} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {8 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {8 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_bp3_srwd, /* bit6 has different meanings */ + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_256, + .read = spi_chip_read, + .voltage = {2700, 3600}, + }, + + { + .vendor = "Macronix", + .name = "MX25L6406E/MX25L6436E", + .bustype = BUS_SPI, + .manufacture_id = MACRONIX_ID, + .model_id = MACRONIX_MX25L6405, + .total_size = 8192, + .page_size = 256, + /* OTP: 06E 64B/36E 512B total; enter 0xB1, exit 0xC1 */ + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, + .tested = TEST_OK_PREW, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 2048} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {64 * 1024, 128} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {8 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {8 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_bp3_srwd, /* bit6 for 36E is quad enable */ + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_256, + .read = spi_chip_read, + .voltage = {2700, 3600}, + }, + + { + .vendor = "Macronix", + .name = "MX25L6445E/MX25L6473E", + .bustype = BUS_SPI, + .manufacture_id = MACRONIX_ID, + .model_id = MACRONIX_MX25L6405, + .total_size = 8192, + .page_size = 256, + /* supports SFDP */ + /* OTP: 512B total; enter 0xB1, exit 0xC1 */ + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, + .tested = TEST_OK_PREW, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 2048} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {32 * 1024, 256} }, + .block_erase = spi_block_erase_52, + }, { + .eraseblocks = { {64 * 1024, 128} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {8 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {8 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_bp3_srwd, /* bit6 is quad enable */ + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_256, + .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ + .voltage = {2700, 3600}, + }, + + { + .vendor = "Macronix", + .name = "MX25L12805(D)", + .bustype = BUS_SPI, + .manufacture_id = MACRONIX_ID, + .model_id = MACRONIX_MX25L12805, + .total_size = 16384, + .page_size = 256, + /* MX25L12805D has 64B of OTP; enter 0xB1, exit 0xC1 */ + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, + .tested = TEST_OK_PREW, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 4096} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {64 * 1024, 256} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {16 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {16 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_bp3_srwd, + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_256, + .read = spi_chip_read, /* MX25L12805D: Fast read (0x0B) supported */ + .voltage = {2700, 3600}, + }, + + { + .vendor = "Macronix", + .name = "MX25U1635E", + .bustype = BUS_SPI, + .manufacture_id = MACRONIX_ID, + .model_id = MACRONIX_MX25U1635E, + .total_size = 2048, + .page_size = 256, + /* OTP: 512B total; enter 0xB1, exit 0xC1 */ + /* QPI enable 0x35, disable 0xF5 (0xFF et al. work too) */ + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_QPI, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 512} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {32 * 1024, 64} }, + .block_erase = spi_block_erase_52, + }, { + .eraseblocks = { {64 * 1024, 32} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {2 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {2 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + /* TODO: security register */ + .printlock = spi_prettyprint_status_register_bp3_srwd, /* bit6 is quad enable */ + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_256, + .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ + .voltage = {1650, 2000}, + }, + + { + .vendor = "Macronix", + .name = "MX25U3235E/F", + .bustype = BUS_SPI, + .manufacture_id = MACRONIX_ID, + .model_id = MACRONIX_MX25U3235E, + .total_size = 4096, + .page_size = 256, + /* F model supports SFDP */ + /* OTP: 512B total; enter 0xB1, exit 0xC1 */ + /* QPI enable 0x35, disable 0xF5 (0xFF et al. work too) */ + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_QPI, + .tested = TEST_OK_PREW, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 1024} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {32 * 1024, 128} }, + .block_erase = spi_block_erase_52, + }, { + .eraseblocks = { {64 * 1024, 64} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {4 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {4 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + /* TODO: security register */ + .printlock = spi_prettyprint_status_register_bp3_srwd, /* bit6 is quad enable */ + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_256, + .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ + .voltage = {1650, 2000}, + }, + + { + .vendor = "Macronix", + .name = "MX25U6435E/F", + .bustype = BUS_SPI, + .manufacture_id = MACRONIX_ID, + .model_id = MACRONIX_MX25U6435E, + .total_size = 8192, + .page_size = 256, + /* F model supports SFDP */ + /* OTP: 512B total; enter 0xB1, exit 0xC1 */ + /* QPI enable 0x35, disable 0xF5 (0xFF et al. work too) */ + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_QPI, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 2048} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {32 * 1024, 256} }, + .block_erase = spi_block_erase_52, + }, { + .eraseblocks = { {64 * 1024, 128} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {8 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {8 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + /* TODO: security register */ + .printlock = spi_prettyprint_status_register_bp3_srwd, /* bit6 is quad enable */ + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_256, + .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ + .voltage = {1650, 2000}, + }, + + { + .vendor = "Macronix", + .name = "MX29F001B", + .bustype = BUS_PARALLEL, + .manufacture_id = MACRONIX_ID, + .model_id = MACRONIX_MX29F001B, + .total_size = 128, + .page_size = 32 * 1024, + .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, + .tested = TEST_UNTESTED, + .probe = probe_jedec, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { + {8 * 1024, 1}, + {4 * 1024, 2}, + {8 * 1024, 2}, + {32 * 1024, 1}, + {64 * 1024, 1}, + }, + .block_erase = erase_sector_jedec, + }, { + .eraseblocks = { {128 * 1024, 1} }, + .block_erase = erase_chip_block_jedec, + } + }, + .write = write_jedec_1, + .read = read_memmapped, + .voltage = {4500, 5500}, + }, + + { + .vendor = "Macronix", + .name = "MX29F001T", + .bustype = BUS_PARALLEL, + .manufacture_id = MACRONIX_ID, + .model_id = MACRONIX_MX29F001T, + .total_size = 128, + .page_size = 32 * 1024, + .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, + .tested = TEST_OK_PREW, + .probe = probe_jedec, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { + {64 * 1024, 1}, + {32 * 1024, 1}, + {8 * 1024, 2}, + {4 * 1024, 2}, + {8 * 1024, 1}, + }, + .block_erase = erase_sector_jedec, + }, { + .eraseblocks = { {128 * 1024, 1} }, + .block_erase = erase_chip_block_jedec, + } + }, + .write = write_jedec_1, + .read = read_memmapped, + .voltage = {4500, 5500}, + }, + + { + .vendor = "Macronix", + .name = "MX29F002(N)B", + .bustype = BUS_PARALLEL, + .manufacture_id = MACRONIX_ID, + .model_id = MACRONIX_MX29F002B, + .total_size = 256, + .page_size = 64 * 1024, + .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, + .tested = TEST_UNTESTED, + .probe = probe_jedec, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { + {16 * 1024, 1}, + {8 * 1024, 2}, + {32 * 1024, 1}, + {64 * 1024, 3}, + }, + .block_erase = erase_sector_jedec, + }, { + .eraseblocks = { {256 * 1024, 1} }, + .block_erase = erase_chip_block_jedec, + }, + }, + .write = write_jedec_1, + .read = read_memmapped, + .voltage = {4500, 5500}, + }, + + { + .vendor = "Macronix", + .name = "MX29F002(N)T", + .bustype = BUS_PARALLEL, + .manufacture_id = MACRONIX_ID, + .model_id = MACRONIX_MX29F002T, + .total_size = 256, + .page_size = 64 * 1024, + .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, + .tested = TEST_OK_PREW, + .probe = probe_jedec, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { + {64 * 1024, 3}, + {32 * 1024, 1}, + {8 * 1024, 2}, + {16 * 1024, 1}, + }, + .block_erase = erase_sector_jedec, + }, { + .eraseblocks = { {256 * 1024, 1} }, + .block_erase = erase_chip_block_jedec, + }, + }, + .write = write_jedec_1, + .read = read_memmapped, + .voltage = {4500, 5500}, + }, + + { + .vendor = "Macronix", + .name = "MX29F040", + .bustype = BUS_PARALLEL, + .manufacture_id = MACRONIX_ID, + .model_id = MACRONIX_MX29F040, + .total_size = 512, + .page_size = 64 * 1024, + .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, + .tested = TEST_UNTESTED, + .probe = probe_jedec, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {64 * 1024, 8} }, + .block_erase = erase_sector_jedec, + }, { + .eraseblocks = { {512 * 1024, 1} }, + .block_erase = erase_chip_block_jedec, + }, + }, + .write = write_jedec_1, + .read = read_memmapped, + .voltage = {4500, 5500}, + }, + + { + .vendor = "Macronix", + .name = "MX29LV040", + .bustype = BUS_PARALLEL, + .manufacture_id = MACRONIX_ID, + .model_id = MACRONIX_MX29LV040, + .total_size = 512, + .page_size = 64 * 1024, + .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, + .tested = TEST_UNTESTED, + .probe = probe_jedec, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {64 * 1024, 8}, }, + .block_erase = erase_sector_jedec, + }, { + .eraseblocks = { {512 * 1024, 1} }, + .block_erase = erase_chip_block_jedec, + }, + }, + .write = write_jedec_1, + .read = read_memmapped, + .voltage = {2700, 3600}, + }, + + { + .vendor = "Micron/Numonyx/ST", + .name = "M25P05-A", + .bustype = BUS_SPI, + .manufacture_id = ST_ID, + .model_id = ST_M25P05A, + .total_size = 64, + .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, + .tested = TEST_OK_PREW, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {32 * 1024, 2} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {64 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_bp3_srwd, /* TODO: check */ + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_256, + .read = spi_chip_read, + .voltage = {2700, 3600}, + }, + + /* The ST M25P05 is a bit of a problem. It has the same ID as the + * ST M25P05-A in RES mode, but supports only 128 byte writes instead + * of 256 byte writes. We rely heavily on the fact that probe_spi_res1 + * only is successful if RDID does not work. + */ + { + .vendor = "Micron/Numonyx/ST", + .name = "M25P05", + .bustype = BUS_SPI, + .manufacture_id = 0, /* Not used. */ + .model_id = ST_M25P05_RES, + .total_size = 64, + .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, + .tested = TEST_UNTESTED, + .probe = probe_spi_res1, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {32 * 1024, 2} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {64 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_bp3_srwd, /* TODO: check */ + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_1, /* 128 */ + .read = spi_chip_read, + .voltage = {2700, 3600}, + }, + + { + .vendor = "Micron/Numonyx/ST", + .name = "M25P10-A", + .bustype = BUS_SPI, + .manufacture_id = ST_ID, + .model_id = ST_M25P10A, + .total_size = 128, + .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, + .tested = TEST_OK_PRE, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {32 * 1024, 4} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {128 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_bp3_srwd, /* TODO: check */ + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_256, + .read = spi_chip_read, + .voltage = {2700, 3600}, + }, + + /* The ST M25P10 has the same problem as the M25P05. */ + { + .vendor = "Micron/Numonyx/ST", + .name = "M25P10", + .bustype = BUS_SPI, + .manufacture_id = 0, /* Not used. */ + .model_id = ST_M25P10_RES, + .total_size = 128, + .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, + .tested = TEST_UNTESTED, + .probe = probe_spi_res1, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {32 * 1024, 4} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {128 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_bp3_srwd, /* TODO: check */ + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_1, /* 128 */ + .read = spi_chip_read, + .voltage = {2700, 3600}, + }, + + { + .vendor = "Micron/Numonyx/ST", /* Numonyx */ + .name = "M25P20", + .bustype = BUS_SPI, + .manufacture_id = ST_ID, + .model_id = ST_M25P20, + .total_size = 256, + .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {64 * 1024, 4} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {256 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_bp1_srwd, + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_256, + .read = spi_chip_read, /* Fast read (0x0B) supported */ + .voltage = {2700, 3600}, + }, + + { + .vendor = "Micron/Numonyx/ST", + .name = "M25P20-old", + .bustype = BUS_SPI, + .manufacture_id = 0, /* Not used. */ + .model_id = ST_M25P20_RES, + .total_size = 256, + .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, + .tested = TEST_OK_PREW, + .probe = probe_spi_res1, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {64 * 1024, 4} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {256 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_bp1_srwd, + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_256, + .read = spi_chip_read, /* Fast read (0x0B) supported */ + .voltage = {2700, 3600}, + }, + + { + .vendor = "Micron/Numonyx/ST", /* Numonyx */ + .name = "M25P40", + .bustype = BUS_SPI, + .manufacture_id = ST_ID, + .model_id = ST_M25P40, + .total_size = 512, + .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, + .tested = TEST_OK_PREW, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {64 * 1024, 8} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {512 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_bp3_srwd, /* TODO: check */ + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_256, + .read = spi_chip_read, + .voltage = {2700, 3600}, + }, + + { + .vendor = "Micron/Numonyx/ST", + .name = "M25P40-old", + .bustype = BUS_SPI, + .manufacture_id = 0, /* Not used. */ + .model_id = ST_M25P40_RES, + .total_size = 512, + .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, + .tested = TEST_UNTESTED, + .probe = probe_spi_res1, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {64 * 1024, 8} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {512 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_bp3_srwd, /* TODO: check */ + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_256, + .read = spi_chip_read, + }, + + { + .vendor = "Micron/Numonyx/ST", + .name = "M25P80", + .bustype = BUS_SPI, + .manufacture_id = ST_ID, + .model_id = ST_M25P80, + .total_size = 1024, + .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, + .tested = TEST_OK_PREW, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {64 * 1024, 16} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {1024 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_bp3_srwd, /* TODO: check */ + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_256, + .read = spi_chip_read, + .voltage = {2700, 3600}, + }, + + { + .vendor = "Micron/Numonyx/ST", + .name = "M25P16", + .bustype = BUS_SPI, + .manufacture_id = ST_ID, + .model_id = ST_M25P16, + .total_size = 2048, + .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, + .tested = TEST_OK_PREW, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {64 * 1024, 32} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {2 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_bp3_srwd, /* TODO: check */ + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_256, + .read = spi_chip_read, + .voltage = {2700, 3600}, + }, + + { + .vendor = "Micron/Numonyx/ST", + .name = "M25P32", + .bustype = BUS_SPI, + .manufacture_id = ST_ID, + .model_id = ST_M25P32, + .total_size = 4096, + .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, + .tested = TEST_OK_PREW, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {64 * 1024, 64} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {4 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_bp3_srwd, /* TODO: check */ + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_256, + .read = spi_chip_read, + .voltage = {2700, 3600}, + }, + + { + .vendor = "Micron/Numonyx/ST", + .name = "M25P64", + .bustype = BUS_SPI, + .manufacture_id = ST_ID, + .model_id = ST_M25P64, + .total_size = 8192, + .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, + .tested = TEST_OK_PREW, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {64 * 1024, 128} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {8 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_bp3_srwd, /* TODO: check */ + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_256, + .read = spi_chip_read, + .voltage = {2700, 3600}, + }, + + { + .vendor = "Micron/Numonyx/ST", + .name = "M25P128", + .bustype = BUS_SPI, + .manufacture_id = ST_ID, + .model_id = ST_M25P128, + .total_size = 16384, + .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, + .tested = TEST_OK_PREW, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {256 * 1024, 64} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {16 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_bp3_srwd, /* TODO: check */ + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_256, + .read = spi_chip_read, + .voltage = {2700, 3600}, + }, + + { + .vendor = "Micron/Numonyx/ST", + .name = "M25PE10", + .bustype = BUS_SPI, + .manufacture_id = ST_ID, + .model_id = ST_M25PE10, + .total_size = 128, + .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 32} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {64 * 1024, 2} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {128 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_256, + .read = spi_chip_read, + .voltage = {2700, 3600}, + }, + + { + .vendor = "Micron/Numonyx/ST", + .name = "M25PE20", + .bustype = BUS_SPI, + .manufacture_id = ST_ID, + .model_id = ST_M25PE20, + .total_size = 256, + .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 64} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {64 * 1024, 4} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {256 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_256, + .read = spi_chip_read, + .voltage = {2700, 3600}, + }, + + { + .vendor = "Micron/Numonyx/ST", + .name = "M25PE40", + .bustype = BUS_SPI, + .manufacture_id = ST_ID, + .model_id = ST_M25PE40, + .total_size = 512, + .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 128} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {64 * 1024, 8} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {512 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_256, + .read = spi_chip_read, + .voltage = {2700, 3600}, + }, + + { + .vendor = "Micron/Numonyx/ST", + .name = "M25PE80", + .bustype = BUS_SPI, + .manufacture_id = ST_ID, + .model_id = ST_M25PE80, + .total_size = 1024, + .