diff options
Diffstat (limited to 'docs/hardware/x60_heatsink.html')
| -rw-r--r-- | docs/hardware/x60_heatsink.html | 259 |
1 files changed, 134 insertions, 125 deletions
diff --git a/docs/hardware/x60_heatsink.html b/docs/hardware/x60_heatsink.html index a591e75..178af56 100644 --- a/docs/hardware/x60_heatsink.html +++ b/docs/hardware/x60_heatsink.html @@ -13,132 +13,141 @@ <body> - <header> + <div class="section"> <h1>Changing the fan/heatsink on the ThinkPad X60</h1> - <aside>This guide will teach you how to replace the fan and heatsink on your ThinkPad X60.</aside> - </header> - - <p>Or go <a href="index.html">back to main index</a></p> - - <h2>Table of Contents</h2> - <ul> - <li><a href="#hardware_requirements">Hardware Requirements</a></li> - <li><a href="#software_requirements">Software Requirements</a></li> - <li><a href="#procedure">The procedure</a></li> - </ul> - - <h1 id="hardware_requirements">Hardware requirements</h1> - <ul> - <li>isopropyl alcohol (sometimes called rubbing alcohol)</li> - <li>your new fan and/or heatsink</li> - <li>CPU thermal compound (some say Arctic Silver 5 or IC Diamond 7 are good, others are also 'ok')</li> - <li>Something to spread the paste with</li> - </ul> - - <h1 id="software_requirements">Software requirements (for CPU stress testing)</h1> - <ul> - <li>xsensors utility</li> - <li>stress utility</li> - </ul> - - <h1 id="procedure">Disassembly</h1> - <p> - Remove those screws:<br/> - <img src="../images/x60_heatsink/0000.jpg" alt="" /> - </p> - <p> - Push the keyboard forward (carefully):<br/> - <img src="../images/x60_heatsink/0001.jpg" alt="" /> - </p> - <p> - Lift the keyboard up and disconnect it from the board:<br/> - <img src="../images/x60_heatsink/0002.jpg" alt="" /> - </p> - <p> - Grab the right-hand side of the chassis and force it off (gently) and pry up the rest of the chassis:<br/> - <img src="../images/x60_heatsink/0003.jpg" alt="" /> - </p> - <p> - You should now have this:<br/> - <img src="../images/x60_heatsink/0004.jpg" alt="" /> - </p> - <p> - Disconnect the wifi antenna cables, the modem cable and the speaker:<br/> - <img src="../images/x60_heatsink/0005.jpg" alt="" /> - </p> - <p> - Unroute the cables along their path, carefully lifting the tape that holds them in place. Then, disconnect the modem - cable (other end) and power connection and unroute all the cables so that they dangle by the monitor hinge on the right-hand - side:<br/> - <img src="../images/x60_heatsink/0006.jpg" alt="" /> - </p> - <p> - Disconnect the monitor from the motherboard, and unroute the grey antenna cable, carefully lifting the tape - that holds it into place:<br/> - <img src="../images/x60_heatsink/0008.jpg" alt="" /> - </p> - <p> - Carefully lift the remaining tape and unroute the left antenna cable so that it is loose:<br/> - <img src="../images/x60_heatsink/0009.jpg" alt="" /> - </p> - <p> - Remove those screws:<br/> - <img src="../images/x60_heatsink/0011.jpg" alt="" /> - </p> - <p> - Remove those screws:<br/> - <img src="../images/x60_heatsink/0012.jpg" alt="" /> - </p> - <p> - Carefully remove the plate, like so:<br/> - <img src="../images/x60_heatsink/0013.jpg" alt="" /> - </p> - <p> - Remove the SATA connector:<br/> - <img src="../images/x60_heatsink/0014.jpg" alt="" /> - </p> - <p> - Now remove the motherboard (gently) and cast the lcd/chassis aside:<br/> - <img src="../images/x60_heatsink/0015.jpg" alt="" /> - </p> - <p> - Look at that black tape above the heatsink, remove it:<br/> - <img src="../images/x60_heatsink/0016.jpg" alt="" /> - </p> - <p> - Now you have removed it:<br/> - <img src="../images/x60_heatsink/0017.jpg" alt="" /> - </p> - - <p> - Disconnect the fan and remove all the screws, heatsink will easily come off:<br/> - <img src="../images/x60_heatsink/0018.jpg" alt="" /> - </p> - - <p> - Remove the old paste with a cloth (from the CPU and heatsink) and then clean both of them with the alcohol (to remove remaining residue of the paste). - Apply a pea-sized amount of paste to the both chipsets that the heatsink covered and spread it evenly (uniformally). - Finally reinstall the heatsink, reversing previous steps. - </p> - - <p> - <b>stress -c 2</b> command can be used to push the CPU to 100%, and <b>xsensors</b> (or <b>watch sensors</b> command) can be used to monitor heat. - Below 90C is ok. - </p> - -<hr/> - - <p> - Copyright © 2014 Francis Rowe <info@gluglug.org.uk><br/> - This document is released under the Creative Commons Attribution-ShareAlike 4.0 International Public License and all future versions. - A copy of the license can be found at <a href="../license.txt">../license.txt</a>. - </p> - - <p> - This