diff options
Diffstat (limited to 'docs/install/bbb_setup.html')
| -rw-r--r-- | docs/install/bbb_setup.html | 10 |
1 files changed, 5 insertions, 5 deletions
diff --git a/docs/install/bbb_setup.html b/docs/install/bbb_setup.html index ebcc7d2..dacd254 100644 --- a/docs/install/bbb_setup.html +++ b/docs/install/bbb_setup.html @@ -96,17 +96,17 @@ ATX PSU pinouts are on <a href="https://en.wikipedia.org/wiki/Power_supply_unit_%28computer%29#Wiring_diagrams">wikipedia</a> </p> <p> - On 20-pin ATX PSUs, you can use pin 1 or 2 (orange) for 3.3V, and any of the ground/earth sources (black cables). - Short PS_ON# / Power on (green) to a ground (black. there is one right next to it) using a wire/paperclip/jumper then + On 20-pin ATX PSUs, you can use pin 1 or 2 on a 20-pin ATX PSU (or pin 12 on a 24-pin ATX PSU) for 3.3V, + and any of the ground/earth sources (black cables). + Short PS_ON# / Power on (pin 16 on 24-pin ATX PSU, or pin 14 on a 20-pin ATX PSU) to a ground + (black. there is one right next to it) using a wire/paperclip/jumper then power on the PSU. </p> <p> On newer 24-pin ATX PSUs, there is an additional 3.3V (orange) on pin 12. </p> <p> - You only need one 3.3V supply and one ground for the flash chip, after grounding PS_ON# to ground. - Multiple 3.3V supplies means that you could theoretically power multiple flash chips at once with the - same PSU. + You only need one 3.3V supply and one ground for the flash chip, after grounding PS_ON#. </p> <p> |