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, + .tested = TEST_OK_PREW, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 256} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {64 * 1024, 16} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {1024 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_256, + .read = spi_chip_read, + .voltage = {2700, 3600}, + }, + + { + .vendor = "Micron/Numonyx/ST", + .name = "M25PE16", + .bustype = BUS_SPI, + .manufacture_id = ST_ID, + .model_id = ST_M25PE16, + .total_size = 2048, + .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 512} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {64 * 1024, 32} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {2 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_256, + .read = spi_chip_read, + .voltage = {2700, 3600}, + }, + + { + .vendor = "Micron/Numonyx/ST", + .name = "M25PX80", + .bustype = BUS_SPI, + .manufacture_id = ST_ID, + .model_id = ST_M25PX80, + .total_size = 1024, + .page_size = 256, + /* OTP: 64B total; read 0x4B, write 0x42 */ + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, + .tested = TEST_OK_PREW, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = { + { + .eraseblocks = { { 4 * 1024, 256 } }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {64 * 1024, 16} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {1024 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_bp2_srwd, /* bit5: T/B */ + .unlock = spi_disable_blockprotect_bp2_srwd, /* TODO: per 64kB sector lock registers */ + .write = spi_chip_write_256, + .read = spi_chip_read, + .voltage = {2700, 3600}, + }, + + { + .vendor = "Micron/Numonyx/ST", + .name = "M25PX16", + .bustype = BUS_SPI, + .manufacture_id = ST_ID, + .model_id = ST_M25PX16, + .total_size = 2048, + .page_size = 256, + /* OTP: 64B total; read 0x4B; write 0x42 */ + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, + .tested = TEST_OK_PREW, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { { 4 * 1024, 512 } }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {64 * 1024, 32} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {2 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_bp2_srwd, /* bit5: T/B */ + .unlock = spi_disable_blockprotect_bp2_srwd, /* TODO: per 64kB sector lock registers */ + .write = spi_chip_write_256, + .read = spi_chip_read, + .voltage = {2300, 3600}, + }, + + { + .vendor = "Micron/Numonyx/ST", + .name = "M25PX32", + .bustype = BUS_SPI, + .manufacture_id = ST_ID, + .model_id = ST_M25PX32, + .total_size = 4096, + .page_size = 256, + /* OTP: 64B total; read 0x4B; write 0x42 */ + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, + .tested = TEST_OK_PRE, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { { 4 * 1024, 1024 } }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {64 * 1024, 64} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {4 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_bp2_srwd, /* bit5: T/B */ + .unlock = spi_disable_blockprotect_bp2_srwd, /* TODO: per 64kB sector lock registers */ + .write = spi_chip_write_256, + .read = spi_chip_read, + .voltage = {2700, 3600}, + }, + + { + .vendor = "Micron/Numonyx/ST", + .name = "M25PX64", + .bustype = BUS_SPI, + .manufacture_id = ST_ID, + .model_id = ST_M25PX64, + .total_size = 8192, + .page_size = 256, + /* OTP: 64B total; read 0x4B; write 0x42 */ + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, + .tested = TEST_OK_PREW, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { { 4 * 1024, 2048 } }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {64 * 1024, 128} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {8 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_bp2_srwd, /* bit5: T/B */ + .unlock = spi_disable_blockprotect_bp2_srwd, /* TODO: per 64kB sector lock registers */ + .write = spi_chip_write_256, + .read = spi_chip_read, + .voltage = {2700, 3600}, + }, + + { + .vendor = "Micron/Numonyx/ST", + .name = "M45PE10", + .bustype = BUS_SPI, + .manufacture_id = ST_ID, + .model_id = ST_M45PE10, + .total_size = 128, + .page_size = 256, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = { + { + .eraseblocks = { {256, 512} }, + .block_erase = spi_block_erase_db, + }, { + .eraseblocks = { {64 * 1024, 2} }, + .block_erase = spi_block_erase_d8, + } + }, + .printlock = spi_prettyprint_status_register_default_welwip, + .unlock = NULL, /* #WP pin write-protects lower 64kB. */ + .write = spi_chip_write_256, /* Page write (similar to PP but allows 0->1 changes) */ + .read = spi_chip_read, /* Fast read (0x0B) supported */ + .voltage = {2700, 3600}, + }, + + { + .vendor = "Micron/Numonyx/ST", + .name = "M45PE20", + .bustype = BUS_SPI, + .manufacture_id = ST_ID, + .model_id = ST_M45PE20, + .total_size = 256, + .page_size = 256, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = { + { + .eraseblocks = { {256, 1024} }, + .block_erase = spi_block_erase_db, + }, { + .eraseblocks = { {64 * 1024, 4} }, + .block_erase = spi_block_erase_d8, + } + }, + .printlock = spi_prettyprint_status_register_default_welwip, + .unlock = NULL, /* #WP pin write-protects lower 64kB. */ + .write = spi_chip_write_256, /* Page write (similar to PP but allows 0->1 changes) */ + .read = spi_chip_read, /* Fast read (0x0B) supported */ + .voltage = {2700, 3600}, + }, + + { + .vendor = "Micron/Numonyx/ST", + .name = "M45PE40", + .bustype = BUS_SPI, + .manufacture_id = ST_ID, + .model_id = ST_M45PE40, + .total_size = 512, + .page_size = 256, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = { + { + .eraseblocks = { {256, 2048} }, + .block_erase = spi_block_erase_db, + }, { + .eraseblocks = { {64 * 1024, 8} }, + .block_erase = spi_block_erase_d8, + } + }, + .printlock = spi_prettyprint_status_register_default_welwip, + .unlock = NULL, /* #WP pin write-protects lower 64kB. */ + .write = spi_chip_write_256, /* Page write (similar to PP but allows 0->1 changes) */ + .read = spi_chip_read, /* Fast read (0x0B) supported */ + .voltage = {2700, 3600}, + }, + + { + .vendor = "Micron/Numonyx/ST", + .name = "M45PE80", + .bustype = BUS_SPI, + .manufacture_id = ST_ID, + .model_id = ST_M45PE80, + .total_size = 1024, + .page_size = 256, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = { + { + .eraseblocks = { {256, 4096} }, + .block_erase = spi_block_erase_db, + }, { + .eraseblocks = { {64 * 1024, 16} }, + .block_erase = spi_block_erase_d8, + } + }, + .printlock = spi_prettyprint_status_register_default_welwip, + .unlock = NULL, /* #WP pin write-protects lower 64kB. */ + .write = spi_chip_write_256, /* Page write (similar to PP but allows 0->1 changes) */ + .read = spi_chip_read, /* Fast read (0x0B) supported */ + .voltage = {2700, 3600}, + }, + + { + .vendor = "Micron/Numonyx/ST", + .name = "M45PE16", + .bustype = BUS_SPI, + .manufacture_id = ST_ID, + .model_id = ST_M45PE16, + .total_size = 2048, + .page_size = 256, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = { + { + .eraseblocks = { {256, 8192} }, + .block_erase = spi_block_erase_db, + }, { + .eraseblocks = { {64 * 1024, 32} }, + .block_erase = spi_block_erase_d8, + } + }, + .printlock = spi_prettyprint_status_register_default_welwip, + .unlock = NULL, /* #WP pin write-protects lower 64kB. */ + .write = spi_chip_write_256, /* Page write (similar to PP but allows 0->1 changes) */ + .read = spi_chip_read, /* Fast read (0x0B) supported */ + .voltage = {2700, 3600}, + }, + + { + .vendor = "Micron/Numonyx/ST", + .name = "N25Q016", + .bustype = BUS_SPI, + .manufacture_id = ST_ID, + .model_id = ST_N25Q016__1E, + .total_size = 2048, + .page_size = 256, + /* supports SFDP */ + /* OTP: 64B total; read 0x4B, write 0x42 */ + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 512} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {32 * 1024, 64} }, + .block_erase = spi_block_erase_52, + }, { + .eraseblocks = { {64 * 1024, 32} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {2 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_n25q, /* TODO: config, lock, flag regs */ + .unlock = spi_disable_blockprotect_n25q, /* TODO: per 64kB sector lock registers */ + .write = spi_chip_write_256, /* Multi I/O supported */ + .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ + .voltage = {1700, 2000}, + }, + + { + .vendor = "Micron/Numonyx/ST", + .name = "N25Q032..1E", + .bustype = BUS_SPI, + .manufacture_id = ST_ID, + .model_id = ST_N25Q032__1E, + .total_size = 4096, + .page_size = 256, + /* supports SFDP */ + /* OTP: 64B total; read 0x4B, write 0x42 */ + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 1024} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {64 * 1024, 64} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {4 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_n25q, /* TODO: config, lock, flag regs */ + .unlock = spi_disable_blockprotect_n25q, /* TODO: per 64kB sector lock registers */ + .write = spi_chip_write_256, /* Multi I/O supported */ + .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ + .voltage = {1700, 2000}, + }, + + { + .vendor = "Micron/Numonyx/ST", + .name = "N25Q032..3E", + .bustype = BUS_SPI, + .manufacture_id = ST_ID, + .model_id = ST_N25Q032__3E, + .total_size = 4096, + .page_size = 256, + /* supports SFDP */ + /* OTP: 64B total; read 0x4B, write 0x42 */ + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, + .tested = TEST_OK_PREW, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 1024} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {64 * 1024, 64} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {4 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_n25q, /* TODO: config, lock, flag regs */ + .unlock = spi_disable_blockprotect_n25q, /* TODO: per 64kB sector lock registers */ + .write = spi_chip_write_256, /* Multi I/O supported */ + .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ + .voltage = {2700, 3600}, + }, + + { + .vendor = "Micron/Numonyx/ST", + .name = "N25Q064..1E", /* ..1E = 1.8V, uniform 64KB/4KB blocks/sectors */ + .bustype = BUS_SPI, + .manufacture_id = ST_ID, + .model_id = ST_N25Q064__1E, + .total_size = 8192, + .page_size = 256, + /* supports SFDP */ + /* OTP: 64B total; read 0x4B, write 0x42 */ + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, + .tested = TEST_OK_PREW, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 2048 } }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {64 * 1024, 128} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {8 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_n25q, /* TODO: config, lock, flag regs */ + .unlock = spi_disable_blockprotect_n25q, /* TODO: per 64kB sector lock registers */ + .write = spi_chip_write_256, /* Multi I/O supported */ + .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ + .voltage = {1700, 2000}, + }, + + { + .vendor = "Micron/Numonyx/ST", + .name = "N25Q064..3E", /* ..3E = 3V, uniform 64KB/4KB blocks/sectors */ + .bustype = BUS_SPI, + .manufacture_id = ST_ID, + .model_id = ST_N25Q064__3E, + .total_size = 8192, + .page_size = 256, + /* supports SFDP */ + /* OTP: 64B total; read 0x4B, write 0x42 */ + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, + .tested = TEST_OK_PREW, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 2048 } }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {64 * 1024, 128} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {8 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_n25q, /* TODO: config, lock, flag regs */ + .unlock = spi_disable_blockprotect_n25q, /* TODO: per 64kB sector lock registers */ + .write = spi_chip_write_256, /* Multi I/O supported */ + .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ + .voltage = {2700, 3600}, + }, + + { + .vendor = "Micron/Numonyx/ST", + .name = "N25Q128..1E", /* ..1E = 1.8V, uniform 64KB/4KB blocks/sectors */ + .bustype = BUS_SPI, + .manufacture_id = ST_ID, + .model_id = ST_N25Q128__1E, + .total_size = 16384, + .page_size = 256, + /* supports SFDP */ + /* OTP: 64B total; read 0x4B, write 0x42 */ + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = { + { + .eraseblocks = { {4 * 1024, 4096 } }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {64 * 1024, 256} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {16384 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_n25q, /* TODO: config, lock, flag regs */ + .unlock = spi_disable_blockprotect_n25q, /* TODO: per 64kB sector lock registers */ + .write = spi_chip_write_256, /* Multi I/O supported */ + .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ + .voltage = {1700, 2000}, + }, + + { + .vendor = "Micron/Numonyx/ST", + .name = "N25Q128..3E", /* ..3E = 3V, uniform 64KB/4KB blocks/sectors */ + .bustype = BUS_SPI, + .manufacture_id = ST_ID, + .model_id = ST_N25Q128__3E, + .total_size = 16384, + .page_size = 256, + /* supports SFDP */ + /* OTP: 64B total; read 0x4B, write 0x42 */ + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, + .tested = TEST_OK_PREW, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = { + { + .eraseblocks = { {4 * 1024, 4096 } }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {64 * 1024, 256} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {16384 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_n25q, /* TODO: config, lock, flag regs */ + .unlock = spi_disable_blockprotect_n25q, /* TODO: per 64kB sector lock registers */ + .write = spi_chip_write_256, /* Multi I/O supported */ + .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ + .voltage = {2700, 3600}, + }, + + { + .vendor = "MoselVitelic", + .name = "V29C51000B", + .bustype = BUS_PARALLEL, + .manufacture_id = SYNCMOS_MVC_ID, + .model_id = MVC_V29C51000B, + .total_size = 64, + .page_size = 512, + .feature_bits = FEATURE_EITHER_RESET, + .tested = TEST_UNTESTED, + .probe = probe_jedec, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {512, 128} }, + .block_erase = erase_sector_jedec, + }, { + .eraseblocks = { {64 * 1024, 1} }, + .block_erase = erase_chip_block_jedec, + }, + }, + .write = write_jedec_1, + .read = read_memmapped, + .voltage = {4500, 5500}, + }, + + { + .vendor = "MoselVitelic", + .name = "V29C51000T", + .bustype = BUS_PARALLEL, + .manufacture_id = SYNCMOS_MVC_ID, + .model_id = MVC_V29C51000T, + .total_size = 64, + .page_size = 512, + .feature_bits = FEATURE_EITHER_RESET, + .tested = TEST_UNTESTED, + .probe = probe_jedec, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {512, 128} }, + .block_erase = erase_sector_jedec, + }, { + .eraseblocks = { {64 * 1024, 1} }, + .block_erase = erase_chip_block_jedec, + }, + }, + .write = write_jedec_1, + .read = read_memmapped, + .voltage = {4500, 5500}, + }, + + { + .vendor = "MoselVitelic", + .name = "V29C51400B", + .bustype = BUS_PARALLEL, + .manufacture_id = SYNCMOS_MVC_ID, + .model_id = MVC_V29C51400B, + .total_size = 512, + .page_size = 1024, + .feature_bits = FEATURE_EITHER_RESET, + .tested = TEST_UNTESTED, + .probe = probe_jedec, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {1024, 512} }, + .block_erase = erase_sector_jedec, + }, { + .eraseblocks = { {512 * 1024, 1} }, + .block_erase = erase_chip_block_jedec, + }, + }, + .write = write_jedec_1, + .read = read_memmapped, + .voltage = {4500, 5500}, + }, + + { + .vendor = "MoselVitelic", + .name = "V29C51400T", + .bustype = BUS_PARALLEL, + .manufacture_id = SYNCMOS_MVC_ID, + .model_id = MVC_V29C51400T, + .total_size = 512, + .page_size = 1024, + .feature_bits = FEATURE_EITHER_RESET, + .tested = TEST_UNTESTED, + .probe = probe_jedec, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {1024, 512} }, + .block_erase = erase_sector_jedec, + }, { + .eraseblocks = { {512 * 1024, 1} }, + .block_erase = erase_chip_block_jedec, + }, + }, + .write = write_jedec_1, + .read = read_memmapped, + .voltage = {4500, 5500}, + }, + + { + .vendor = "MoselVitelic", + .name = "V29LC51000", + .bustype = BUS_PARALLEL, + .manufacture_id = SYNCMOS_MVC_ID, + .model_id = MVC_V29LC51000, + .total_size = 64, + .page_size = 512, + .feature_bits = FEATURE_EITHER_RESET, + .tested = TEST_UNTESTED, + .probe = probe_jedec, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {512, 128} }, + .block_erase = erase_sector_jedec, + }, { + .eraseblocks = { {64 * 1024, 1} }, + .block_erase = erase_chip_block_jedec, + }, + }, + .write = write_jedec_1, + .read = read_memmapped, + .voltage = {4500, 5500}, + }, + + { + .vendor = "MoselVitelic", + .name = "V29LC51001", + .bustype = BUS_PARALLEL, + .manufacture_id = SYNCMOS_MVC_ID, + .model_id = MVC_V29LC51001, + .total_size = 128, + .page_size = 512, + .feature_bits = FEATURE_EITHER_RESET, + .tested = TEST_UNTESTED, + .probe = probe_jedec, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {512, 256} }, + .block_erase = erase_sector_jedec, + }, { + .eraseblocks = { {128 * 1024, 1} }, + .block_erase = erase_chip_block_jedec, + }, + }, + .write = write_jedec_1, + .read = read_memmapped, + .voltage = {4500, 5500}, + }, + + { + .vendor = "MoselVitelic", + .name = "V29LC51002", + .bustype = BUS_PARALLEL, + .manufacture_id = SYNCMOS_MVC_ID, + .model_id = MVC_V29LC51002, + .total_size = 256, + .page_size = 512, + .feature_bits = FEATURE_EITHER_RESET, + .tested = TEST_UNTESTED, + .probe = probe_jedec, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {512, 512} }, + .block_erase = erase_sector_jedec, + }, { + .eraseblocks = { {256 * 1024, 1} }, + .block_erase = erase_chip_block_jedec, + }, + }, + .write = write_jedec_1, + .read = read_memmapped, + .voltage = {4500, 5500}, + }, + + { + .vendor = "Nantronics", + .name = "N25S10", + .bustype = BUS_SPI, + .manufacture_id = NANTRONICS_ID_NOPREFIX, + .model_id = NANTRONICS_N25S10, + .total_size = 128, + .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 32} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {4 * 1024, 32} }, + .block_erase = spi_block_erase_d7, + }, { + .eraseblocks = { {32 * 1024, 4} }, + .block_erase = spi_block_erase_52, + }, { + .eraseblocks = { {64 * 1024, 2} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {128 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {128 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_bp3_srwd, + .unlock = spi_disable_blockprotect_bp3_srwd, + .write = spi_chip_write_256, + .read = spi_chip_read, /* Fast read (0x0B), dual I/O read (0x3B) supported */ + .voltage = {2700, 3600}, + }, + + { + .vendor = "Nantronics", + .name = "N25S20", + .bustype = BUS_SPI, + .manufacture_id = NANTRONICS_ID_NOPREFIX, + .model_id = NANTRONICS_N25S20, + .total_size = 256, + .