diff options
Diffstat (limited to 'docs/future/dumps/t500log/flashrom_read.log')
| -rw-r--r-- | docs/future/dumps/t500log/flashrom_read.log | 123 |
1 files changed, 123 insertions, 0 deletions
diff --git a/docs/future/dumps/t500log/flashrom_read.log b/docs/future/dumps/t500log/flashrom_read.log new file mode 100644 index 0000000..b3e3d6a --- /dev/null +++ b/docs/future/dumps/t500log/flashrom_read.log @@ -0,0 +1,123 @@ +flashrom v0.9.8-r1889 on Linux 3.13.0-39-lowlatency (i686) +flashrom is free software, get the source code at http://www.flashrom.org + +flashrom was built with libpci 3.2.1, GCC 4.8.2, little endian +Command line (7 args): flashrom -V -p internal:laptop=force_I_want_a_brick -r rom.bin -c MX25L3205D/MX25L3208D +Calibrating delay loop... OS timer resolution is 1 usecs, 790M loops per second, 10 myus = 26 us, 100 myus = 100 us, 1000 myus = 1003 us, 10000 myus = 10018 us, 4 myus = 5 us, OK. +Initializing internal programmer +No coreboot table found. +Using Internal DMI decoder. +DMI string chassis-type: "Notebook" +Laptop detected via DMI. +DMI string system-manufacturer: "LENOVO" +DMI string system-product-name: "224397G" +DMI string system-version: "ThinkPad T500" +DMI string baseboard-manufacturer: "LENOVO" +DMI string baseboard-product-name: "224397G" +DMI string baseboard-version: "Not Available" +======================================================================== +WARNING! You seem to be running flashrom on an unsupported laptop. +Laptops, notebooks and netbooks are difficult to support and we +recommend to use the vendor flashing utility. The embedded controller +(EC) in these machines often interacts badly with flashing. +See the manpage and http://www.flashrom.org/Laptops for details. + +If flash is shared with the EC, erase is guaranteed to brick your laptop +and write may brick your laptop. +Read and probe may irritate your EC and cause fan failure, backlight +failure and sudden poweroff. +You have been warned. +======================================================================== +Proceeding anyway because user forced us to. +Found chipset "Intel ICH9M" with PCI ID 8086:2919. +Enabling flash write... Root Complex Register Block address = 0xfed1c000 +GCS = 0x380461: BIOS Interface Lock-Down: enabled, Boot BIOS Straps: 0x1 (SPI) +Top Swap: not enabled +0xfff80000/0xffb80000 FWH IDSEL: 0x0 +0xfff00000/0xffb00000 FWH IDSEL: 0x0 +0xffe80000/0xffa80000 FWH IDSEL: 0x0 +0xffe00000/0xffa00000 FWH IDSEL: 0x0 +0xffd80000/0xff980000 FWH IDSEL: 0x0 +0xffd00000/0xff900000 FWH IDSEL: 0x0 +0xffc80000/0xff880000 FWH IDSEL: 0x0 +0xffc00000/0xff800000 FWH IDSEL: 0x0 +0xff700000/0xff300000 FWH IDSEL: 0x4 +0xff600000/0xff200000 FWH IDSEL: 0x5 +0xff500000/0xff100000 FWH IDSEL: 0x6 +0xff400000/0xff000000 FWH IDSEL: 0x7 +0xfff80000/0xffb80000 FWH decode enabled +0xfff00000/0xffb00000 FWH decode enabled +0xffe80000/0xffa80000 FWH decode enabled +0xffe00000/0xffa00000 FWH decode enabled +0xffd80000/0xff980000 FWH decode enabled +0xffd00000/0xff900000 FWH decode enabled +0xffc80000/0xff880000 FWH decode enabled +0xffc00000/0xff800000 FWH decode enabled +0xff700000/0xff300000 FWH decode disabled +0xff600000/0xff200000 FWH decode disabled +0xff500000/0xff100000 FWH decode disabled +0xff400000/0xff000000 FWH decode disabled +Maximum FWH