diff options
Diffstat (limited to 'docs/install/t60_unbrick.html')
| -rw-r--r-- | docs/install/t60_unbrick.html | 14 |
1 files changed, 7 insertions, 7 deletions
diff --git a/docs/install/t60_unbrick.html b/docs/install/t60_unbrick.html index d05078c..e92298b 100644 --- a/docs/install/t60_unbrick.html +++ b/docs/install/t60_unbrick.html @@ -26,7 +26,7 @@ Types of brick: <ul> <li><a href="#bucts_brick">Brick type 1: bucts not reset</a></li> - <li><a href="#recovery">Brick type 2: bad rom (or user error), machine won't boot</a></li> + <li><a href="#recovery">Brick type 2: bad rom (or user error), system won't boot</a></li> </ul> </li> </ul> @@ -45,7 +45,7 @@ dd if=coreboot.rom of=top64k.bin bs=1 skip=$[$(stat -c %s coreboot.rom) - 0x10000] count=64k<br/> dd if=coreboot.rom bs=1 skip=$[$(stat -c %s coreboot.rom) - 0x20000] count=64k | hexdump<br/> dd if=top64k.bin of=coreboot.rom bs=1 seek=$[$(stat -c %s coreboot.rom) - 0x20000] count=64k conv=notrunc<br/> - (doing this makes the ROM suitable for use when flashing a machine that still has Lenovo BIOS running, + (doing this makes the ROM suitable for use when flashing a system that still has Lenovo BIOS running, using those instructions: <a href="http://www.coreboot.org/Board:lenovo/x60/Installation">http://www.coreboot.org/Board:lenovo/x60/Installation</a>. (it says x60, but instructions for t60 are identical) </p> @@ -53,14 +53,14 @@ <div class="section"> - <h1 id="recovery">bad rom (or user error), machine won't boot</h1> + <h1 id="recovery">bad rom (or user error), system won't boot</h1> <p> - In this scenario, you compiled a ROM that had an incorrect configuration, or there is an actual bug preventing your machine from - booting. Or, maybe, you set BUC.TS to 0 and shut down after first flash while Lenovo BIOS was running. In any case, your machine is bricked and will not boot at all. + In this scenario, you compiled a ROM that had an incorrect configuration, or there is an actual bug preventing your system from + booting. Or, maybe, you set BUC.TS to 0 and shut down after first flash while Lenovo BIOS was running. In any case, your system is bricked and will not boot at all. </p> <p> - "Unbricking" means flashing a known-good (working) ROM. The problem: you can't boot the machine, making this difficult. In this situation, external hardware (see hardware requirements above) is needed which can flash the SPI chip (where libreboot resides). + "Unbricking" means flashing a known-good (working) ROM. The problem: you can't boot the system, making this difficult. In this situation, external hardware (see hardware requirements above) is needed which can flash the SPI chip (where libreboot resides). </p> <p> @@ -156,7 +156,7 @@ <p> Remove the shielding containing the motherboard, then flip it over. Remove these screws, placing them on a steady surface in the same layout as they were in before you removed them. Also, you should mark each screw hole after removing the - screw (a permanent marker pen will do), this is so that you have a point of reference when re-assembling the machine:<br/> + screw (a permanent marker pen will do), this is so that you have a point of reference when re-assembling the system:<br/> <img src="../images/t60_dev/0027.JPG" alt="" /> <img src="../images/t60_dev/0028.JPG" alt="" /> <img src="../images/t60_dev/0029.JPG" alt="" /> <img src="../images/t60_dev/0031.JPG" alt="" /> <img src="../images/t60_dev/0032.JPG" alt="" /> <img src="../images/t60_dev/0033.JPG" alt="" /> </p> |