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 64} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {4 * 1024, 64} }, + .block_erase = spi_block_erase_d7, + }, { + .eraseblocks = { {32 * 1024, 8} }, + .block_erase = spi_block_erase_52, + }, { + .eraseblocks = { {64 * 1024, 4} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {256 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {256 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_bp3_srwd, + .unlock = spi_disable_blockprotect_bp3_srwd, + .write = spi_chip_write_256, + .read = spi_chip_read, /* Fast read (0x0B), dual I/O read (0x3B) supported */ + .voltage = {2700, 3600}, + }, + + { + .vendor = "Nantronics", + .name = "N25S40", + .bustype = BUS_SPI, + .manufacture_id = NANTRONICS_ID_NOPREFIX, + .model_id = NANTRONICS_N25S40, + .total_size = 512, + .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 128} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {4 * 1024, 128} }, + .block_erase = spi_block_erase_d7, + }, { + .eraseblocks = { {32 * 1024, 16} }, + .block_erase = spi_block_erase_52, + }, { + .eraseblocks = { {64 * 1024, 8} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {512 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {512 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_bp3_srwd, + .unlock = spi_disable_blockprotect_bp3_srwd, + .write = spi_chip_write_256, + .read = spi_chip_read, /* Fast read (0x0B), dual I/O read (0x3B) supported */ + .voltage = {2700, 3600}, + }, + + { + .vendor = "Nantronics", + .name = "N25S80", + .bustype = BUS_SPI, + .manufacture_id = NANTRONICS_ID_NOPREFIX, + .model_id = NANTRONICS_N25S80, + .total_size = 1024, + .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 256} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {32 * 1024, 32} }, + .block_erase = spi_block_erase_52, + }, { + .eraseblocks = { {64 * 1024, 16} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {1024 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {1024 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_bp3_srwd, + .unlock = spi_disable_blockprotect_bp3_srwd, + .write = spi_chip_write_256, + .read = spi_chip_read, /* Fast read (0x0B), dual I/O read (0x3B) supported */ + .voltage = {2700, 3600}, + }, + + { + .vendor = "Nantronics", + .name = "N25S16", + .bustype = BUS_SPI, + .manufacture_id = NANTRONICS_ID_NOPREFIX, + .model_id = NANTRONICS_N25S16, + .total_size = 2048, + .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 512} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {64 * 1024, 32} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {2048 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {2048 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_bp3_srwd, + .unlock = spi_disable_blockprotect_bp3_srwd, + .write = spi_chip_write_256, + .read = spi_chip_read, /* Fast read (0x0B), dual I/O read (0x3B) supported */ + .voltage = {2700, 3600}, + }, + + { + .vendor = "PMC", + .name = "Pm25LD256C", + .bustype = BUS_SPI, + .manufacture_id = PMC_ID, + .model_id = PMC_PM25LD256C, + .total_size = 32, + .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 8} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {4 * 1024, 8} }, + .block_erase = spi_block_erase_d7, + }, { + .eraseblocks = { {32 * 1024, 1} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {32 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {32 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_bp2_srwd, + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_256, + .read = spi_chip_read, /* Fast read (0x0B), dual I/O supported */ + .voltage = {2700, 3600}, + }, + { + .vendor = "PMC", + .name = "Pm25LD512(C)", + .bustype = BUS_SPI, + .manufacture_id = PMC_ID, + .model_id = PMC_PM25LD512, + .total_size = 64, + .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, + .tested = TEST_OK_PREW, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 16} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {4 * 1024, 16} }, + .block_erase = spi_block_erase_d7, + }, { + .eraseblocks = { {32 * 1024, 2} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {64 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {64 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_bp2_srwd, + .unlock = spi_disable_blockprotect, /* FIXME: C version supports "Safe Guard" */ + .write = spi_chip_write_256, + .read = spi_chip_read, /* Fast read (0x0B), dual I/O supported */ + .voltage = {2300, 3600}, + }, + + { + .vendor = "PMC", + .name = "Pm25LD010(C)", + .bustype = BUS_SPI, + .manufacture_id = PMC_ID, + .model_id = PMC_PM25LD010, + .total_size = 128, + .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, + .tested = TEST_OK_PREW, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 32} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {4 * 1024, 32} }, + .block_erase = spi_block_erase_d7, + }, { + .eraseblocks = { {32 * 1024, 4} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {128 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {128 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_bp2_srwd, + .unlock = spi_disable_blockprotect, /* FIXME: C version supports "Safe Guard" */ + .write = spi_chip_write_256, + .read = spi_chip_read, /* Fast read (0x0B), dual I/O supported */ + .voltage = {2700, 3600}, /* 2.3-3.6V for Pm25LD010 */ + }, + + { + .vendor = "PMC", + .name = "Pm25LD020(C)", + .bustype = BUS_SPI, + .manufacture_id = PMC_ID, + .model_id = PMC_PM25LD020, + .total_size = 256, + .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 64} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {4 * 1024, 64} }, + .block_erase = spi_block_erase_d7, + }, { + .eraseblocks = { {64 * 1024, 4} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {256 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {256 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_bp2_srwd, + .unlock = spi_disable_blockprotect, /* FIXME: C version supports "Safe Guard" */ + .write = spi_chip_write_256, + .read = spi_chip_read, /* Fast read (0x0B), dual I/O supported */ + .voltage = {2700, 3600}, /* 2.3-3.6V for Pm25LD020 */ + }, + + { + .vendor = "PMC", + .name = "Pm25LD040(C)", + .bustype = BUS_SPI, + .manufacture_id = PMC_ID, + .model_id = PMC_PM25LV040, + .total_size = 512, + .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 128} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {4 * 1024, 128} }, + .block_erase = spi_block_erase_d7, + }, { + .eraseblocks = { {64 * 1024, 8} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {512 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {512 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_bp2_srwd, + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_256, + .read = spi_chip_read, /* Fast read (0x0B), dual I/O supported */ + .voltage = {2700, 3600}, /* 2.3-3.6V for Pm25LD040 */ + }, + +{ + .vendor = "PMC", + .name = "Pm25LV512(A)", + .bustype = BUS_SPI, + .manufacture_id = PMC_ID_NOPREFIX, + .model_id = PMC_PM25LV512, + .total_size = 64, + .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, + .tested = TEST_UNTESTED, + .probe = probe_spi_res2, /* The continuation code is transferred as the 3rd byte m( */ + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 16} }, + .block_erase = spi_block_erase_d7, + }, { + .eraseblocks = { {32 * 1024, 2} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {64 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_bp1_srwd, + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_256, + .read = spi_chip_read, /* Fast read (0x0B) supported */ + .voltage = {2700, 3600}, + }, + + { + .vendor = "PMC", + .name = "Pm25LV010", + .bustype = BUS_SPI, + .manufacture_id = PMC_ID_NOPREFIX, + .model_id = PMC_PM25LV010, + .total_size = 128, + .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, + .tested = TEST_OK_PREW, + .probe = probe_spi_res2, /* The continuation code is transferred as the 3rd byte m( */ + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 32} }, + .block_erase = spi_block_erase_d7, + }, { + .eraseblocks = { {32 * 1024, 4} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {128 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_bp1_srwd, + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_256, + .read = spi_chip_read, /* Fast read (0x0B) supported */ + .voltage = {2700, 3600}, + }, + + { + .vendor = "PMC", + .name = "Pm25LV010A", + .bustype = BUS_SPI, + .manufacture_id = PMC_ID, + .model_id = PMC_PM25LV010, + .total_size = 128, + .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, + .tested = TEST_OK_PREW, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 32} }, + .block_erase = spi_block_erase_d7, + }, { + .eraseblocks = { {32 * 1024, 4} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {128 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_bp1_srwd, + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_256, + .read = spi_chip_read, /* Fast read (0x0B) supported */ + .voltage = {2700, 3600}, + }, + + { + .vendor = "PMC", + .name = "Pm25LV020", + .bustype = BUS_SPI, + .manufacture_id = PMC_ID, + .model_id = PMC_PM25LV020, + .total_size = 256, + .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 64} }, + .block_erase = spi_block_erase_d7, + }, { + .eraseblocks = { {64 * 1024, 4} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {256 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_bp2_srwd, + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_256, + .read = spi_chip_read, + .voltage = {2700, 3600}, + }, + + { + .vendor = "PMC", + .name = "Pm25LV040", + .bustype = BUS_SPI, + .manufacture_id = PMC_ID, + .model_id = PMC_PM25LV040, + .total_size = 512, + .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, + .tested = TEST_OK_PREW, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 128} }, + .block_erase = spi_block_erase_d7, + }, { + .eraseblocks = { {64 * 1024, 8} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {512 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_bp2_srwd, + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_256, + .read = spi_chip_read, /* Fast read (0x0B) supported */ + .voltage = {2700, 3600}, + }, + + { + .vendor = "PMC", + .name = "Pm25LV080B", + .bustype = BUS_SPI, + .manufacture_id = PMC_ID, + .model_id = PMC_PM25LV080B, + .total_size = 1024, + .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 256} }, + .block_erase = spi_block_erase_d7, + }, { + .eraseblocks = { {4 * 1024, 256} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {64 * 1024, 16} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {1024 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {1024 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_bp2_srwd, + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_256, + .read = spi_chip_read, /* Fast read (0x0B) supported */ + .voltage = {2700, 3600}, + }, + + { + .vendor = "PMC", + .name = "Pm25LV016B", + .bustype = BUS_SPI, + .manufacture_id = PMC_ID, + .model_id = PMC_PM25LV016B, + .total_size = 2048, + .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 512} }, + .block_erase = spi_block_erase_d7, + }, { + .eraseblocks = { {4 * 1024, 512} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {64 * 1024, 32} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {2 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {2 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_bp2_srwd, + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_256, + .read = spi_chip_read, /* Fast read (0x0B) supported */ + .voltage = {2700, 3600}, + }, + + { + .vendor = "PMC", + .name = "Pm29F002T", + .bustype = BUS_PARALLEL, + .manufacture_id = PMC_ID_NOPREFIX, + .model_id = PMC_PM29F002T, + .total_size = 256, + .page_size = 8 * 1024, + .feature_bits = FEATURE_ADDR_2AA | FEATURE_EITHER_RESET, + .tested = TEST_OK_PREW, + .probe = probe_jedec, + .probe_timing = TIMING_FIXME, + .block_erasers = + { + { + .eraseblocks = { + {128 * 1024, 1}, + {96 * 1024, 1}, + {8 * 1024, 2}, + {16 * 1024, 1}, + }, + .block_erase = erase_sector_jedec, + }, { + .eraseblocks = { {256 * 1024, 1} }, + .block_erase = erase_chip_block_jedec, + }, + }, + .write = write_jedec_1, + .read = read_memmapped, + .voltage = {4500, 5500}, + }, + + { + .vendor = "PMC", + .name = "Pm29F002B", + .bustype = BUS_PARALLEL, + .manufacture_id = PMC_ID_NOPREFIX, + .model_id = PMC_PM29F002B, + .total_size = 256, + .page_size = 8 * 1024, + .feature_bits = FEATURE_ADDR_2AA | FEATURE_EITHER_RESET, + .tested = TEST_UNTESTED, + .probe = probe_jedec, + .probe_timing = TIMING_FIXME, + .block_erasers = + { + { + .eraseblocks = { + {16 * 1024, 1}, + {8 * 1024, 2}, + {96 * 1024, 1}, + {128 * 1024, 1}, + }, + .block_erase = erase_sector_jedec, + }, { + .eraseblocks = { {256 * 1024, 1} }, + .block_erase = erase_chip_block_jedec, + }, + }, + .write = write_jedec_1, + .read = read_memmapped, + .voltage = {4500, 5500}, + }, + + { + .vendor = "PMC", + .name = "Pm39LV010", + .bustype = BUS_PARALLEL, + .manufacture_id = PMC_ID_NOPREFIX, + .model_id = PMC_PM39F010, /* Pm39LV010 and Pm39F010 have identical IDs but different voltage */ + .total_size = 128, + .page_size = 4096, + .feature_bits = FEATURE_ADDR_2AA | FEATURE_EITHER_RESET, + .tested = TEST_OK_PREW, + .probe = probe_jedec, + .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 32} }, + .block_erase = erase_sector_jedec, + }, { + .eraseblocks = { {64 * 1024, 2} }, + .block_erase = erase_block_jedec, + }, { + .eraseblocks = { {128 * 1024, 1} }, + .block_erase = erase_chip_block_jedec, + } + }, + .write = write_jedec_1, + .read = read_memmapped, + .voltage = {2700, 3600}, + }, + + { + .vendor = "PMC", + .name = "Pm39LV020", + .bustype = BUS_PARALLEL, + .manufacture_id = PMC_ID_NOPREFIX, + .model_id = PMC_PM39LV020, + .total_size = 256, + .page_size = 4096, + .feature_bits = FEATURE_ADDR_2AA | FEATURE_EITHER_RESET, + .tested = TEST_UNTESTED, + .probe = probe_jedec, + .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 64} }, + .block_erase = erase_sector_jedec, + }, { + .eraseblocks = { {64 * 1024, 4} }, + .block_erase = erase_block_jedec, + }, { + .eraseblocks = { {256 * 1024, 1} }, + .block_erase = erase_chip_block_jedec, + } + }, + .write = write_jedec_1, + .read = read_memmapped, + .voltage = {2700, 3600}, + }, + + { + .vendor = "PMC", + .name = "Pm39LV040", + .bustype = BUS_PARALLEL, + .manufacture_id = PMC_ID_NOPREFIX, + .model_id = PMC_PM39LV040, + .total_size = 512, + .page_size = 4096, + .feature_bits = FEATURE_ADDR_2AA | FEATURE_EITHER_RESET, + .tested = TEST_OK_PR, + .probe = probe_jedec, + .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 128} }, + .block_erase = erase_sector_jedec, + }, { + .eraseblocks = { {64 * 1024, 8} }, + .block_erase = erase_block_jedec, + }, { + .eraseblocks = { {512 * 1024, 1} }, + .block_erase = erase_chip_block_jedec, + } + }, + .write = write_jedec_1, + .read = read_memmapped, + .voltage = {2700, 3600}, + }, + + { + .vendor = "PMC", + .name = "Pm39LV512", + .bustype = BUS_PARALLEL, + .manufacture_id = PMC_ID_NOPREFIX, + .model_id = PMC_PM39LV512, + .total_size = 64, + .page_size = 4096, + .feature_bits = FEATURE_ADDR_2AA | FEATURE_EITHER_RESET, + .tested = TEST_OK_PREW, + .probe = probe_jedec, + .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 16} }, + .block_erase = erase_sector_jedec, + }, { + .eraseblocks = { {64 * 1024, 1} }, + .block_erase = erase_block_jedec, + }, { + .eraseblocks = { {64 * 1024, 1} }, + .block_erase = erase_chip_block_jedec, + } + }, + .write = write_jedec_1, + .read = read_memmapped, + .voltage = {2700, 3600}, + }, + + { + .vendor = "PMC", + .name = "Pm49FL002", + .bustype = BUS_LPC | BUS_FWH, /* A/A Mux */ + .manufacture_id = PMC_ID_NOPREFIX, + .model_id = PMC_PM49FL002, + .total_size = 256, + .page_size = 16 * 1024, + .feature_bits = FEATURE_REGISTERMAP | FEATURE_EITHER_RESET, + .tested = TEST_OK_PREW, + .probe = probe_jedec, + .probe_timing = TIMING_ZERO, /* routine is wrapper to probe_jedec (pm49fl00x.c) */ + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 64} }, + .block_erase = erase_sector_jedec, + }, { + .eraseblocks = { {16 * 1024, 16} }, + .block_erase = erase_block_jedec, + }, { + .eraseblocks = { {256 * 1024, 1} }, + .block_erase = erase_chip_block_jedec, + } + }, + .unlock = unlock_49fl00x, + .write = write_jedec_1, + .read = read_memmapped, + .voltage = {3000, 3600}, + }, + + { + .vendor = "PMC", + .name = "Pm49FL004", + .bustype = BUS_LPC | BUS_FWH, /* A/A Mux */ + .manufacture_id = PMC_ID_NOPREFIX, + .model_id = PMC_PM49FL004, + .total_size = 512, + .page_size = 64 * 1024, + .feature_bits = FEATURE_REGISTERMAP | FEATURE_EITHER_RESET, + .tested = TEST_OK_PREW, + .probe = probe_jedec, + .probe_timing = TIMING_ZERO, /* routine is wrapper to probe_jedec (pm49fl00x.c) */ + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 128} }, + .block_erase = erase_sector_jedec, + }, { + .eraseblocks = { {64 * 1024, 8} }, + .block_erase = erase_block_jedec, + }, { + .eraseblocks = { {512 * 1024, 1} }, + .block_erase = erase_chip_block_jedec, + } + }, + .unlock = unlock_49fl00x, + .write = write_jedec_1, + .read = read_memmapped, + .voltage = {3000, 3600}, + }, + + { + .vendor = "Sanyo", + .name = "LE25FW106", + .bustype = BUS_SPI, + .manufacture_id = SANYO_ID, + .model_id = SANYO_LE25FW106, + .total_size = 128, + .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, + .tested = TEST_OK_PREW, + .probe = probe_spi_res2, + .probe_timing = TIMING_ZERO, + .block_erasers = { + { + .eraseblocks = { {2 * 1024, 64} }, + .block_erase = spi_block_erase_d7, + }, { + .eraseblocks = { {32 * 1024, 4} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {128 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_bp1_srwd, /* FIXME: Add ERSER error flag. */ + .unlock = spi_disable_blockprotect_bp1_srwd, + .write = spi_chip_write_256, + .read = spi_chip_read, + .voltage = {2700, 3600}, + }, + + { + .vendor = "Sanyo", + .name = "LE25FW406A", + .bustype = BUS_SPI, + .manufacture_id = SANYO_ID, + .model_id = SANYO_LE25FW406A, + .total_size = 512, + .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, + .tested = TEST_OK_PREW, + .probe = probe_spi_res2, + .probe_timing = TIMING_ZERO, + .block_erasers = { + { + .eraseblocks = { {4 * 1024, 128} }, + .block_erase = spi_block_erase_d7, + }, { + .eraseblocks = { {64 * 1024, 8} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {512 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_plain, + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_256, + .read = spi_chip_read, + .voltage = {2700, 3600}, + }, + + { + .vendor = "Sanyo", + .name = "LE25FU406B", + .bustype = BUS_SPI, + .manufacture_id = SANYO_ID, + .model_id = SANYO_LE25FU406B, + .total_size = 512, + .