diff options
Diffstat (limited to 'build')
| -rwxr-xr-x | build | 122 |
1 files changed, 44 insertions, 78 deletions
@@ -1,7 +1,6 @@ #!/bin/bash -# -# build script: builds the ROM images with GRUB payloads and puts them in ./bin/ +# generic build script, for building libreboot (all of it) # # Copyright (C) 2014, 2015 Francis Rowe <info@gluglug.org.uk> # @@ -21,86 +20,53 @@ set -u -e -v -# Build the ROM images - -if [ ! -d "bin" ] -then - mkdir bin/ -fi - -# MAKE SURE THAT YOU RAN "buildall" OR "builddeps" *AT LEAST ONCE* -# BEFORE RUNNING THIS! - -# Put GRUB payloads and config files -# in the coreboot directory, ready for next step -cd coreboot/ -for romtype in txtmode vesafb -do - cd ../resources/utilities/grub-assemble - ./gen.sh "$romtype" - rm -f ../../../coreboot/grub_"$romtype".elf - mv grub_"$romtype".elf ../../../coreboot/ - cd ../../../coreboot +build=./resources/scripts/helpers/build +mode="unknown" +option="unknown" +extraoption="" - # GRUB configuration files - for keymap in $(ls ../resources/utilities/grub-assemble/keymap/original) - do - cat ../resources/grub/config/extra/common.cfg > grub_"$keymap"_"$romtype".cfg - cat ../resources/grub/config/extra/"$romtype".cfg >> grub_"$keymap"_"$romtype".cfg - echo "keymap $keymap" >> grub_"$keymap"_"$romtype".cfg - cat ../resources/grub/config/menuentries/common.cfg >> grub_"$keymap"_"$romtype".cfg - cat ../resources/grub/config/menuentries/"$romtype".cfg >> grub_"$keymap"_"$romtype".cfg - # grubtest.cfg should be able to switch back to grub.cfg - sed 's/grubtest.cfg/grub.cfg/' < grub_"$keymap"_"$romtype".cfg > grub_"$keymap"_"$romtype"_test.cfg - done -done -cd ../ +usage="./build mode option" +availablemodes="$(ls $build/)" +availableoptions="unknown" # unknown until the mode is determined -# Build ROM images for supported boards -for board in $(ls resources/libreboot/config/) -do - ./buildrom-withgrub $board -done - -# Needed on i945 systems for the bucts/dd trick (documented) -# This enables the ROM to be flashed over the lenovo bios firmware -for i945board in x60 t60 -do - cd bin/"$i945board"/ - for i945rom in $(ls) - do - dd if="$i945rom" of=top64k.bin bs=1 skip=$[$(stat -c %s "$i945rom") - 0x10000] count=64k - dd if=top64k.bin of="$i945rom" bs=1 seek=$[$(stat -c %s "$i945rom") - 0x20000] count=64k conv=notrunc - rm -f top64k.bin - done - cd ../../ -done +# User specified no or too few/many parameters +if (( $# != 2 )); then + if (( $# != 3 )); then + printf "$usage\n\n" + printf "possible values for 'mode':\n$availablemodes\n\n" + printf "Example: ./build module all\n" + printf "Example: ./build module flashrom\n" + printf "Example: ./build roms withgrub\n" + printf "Example: ./build release archives\n" + printf "Example: ./build clean all\n" + printf "Example (extra option) ./build module bucts static\n" + printf "Refer to the libreboot documentation for more info\n\n" + exit 1 + else + extraoption=$3 + fi +fi +mode=$1 +option=$2 -# Build the deblobbed descriptor+gbe regions for GM45/ICH9M targets. -# Then put them in the ROM images. -cd bin/ -../resources/utilities/ich9deblob/ich9gen -for board in "x200" "r400" -do - for romsize in "4m" "8m" - do - cd "$board"_"$romsize"b/ - for rom in $(ls) - do - dd if=../ich9fdgbe_"$romsize".bin of="$rom" bs=1 count=12k conv=notrunc +if [ -d "$build/$mode" ]; then + availableoptions="$(ls $build/$mode/)" + if [ "$option" = "list" ]; then + printf "Available options for '$mode' are:\nall\n$availableoptions\n\n" + elif [ -f "$build/$mode/$option" ]; then + $build/$mode/$option $extraoption + elif [ "$option" = "all" ]; then + for option in $availableoptions; do + $build/$mode/$option $extraoption done - cd ../ - done -done -rm -f ich9fdgbe_4m.bin -rm -f ich9fdgbe_8m.bin -cd ../ - -# The GRUB payloads are no longer needed -rm -f coreboot/grub_vesafb.elf -rm -f coreboot/grub_txtmode.elf -# The GRUB configs are no longer needed -rm -f coreboot/grub*cfg + else + printf "Invalid option for '$mode'. Available options are:\nall\n$availableoptions\n\n" + exit 1 + fi +else + printf "Invalid mode. Available modes are:\n$availablemodes\n\n" + exit 1 +fi # ------------------- DONE ---------------------- |