document is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See <a href="../license.txt">../license.txt</a> for more information. - </p> + <p> + This guide will teach you how to replace the fan and heatsink on your ThinkPad X60. + </p> + <p><a href="index.html">Back to main index</a></p> + </div> + + <div class="section"> + <h1>Table of Contents</h1> + <ul> + <li><a href="#hardware_requirements">Hardware Requirements</a></li> + <li><a href="#software_requirements">Software Requirements</a></li> + <li><a href="#procedure">Disassembly</a></li> + </ul> + </div> + + <div class="section"> + <h1 id="hardware_requirements">Hardware requirements</h1> + <ul> + <li>isopropyl alcohol (sometimes called rubbing alcohol)</li> + <li>your new fan and/or heatsink</li> + <li>CPU thermal compound (some say Arctic Silver 5 or IC Diamond 7 are good, others are also 'ok')</li> + <li>Something to spread the paste with</li> + </ul> + </div> + + <div class="section"> + <h1 id="software_requirements">Software requirements (for CPU stress testing)</h1> + <ul> + <li>xsensors utility</li> + <li>stress utility</li> + </ul> + </div> + + <div class="section"> + <h1 id="procedure">Disassembly</h1> + <p> + Remove those screws:<br/> + <img src="../images/x60_heatsink/0000.jpg" alt="" /> + </p> + <p> + Push the keyboard forward (carefully):<br/> + <img src="../images/x60_heatsink/0001.jpg" alt="" /> + </p> + <p> + Lift the keyboard up and disconnect it from the board:<br/> + <img src="../images/x60_heatsink/0002.jpg" alt="" /> + </p> + <p> + Grab the right-hand side of the chassis and force it off (gently) and pry up the rest of the chassis:<br/> + <img src="../images/x60_heatsink/0003.jpg" alt="" /> + </p> + <p> + You should now have this:<br/> + <img src="../images/x60_heatsink/0004.jpg" alt="" /> + </p> + <p> + Disconnect the wifi antenna cables, the modem cable and the speaker:<br/> + <img src="../images/x60_heatsink/0005.jpg" alt="" /> + </p> + <p> + Unroute the cables along their path, carefully lifting the tape that holds them in place. Then, disconnect the modem + cable (other end) and power connection and unroute all the cables so that they dangle by the monitor hinge on the right-hand + side:<br/> + <img src="../images/x60_heatsink/0006.jpg" alt="" /> + </p> + <p> + Disconnect the monitor from the motherboard, and unroute the grey antenna cable, carefully lifting the tape + that holds it into place:<br/> + <img src="../images/x60_heatsink/0008.jpg" alt="" /> + </p> + <p> + Carefully lift the remaining tape and unroute the left antenna cable so that it is loose:<br/> + <img src="../images/x60_heatsink/0009.jpg" alt="" /> + </p> + <p> + Remove those screws:<br/> + <img src="../images/x60_heatsink/0011.jpg" alt="" /> + </p> + <p> + Remove those screws:<br/> + <img src="../images/x60_heatsink/0012.jpg" alt="" /> + </p> + <p> + Carefully remove the plate, like so:<br/> + <img src="../images/x60_heatsink/0013.jpg" alt="" /> + </p> + <p> + Remove the SATA connector:<br/> + <img src="../images/x60_heatsink/0014.jpg" alt="" /> + </p> + <p> + Now remove the motherboard (gently) and cast the lcd/chassis aside:<br/> + <img src="../images/x60_heatsink/0015.jpg" alt="" /> + </p> + <p> + Look at that black tape above the heatsink, remove it:<br/> + <img src="../images/x60_heatsink/0016.jpg" alt="" /> + </p> + <p> + Now you have removed it:<br/> + <img src="../images/x60_heatsink/0017.jpg" alt="" /> + </p> + + <p> + Disconnect the fan and remove all the screws, heatsink will easily come off:<br/> + <img src="../images/x60_heatsink/0018.jpg" alt="" /> + </p> + + <p> + Remove the old paste with a cloth (from the CPU and heatsink) and then clean both of them with the alcohol (to remove remaining residue of the paste). + Apply a pea-sized amount of paste to the both chipsets that the heatsink covered and spread it evenly (uniformally). + Finally reinstall the heatsink, reversing previous steps. + </p> + + <p> + <b>stress -c 2</b> command can be used to push the CPU to 100%, and <b>xsensors</b> (or <b>watch sensors</b> command) can be used to monitor heat. + Below 90C is ok. + </p> + </div> + + <div class="section"> + <p> + Copyright © 2014, 2015 Francis Rowe <info@gluglug.org.uk><br/> + This document is released under the Creative Commons Attribution-ShareAlike 4.0 International Public License and all future versions. + A copy of the license can be found at <a href="../license.txt">../license.txt</a>. + </p> + + <p> + This document is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See <a href="../license.txt">../license.txt</a> for more information. + </p> + </div> </body> </html> |