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, + .tested = TEST_OK_PREW, + .probe = probe_spi_res2, + .probe_timing = TIMING_ZERO, + .block_erasers = { + { + .eraseblocks = { {4 * 1024, 128} }, + .block_erase = spi_block_erase_d7, + }, { + .eraseblocks = { {64 * 1024, 8} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {512 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_bp2_srwd, + .unlock = spi_disable_blockprotect, /* #WP pin write-protects SRWP bit. */ + .write = spi_chip_write_256, + .read = spi_chip_read, + .voltage = {2300, 3600}, + }, + + { + .vendor = "Sanyo", + .name = "LE25FW203A", + .bustype = BUS_SPI, + .manufacture_id = SANYO_ID, + .model_id = SANYO_LE25FW203A, + .total_size = 256, + .page_size = 256, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {256, 1024} }, + .block_erase = spi_block_erase_db, + }, { + .eraseblocks = { {64 * 1024, 4} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {256 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_default_welwip, + .unlock = NULL, /* #WP pin write-protects lower 64kB. */ + .write = spi_chip_write_256, + .read = spi_chip_read, + .voltage = {2700, 3600}, + }, + + { + .vendor = "Sanyo", + .name = "LE25FW403A", + .bustype = BUS_SPI, + .manufacture_id = SANYO_ID, + .model_id = SANYO_LE25FW403A, + .total_size = 512, + .page_size = 256, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = { + { + .eraseblocks = { {256, 2 * 1024} }, + .block_erase = spi_block_erase_db, + }, { + .eraseblocks = { {64 * 1024, 8} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {512 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_default_welwip, + .unlock = NULL, /* #WP pin write-protects lower 64kB. */ + .write = spi_chip_write_256, + .read = spi_chip_read, + .voltage = {2700, 3600}, + }, + + { + .vendor = "Sanyo", + .name = "LE25FW418A", + .bustype = BUS_SPI, + .manufacture_id = SANYO_ID, + .model_id = SANYO_LE25FW418A, + .total_size = 512, + .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, + .tested = TEST_UNTESTED, + .probe = probe_spi_res2, + .probe_timing = TIMING_ZERO, + .block_erasers = { + { + .eraseblocks = { {4 * 1024, 128} }, + .block_erase = spi_block_erase_d7, + }, { + .eraseblocks = { {64 * 1024, 8} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {512 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_bp2_srwd, + .unlock = spi_disable_blockprotect, /* #WP pin write-protects SRWP bit. */ + .write = spi_chip_write_256, + .read = spi_chip_read, /* some quad-read supported ("HD_READ mode") */ + .voltage = {2700, 3600}, + }, + + { + .vendor = "Sanyo", + .name = "LE25FW806", + .bustype = BUS_SPI, + .manufacture_id = SANYO_ID, + .model_id = SANYO_LE25FW806, + .total_size = 1024, + .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, + .tested = TEST_UNTESTED, + .probe = probe_spi_res2, + .probe_timing = TIMING_ZERO, + .block_erasers = { + { + .eraseblocks = { {4 * 1024, 256} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {4 * 1024, 256} }, + .block_erase = spi_block_erase_d7, + }, { + .eraseblocks = { {64 * 1024, 16} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {1024 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_bp2_srwd, + .unlock = spi_disable_blockprotect, /* #WP pin write-protects SRWP bit. */ + .write = spi_chip_write_256, + .read = spi_chip_read, + .voltage = {2700, 3600}, + }, + + { + .vendor = "Sanyo", + .name = "LE25FW808", + .bustype = BUS_SPI, + .manufacture_id = SANYO_ID, + .model_id = SANYO_LE25FW808, + .total_size = 1024, + .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, + .tested = TEST_UNTESTED, + .probe = probe_spi_res2, + .probe_timing = TIMING_ZERO, + .block_erasers = { + { + .eraseblocks = { {8 * 1024, 128} }, + .block_erase = spi_block_erase_d7, + }, { + .eraseblocks = { {64 * 1024, 16} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {1024 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_bp2_srwd, + .unlock = spi_disable_blockprotect, /* #WP pin write-protects SRWP bit. */ + .write = spi_chip_write_256, + .read = spi_chip_read, /* some quad-read supported ("HD_READ mode") */ + .voltage = {2700, 3600}, + }, + + { + .vendor = "Sharp", + .name = "LH28F008BJT-BTLZ1", + .bustype = BUS_PARALLEL, + .manufacture_id = SHARP_ID, + .model_id = SHARP_LH28F008BJ__PB, + .total_size = 1024, + .page_size = 64 * 1024, + .tested = TEST_OK_PREW, + .probe = probe_82802ab, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { + {8 * 1024, 8}, + {64 * 1024, 15} + }, + .block_erase = erase_block_82802ab, + }, { + .eraseblocks = { {1024 * 1024, 1} }, + .block_erase = erase_sector_49lfxxxc, + } + }, + .unlock = unlock_lh28f008bjt, + .write = write_82802ab, + .read = read_memmapped, + .voltage = {2700, 3600}, + }, + + { + .vendor = "Sharp", + .name = "LHF00L04", + .bustype = BUS_FWH, /* A/A Mux */ + .manufacture_id = SHARP_ID, + .model_id = SHARP_LHF00L04, + .total_size = 1024, + .page_size = 64 * 1024, + .feature_bits = FEATURE_EITHER_RESET | FEATURE_REGISTERMAP, + .tested = TEST_UNTESTED, + .probe = probe_82802ab, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { + {64 * 1024, 15}, + {8 * 1024, 8} + }, + .block_erase = erase_block_82802ab, + }, { + .eraseblocks = { + {1024 * 1024, 1} + }, + .block_erase = NULL, /* 30 D0, only in A/A mux mode */ + }, + }, + .unlock = unlock_82802ab, + .write = write_82802ab, + .read = read_memmapped, + .voltage = {3000, 3600}, + }, + + { + .vendor = "Spansion", + .name = "S25FL004A", + .bustype = BUS_SPI, + .manufacture_id = SPANSION_ID, + .model_id = SPANSION_S25FL004A, + .total_size = 512, + .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {64 * 1024, 8} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {512 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_256, + .read = spi_chip_read, + .voltage = {2700, 3600}, + }, + + { + .vendor = "Spansion", + .name = "S25FL008A", + .bustype = BUS_SPI, + .manufacture_id = SPANSION_ID, + .model_id = SPANSION_S25FL008A, + .total_size = 1024, + .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, + .tested = TEST_OK_PRE, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {64 * 1024, 16} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {1024 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_256, + .read = spi_chip_read, + .voltage = {2700, 3600}, + }, + + { + .vendor = "Spansion", + .name = "S25FL016A", + .bustype = BUS_SPI, + .manufacture_id = SPANSION_ID, + .model_id = SPANSION_S25FL016A, + .total_size = 2048, + .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, + .tested = TEST_OK_PR, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {64 * 1024, 32} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {2 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_256, + .read = spi_chip_read, + .voltage = {2700, 3600}, + }, + + { + .vendor = "Spansion", + .name = "S25FL032A/P", + .bustype = BUS_SPI, + .manufacture_id = SPANSION_ID, + .model_id = SPANSION_S25FL032A, + .total_size = 4096, + .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, + .tested = TEST_OK_PREW, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {64 * 1024, 64} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {4 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_256, + .read = spi_chip_read, + .voltage = {2700, 3600}, + }, + + { + .vendor = "Spansion", + .name = "S25FL064A/P", + .bustype = BUS_SPI, + .manufacture_id = SPANSION_ID, + .model_id = SPANSION_S25FL064A, + .total_size = 8192, + .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, + .tested = TEST_OK_PREW, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {64 * 1024, 128} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {8 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_256, + .read = spi_chip_read, + .voltage = {2700, 3600}, + }, + + { + .vendor = "Spansion", + .name = "S25FL204K", + .bustype = BUS_SPI, + .manufacture_id = SPANSION_ID, + .model_id = SPANSION_S25FL204, + .total_size = 512, + .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = { + { + .eraseblocks = { {4 * 1024, 128} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {64 * 1024, 8} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { { 512 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { { 512 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_bp3_srwd, + .unlock = spi_disable_blockprotect_bp3_srwd, /* #WP pin write-protects SRWP bit. */ + .write = spi_chip_write_256, + .read = spi_chip_read, /* Fast read (0x0B), dual I/O (0x3B) supported */ + .voltage = {2700, 3600}, + }, + + { + .vendor = "Spansion", + .name = "S25FL208K", + .bustype = BUS_SPI, + .manufacture_id = SPANSION_ID, + .model_id = SPANSION_S25FL208, + .total_size = 1024, + .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = { + { + .eraseblocks = { {4 * 1024, 256} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {64 * 1024, 16} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { { 1024 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { { 1024 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_bp3_srwd, + .unlock = spi_disable_blockprotect_bp3_srwd, /* #WP pin write-protects SRWP bit. */ + .write = spi_chip_write_256, + .read = spi_chip_read, /* Fast read (0x0B), dual I/O (0x3B) supported */ + .voltage = {2700, 3600}, + }, + + { + .vendor = "Spansion", + .name = "S25FL116K/S25FL216K", + .bustype = BUS_SPI, + .manufacture_id = SPANSION_ID, + .model_id = SPANSION_S25FL216, + .total_size = 2048, + .page_size = 256, + /* OTP: 1024B total, 256B reserved; read 0x48; write 0x42, erase 0x44 (S25FL116K only) */ + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = { + { + .eraseblocks = { {4 * 1024, 512} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {64 * 1024, 32} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { { 2048 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { { 2048 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_bp3_srwd, + .unlock = spi_disable_blockprotect_bp3_srwd, /* #WP pin write-protects SRWP bit. */ + .write = spi_chip_write_256, + .read = spi_chip_read, /* Fast read (0x0B), dual I/O (0x3B) supported */ + .voltage = {2700, 3600}, + }, + + { + .vendor = "Spansion", + .name = "S25FL132K", + .bustype = BUS_SPI, + .manufacture_id = SPANSION_ID, + .model_id = SPANSION_S25FL132K, + .total_size = 4096, + .page_size = 256, + /* OTP: 768B total, 256B reserved; read 0x48; write 0x42, erase 0x44 */ + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = { + { + .eraseblocks = { {4 * 1024, 1024} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {64 * 1024, 64} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { { 4096 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { { 4096 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_bp2_srwd, /* TODO: improve */ + .unlock = spi_disable_blockprotect_bp2_srwd, /* #WP pin write-protects SRWP bit. */ + .write = spi_chip_write_256, + .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ + .voltage = {2700, 3600}, + }, + + { + .vendor = "Spansion", + .name = "S25FL164K", + .bustype = BUS_SPI, + .manufacture_id = SPANSION_ID, + .model_id = SPANSION_S25FL164K, + .total_size = 8192, + .page_size = 256, + /* OTP: 1024B total, 256B reserved; read 0x48; write 0x42, erase 0x44 */ + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, + .tested = TEST_OK_PREW, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = { + { + .eraseblocks = { {4 * 1024, 2048} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {64 * 1024, 128} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { { 8192 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { { 8192 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_bp2_srwd, /* TODO: improve */ + .unlock = spi_disable_blockprotect_bp2_srwd, /* #WP pin write-protects SRWP bit. */ + .write = spi_chip_write_256, + .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ + .voltage = {2700, 3600}, + }, + + { + .vendor = "Spansion", + .name = "S25FL128S......0", /* uniform 256kB sectors */ + .bustype = BUS_SPI, + .manufacture_id = SPANSION_ID, + .model_id = SPANSION_S25FL128, + .total_size = 16384, + .page_size = 256, + /* supports 4B addressing */ + /* OTP: 1024B total, 32B reserved; read 0x4B; write 0x42 */ + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = { + { + .eraseblocks = { {4 * 1024, 4096} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {256 * 1024, 64} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { { 16384 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { { 16384 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_bp2_ep_srwd, /* TODO: SR2 and many others */ + .unlock = spi_disable_blockprotect_bp2_srwd, /* TODO: various other locks */ + .write = spi_chip_write_256, /* Multi I/O supported */ + .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ + .voltage = {2700, 3600}, + }, + + { + .vendor = "SST", + .name = "SST25LF020A", + .bustype = BUS_SPI, + .manufacture_id = SST_ID, + .model_id = SST_SST25VF020_REMS, + .total_size = 256, + .page_size = 256, + .feature_bits = FEATURE_WRSR_EWSR, + .tested = TEST_OK_PREW, + .probe = probe_spi_rems, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 64} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {32 * 1024, 8} }, + .block_erase = spi_block_erase_52, + }, { + .eraseblocks = { {256 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, + }, + .printlock = spi_prettyprint_status_register_sst25, /* FIXME: No BP2 & 3 */ + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_1, /* AAI supported, but opcode is 0xAF */ + .read = spi_chip_read, /* Fast read (0x0B) supported */ + .voltage = {2700, 3600}, + }, + + { + .vendor = "SST", + .name = "SST25LF040A", + .bustype = BUS_SPI, + .manufacture_id = SST_ID, + .model_id = SST_SST25VF040_REMS, + .total_size = 512, + .page_size = 256, + .feature_bits = FEATURE_WRSR_EWSR, + .tested = TEST_OK_PREW, + .probe = probe_spi_res2, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 128} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {32 * 1024, 16} }, + .block_erase = spi_block_erase_52, + }, { + .eraseblocks = { {512 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, + }, + .printlock = spi_prettyprint_status_register_sst25, /* TODO: check */ + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_1, /* AAI supported, but opcode is 0xAF */ + .read = spi_chip_read, + .voltage = {3000, 3600}, + }, + + { + .vendor = "SST", + .name = "SST25LF080(A)", + .bustype = BUS_SPI, + .manufacture_id = SST_ID, + .model_id = SST_SST25VF080_REMS, + .total_size = 1024, + .page_size = 256, + .feature_bits = FEATURE_WRSR_EITHER, + .tested = TEST_UNTESTED, + .probe = probe_spi_res2, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 256} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {32 * 1024, 32} }, + .block_erase = spi_block_erase_52, + }, { + .eraseblocks = { {1024 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, + }, + .printlock = spi_prettyprint_status_register_sst25, /* TODO: check */ + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_1, /* AAI supported, but opcode is 0xAF */ + .read = spi_chip_read, + .voltage = {3000, 3600}, + }, + + { + .vendor = "SST", + .name = "SST25VF512A", + .bustype = BUS_SPI, + .manufacture_id = SST_ID, + .model_id = SST_SST25VF512A_REMS, + .total_size = 64, + .page_size = 256, + .feature_bits = FEATURE_WRSR_EWSR, + .tested = TEST_OK_PREW, + .probe = probe_spi_rems, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 16} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {32 * 1024, 2} }, + .block_erase = spi_block_erase_52, + }, { + .eraseblocks = { {32 * 1024, 2} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {64 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {64 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + }, + }, + .printlock = spi_prettyprint_status_register_sst25, /* FIXME: No BP2 & 3 */ + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_1, /* AAI supported, but opcode is 0xAF */ + .read = spi_chip_read, /* Fast read (0x0B) supported */ + .voltage = {2700, 3600}, + }, + + { + .vendor = "SST", + .name = "SST25VF010", + .bustype = BUS_SPI, + .manufacture_id = SST_ID, + .model_id = SST_SST25VF010_REMS, + .total_size = 128, + .page_size = 256, + .feature_bits = FEATURE_WRSR_EWSR, + .tested = TEST_OK_PREW, + .probe = probe_spi_rems, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 32} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {32 * 1024, 4} }, + .block_erase = spi_block_erase_52, + }, { + .eraseblocks = { {32 * 1024, 4} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {128 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {128 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + }, + }, + .printlock = spi_prettyprint_status_register_sst25, /* FIXME: No BP2 & 3 */ + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_1, /* AAI supported, but opcode is 0xAF */ + .read = spi_chip_read, /* Fast read (0x0B) supported */ + .voltage = {2700, 3600}, + }, + + { + .vendor = "SST", + .name = "SST25VF020", + .bustype = BUS_SPI, + .manufacture_id = SST_ID, + .model_id = SST_SST25VF020_REMS, + .total_size = 256, + .page_size = 256, + .feature_bits = FEATURE_WRSR_EWSR, + .tested = TEST_UNTESTED, + .probe = probe_spi_rems, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 64} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {32 * 1024, 8} }, + .block_erase = spi_block_erase_52, + }, { + .eraseblocks = { {256 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, + }, + .printlock = spi_prettyprint_status_register_sst25, /* FIXME: No BP2 & 3 */ + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_1, /* AAI supported, but opcode is 0xAF */ + .read = spi_chip_read, /* only */ + .voltage = {2700, 3600}, + }, + + { + .vendor = "SST", + .name = "SST25VF020B", + .bustype = BUS_SPI, + .manufacture_id = SST_ID, + .model_id = SST_SST25VF020B, + .total_size = 256, + .page_size = 256, + .feature_bits = FEATURE_WRSR_EWSR, + .tested = TEST_OK_PREW, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 64} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {32 * 1024, 8} }, + .block_erase = spi_block_erase_52, + }, { + .eraseblocks = { {64 * 1024, 4} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {256 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {256 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + }, + }, + .printlock = spi_prettyprint_status_register_sst25, /* FIXME: No BP2 & 3 and 2nd SR */ + .unlock = spi_disable_blockprotect, /* FIXME: 2nd SR */ + .write = spi_aai_write, /* AAI supported (0xAD) */ + .read = spi_chip_read, /* Fast read (0x0B) supported */ + .voltage = {2700, 3600}, + }, + + { + .vendor = "SST", + .name = "SST25VF040", + .bustype = BUS_SPI, + .manufacture_id = SST_ID, + .model_id = SST_SST25VF040_REMS, + .total_size = 512, + .page_size = 256, + .feature_bits = FEATURE_WRSR_EWSR, + .tested = TEST_OK_PR, + .probe = probe_spi_rems, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 128} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {32 * 1024, 16} }, + .block_erase = spi_block_erase_52, + }, { + .eraseblocks = { {512 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, + }, + .printlock = spi_prettyprint_status_register_sst25, /* TODO: check */ + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_1, /* AAI supported, but opcode is 0xAF */ + .read = spi_chip_read, + .voltage = {2700, 3600}, + }, + + { + .vendor = "SST", + .name = "SST25VF040B", + .bustype = BUS_SPI, + .manufacture_id = SST_ID, + .model_id = SST_SST25VF040B, + .total_size = 512, + .page_size = 256, + .feature_bits = FEATURE_WRSR_EWSR, + .tested = TEST_OK_PREW, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 128} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {32 * 1024, 16} }, + .block_erase = spi_block_erase_52, + }, { + .eraseblocks = { {64 * 1024, 8} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {512 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {512 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + }, + }, + .printlock = spi_prettyprint_status_register_sst25vf040b, + .unlock = spi_disable_blockprotect, + .write = spi_aai_write, /* AAI supported (0xAD) */ + .read = spi_chip_read, /* Fast read (0x0B) supported */ + .voltage = {2700, 3600}, + }, + + { + .vendor = "SST", + .name = "SST25VF040B.REMS", + .bustype = BUS_SPI, + .manufacture_id = SST_ID, + .model_id = SST_SST25VF040B_REMS, + .total_size = 512, + .page_size = 256, + .feature_bits = FEATURE_WRSR_EWSR, + .tested = TEST_OK_PREW, + .probe = probe_spi_rems, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 128} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {32 * 1024, 16} }, + .block_erase = spi_block_erase_52, + }, { + .eraseblocks = { {64 * 1024, 8} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {512 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {512 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + }, + }, + .printlock = spi_prettyprint_status_register_sst25vf040b, + .unlock = spi_disable_blockprotect, + .write = spi_aai_write, + .read = spi_chip_read, + .voltage = {2700, 3600}, + }, + + { + .vendor = "SST", + .name = "SST25VF080B", + .bustype = BUS_SPI, + .manufacture_id = SST_ID, + .model_id = SST_SST25VF080B, + .total_size = 1024, + .page_size = 256, + .feature_bits = FEATURE_WRSR_EWSR, + .tested = TEST_OK_PREW, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 256} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {32 * 1024, 32} }, + .block_erase = spi_block_erase_52, + }, { + .eraseblocks = { {64 * 1024, 16} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {1024 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {1024 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + }, + }, + .printlock = spi_prettyprint_status_register_sst25, /* TODO: check */ + .unlock = spi_disable_blockprotect, + .write = spi_aai_write, + .read = spi_chip_read, + .voltage = {2700, 3600}, + }, + + { + .vendor = "SST", + .name = "SST25VF016B", + .bustype = BUS_SPI, + .manufacture_id = SST_ID, + .model_id = SST_SST25VF016B, + .total_size = 2048, + .page_size = 256, + .feature_bits = FEATURE_WRSR_EITHER, + .tested = TEST_OK_PREW, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 512} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {32 * 1024, 64} }, + .block_erase = spi_block_erase_52, + }, { + .eraseblocks = { {64 * 1024, 32} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {2 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {2 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + }, + }, + .printlock = spi_prettyprint_status_register_sst25vf016, + .unlock = spi_disable_blockprotect, + .write = spi_aai_write, + .read = spi_chip_read, + .voltage = {2700, 3600}, + }, + + { + .vendor = "SST", + .name = "SST25VF032B", + .bustype = BUS_SPI, + .manufacture_id = SST_ID, + .model_id = SST_SST25VF032B, + .total_size = 4096, + .page_size = 256, + .feature_bits = FEATURE_WRSR_EWSR, + .tested = TEST_OK_PREW, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 1024} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {32 * 1024, 128} }, + .block_erase = spi_block_erase_52, + }, { + .eraseblocks = { {64 * 1024, 64} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {4 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {4 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + }, + }, + .printlock = spi_prettyprint_status_register_sst25, /* TODO: check */ + .unlock = spi_disable_blockprotect, + .write = spi_aai_write, + .read = spi_chip_read, + .voltage = {2700, 3600}, + }, + + { + .vendor = "SST", + .name = "SST25VF064C", + .bustype = BUS_SPI, + .manufacture_id = SST_ID, + .model_id = SST_SST25VF064C, + .total_size = 8192, + .page_size = 256, + .feature_bits = FEATURE_WRSR_EWSR, + .tested = TEST_OK_PREW, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 2048} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {32 * 1024, 256} }, + .block_erase = spi_block_erase_52, + }, { + .eraseblocks = { {64 * 1024, 128} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {8 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {8 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + }, + }, + .printlock = spi_prettyprint_status_register_sst25, /* TODO: check */ + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_256, + .read = spi_chip_read, + .voltage = {2700, 3600}, + }, + + { + .vendor = "SST", + .name = "SST25WF512", + .bustype = BUS_SPI, + .manufacture_id = SST_ID, + .model_id = SST_SST25WF512, + .total_size = 64, + .page_size = 256, + .feature_bits = FEATURE_WRSR_EITHER, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 16} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {32 * 1024, 2} }, + .block_erase = spi_block_erase_52, + }, { + .eraseblocks = { {1024 * 64, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {1024 * 64, 1} }, + .block_erase = spi_block_erase_c7, + }, + }, + .printlock = spi_prettyprint_status_register_sst25, /* FIXME: does not have a BP3 */ + .unlock = spi_disable_blockprotect_bp2_srwd, + .write = spi_aai_write, + .read = spi_chip_read, /* Fast read (0x0B) supported */ + .voltage = {1650, 1950}, + }, + + { + .vendor = "SST", + .name = "SST25WF010", + .bustype = BUS_SPI, + .manufacture_id = SST_ID, + .model_id = SST_SST25WF010, + .total_size = 128, + .page_size = 256, + .feature_bits = FEATURE_WRSR_EITHER, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 32} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {32 * 1024, 4} }, + .block_erase = spi_block_erase_52, + }, { + .eraseblocks = { {1024 * 128, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {1024 * 128, 1} }, + .block_erase = spi_block_erase_c7, + }, + }, + .printlock = spi_prettyprint_status_register_sst25, /* FIXME: does not have a BP3 */ + .unlock = spi_disable_blockprotect_bp2_srwd, + .write = spi_aai_write, + .read = spi_chip_read, /* Fast read (0x0B) supported */ + .voltage = {1650, 1950}, + }, + + { + .vendor = "SST", + .name = "SST25WF020", + .bustype = BUS_SPI, + .manufacture_id = SST_ID, + .model_id = SST_SST25WF020, + .total_size = 256, + .page_size = 256, + .feature_bits = FEATURE_WRSR_EITHER, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 64} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {32 * 1024, 8} }, + .block_erase = spi_block_erase_52, + }, { + .eraseblocks = { {64 * 1024, 4} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {1024 * 256, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {1024 * 256, 1} }, + .block_erase = spi_block_erase_c7, + }, + }, + .printlock = spi_prettyprint_status_register_sst25, /* FIXME: does not have a BP3 */ + .unlock = spi_disable_blockprotect_bp2_srwd, + .write = spi_aai_write, + .read = spi_chip_read, /* Fast read (0x0B) supported */ + .voltage = {1650, 1950}, + }, + + { + .vendor = "SST", + .name = "SST25WF040", + .bustype = BUS_SPI, + .manufacture_id = SST_ID, + .model_id = SST_SST25WF040, + .total_size = 512, + .page_size = 256, + .feature_bits = FEATURE_WRSR_EITHER, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 128} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {32 * 1024, 16} }, + .block_erase = spi_block_erase_52, + }, { + .eraseblocks = { {64 * 1024, 8} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {1024 * 512, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {1024 * 512, 1} }, + .block_erase = spi_block_erase_c7, + }, + }, + .printlock = spi_prettyprint_status_register_sst25, /* FIXME: does not have a BP3 */ + .unlock = spi_disable_blockprotect_bp2_srwd, + .write = spi_aai_write, + .read = spi_chip_read, /* Fast read (0x0B) supported */ + .voltage = {1650, 1950}, + }, + + { + .vendor = "SST", + .name = "SST25WF080", + .bustype = BUS_SPI, + .manufacture_id = SST_ID, + .model_id = SST_SST25WF080, + .total_size = 1024, + .page_size = 256, + .feature_bits = FEATURE_WRSR_EITHER, + .tested = TEST_OK_PREW, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 256} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {32 * 1024, 32} }, + .block_erase = spi_block_erase_52, + }, { + .eraseblocks = { {64 * 1024, 16} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {1024 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {1024 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + }, + }, + .printlock = spi_prettyprint_status_register_sst25, /* *does* have a BP3 but it is useless */ + .unlock = spi_disable_blockprotect_bp3_srwd, + .write = spi_aai_write, + .read = spi_chip_read, /* Fast read (0x0B) supported */ + .voltage = {1650, 1950}, + }, + + { + .vendor = "SST", + .name = "SST28SF040A", + .bustype = BUS_PARALLEL, + .manufacture_id = SST_ID, + .model_id = SST_SST28SF040, + .total_size = 512, + .page_size = 256, + .feature_bits = 0, + .tested = TEST_UNTESTED, + .probe = probe_82802ab, + .probe_timing = TIMING_IGNORED, /* routine doesn't use probe_timing (sst28sf040.c) */ + .block_erasers = + { + { + .eraseblocks = { {128, 4096} }, + .block_erase = erase_sector_28sf040, + }, { + .eraseblocks = { {512 * 1024, 1} }, + .block_erase = erase_chip_28sf040, + } + }, + .unlock = unprotect_28sf040, + .write = write_28sf040, + .read = read_memmapped, + .voltage = {4500, 5500}, + }, + + { + .vendor = "SST", + .name = "SST29EE010", + .bustype = BUS_PARALLEL, + .manufacture_id = SST_ID, + .model_id = SST_SST29EE010, + .total_size = 128, + .page_size = 128, + .feature_bits = FEATURE_LONG_RESET, + .tested = TEST_OK_PR, + .probe = probe_jedec, + .probe_timing = 10, + .block_erasers = + { + { + .eraseblocks = { {128 * 1024, 1} }, + .block_erase = erase_chip_block_jedec, + } + }, + .write = write_jedec, + .read = read_memmapped, + .voltage = {4500, 5500}, + }, + + { + .vendor = "SST", + .name = "SST29LE010", + .bustype = BUS_PARALLEL, + .manufacture_id = SST_ID, + .model_id = SST_SST29LE010, + .total_size = 128, + .page_size = 128, + .feature_bits = FEATURE_LONG_RESET, + .tested = TEST_UNTESTED, + .probe = probe_jedec, + .probe_timing = 10, + .block_erasers = + { + { + .eraseblocks = { {128 * 1024, 1} }, + .block_erase = erase_chip_block_jedec, + } + }, + .write = write_jedec, + .read = read_memmapped, + .voltage = {3000, 3600}, + }, + + { + .vendor = "SST", + .name = "SST29EE020A", + .bustype = BUS_PARALLEL, + .manufacture_id = SST_ID, + .model_id = SST_SST29EE020A, + .total_size = 256, + .page_size = 128, + .feature_bits = FEATURE_LONG_RESET, + .tested = TEST_OK_PRE, + .probe = probe_jedec, + .probe_timing = 10, + .block_erasers = + { + { + .eraseblocks = { {256 * 1024, 1} }, + .block_erase = erase_chip_block_jedec, + } + }, + .write = write_jedec, + .read = read_memmapped, + .voltage = {4500, 5500}, + }, + + { + .vendor = "SST", + .name = "SST29LE020", + .bustype = BUS_PARALLEL, + .manufacture_id = SST_ID, + .model_id = SST_SST29LE020, + .total_size = 256, + .page_size = 128, + .feature_bits = FEATURE_LONG_RESET, + .tested = TEST_OK_PRE, + .probe = probe_jedec, + .probe_timing = 10, + .block_erasers = + { + { + .eraseblocks = { {256 * 1024, 1} }, + .block_erase = erase_chip_block_jedec, + } + }, + .write = write_jedec, + .read = read_memmapped, + .voltage = {3000, 3600}, + }, + + { + .vendor = "SST", + .name = "SST39SF512", + .bustype = BUS_PARALLEL, + .manufacture_id = SST_ID, + .model_id = SST_SST39SF512, + .total_size = 64, + .page_size = 4096, + .feature_bits = FEATURE_EITHER_RESET, + .tested = TEST_OK_PREW, + .probe = probe_jedec, + .probe_timing = 1, /* 150 ns */ + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 16} }, + .block_erase = erase_sector_jedec, + }, { + .eraseblocks = { {64 * 1024, 1} }, + .block_erase = erase_chip_block_jedec, + } + }, + .write = write_jedec_1, + .read = read_memmapped, + .voltage = {4500, 5500}, + }, + + { + .vendor = "SST", + .name = "SST39SF010A", + .bustype = BUS_PARALLEL, + .manufacture_id = SST_ID, + .model_id = SST_SST39SF010, + .total_size = 128, + .page_size = 4096, + .feature_bits = FEATURE_EITHER_RESET, + .tested = TEST_OK_PREW, + .probe = probe_jedec, + .probe_timing = 1, /* 150 ns */ + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 32} }, + .block_erase = erase_sector_jedec, + }, { + .eraseblocks = { {128 * 1024, 1} }, + .block_erase = erase_chip_block_jedec, + } + }, + .write = write_jedec_1, + .read = read_memmapped, + .voltage = {4500, 5500}, + }, + + { + .vendor = "SST", + .name = "SST39SF020A", + .bustype = BUS_PARALLEL, + .manufacture_id = SST_ID, + .model_id = SST_SST39SF020, + .total_size = 256, + .page_size = 4096, + .feature_bits = FEATURE_EITHER_RESET, + .tested = TEST_OK_PREW, + .probe = probe_jedec, + .probe_timing = 1, /* 150 ns */ + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 64} }, + .block_erase = erase_sector_jedec, + }, { + .eraseblocks = { {256 * 1024, 1} }, + .block_erase = erase_chip_block_jedec, + } + }, + .write = write_jedec_1, + .read = read_memmapped, + .voltage = {4500, 5500}, + }, + + { + .vendor = "SST", + .name = "SST39SF040", + .bustype = BUS_PARALLEL, + .manufacture_id = SST_ID, + .model_id = SST_SST39SF040, + .total_size = 512, + .page_size = 4096, + .feature_bits = FEATURE_EITHER_RESET, + .tested = TEST_OK_PREW, + .probe = probe_jedec, + .probe_timing = 1, /* 150 ns */ + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 128} }, + .block_erase = erase_sector_jedec, + }, { + .eraseblocks = { {512 * 1024, 1} }, + .block_erase = erase_chip_block_jedec, + } + }, + .write = write_jedec_1, + .read = read_memmapped, + .voltage = {4500, 5500}, + }, + + { + .vendor = "SST", + .name = "SST39VF512", + .bustype = BUS_PARALLEL, + .manufacture_id = SST_ID, + .model_id = SST_SST39VF512, + .total_size = 64, + .page_size = 4096, + .feature_bits = FEATURE_EITHER_RESET, + .tested = TEST_OK_PREW, + .probe = probe_jedec, + .probe_timing = 1, /* 150 ns */ + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 16} }, + .block_erase = erase_sector_jedec, + }, { + .eraseblocks = { {64 * 1024, 1} }, + .block_erase = erase_chip_block_jedec, + } + }, + .write = write_jedec_1, + .read = read_memmapped, + .voltage = {2700, 3600}, + }, + + { + .vendor = "SST", + .name = "SST39VF010", + .bustype = BUS_PARALLEL, + .manufacture_id = SST_ID, + .model_id = SST_SST39VF010, + .total_size = 128, + .page_size = 4096, + .feature_bits = FEATURE_EITHER_RESET, + .tested = TEST_OK_PREW, + .probe = probe_jedec, + .probe_timing = 1, /* 150 ns */ + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 32} }, + .block_erase = erase_sector_jedec, + }, { + .eraseblocks = { {128 * 1024, 1} }, + .block_erase = erase_chip_block_jedec, + } + }, + .write = write_jedec_1, + .read = read_memmapped, + .voltage = {2700, 3600}, + }, + + { + .vendor = "SST", + .name = "SST39VF020", + .bustype = BUS_PARALLEL, + .manufacture_id = SST_ID, + .model_id = SST_SST39VF020, + .total_size = 256, + .page_size = 4096, + .feature_bits = FEATURE_EITHER_RESET, + .tested = TEST_UNTESTED, + .probe = probe_jedec, + .probe_timing = 1, /* 150 ns */ + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 64} }, + .block_erase = erase_sector_jedec, + }, { + .eraseblocks = { {256 * 1024, 1} }, + .block_erase = erase_chip_block_jedec, + } + }, + .write = write_jedec_1, + .read = read_memmapped, + .voltage = {2700, 3600}, + }, + + { + .vendor = "SST", + .name = "SST39VF040", + .bustype = BUS_PARALLEL, + .manufacture_id = SST_ID, + .model_id = SST_SST39VF040, + .total_size = 512, + .page_size = 4096, + .feature_bits = FEATURE_EITHER_RESET, + .tested = TEST_UNTESTED, + .probe = probe_jedec, + .probe_timing = 1, /* 150 ns */ + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 128} }, + .block_erase = erase_sector_jedec, + }, { + .eraseblocks = { {512 * 1024, 1} }, + .block_erase = erase_chip_block_jedec, + } + }, + .write = write_jedec_1, + .read = read_memmapped, + .voltage = {2700, 3600}, + }, + + { + .vendor = "SST", + .name = "SST39VF080", + .bustype = BUS_PARALLEL, + .manufacture_id = SST_ID, + .model_id = SST_SST39VF080, + .total_size = 1024, + .page_size = 4096, + .feature_bits = FEATURE_EITHER_RESET, + .tested = TEST_UNTESTED, + .probe = probe_jedec, + .probe_timing = 1, /* 150 ns */ + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 256} }, + .block_erase = erase_sector_jedec, + }, { + .eraseblocks = { {64 * 1024, 16} }, + .block_erase = erase_block_jedec, + }, { + .eraseblocks = { {1024 * 1024, 1} }, + .block_erase = erase_chip_block_jedec, + } + }, + .write = write_jedec_1, + .read = read_memmapped, + .voltage = {2700, 3600}, + }, + + { + .vendor = "SST", + .name = "SST49LF002A/B", + .bustype = BUS_FWH, /* A/A Mux */ + .manufacture_id = SST_ID, + .model_id = SST_SST49LF002A, + .total_size = 256, + .page_size = 16 * 1024, + .feature_bits = FEATURE_REGISTERMAP | FEATURE_EITHER_RESET, + .tested = TEST_OK_PREW, + .probe = probe_jedec, + .probe_timing = 1, /* 150 ns */ + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 64} }, + .block_erase = erase_sector_jedec, + }, { + .eraseblocks = { {16 * 1024, 16} }, + .block_erase = erase_block_jedec, + }, { + .eraseblocks = { {256 * 1024, 1} }, + .block_erase = NULL, /* AA 55 80 AA 55 10, only in A/A mux mode */ + } + }, + .printlock = printlock_sst_fwhub, + .unlock = unlock_sst_fwhub, + .write = write_jedec_1, + .read = read_memmapped, + .voltage = {3000, 3600}, + }, + + { + .vendor = "SST", + .name = "SST49LF003A/B", + .bustype = BUS_FWH, /* A/A Mux */ + .manufacture_id = SST_ID, + .model_id = SST_SST49LF003A, + .total_size = 384, + .page_size = 64 * 1024, + .feature_bits = FEATURE_REGISTERMAP | FEATURE_EITHER_RESET, + .tested = TEST_OK_PREW, + .probe = probe_jedec, + .probe_timing = 1, /* 150 ns */ + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 96} }, + .block_erase = erase_sector_jedec, + }, { + .eraseblocks = { {64 * 1024, 6} }, + .block_erase = erase_block_jedec, + }, { + .eraseblocks = { {384 * 1024, 1} }, + .block_erase = NULL, /* AA 55 80 AA 55 10, only in A/A mux mode */ + } + }, + .printlock = printlock_sst_fwhub, + .unlock = unlock_sst_fwhub, + .write = write_jedec_1, + .read = read_memmapped, + .voltage = {3000, 3600}, + }, + + { + /* Contrary to the data sheet, TBL# on the SST49LF004B affects the top 128kB (instead of 64kB) + * and is only honored for 64k block erase, but not 4k sector erase. + */ + .vendor = "SST", + .name = "SST49LF004A/B", + .bustype = BUS_FWH, /* A/A Mux */ + .manufacture_id = SST_ID, + .model_id = SST_SST49LF004A, + .total_size = 512, + .page_size = 64 * 1024, + .feature_bits = FEATURE_REGISTERMAP | FEATURE_EITHER_RESET, + .tested = TEST_OK_PREW, + .probe = probe_jedec, + .probe_timing = 1, /* 150 ns */ + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 128} }, + .block_erase = erase_sector_jedec, + }, { + .eraseblocks = { {64 * 1024, 8} }, + .block_erase = erase_block_jedec, + }, { + .eraseblocks = { {512 * 1024, 1} }, + .block_erase = NULL, /* AA 55 80 AA 55 10, only in A/A mux mode */ + }, + }, + .printlock = printlock_sst_fwhub, + .unlock = unlock_sst_fwhub, + .write = write_jedec_1, + .read = read_memmapped, + .voltage = {3000, 3600}, + }, + + { + .vendor = "SST", + .name = "SST49LF004C", + .bustype = BUS_FWH, + .manufacture_id = SST_ID, + .model_id = SST_SST49LF004C, + .total_size = 512, + .page_size = 4 * 1024, + .feature_bits = FEATURE_REGISTERMAP, + .tested = TEST_UNTESTED, + .probe = probe_82802ab, + .probe_timing = TIMING_IGNORED, /* routine doesn't use probe_timing (sst49lfxxxc.c) */ + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 128} }, + .block_erase = erase_sector_49lfxxxc, + }, { + .eraseblocks = { + {64 * 1024, 7}, + {32 * 1024, 1}, + {8 * 1024, 2}, + {16 * 1024, 1}, + }, + .block_erase = erase_block_82802ab, + } + }, + .unlock = unlock_49lfxxxc, + .write = write_82802ab, + .read = read_memmapped, + .voltage = {3000, 3600}, + }, + + { + .vendor = "SST", + .name = "SST49LF008A", + .bustype = BUS_FWH, /* A/A Mux */ + .manufacture_id = SST_ID, + .model_id = SST_SST49LF008A, + .total_size = 1024, + .page_size = 64 * 1024, + .feature_bits = FEATURE_REGISTERMAP | FEATURE_EITHER_RESET, + .tested = TEST_OK_PREW, + .probe = probe_jedec, + .probe_timing = 1, /* 150 ns */ + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 256} }, + .block_erase = erase_sector_jedec, + }, { + .eraseblocks = { {64 * 1024, 16} }, + .block_erase = erase_block_jedec, + }, { + .eraseblocks = { {1024 * 1024, 1} }, + .block_erase = NULL, /* AA 55 80 AA 55 10, only in A/A mux mode */ + } + }, + .printlock = printlock_sst_fwhub, + .unlock = unlock_sst_fwhub, + .write = write_jedec_1, + .read = read_memmapped, + .voltage = {3000, 3600}, + }, + + { + .vendor = "SST", + .name = "SST49LF008C", + .bustype = BUS_FWH, + .manufacture_id = SST_ID, + .model_id = SST_SST49LF008C, + .total_size = 1024, + .page_size = 4 * 1024, + .feature_bits = FEATURE_REGISTERMAP, + .tested = TEST_UNTESTED, + .probe = probe_82802ab, + .probe_timing = TIMING_IGNORED, /* routine doesn't use probe_timing (sst49lfxxxc.c) */ + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 256} }, + .block_erase = erase_sector_49lfxxxc, + }, { + .eraseblocks = { + {64 * 1024, 15}, + {32 * 1024, 1}, + {8 * 1024, 2}, + {16 * 1024, 1}, + }, + .block_erase = erase_block_82802ab, + } + }, + .unlock = unlock_49lfxxxc, + .write = write_82802ab, + .read = read_memmapped, + .voltage = {3000, 3600}, + }, + + { + .vendor = "SST", + .name = "SST49LF016C", + .bustype = BUS_FWH, + .manufacture_id = SST_ID, + .model_id = SST_SST49LF016C, + .total_size = 2048, + .page_size = 4 * 1024, + .feature_bits = FEATURE_REGISTERMAP, + .tested = TEST_OK_PREW, + .probe = probe_82802ab, + .probe_timing = TIMING_IGNORED, /* routine doesn't use probe_timing (sst49lfxxxc.c) */ + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 512} }, + .block_erase = erase_sector_49lfxxxc, + }, { + .eraseblocks = { + {64 * 1024, 31}, + {32 * 1024, 1}, + {8 * 1024, 2}, + {16 * 1024, 1}, + }, + .block_erase = erase_block_82802ab, + } + }, + .unlock = unlock_49lfxxxc, + .write = write_82802ab, + .read = read_memmapped, + .voltage = {3000, 3600}, + }, + + { + .vendor = "SST", + .name = "SST49LF020", + .bustype = BUS_LPC, + .manufacture_id = SST_ID, + .model_id = SST_SST49LF020, + .total_size = 256, + .page_size = 16 * 1024, + .feature_bits = FEATURE_EITHER_RESET, + .tested = TEST_OK_PREW, + .probe = probe_jedec, + .probe_timing = 1, /* 150 ns */ + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 64} }, + .block_erase = erase_sector_jedec, + }, { + .eraseblocks = { {16 * 1024, 16} }, + .block_erase = erase_block_jedec, + }, { + .eraseblocks = { {256 * 1024, 1} }, + .block_erase = NULL, + } + }, + .write = write_jedec_1, + .read = read_memmapped, + .voltage = {3000, 3600}, + }, + + { + .vendor = "SST", + .name = "SST49LF020A", + .bustype = BUS_LPC, + .manufacture_id = SST_ID, + .model_id = SST_SST49LF020A, + .total_size = 256, + .page_size = 4 * 1024, + .feature_bits = FEATURE_EITHER_RESET, + .tested = TEST_OK_PRE, + .probe = probe_jedec, + .probe_timing = 1, /* 150 ns */ + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 64} }, + .block_erase = erase_sector_jedec, + }, { + .eraseblocks = { {16 * 1024, 16} }, + .block_erase = erase_block_jedec, + }, { + .eraseblocks = { {256 * 1024, 1} }, + .block_erase = NULL, + } + }, + .write = write_jedec_1, + .read = read_memmapped, + .voltage = {3000, 3600}, + }, + + { + .vendor = "SST", + .name = "SST49LF040", + .bustype = BUS_LPC, + .manufacture_id = SST_ID, + .model_id = SST_SST49LF040, + .total_size = 512, + .page_size = 4096, + .feature_bits = FEATURE_EITHER_RESET, + .tested = TEST_OK_PREW, + .probe = probe_jedec, + .probe_timing = 1, /* 150 ns */ + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 128} }, + .block_erase = erase_sector_jedec, + }, { + .eraseblocks = { {64 * 1024, 8} }, + .block_erase = erase_block_jedec, + }, { + .eraseblocks = { {512 * 1024, 1} }, + .block_erase = NULL, + } + }, + .write = write_jedec_1, + .read = read_memmapped, + .voltage = {3000, 3600}, + }, + + { + .vendor = "SST", + .name = "SST49LF040B", + .bustype = BUS_LPC, /* A/A Mux */ + .manufacture_id = SST_ID, + .model_id = SST_SST49LF040B, + .total_size = 512, + .page_size = 64 * 1024, + .feature_bits = FEATURE_EITHER_RESET | FEATURE_REGISTERMAP, + .tested = TEST_OK_PREW, + .probe = probe_jedec, + .probe_timing = 1, /* 150ns */ + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 128} }, + .block_erase = erase_sector_jedec, + }, { + .eraseblocks = { {64 * 1024, 8} }, + .block_erase = erase_block_jedec, + }, { + .eraseblocks = { {512 * 1024, 1} }, + .block_erase = NULL, + } + }, + .unlock = unlock_82802ab, + .write = write_jedec_1, + .read = read_memmapped, + .voltage = {3000, 3600}, + }, + + { + .vendor = "SST", + .name = "SST49LF080A", + .bustype = BUS_LPC, /* A/A Mux */ + .manufacture_id = SST_ID, + .model_id = SST_SST49LF080A, + .total_size = 1024, + .page_size = 4096, + .feature_bits = FEATURE_EITHER_RESET, + .tested = TEST_OK_PREW, + .probe = probe_jedec, + .probe_timing = TIMING_FIXME, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 256} }, + .block_erase = erase_sector_jedec, + }, { + .eraseblocks = { {64 * 1024, 16} }, + .block_erase = erase_block_jedec, + }, { + .eraseblocks = { {1024 * 1024, 1} }, + .block_erase = NULL, + } + }, + .write = write_jedec_1, + .read = read_memmapped, + .voltage = {3000, 3600}, + }, + + { + .vendor = "SST", + .name = "SST49LF160C", + .bustype = BUS_LPC, + .manufacture_id = SST_ID, + .model_id = SST_SST49LF160C, + .total_size = 2048, + .page_size = 4 * 1024, + .feature_bits = FEATURE_REGISTERMAP, + .tested = TEST_OK_PRE, + .probe = probe_82802ab, + .probe_timing = TIMING_IGNORED, /* routine doesn't use probe_timing (sst49lfxxxc.c) */ + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 512} }, + .block_erase = erase_sector_49lfxxxc, + }, { + .eraseblocks = { + {64 * 1024, 31}, + {32 * 1024, 1}, + {8 * 1024, 2}, + {16 * 1024, 1}, + }, + .block_erase = erase_block_82802ab, + } + }, + .unlock = unlock_49lfxxxc, + .write = write_82802ab, + .read = read_memmapped, + .voltage = {3000, 3600}, + }, + + { + .vendor = "ST", + .name = "M29F002B", + .bustype = BUS_PARALLEL, + .manufacture_id = ST_ID, + .model_id = ST_M29F002B, + .total_size = 256, + .page_size = 64 * 1024, + .feature_bits = FEATURE_ADDR_AAA | FEATURE_EITHER_RESET, + .tested = TEST_UNTESTED, + .probe = probe_jedec, + .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ + .block_erasers = + { + { + .eraseblocks = { + {16 * 1024, 1}, + {8 * 1024, 2}, + {32 * 1024, 1}, + {64 * 1024, 3}, + }, + .block_erase = erase_sector_jedec, + }, { + .eraseblocks = { {256 * 1024, 1} }, + .block_erase = erase_chip_block_jedec, + } + }, + .write = write_jedec_1, + .read = read_memmapped, + .voltage = {4750, 5250}, /* 4.75-5.25V for type -X, others 4.5-5.5V */ + }, + + { + .vendor = "ST", + .name = "M29F002T/NT", + .bustype = BUS_PARALLEL, + .manufacture_id = ST_ID, + .model_id = ST_M29F002T, + .total_size = 256, + .page_size = 64 * 1024, + .feature_bits = FEATURE_ADDR_AAA | FEATURE_EITHER_RESET, + .tested = TEST_OK_PREW, + .probe = probe_jedec, + .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ + .block_erasers = + { + { + .eraseblocks = { + {64 * 1024, 3}, + {32 * 1024, 1}, + {8 * 1024, 2}, + {16 * 1024, 1}, + }, + .block_erase = erase_sector_jedec, + }, { + .eraseblocks = { {256 * 1024, 1} }, + .block_erase = erase_chip_block_jedec, + } + }, + .write = write_jedec_1, + .read = read_memmapped, + .voltage = {4750, 5250}, /* 4.75-5.25V for type -X, others 4.5-5.5V */ + }, + + { + .vendor = "ST", + .name = "M29F040B", + .bustype = BUS_PARALLEL, + .manufacture_id = ST_ID, + .model_id = ST_M29F040B, + .total_size = 512, + .page_size = 64 * 1024, + .feature_bits = FEATURE_ADDR_2AA | FEATURE_EITHER_RESET, + .tested = TEST_UNTESTED, + .probe = probe_jedec, + .probe_timing = TIMING_ZERO, /* datasheet specifies no timing */ + .block_erasers = + { + { + .eraseblocks = { {64 * 1024, 8}, }, + .block_erase = erase_sector_jedec, + }, { + .eraseblocks = { {512 * 1024, 1} }, + .block_erase = erase_chip_block_jedec, + } + }, + .write = write_jedec_1, + .read = read_memmapped, + .voltage = {4500, 5500}, + }, + + { + /* FIXME: this has WORD/BYTE sequences; 2AA for word, 555 for byte */ + .vendor = "ST", + .name = "M29F400BB", + .bustype = BUS_PARALLEL, + .manufacture_id = ST_ID, + .model_id = ST_M29F400BB, + .total_size = 512, + .page_size = 64 * 1024, + .feature_bits = FEATURE_ADDR_SHIFTED | FEATURE_EITHER_RESET, + .tested = TEST_UNTESTED, + .probe = probe_m29f400bt, + .probe_timing = TIMING_IGNORED, /* routine doesn't use probe_timing (m29f400bt.c) */ + .block_erasers = + { + { + .eraseblocks = { + {16 * 1024, 1}, + {8 * 1024, 2}, + {32 * 1024, 1}, + {64 * 1024, 7}, + }, + .block_erase = erase_block_shifted_jedec, + }, { + .eraseblocks = { {512 * 1024, 1} }, + .block_erase = erase_chip_block_shifted_jedec, + } + }, + .write = write_m29f400bt, + .read = read_memmapped, + .voltage = {4500, 5500}, + }, + { + /* FIXME: this has WORD/BYTE sequences; 2AA for word, 555 for byte */ + .vendor = "ST", + .name = "M29F400BT", + .bustype = BUS_PARALLEL, + .manufacture_id = ST_ID, + .model_id = ST_M29F400BT, + .total_size = 512, + .page_size = 64 * 1024, + .feature_bits = FEATURE_ADDR_SHIFTED | FEATURE_EITHER_RESET, + .tested = TEST_UNTESTED, + .probe = probe_m29f400bt, + .probe_timing = TIMING_IGNORED, /* routine doesn't use probe_timing (m29f400bt.c) */ + .block_erasers = + { + { + .eraseblocks = { + {64 * 1024, 7}, + {32 * 1024, 1}, + {8 * 1024, 2}, + {16 * 1024, 1}, + }, + .block_erase = erase_block_shifted_jedec, + }, { + .eraseblocks = { {512 * 1024, 1} }, + .block_erase = erase_chip_block_shifted_jedec, + } + }, + .write = write_m29f400bt, + .read = read_memmapped, + .voltage = {4500, 5500}, + }, + + { + .vendor = "ST", + .name = "M29W010B", + .bustype = BUS_PARALLEL, + .manufacture_id = ST_ID, + .model_id = ST_M29W010B, + .total_size = 128, + .page_size = 16 * 1024, + .feature_bits = FEATURE_ADDR_2AA | FEATURE_EITHER_RESET, + .tested = TEST_UNTESTED, + .probe = probe_jedec, + .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ + .block_erasers = + { + { + .eraseblocks = { {16 * 1024, 8}, }, + .block_erase = erase_sector_jedec, + }, { + .eraseblocks = { {128 * 1024, 1} }, + .block_erase = erase_chip_block_jedec, + } + }, + .write = write_jedec_1, + .read = read_memmapped, + .voltage = {2700, 3600}, + }, + + { + .vendor = "ST", + .name = "M29W040B", + .bustype = BUS_PARALLEL, + .manufacture_id = ST_ID, + .model_id = ST_M29W040B, + .total_size = 512, + .page_size = 64 * 1024, + .feature_bits = FEATURE_ADDR_2AA | FEATURE_EITHER_RESET, + .tested = TEST_UNTESTED, + .probe = probe_jedec, + .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ + .block_erasers = + { + { + .eraseblocks = { {64 * 1024, 8}, }, + .block_erase = erase_sector_jedec, + }, { + .eraseblocks = { {512 * 1024, 1} }, + .block_erase = erase_chip_block_jedec, + } + }, + .write = write_jedec_1, + .read = read_memmapped, + .voltage = {2700, 3600}, + }, + + { + .vendor = "ST", + .name = "M29W512B", + .bustype = BUS_PARALLEL, + .manufacture_id = ST_ID, + .model_id = ST_M29W512B, + .total_size = 64, + .page_size = 64 * 1024, + .feature_bits = FEATURE_ADDR_2AA | FEATURE_EITHER_RESET, + .tested = TEST_OK_PREW, + .probe = probe_jedec, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {64 * 1024, 1} }, + .block_erase = erase_chip_block_jedec, + } + }, + .write = write_jedec_1, + .read = read_memmapped, + .voltage = {2700, 3600}, + }, + + { + .vendor = "ST", + .name = "M50FLW040A", + .bustype = BUS_FWH | BUS_LPC, /* A/A Mux */ + .manufacture_id = ST_ID, + .model_id = ST_M50FLW040A, + .total_size = 512, + .page_size = 0, + .feature_bits = FEATURE_REGISTERMAP, + .tested = TEST_UNTESTED, + .probe = probe_82802ab, + .probe_timing = TIMING_FIXME, + .block_erasers = + { + { + .eraseblocks = { + {4 * 1024, 16}, /* sector */ + {64 * 1024, 5}, /* block */ + {4 * 1024, 16}, /* sector */ + {4 * 1024, 16}, /* sector */ + }, + .block_erase = erase_sector_stm50, + }, { + .eraseblocks = { {64 * 1024, 8}, }, + .block_erase = erase_block_82802ab, + } + }, + .write = write_82802ab, + .unlock = unlock_stm50_uniform, + .read = read_memmapped, + .voltage = {3000, 3600}, /* Also has 12V fast program & erase */ + }, + + { + .vendor = "ST", + .name = "M50FLW040B", + .bustype = BUS_FWH | BUS_LPC, /* A/A Mux */ + .manufacture_id = ST_ID, + .model_id = ST_M50FLW040B, + .total_size = 512, + .page_size = 0, + .feature_bits = FEATURE_REGISTERMAP, + .tested = TEST_UNTESTED, + .probe = probe_82802ab, + .probe_timing = TIMING_FIXME, + .block_erasers = + { + { + .eraseblocks = { + {4 * 1024, 16}, /* sector */ + {4 * 1024, 16}, /* sector */ + {64 * 1024, 5}, /* block */ + {4 * 1024, 16}, /* sector */ + }, + .block_erase = erase_sector_stm50, + }, { + .eraseblocks = { {64 * 1024, 8}, }, + .block_erase = erase_block_82802ab, + } + }, + .write = write_82802ab, + .unlock = unlock_stm50_uniform, + .read = read_memmapped, + .voltage = {3000, 3600}, /* Also has 12V fast program & erase */ + }, + + { + .vendor = "ST", + .name = "M50FLW080A", + .bustype = BUS_FWH | BUS_LPC, /* A/A Mux */ + .manufacture_id = ST_ID, + .model_id = ST_M50FLW080A, + .total_size = 1024, + .page_size = 0, + .feature_bits = FEATURE_REGISTERMAP, + .tested = TEST_OK_PRE, + .probe = probe_82802ab, + .probe_timing = TIMING_FIXME, + .block_erasers = + { + { + .eraseblocks = { + {4 * 1024, 16}, /* sector */ + {64 * 1024, 13}, /* block */ + {4 * 1024, 16}, /* sector */ + {4 * 1024, 16}, /* sector */ + }, + .block_erase = erase_sector_stm50, + }, { + .eraseblocks = { {64 * 1024, 16}, }, + .block_erase = erase_block_82802ab, + } + }, + .unlock = unlock_stm50_nonuniform, + .write = write_82802ab, + .read = read_memmapped, + .voltage = {3000, 3600}, /* Also has 12V fast program & erase */ + }, + + { + .vendor = "ST", + .name = "M50FLW080B", + .bustype = BUS_FWH | BUS_LPC, /* A/A Mux */ + .manufacture_id = ST_ID, + .model_id = ST_M50FLW080B, + .total_size = 1024, + .page_size = 0, + .feature_bits = FEATURE_REGISTERMAP, + .tested = TEST_UNTESTED, + .probe = probe_82802ab, + .probe_timing = TIMING_FIXME, + .block_erasers = + { + { + .eraseblocks = { + {4 * 1024, 16}, /* sector */ + {4 * 1024, 16}, /* sector */ + {64 * 1024, 13}, /* block */ + {4 * 1024, 16}, /* sector */ + }, + .block_erase = erase_sector_stm50, + }, { + .eraseblocks = { {64 * 1024, 16}, }, + .block_erase = erase_block_82802ab, + } + }, + .unlock = unlock_stm50_nonuniform, + .write = write_82802ab, + .read = read_memmapped, + .voltage = {3000, 3600}, /* Also has 12V fast program & erase */ + }, + + { + .vendor = "ST", + .name = "M50FW002", + .bustype = BUS_FWH, /* A/A Mux */ + .manufacture_id = ST_ID, + .model_id = ST_M50FW002, + .total_size = 256, + .page_size = 0, + .feature_bits = FEATURE_REGISTERMAP, + .tested = TEST_UNTESTED, + .probe = probe_82802ab, + .probe_timing = TIMING_IGNORED, /* routine doesn't use probe_timing (sst49lfxxxc.c) */ + .block_erasers = + { + { + .eraseblocks = { + {64 * 1024, 3}, + {32 * 1024, 1}, + {8 * 1024, 2}, + {16 * 1024, 1}, + }, + .block_erase = erase_block_82802ab, + } + }, + .unlock = unlock_stm50_nonuniform, + .write = write_82802ab, + .read = read_memmapped, + .voltage = {3000, 3600}, /* Also has 12V fast program & erase */ + }, + + { + .vendor = "ST", + .name = "M50FW016", + .bustype = BUS_FWH, /* A/A Mux */ + .manufacture_id = ST_ID, + .model_id = ST_M50FW016, + .total_size = 2048, + .page_size = 0, + .feature_bits = FEATURE_REGISTERMAP, + .tested = TEST_UNTESTED, + .probe = probe_82802ab, + .probe_timing = TIMING_IGNORED, /* routine doesn't use probe_timing (82802ab.c) */ + .block_erasers = + { + { + .eraseblocks = { {64 * 1024, 32}, }, + .block_erase = erase_block_82802ab, + } + }, + .unlock = unlock_stm50_uniform, + .write = write_82802ab, + .read = read_memmapped, + .voltage = {3000, 3600}, /* Also has 12V fast program & erase */ + }, + + { + .vendor = "ST", + .name = "M50FW040", + .bustype = BUS_FWH, /* A/A Mux */ + .manufacture_id = ST_ID, + .model_id = ST_M50FW040, + .total_size = 512, + .page_size = 0, + .feature_bits = FEATURE_REGISTERMAP, + .tested = TEST_OK_PR, + .probe = probe_82802ab, + .probe_timing = TIMING_IGNORED, /* routine doesn't use probe_timing (82802ab.c) */ + .block_erasers = + { + { + .eraseblocks = { {64 * 1024, 8}, }, + .block_erase = erase_block_82802ab, + } + }, + .unlock = unlock_stm50_uniform, + .write = write_82802ab, + .read = read_memmapped, + .voltage = {3000, 3600}, /* Also has 12V fast program & erase */ + }, + + { + .vendor = "ST", + .name = "M50FW080", + .bustype = BUS_FWH, /* A/A Mux */ + .manufacture_id = ST_ID, + .model_id = ST_M50FW080, + .total_size = 1024, + .page_size = 0, + .feature_bits = FEATURE_REGISTERMAP, + .tested = TEST_OK_PREW, + .probe = probe_82802ab, + .probe_timing = TIMING_IGNORED, /* routine doesn't use probe_timing (82802ab.c) */ + .block_erasers = + { + { + .eraseblocks = { {64 * 1024, 16}, }, + .block_erase = erase_block_82802ab, + } + }, + .unlock = unlock_stm50_uniform, + .write = write_82802ab, + .read = read_memmapped, + .voltage = {3000, 3600}, /* Also has 12V fast program & erase */ + }, + + { + .vendor = "ST", + .name = "M50LPW080", + .bustype = BUS_LPC, /* A/A Mux */ + .manufacture_id = ST_ID, + .model_id = ST_M50LPW080, + .total_size = 1024, + .page_size = 0, + .feature_bits = FEATURE_REGISTERMAP, + .tested = TEST_UNTESTED, + .probe = probe_82802ab, + .