chip size: 0x400000 bytes +SPI Read Configuration: prefetching disabled, caching enabled, +BIOS_CNTL = 0x01: BIOS Lock Enable: disabled, BIOS Write Enable: enabled +SPIBAR = 0xb7714000 + 0x3800 +0x04: 0xe008 (HSFS) +HSFS: FDONE=0, FCERR=0, AEL=0, BERASE=1, SCIP=0, FDOPSS=1, FDV=1, FLOCKDN=1 +Warning: SPI Configuration Lockdown activated. +Reading OPCODES... done +0x06: 0x3f04 (HSFC) +HSFC: FGO=0, FCYCLE=2, FDBC=63, SME=0 +0x50: 0x00001a1b (FRAP) +BMWAG 0x00, BMRAG 0x00, BRWA 0x1a, BRRA 0x1b +0x54: 0x00000000 FREG0: Warning: Flash Descriptor region (0x00000000-0x00000fff) is read-only. +0x58: 0x03ff0200 FREG1: BIOS region (0x00200000-0x003fffff) is read-write. +0x5C: 0x01f50001 FREG2: Warning: Management Engine region (0x00001000-0x001f5fff) is locked. +0x60: 0x01f701f6 FREG3: Gigabit Ethernet region (0x001f6000-0x001f7fff) is read-write. +0x64: 0x01ff01f8 FREG4: Platform Data region (0x001f8000-0x001fffff) is read-write. +Not all flash regions are freely accessible by flashrom. This is most likely +due to an active ME. Please see http://flashrom.org/ME for details. +0x74: 0x9fff03e0 PR0: Warning: 0x003e0000-0x01ffffff is read-only. +0x84: 0x81ff81f8 PR4: Warning: 0x001f8000-0x001fffff is locked. +Writes have been disabled for safety reasons. You can enforce write +support with the ich_spi_force programmer option, but you will most likely +harm your hardware! If you force flashrom you will get no support if +something breaks. On a few mainboards it is possible to enable write +access by setting a jumper (see its documentation or the board itself). +0x90: 0x04 (SSFS) +SSFS: SCIP=0, FDONE=1, FCERR=0, AEL=0 +0x91: 0x004130 (SSFC) +SSFC: SCGO=0, ACS=0, SPOP=0, COP=3, DBC=1, SME=0, SCF=0 +0x94: 0x5006 (PREOP) +0x96: 0x143b (OPTYPE) +0x98: 0x05200302 (OPMENU) +0x9C: 0x0601209f (OPMENU+4) +0xA0: 0x00000000 (BBAR) +0xC4: 0x00002005 (LVSCC) +LVSCC: BES=0x1, WG=1, WSR=0, WEWS=0, EO=0x20, VCL=0 +0xC8: 0x00002005 (UVSCC) +UVSCC: BES=0x1, WG=1, WSR=0, WEWS=0, EO=0x20 +0xD0: 0x00000000 (FPB) +OK. +The following protocols are supported: FWH, SPI. +Probing for Macronix MX25L3205D/MX25L3208D, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 +Found Macronix flash chip "MX25L3205D/MX25L3208D" (4096 kB, SPI) mapped at physical address 0xffc00000. +Chip status register is 0x00. +Chip status register: Status Register Write Disable (SRWD, SRP, ...) is not set +Chip status register: Bit 6 is not set +Chip status register: Block Protect 3 (BP3) is not set +Chip status register: Block Protect 2 (BP2) is not set +Chip status register: Block Protect 1 (BP1) is not set +Chip status register: Block Protect 0 (BP0) is not set +Chip status register: Write Enable Latch (WEL) is not set +Chip status register: Write In Progress (WIP/BUSY) is not set +This chip may contain one-time programmable memory. flashrom cannot read +and may never be able to write it, hence it may not be able to completely +clone the contents of this chip (see man page for details). +Reading flash... Transaction error! +SSFS: SCIP=0, FDONE=1, FCERR=1, AEL=0 +SSFC: SCGO=0, ACS=0, SPOP=0, COP=1, DBC=63, SME=0, SCF=0 +Running OPCODE 0x03 failed at address 0x001000 (payload length was 64). +Read operation failed! +FAILED. +Restoring MMIO space at 0xb77178a0 +Restoring PCI config space for 00:1f:0 reg 0xdc |