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ + .block_erasers = + { + { + .eraseblocks = { {64 * 1024, 16}, }, + .block_erase = erase_block_82802ab, + } + }, + .unlock = unlock_stm50_uniform, + .write = write_82802ab, + .read = read_memmapped, + .voltage = {3000, 3600}, /* Also has 12V fast program & erase */ + }, + + { + .vendor = "ST", + .name = "M50LPW116", + .bustype = BUS_LPC, /* A/A Mux */ + .manufacture_id = ST_ID, + .model_id = ST_M50LPW116, + .total_size = 2048, + .page_size = 0, + .feature_bits = FEATURE_REGISTERMAP, + .tested = TEST_UNTESTED, + .probe = probe_82802ab, + .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ + .block_erasers = + { + { + .eraseblocks = { + {4 * 1024, 16}, + {64 * 1024, 30}, + {32 * 1024, 1}, + {8 * 1024, 2}, + {16 * 1024, 1}, + }, + .block_erase = erase_block_82802ab, + } + }, + .unlock = unlock_stm50_nonuniform, + .write = write_82802ab, + .read = read_memmapped, + .voltage = {3000, 3600}, /* Also has 12V fast program & erase */ + }, + + { + .vendor = "SyncMOS/MoselVitelic", + .name = "{F,S,V}29C51001B", + .bustype = BUS_PARALLEL, + .manufacture_id = SYNCMOS_MVC_ID, + .model_id = SM_MVC_29C51001B, + .total_size = 128, + .page_size = 512, + .feature_bits = FEATURE_EITHER_RESET, + .tested = TEST_UNTESTED, + .probe = probe_jedec, + .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ + .block_erasers = + { + { + .eraseblocks = { {512, 256} }, + .block_erase = erase_sector_jedec, + }, { + .eraseblocks = { {128 * 1024, 1} }, + .block_erase = erase_chip_block_jedec, + }, + }, + .write = write_jedec_1, + .read = read_memmapped, + .voltage = {4500, 5500}, + }, + + { + .vendor = "SyncMOS/MoselVitelic", + .name = "{F,S,V}29C51001T", + .bustype = BUS_PARALLEL, + .manufacture_id = SYNCMOS_MVC_ID, + .model_id = SM_MVC_29C51001T, + .total_size = 128, + .page_size = 512, + .feature_bits = FEATURE_EITHER_RESET, + .tested = TEST_UNTESTED, + .probe = probe_jedec, + .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ + .block_erasers = + { + { + .eraseblocks = { {512, 256} }, + .block_erase = erase_sector_jedec, + }, { + .eraseblocks = { {128 * 1024, 1} }, + .block_erase = erase_chip_block_jedec, + }, + }, + .write = write_jedec_1, + .read = read_memmapped, + .voltage = {4500, 5500}, + }, + + { + .vendor = "SyncMOS/MoselVitelic", + .name = "{F,S,V}29C51002B", + .bustype = BUS_PARALLEL, + .manufacture_id = SYNCMOS_MVC_ID, + .model_id = SM_MVC_29C51002B, + .total_size = 256, + .page_size = 512, + .feature_bits = FEATURE_EITHER_RESET, + .tested = TEST_UNTESTED, + .probe = probe_jedec, + .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ + .block_erasers = + { + { + .eraseblocks = { {512, 512} }, + .block_erase = erase_sector_jedec, + }, { + .eraseblocks = { {256 * 1024, 1} }, + .block_erase = erase_chip_block_jedec, + }, + }, + .write = write_jedec_1, + .read = read_memmapped, + }, + + { + .vendor = "SyncMOS/MoselVitelic", + .name = "{F,S,V}29C51002T", + .bustype = BUS_PARALLEL, + .manufacture_id = SYNCMOS_MVC_ID, + .model_id = SM_MVC_29C51002T, + .total_size = 256, + .page_size = 512, + .feature_bits = FEATURE_EITHER_RESET, + .tested = TEST_OK_PREW, + .probe = probe_jedec, + .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ + .block_erasers = + { + { + .eraseblocks = { {512, 512} }, + .block_erase = erase_sector_jedec, + }, { + .eraseblocks = { {256 * 1024, 1} }, + .block_erase = erase_chip_block_jedec, + }, + }, + .write = write_jedec_1, + .read = read_memmapped, + }, + + { + .vendor = "SyncMOS/MoselVitelic", + .name = "{F,S,V}29C51004B", + .bustype = BUS_PARALLEL, + .manufacture_id = SYNCMOS_MVC_ID, + .model_id = SM_MVC_29C51004B, + .total_size = 512, + .page_size = 1024, + .feature_bits = FEATURE_EITHER_RESET, + .tested = TEST_UNTESTED, + .probe = probe_jedec, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {1024, 512} }, + .block_erase = erase_sector_jedec, + }, { + .eraseblocks = { {512 * 1024, 1} }, + .block_erase = erase_chip_block_jedec, + }, + }, + .write = write_jedec_1, + .read = read_memmapped, + .voltage = {4500, 5500}, + }, + + { + .vendor = "SyncMOS/MoselVitelic", + .name = "{F,S,V}29C51004T", + .bustype = BUS_PARALLEL, + .manufacture_id = SYNCMOS_MVC_ID, + .model_id = SM_MVC_29C51004T, + .total_size = 512, + .page_size = 1024, + .feature_bits = FEATURE_EITHER_RESET, + .tested = TEST_UNTESTED, + .probe = probe_jedec, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {1024, 512} }, + .block_erase = erase_sector_jedec, + }, { + .eraseblocks = { {512 * 1024, 1} }, + .block_erase = erase_chip_block_jedec, + }, + }, + .write = write_jedec_1, + .read = read_memmapped, + .voltage = {4500, 5500}, + }, + + { + .vendor = "SyncMOS/MoselVitelic", + .name = "{S,V}29C31004B", + .bustype = BUS_PARALLEL, + .manufacture_id = SYNCMOS_MVC_ID, + .model_id = SM_MVC_29C31004B, + .total_size = 512, + .page_size = 1024, + .feature_bits = FEATURE_EITHER_RESET, + .tested = TEST_UNTESTED, + .probe = probe_jedec, + .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ + .block_erasers = + { + { + .eraseblocks = { {1024, 512} }, + .block_erase = erase_sector_jedec, + }, { + .eraseblocks = { {512 * 1024, 1} }, + .block_erase = erase_chip_block_jedec, + }, + }, + .write = write_jedec_1, + .read = read_memmapped, + .voltage = {3000, 3600}, + }, + + { + .vendor = "SyncMOS/MoselVitelic", + .name = "{S,V}29C31004T", + .bustype = BUS_PARALLEL, + .manufacture_id = SYNCMOS_MVC_ID, + .model_id = SM_MVC_29C31004T, + .total_size = 512, + .page_size = 1024, + .feature_bits = FEATURE_EITHER_RESET, + .tested = TEST_UNTESTED, + .probe = probe_jedec, + .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ + .block_erasers = + { + { + .eraseblocks = { {1024, 512} }, + .block_erase = erase_sector_jedec, + }, { + .eraseblocks = { {512 * 1024, 1} }, + .block_erase = erase_chip_block_jedec, + }, + }, + .write = write_jedec_1, + .read = read_memmapped, + .voltage = {3000, 3600}, + }, + + { + .vendor = "TI", + .name = "TMS29F002RB", + .bustype = BUS_PARALLEL, + .manufacture_id = TI_OLD_ID, + .model_id = TI_TMS29F002RB, + .total_size = 256, + .page_size = 16384, /* Non-uniform sectors */ + .feature_bits = FEATURE_ADDR_2AA | FEATURE_EITHER_RESET, + .tested = TEST_UNTESTED, + .probe = probe_jedec, + .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ + .block_erasers = + { + { + .eraseblocks = { + {16 * 1024, 1}, + {8 * 1024, 2}, + {32 * 1024, 1}, + {64 * 1024, 3}, + }, + .block_erase = erase_sector_jedec, + }, { + .eraseblocks = { {256 * 1024, 1} }, + .block_erase = erase_chip_block_jedec, + }, + }, + .write = write_jedec_1, + .read = read_memmapped, + .voltage = {4500, 5500}, + }, + + { + .vendor = "TI", + .name = "TMS29F002RT", + .bustype = BUS_PARALLEL, + .manufacture_id = TI_OLD_ID, + .model_id = TI_TMS29F002RT, + .total_size = 256, + .page_size = 16384, /* Non-uniform sectors */ + .feature_bits = FEATURE_ADDR_2AA | FEATURE_EITHER_RESET, + .tested = TEST_UNTESTED, + .probe = probe_jedec, + .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ + .block_erasers = + { + { + .eraseblocks = { + {64 * 1024, 3}, + {32 * 1024, 1}, + {8 * 1024, 2}, + {16 * 1024, 1}, + }, + .block_erase = erase_sector_jedec, + }, { + .eraseblocks = { {256 * 1024, 1} }, + .block_erase = erase_chip_block_jedec, + }, + }, + .write = write_jedec_1, + .read = read_memmapped, + .voltage = {4500, 5500}, + }, + + { + .vendor = "Winbond", + .name = "W25Q80.V", + .bustype = BUS_SPI, + .manufacture_id = WINBOND_NEX_ID, + .model_id = WINBOND_NEX_W25Q80_V, + .total_size = 1024, + .page_size = 256, + /* supports SFDP */ + /* OTP: 1024B total, 256B reserved; read 0x48; write 0x42, erase 0x44, read ID 0x4B */ + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, + .tested = TEST_OK_PREW, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 256} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {32 * 1024, 32} }, + .block_erase = spi_block_erase_52, + }, { + .eraseblocks = { {64 * 1024, 16} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {1024 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {1024 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_256, + .read = spi_chip_read, + .voltage = {2700, 3600}, + }, + + { + .vendor = "Winbond", + .name = "W25Q16.V", + .bustype = BUS_SPI, + .manufacture_id = WINBOND_NEX_ID, + .model_id = WINBOND_NEX_W25Q16_V, + .total_size = 2048, + .page_size = 256, + /* supports SFDP */ + /* OTP: 1024B total, 256B reserved; read 0x48; write 0x42, erase 0x44, read ID 0x4B */ + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, + .tested = TEST_OK_PREW, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 512} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {32 * 1024, 64} }, + .block_erase = spi_block_erase_52, + }, { + .eraseblocks = { {64 * 1024, 32} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {2 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {2 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_256, + .read = spi_chip_read, + .voltage = {2700, 3600}, + }, + + { + .vendor = "Winbond", + .name = "W25Q32.V", + .bustype = BUS_SPI, + .manufacture_id = WINBOND_NEX_ID, + .model_id = WINBOND_NEX_W25Q32_V, + .total_size = 4096, + .page_size = 256, + /* supports SFDP */ + /* OTP: 1024B total, 256B reserved; read 0x48; write 0x42, erase 0x44, read ID 0x4B */ + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, + .tested = TEST_OK_PREW, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 1024} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {32 * 1024, 128} }, + .block_erase = spi_block_erase_52, + }, { + .eraseblocks = { {64 * 1024, 64} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {4 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {4 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_256, + .read = spi_chip_read, + .voltage = {2700, 3600}, + }, + + { + .vendor = "Winbond", + .name = "W25Q64.V", + .bustype = BUS_SPI, + .manufacture_id = WINBOND_NEX_ID, + .model_id = WINBOND_NEX_W25Q64_V, + .total_size = 8192, + .page_size = 256, + /* supports SFDP */ + /* OTP: 1024B total, 256B reserved; read 0x48; write 0x42, erase 0x44, read ID 0x4B */ + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, + .tested = TEST_OK_PREW, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 2048} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {32 * 1024, 256} }, + .block_erase = spi_block_erase_52, + }, { + .eraseblocks = { {64 * 1024, 128} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {8 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {8 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_256, + .read = spi_chip_read, + .voltage = {2700, 3600}, + }, + + { + .vendor = "Winbond", + .name = "W25Q128.V", + .bustype = BUS_SPI, + .manufacture_id = WINBOND_NEX_ID, + .model_id = WINBOND_NEX_W25Q128_V, + .total_size = 16384, + .page_size = 256, + /* supports SFDP */ + /* OTP: 1024B total, 256B reserved; read 0x48; write 0x42, erase 0x44, read ID 0x4B */ + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, + .tested = TEST_OK_PREW, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 4096} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {32 * 1024, 512} }, + .block_erase = spi_block_erase_52, + }, { + .eraseblocks = { {64 * 1024, 256} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {16 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {16 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_256, + .read = spi_chip_read, + .voltage = {2700, 3600}, + }, + + { + .vendor = "Winbond", + .name = "W25Q20.W", + .bustype = BUS_SPI, + .manufacture_id = WINBOND_NEX_ID, + .model_id = WINBOND_NEX_W25Q20_W, + .total_size = 256, + .page_size = 256, + /* OTP: 256B total; read 0x48; write 0x42, erase 0x44, read ID 0x4B */ + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 64} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {32 * 1024, 8} }, + .block_erase = spi_block_erase_52, + }, { + .eraseblocks = { {64 * 1024, 4} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {256 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {256 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_256, + .read = spi_chip_read, + .voltage = {1700, 1950}, /* Fast read (0x0B) and multi I/O supported */ + }, + + { + .vendor = "Winbond", + .name = "W25Q40.W", + .bustype = BUS_SPI, + .manufacture_id = WINBOND_NEX_ID, + .model_id = WINBOND_NEX_W25Q40_W, + .total_size = 512, + .page_size = 256, + /* OTP: 256B total; read 0x48; write 0x42, erase 0x44, read ID 0x4B */ + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 128} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {32 * 1024, 16} }, + .block_erase = spi_block_erase_52, + }, { + .eraseblocks = { {64 * 1024, 8} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {512 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {512 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_256, + .read = spi_chip_read, + .voltage = {1700, 1950}, /* Fast read (0x0B) and multi I/O supported */ + }, + + { + .vendor = "Winbond", + .name = "W25Q80.W", + .bustype = BUS_SPI, + .manufacture_id = WINBOND_NEX_ID, + .model_id = WINBOND_NEX_W25Q80_W, + .total_size = 1024, + .page_size = 256, + /* OTP: 256B total; read 0x48; write 0x42, erase 0x44, read ID 0x4B */ + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 256} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {32 * 1024, 32} }, + .block_erase = spi_block_erase_52, + }, { + .eraseblocks = { {64 * 1024, 16} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {1 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {1 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_256, + .read = spi_chip_read, + .voltage = {1700, 1950}, /* Fast read (0x0B) and multi I/O supported */ + }, + + { + .vendor = "Winbond", + .name = "W25Q16.W", + .bustype = BUS_SPI, + .manufacture_id = WINBOND_NEX_ID, + .model_id = WINBOND_NEX_W25Q16_W, + .total_size = 2048, + .page_size = 256, + /* OTP: 256B total; read 0x48; write 0x42, erase 0x44, read ID 0x4B */ + /* QPI enable 0x38, disable 0xFF */ + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_QPI, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 512} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {32 * 1024, 64} }, + .block_erase = spi_block_erase_52, + }, { + .eraseblocks = { {64 * 1024, 32} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {2 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {2 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_256, + .read = spi_chip_read, + .voltage = {1700, 1950}, /* Fast read (0x0B) and multi I/O supported */ + }, + + { + .vendor = "Winbond", + .name = "W25Q32.W", + .bustype = BUS_SPI, + .manufacture_id = WINBOND_NEX_ID, + .model_id = WINBOND_NEX_W25Q32_W, + .total_size = 4096, + .page_size = 256, + /* OTP: 256B total; read 0x48; write 0x42, erase 0x44, read ID 0x4B */ + /* QPI enable 0x38, disable 0xFF */ + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_QPI, + .tested = TEST_OK_PREW, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 1024} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {32 * 1024, 128} }, + .block_erase = spi_block_erase_52, + }, { + .eraseblocks = { {64 * 1024, 64} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {4 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {4 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_256, + .read = spi_chip_read, + .voltage = {1700, 1950}, /* Fast read (0x0B) and multi I/O supported */ + }, + + { + .vendor = "Winbond", + .name = "W25Q64.W", + .bustype = BUS_SPI, + .manufacture_id = WINBOND_NEX_ID, + .model_id = WINBOND_NEX_W25Q64_W, + .total_size = 8192, + .page_size = 256, + /* OTP: 256B total; read 0x48; write 0x42, erase 0x44, read ID 0x4B */ + /* QPI enable 0x38, disable 0xFF */ + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_QPI, + .tested = TEST_OK_PREW, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 2048} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {32 * 1024, 256} }, + .block_erase = spi_block_erase_52, + }, { + .eraseblocks = { {64 * 1024, 128} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {8 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {8 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_256, + .read = spi_chip_read, + .voltage = {1700, 1950}, /* Fast read (0x0B) and multi I/O supported */ + }, + + { + .vendor = "Winbond", + .name = "W25X10", + .bustype = BUS_SPI, + .manufacture_id = WINBOND_NEX_ID, + .model_id = WINBOND_NEX_W25X10, + .total_size = 128, + .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, + .tested = TEST_OK_PREW, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 32} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {64 * 1024, 2} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {128 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_256, + .read = spi_chip_read, + .voltage = {2700, 3600}, + }, + + { + .vendor = "Winbond", + .name = "W25X20", + .bustype = BUS_SPI, + .manufacture_id = WINBOND_NEX_ID, + .model_id = WINBOND_NEX_W25X20, + .total_size = 256, + .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, + .tested = TEST_OK_PREW, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 64} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {64 * 1024, 4} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {256 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_256, + .read = spi_chip_read, + .voltage = {2700, 3600}, + }, + + { + .vendor = "Winbond", + .name = "W25X40", + .bustype = BUS_SPI, + .manufacture_id = WINBOND_NEX_ID, + .model_id = WINBOND_NEX_W25X40, + .total_size = 512, + .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, + .tested = TEST_OK_PREW, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 128} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {64 * 1024, 8} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {512 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_256, + .read = spi_chip_read, + .voltage = {2700, 3600}, + }, + + { + .vendor = "Winbond", + .name = "W25X80", + .bustype = BUS_SPI, + .manufacture_id = WINBOND_NEX_ID, + .model_id = WINBOND_NEX_W25X80, + .total_size = 1024, + .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, + .tested = TEST_OK_PREW, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 256} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {64 * 1024, 16} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {1024 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_256, + .read = spi_chip_read, + .voltage = {2700, 3600}, + }, + + { + .vendor = "Winbond", + .name = "W25X16", + .bustype = BUS_SPI, + .manufacture_id = WINBOND_NEX_ID, + .model_id = WINBOND_NEX_W25X16, + .total_size = 2048, + .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, + .tested = TEST_OK_PREW, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 512} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {32 * 1024, 64} }, + .block_erase = spi_block_erase_52, + }, { + .eraseblocks = { {64 * 1024, 32} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {2 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {2 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_256, + .read = spi_chip_read, + .voltage = {2700, 3600}, + }, + + { + .vendor = "Winbond", + .name = "W25X32", + .bustype = BUS_SPI, + .manufacture_id = WINBOND_NEX_ID, + .model_id = WINBOND_NEX_W25X32, + .total_size = 4096, + .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, + .tested = TEST_OK_PREW, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 1024} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {32 * 1024, 128} }, + .block_erase = spi_block_erase_52, + }, { + .eraseblocks = { {64 * 1024, 64} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {4 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {4 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_256, + .read = spi_chip_read, + .voltage = {2700, 3600}, + }, + + { + .vendor = "Winbond", + .name = "W25X64", + .bustype = BUS_SPI, + .manufacture_id = WINBOND_NEX_ID, + .model_id = WINBOND_NEX_W25X64, + .total_size = 8192, + .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, + .tested = TEST_OK_PROBE, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 2048} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {32 * 1024, 256} }, + .block_erase = spi_block_erase_52, + }, { + .eraseblocks = { {64 * 1024, 128} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {8 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {8 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_256, + .read = spi_chip_read, + .voltage = {2700, 3600}, + }, + + { + .vendor = "Winbond", + .name = "W29C010(M)/W29C011A/W29EE011/W29EE012-old", + .bustype = BUS_PARALLEL, + .manufacture_id = WINBOND_ID, + .model_id = WINBOND_W29C010, + .total_size = 128, + .page_size = 128, + .feature_bits = FEATURE_LONG_RESET, + .tested = TEST_OK_PREW, + .probe = probe_w29ee011, + .probe_timing = TIMING_IGNORED, /* routine doesn't use probe_timing (w29ee011.c) */ + .block_erasers = + { + { + .eraseblocks = { {128 * 1024, 1} }, + .block_erase = erase_chip_block_jedec, + } + }, + .write = write_jedec, + .read = read_memmapped, + }, + + {/* W29EE011, W29EE012, W29C010M, W29C011A do not support probe_jedec according to the datasheet, but it works for newer(?) steppings. */ + .vendor = "Winbond", + .name = "W29C010(M)/W29C011A/W29EE011/W29EE012", + .bustype = BUS_PARALLEL, + .manufacture_id = WINBOND_ID, + .model_id = WINBOND_W29C010, + .total_size = 128, + .page_size = 128, + .feature_bits = FEATURE_LONG_RESET, + .tested = TEST_OK_PREW, + .probe = probe_jedec, + .probe_timing = 10, /* used datasheet for the W29C011A */ + .block_erasers = + { + { + .eraseblocks = { {128 * 1024, 1} }, + .block_erase = erase_chip_block_jedec, + } + }, + .write = write_jedec, + .read = read_memmapped, + }, + + { + .vendor = "Winbond", + .name = "W29C020(C)/W29C022", + .bustype = BUS_PARALLEL, + .manufacture_id = WINBOND_ID, + .model_id = WINBOND_W29C020, + .total_size = 256, + .page_size = 128, + .feature_bits = FEATURE_LONG_RESET, + .tested = TEST_OK_PREW, + .probe = probe_jedec, + .probe_timing = 10, + .block_erasers = + { + { + .eraseblocks = { {256 * 1024, 1} }, + .block_erase = erase_chip_block_jedec, + } + }, + .write = write_jedec, + .read = read_memmapped, + .voltage = {4500, 5500}, + }, + + { + .vendor = "Winbond", + .name = "W29C040/P", + .bustype = BUS_PARALLEL, + .manufacture_id = WINBOND_ID, + .model_id = WINBOND_W29C040, + .total_size = 512, + .page_size = 256, + .feature_bits = FEATURE_LONG_RESET, + .tested = TEST_UNTESTED, + .probe = probe_jedec, + .probe_timing = 10, + .block_erasers = + { + { + .eraseblocks = { {512 * 1024, 1} }, + .block_erase = erase_chip_block_jedec, + } + }, + .write = write_jedec, + .read = read_memmapped, + .voltage = {4500, 5500}, + }, + + { + .vendor = "Winbond", + .name = "W39F010", + .bustype = BUS_PARALLEL, + .manufacture_id = WINBOND_ID, + .model_id = WINBOND_W39F010, + .total_size = 128, + .page_size = 4 * 1024, + .feature_bits = FEATURE_EITHER_RESET, + .tested = TEST_OK_PREW, + .probe = probe_jedec, + .probe_timing = 10, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 32} }, + .block_erase = erase_block_jedec, + }, { + .eraseblocks = { {128 * 1024, 1} }, + .block_erase = erase_chip_block_jedec, + } + }, + .printlock = printlock_w39f010, + .write = write_jedec_1, + .read = read_memmapped, + .voltage = {4500, 5500}, + }, + + { + .vendor = "Winbond", + .name = "W39L010", + .bustype = BUS_PARALLEL, + .manufacture_id = WINBOND_ID, + .model_id = WINBOND_W39L010, + .total_size = 128, + .page_size = 4 * 1024, + .feature_bits = FEATURE_EITHER_RESET, + .tested = TEST_UNTESTED, + .probe = probe_jedec, + .probe_timing = 10, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 32} }, + .block_erase = erase_block_jedec, + }, { + .eraseblocks = { {128 * 1024, 1} }, + .block_erase = erase_chip_block_jedec, + } + }, + .printlock = printlock_w39l010, + .write = write_jedec_1, + .read = read_memmapped, + .voltage = {3000, 3600}, + }, + + { + .vendor = "Winbond", + .name = "W39L020", + .bustype = BUS_PARALLEL, + .manufacture_id = WINBOND_ID, + .model_id = WINBOND_W39L020, + .total_size = 256, + .page_size = 4 * 1024, + .feature_bits = FEATURE_EITHER_RESET, + .tested = TEST_UNTESTED, + .probe = probe_jedec, + .probe_timing = 10, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 64} }, + .block_erase = erase_block_jedec, + }, { + .eraseblocks = { {64 * 1024, 4} }, + .block_erase = erase_sector_jedec, + }, { + .eraseblocks = { {256 * 1024, 1} }, + .block_erase = erase_chip_block_jedec, + } + }, + .printlock = printlock_w39l020, + .write = write_jedec_1, + .read = read_memmapped, + .voltage = {3000, 3600}, + }, + + { + .vendor = "Winbond", + .name = "W39L040", + .bustype = BUS_PARALLEL, + .manufacture_id = WINBOND_ID, + .model_id = WINBOND_W39L040, + .total_size = 512, + .page_size = 64 * 1024, + .feature_bits = FEATURE_EITHER_RESET, + .tested = TEST_OK_PR, + .probe = probe_jedec, + .probe_timing = 10, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 128} }, + .block_erase = erase_block_jedec, + }, { + .eraseblocks = { {64 * 1024, 8} }, + .block_erase = erase_sector_jedec, + }, { + .eraseblocks = { {512 * 1024, 1} }, + .block_erase = erase_chip_block_jedec, + } + }, + .printlock = printlock_w39l040, + .write = write_jedec_1, + .read = read_memmapped, + .voltage = {3000, 3600}, + }, + + { + .vendor = "Winbond", + .name = "W39V040A", + .bustype = BUS_LPC, + .manufacture_id = WINBOND_ID, + .model_id = WINBOND_W39V040A, + .total_size = 512, + .page_size = 64 * 1024, + .feature_bits = FEATURE_EITHER_RESET, + .tested = TEST_OK_PREW, + .probe = probe_jedec, + .probe_timing = 10, + .block_erasers = + { + { + .eraseblocks = { {64 * 1024, 8} }, + .block_erase = erase_sector_jedec, + }, { + .eraseblocks = { {512 * 1024, 1} }, + .block_erase = erase_chip_block_jedec, + } + }, + .printlock = printlock_w39v040a, + .write = write_jedec_1, + .read = read_memmapped, + .voltage = {3000, 3600}, + }, + + { + .vendor = "Winbond", + .name = "W39V040B", + .bustype = BUS_LPC, + .manufacture_id = WINBOND_ID, + .model_id = WINBOND_W39V040B, + .total_size = 512, + .page_size = 64 * 1024, + .feature_bits = FEATURE_EITHER_RESET, + .tested = TEST_OK_PREW, + .probe = probe_jedec, + .probe_timing = 10, + .block_erasers = + { + { + .eraseblocks = { {64 * 1024, 8} }, + .block_erase = erase_sector_jedec, + }, { + .eraseblocks = { {512 * 1024, 1} }, + .block_erase = erase_chip_block_jedec, + } + }, + .printlock = printlock_w39v040b, + .write = write_jedec_1, + .read = read_memmapped, + .voltage = {3000, 3600}, + }, + + { + .vendor = "Winbond", + .name = "W39V040C", + .bustype = BUS_LPC, + .manufacture_id = WINBOND_ID, + .model_id = WINBOND_W39V040C, + .total_size = 512, + .page_size = 64 * 1024, + .feature_bits = FEATURE_EITHER_RESET, + .tested = TEST_OK_PREW, + .probe = probe_jedec, + .probe_timing = 10, + .block_erasers = + { + { + .eraseblocks = { {64 * 1024, 8} }, + .block_erase = erase_sector_jedec, + }, { + .eraseblocks = { {512 * 1024, 1} }, + .block_erase = erase_chip_block_jedec, + } + }, + .printlock = printlock_w39v040c, + .write = write_jedec_1, + .read = read_memmapped, + .voltage = {3000, 3600}, + }, + + { + .vendor = "Winbond", + .name = "W39V040FA", + .bustype = BUS_FWH, + .manufacture_id = WINBOND_ID, + .model_id = WINBOND_W39V040FA, + .total_size = 512, + .page_size = 64 * 1024, + .feature_bits = FEATURE_REGISTERMAP | FEATURE_EITHER_RESET, + .tested = TEST_OK_PREW, + .probe = probe_jedec, + .probe_timing = 10, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 128} }, + .block_erase = erase_block_jedec, + }, { + .eraseblocks = { {64 * 1024, 8} }, + .block_erase = erase_sector_jedec, + }, { + .eraseblocks = { {512 * 1024, 1} }, + .block_erase = erase_chip_block_jedec, + } + }, + .printlock = printlock_w39v040fa, + .unlock = unlock_sst_fwhub, + .write = write_jedec_1, + .read = read_memmapped, + .voltage = {3000, 3600}, + }, + + { + .vendor = "Winbond", + .name = "W39V040FB", + .bustype = BUS_FWH, + .manufacture_id = WINBOND_ID, + .model_id = WINBOND_W39V040B, + .total_size = 512, + .page_size = 64 * 1024, + .feature_bits = FEATURE_REGISTERMAP | FEATURE_EITHER_RESET, + .tested = TEST_OK_PREW, + .probe = probe_jedec, + .probe_timing = 10, + .block_erasers = + { + { + .eraseblocks = { {64 * 1024, 8} }, + .block_erase = erase_sector_jedec, + }, { + .eraseblocks = { {512 * 1024, 1} }, + .block_erase = erase_chip_block_jedec, + } + }, + .printlock = printlock_w39v040fb, + .unlock = unlock_w39v040fb, + .write = write_jedec_1, + .read = read_memmapped, + .voltage = {3000, 3600}, /* Also has 12V fast program */ + }, + + { + .vendor = "Winbond", + .name = "W39V040FC", + .bustype = BUS_FWH, + .manufacture_id = WINBOND_ID, + .model_id = WINBOND_W39V040C, + .total_size = 512, + .page_size = 64 * 1024, + .feature_bits = FEATURE_REGISTERMAP | FEATURE_EITHER_RESET, + .tested = TEST_OK_PREW, + .probe = probe_jedec, + .probe_timing = 10, + .block_erasers = + { + { + .eraseblocks = { {64 * 1024, 8} }, + .block_erase = erase_sector_jedec, + }, { + .eraseblocks = { {512 * 1024, 1} }, + .block_erase = erase_chip_block_jedec, + } + }, + .printlock = printlock_w39v040fc, + .write = write_jedec_1, + .read = read_memmapped, + .voltage = {3000, 3600}, /* Also has 12V fast program */ + }, + + { + .vendor = "Winbond", + .name = "W39V080A", + .bustype = BUS_LPC, + .manufacture_id = WINBOND_ID, + .model_id = WINBOND_W39V080A, + .total_size = 1024, + .page_size = 64 * 1024, + .feature_bits = FEATURE_EITHER_RESET, + .tested = TEST_OK_PREW, + .probe = probe_jedec, + .probe_timing = 10, + .block_erasers = + { + { + .eraseblocks = { {64 * 1024, 16} }, + .block_erase = erase_sector_jedec, + }, { + .eraseblocks = { {1024 * 1024, 1} }, + .block_erase = erase_chip_block_jedec, + } + }, + .printlock = printlock_w39v080a, + .write = write_jedec_1, + .read = read_memmapped, + .voltage = {3000, 3600}, + }, + + { + .vendor = "Winbond", + .name = "W49F002U/N", + .bustype = BUS_PARALLEL, + .manufacture_id = WINBOND_ID, + .model_id = WINBOND_W49F002U, + .total_size = 256, + .page_size = 128, + .feature_bits = FEATURE_EITHER_RESET, + .tested = TEST_OK_PREW, + .probe = probe_jedec, + .probe_timing = 10, + .block_erasers = + { + { + .eraseblocks = { + {128 * 1024, 1}, + {96 * 1024, 1}, + {8 * 1024, 2}, + {16 * 1024, 1}, + }, + .block_erase = erase_sector_jedec, + }, { + .eraseblocks = { {256 * 1024, 1} }, + .block_erase = erase_chip_block_jedec, + } + }, + .write = write_jedec_1, + .read = read_memmapped, + .voltage = {4500, 5500}, + }, + + { + .vendor = "Winbond", + .name = "W49F020", + .bustype = BUS_PARALLEL, + .manufacture_id = WINBOND_ID, + .model_id = WINBOND_W49F020, + .total_size = 256, + .page_size = 128, + .feature_bits = FEATURE_EITHER_RESET, + .tested = TEST_OK_PROBE, + .probe = probe_jedec, + .probe_timing = 10, + .block_erasers = + { + { + .eraseblocks = { {256 * 1024, 1} }, + .block_erase = erase_chip_block_jedec, + } + }, + .write = write_jedec_1, + .read = read_memmapped, + .voltage = {4500, 5500}, + }, + + { + .vendor = "Winbond", + .name = "W49V002A", + .bustype = BUS_LPC, + .manufacture_id = WINBOND_ID, + .model_id = WINBOND_W49V002A, + .total_size = 256, + .page_size = 128, + .feature_bits = FEATURE_EITHER_RESET, + .tested = TEST_OK_PREW, + .probe = probe_jedec, + .probe_timing = 10, + .block_erasers = + { + { + .eraseblocks = { + {64 * 1024, 3}, + {32 * 1024, 1}, + {8 * 1024, 2}, + {16 * 1024, 1}, + }, + .block_erase = erase_sector_jedec, + }, { + .eraseblocks = { {256 * 1024, 1} }, + .block_erase = erase_chip_block_jedec, + } + }, + .write = write_jedec_1, + .read = read_memmapped, + .voltage = {3000, 3600}, + }, + + { + .vendor = "Winbond", + .name = "W49V002FA", + .bustype = BUS_FWH, + .manufacture_id = WINBOND_ID, + .model_id = WINBOND_W49V002FA, + .total_size = 256, + .page_size = 128, + .feature_bits = FEATURE_EITHER_RESET, + .tested = TEST_OK_PREW, + .probe = probe_jedec, + .probe_timing = 10, + .block_erasers = + { + { + .eraseblocks = { + {64 * 1024, 3}, + {32 * 1024, 1}, + {8 * 1024, 2}, + {16 * 1024, 1}, + }, + .block_erase = erase_sector_jedec, + }, { + .eraseblocks = { {256 * 1024, 1} }, + .block_erase = erase_chip_block_jedec, + } + }, + .write = write_jedec_1, + .read = read_memmapped, + .voltage = {3000, 3600}, + }, + + { + .vendor = "Winbond", + .name = "W39V080FA", + .bustype = BUS_FWH, + .manufacture_id = WINBOND_ID, + .model_id = WINBOND_W39V080FA, + .total_size = 1024, + .page_size = 64 * 1024, + .feature_bits = FEATURE_REGISTERMAP | FEATURE_EITHER_RESET, + .tested = TEST_OK_PREW, + .probe = probe_jedec, + .probe_timing = 10, + .block_erasers = + { + { + .eraseblocks = { {64 * 1024, 16}, }, + .block_erase = erase_sector_jedec, + }, { + .eraseblocks = { {1024 * 1024, 1} }, + .block_erase = erase_chip_block_jedec, + } + }, + .printlock = printlock_w39v080fa, + .unlock = unlock_w39v080fa, + .write = write_jedec_1, + .read = read_memmapped, + .voltage = {3000, 3600}, /* Also has 12V fast program */ + }, + + { + .vendor = "Winbond", + .name = "W39V080FA (dual mode)", + .bustype = BUS_FWH, + .manufacture_id = WINBOND_ID, + .model_id = WINBOND_W39V080FA_DM, + .total_size = 512, + .page_size = 64 * 1024, + .feature_bits = FEATURE_REGISTERMAP | FEATURE_EITHER_RESET, + .tested = TEST_UNTESTED, + .probe = probe_jedec, + .probe_timing = 10, + .block_erasers = + { + { + .eraseblocks = { {64 * 1024, 8}, }, + .block_erase = erase_sector_jedec, + }, { + .eraseblocks = { {512 * 1024, 1} }, + .block_erase = erase_chip_block_jedec, + } + }, + .printlock = printlock_w39v080fa_dual, + .write = write_jedec_1, + .read = read_memmapped, + .voltage = {3000, 3600}, /* Also has 12V fast program */ + }, + + { + .vendor = "Unknown", + .name = "SFDP-capable chip", + .bustype = BUS_SPI, + .manufacture_id = GENERIC_MANUF_ID, + .model_id = SFDP_DEVICE_ID, + /* We present our own "report this" text hence we do not + * want the default "This flash part has status UNTESTED..." + * text to be printed. */ + .tested = TEST_OK_PREW, + .probe = probe_spi_sfdp, + .unlock = spi_disable_blockprotect, /* is this safe? */ + .read = spi_chip_read, + /* FIXME: some vendor extensions define this */ + .voltage = {0}, + /* Everything below will be set by the probing function. */ + .write = NULL, + .total_size = 0, + .page_size = 0, + .feature_bits = 0, + .block_erasers = {}, + }, + + { + .vendor = "Programmer", + .name = "Opaque flash chip", + .bustype = BUS_PROG, + .manufacture_id = PROGMANUF_ID, + .model_id = PROGDEV_ID, + .total_size = 0, + .page_size = 256, + /* probe is assumed to work, rest will be filled in by probe */ + .tested = TEST_OK_PROBE, + .probe = probe_opaque, + /* eraseblock sizes will be set by the probing function */ + .block_erasers = + { + { + .block_erase = erase_opaque, + } + }, + .write = write_opaque, + .read = read_opaque, + }, + + { + .vendor = "AMIC", + .name = "unknown AMIC SPI chip", + .bustype = BUS_SPI, + .manufacture_id = AMIC_ID, + .model_id = GENERIC_DEVICE_ID, + .total_size = 0, + .page_size = 256, + .tested = TEST_BAD_PREW, + .probe = probe_spi_rdid4, + .probe_timing = TIMING_ZERO, + .write = NULL, + .read = NULL, + }, + + { + .vendor = "Atmel", + .name = "unknown Atmel SPI chip", + .bustype = BUS_SPI, + .manufacture_id = ATMEL_ID, + .model_id = GENERIC_DEVICE_ID, + .total_size = 0, + .page_size = 256, + .tested = TEST_BAD_PREW, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .write = NULL, + .read = NULL, + }, + + { + .vendor = "Eon", + .name = "unknown Eon SPI chip", + .bustype = BUS_SPI, + .manufacture_id = EON_ID_NOPREFIX, + .model_id = GENERIC_DEVICE_ID, + .total_size = 0, + .page_size = 256, + .tested = TEST_BAD_PREW, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .write = NULL, + .read = NULL, + }, + + { + .vendor = "Macronix", + .name = "unknown Macronix SPI chip", + .bustype = BUS_SPI, + .manufacture_id = MACRONIX_ID, + .model_id = GENERIC_DEVICE_ID, + .total_size = 0, + .page_size = 256, + .tested = TEST_BAD_PREW, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .write = NULL, + .read = NULL, + }, + + { + .vendor = "PMC", + .name = "unknown PMC SPI chip", + .bustype = BUS_SPI, + .manufacture_id = PMC_ID, + .model_id = GENERIC_DEVICE_ID, + .total_size = 0, + .page_size = 256, + .tested = TEST_BAD_PREW, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .write = NULL, + .read = NULL, + }, + + { + .vendor = "SST", + .name = "unknown SST SPI chip", + .bustype = BUS_SPI, + .manufacture_id = SST_ID, + .model_id = GENERIC_DEVICE_ID, + .total_size = 0, + .page_size = 256, + .tested = TEST_BAD_PREW, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .write = NULL, + .read = NULL, + }, + + { + .vendor = "ST", + .name = "unknown ST SPI chip", + .bustype = BUS_SPI, + .manufacture_id = ST_ID, + .model_id = GENERIC_DEVICE_ID, + .total_size = 0, + .page_size = 256, + .tested = TEST_BAD_PREW, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .write = NULL, + .read = NULL, + }, + + { + .vendor = "Sanyo", + .name = "unknown Sanyo SPI chip", + .bustype = BUS_SPI, + .manufacture_id = SANYO_ID, + .model_id = GENERIC_DEVICE_ID, + .total_size = 0, + .page_size = 256, + .tested = TEST_BAD_PREW, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .write = NULL, + .read = NULL, + }, + + { + .vendor = "Winbond", + .name = "unknown Winbond (ex Nexcom) SPI chip", + .bustype = BUS_SPI, + .manufacture_id = WINBOND_NEX_ID, + .model_id = GENERIC_DEVICE_ID, + .total_size = 0, + .page_size = 256, + .tested = TEST_BAD_PREW, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .write = NULL, + .read = NULL, + }, + + { + .vendor = "Generic", + .name = "unknown SPI chip (RDID)", + .bustype = BUS_SPI, + .manufacture_id = GENERIC_MANUF_ID, + .model_id = GENERIC_DEVICE_ID, + .total_size = 0, + .page_size = 256, + .tested = TEST_BAD_PREW, + .probe = probe_spi_rdid, + .write = NULL, + }, + + { + .vendor = "Generic", + .name = "unknown SPI chip (REMS)", + .bustype = BUS_SPI, + .manufacture_id = GENERIC_MANUF_ID, + .model_id = GENERIC_DEVICE_ID, + .total_size = 0, + .page_size = 256, + .tested = TEST_BAD_PREW, + .probe = probe_spi_rems, + .write = NULL, + }, + + {0} +}; + +const unsigned int flashchips_size = ARRAY_SIZE(flashchips); |