diff options
| -rwxr-xr-x | build-release | 2 | ||||
| -rwxr-xr-x | flash | 45 | ||||
| -rwxr-xr-x | lenovobios_firstflash | 106 | ||||
| -rwxr-xr-x | lenovobios_secondflash | 83 | ||||
| -rwxr-xr-x | macbook21_firstflash | 49 | ||||
| -rwxr-xr-x | x60flashfrom5 | 38 |
6 files changed, 98 insertions, 225 deletions
diff --git a/build-release b/build-release index b813238..91c76c9 100755 --- a/build-release +++ b/build-release @@ -403,5 +403,7 @@ rm -rf libreboot_src rm -rf libreboot_bin echo "DONE. See libreboot_src.tar.xz and libreboot_bin.tar.xz" +echo "NOTE FOR FCHMMR: don't forget to add ARM binaries for flashrom" +echo "NOTE FOR FCHMMR: don't forget to add i386 binaries for flashrom/bucts" # ------------------- DONE ---------------------- @@ -22,50 +22,31 @@ # set -u -e -v set -v -# These are the tested platforms -if [ $(uname -i) = "i686" ] || [ $(uname -m) = "i686" ] - then - echo "Running on i686. ok." - sleep 5 -elif [ $(uname -i) = "x86_64" ] || [ $(uname -m) = "x86_64" ] - then - echo "Running on x86_64. ok." - sleep 5 -else - echo "This script must be run on an i686 or x86_64 host. x86_64 is recommended." - exit 1 -fi - -# the user must be root to use flashrom if [[ $EUID -ne 0 ]]; then echo "This script must be run as root" exit 1 fi - -# check that the user supplied a path to a ROM image: if (( $# != 1 )); then - echo "Usage: ./lenovobios_firstflash yourrom.rom" - echo "usage: ./lenovobios_firstflash path/to/yourrom.rom" + echo "Usage: ./flash yourrom.rom" + echo "usage: ./flash path/to/yourrom.rom" echo "You need to specify exactly 1 file" exit 1 fi -# if the user did supply a path, check that it exists: if [ ! -f $1 ]; then echo "File not found!" exit 1 fi -# Use flashrom to flash the ROM image: - +path="unknown" if [ -f "DEBLOB" ]; then - # Means we are in src archive or git - ./flashrom/flashrom -p internal -w $1 -elif [ $(uname -i) = "i686" ] || [ $(uname -m) = "i686" ] - then - # Means we are in bin archive and on an i686 host - ./flashrom/i686/flashrom -p internal -w $1 -elif [ $(uname -i) = "x86_64" ] || [ $(uname -m) = "x86_64" ] - then - # Means we are in bin archive and on an x86_64 host - ./flashrom/x86_64/flashrom -p internal -w $1 + path="./flashrom/flashrom" +elif [ $(uname -i) = "i686" ] || [ $(uname -m) = "i686" ]; then + path="./flashrom/i686/flashrom" +elif [ $(uname -i) = "x86_64" ] || [ $(uname -m) = "x86_64" ]; then + path="./flashrom/x86_64/flashrom" +else + echo "This script must be run on an i686 or x86_64 host. x86_64 is recommended." + exit 1 fi + +$(echo $path) -p internal -w $1 diff --git a/lenovobios_firstflash b/lenovobios_firstflash index e5c9178..9120001 100755 --- a/lenovobios_firstflash +++ b/lenovobios_firstflash @@ -22,42 +22,10 @@ # set -u -e -v set -v -if [ $(uname -i) = "i686" ] || [ $(uname -m) = "i686" ] - then - echo "Running on i686. ok." - sleep 5 -elif [ $(uname -i) = "x86_64" ] || [ $(uname -m) = "x86_64" ] - then - echo "Running on x86_64. ok." - sleep 5 -else - echo "This script must be run on an i686 or x86_64 host. x86_64 is recommended." - exit 1 -fi - if [[ $EUID -ne 0 ]]; then echo "This script must be run as root" exit 1 fi - -if [ $(uname -i) = "i686" ] || [ $(uname -m) = "i686" ] - then - echo "Running on i686. ok." - sleep 5 -elif [ $(uname -i) = "x86_64" ] || [ $(uname -m) = "x86_64" ] - then - echo "Running on x86_64" - sleep 5 -else - echo "This script must be run on an i686 or x86_64 host. x86_64 is recommended." - exit 1 -fi - -# USE ROOT OR SUDO WHEN EXECUTING THIS - -# for T60 or X60 owners with Lenovo BIOS -# does the 1st part of the flash before shut down - if (( $# != 1 )); then echo "Usage: ./lenovobios_firstflash yourrom.rom" echo "usage: ./lenovobios_firstflash path/to/yourrom.rom" @@ -69,56 +37,40 @@ if [ ! -f $1 ]; then exit 1 fi +bucts="unknown" +flashromsst="unknown" +flashrommacronix="unknown" +if [ -f "DEBLOB" ]; then + bucts="./bucts/bucts" + flashromsst="./flashrom/flashrom_lenovobios_sst" + flashrommacronix="./flashrom/flashrom_lenovobios_macronix" +elif [ $(uname -i) = "i686" ] || [ $(uname -m) = "i686" ]; then + bucts="./bucts/i686/bucts" + flashromsst="./flashrom/i686/flashrom_lenovobios_sst" + flashrommacronix="./flashrom/i686/flashrom_lenovobios_macronix" +elif [ $(uname -i) = "x86_64" ] || [ $(uname -m) = "x86_64" ]; then + bucts="./bucts/x86_64/bucts" + flashromsst="./flashrom/x86_64/flashrom_lenovobios_sst" + flashrommacronix="./flashrom/x86_64/flashrom_lenovobios_macronix" +else + echo "This script must be run on an i686 or x86_64 host. x86_64 is recommended." + exit 1 +fi + +# Set mucts $errOut = " \ BUCTS failed. Make sure BUC.TS is 1, or else you will brick your machine. \ ABORTING so as to protect against bricking the machine. \ " -if [ ! -f "DEBLOB" ] - then - # this means we are working in bin - if [ $(uname -i) = "i686" ] || [ $(uname -m) = "i686" ] - then - # i686 - # needed for first flashing, otherwise machine will be bricked - if [ ! -f "bucts/i686/bucts" ]; then - echo "$errOut" - exit 1 - fi - ./bucts/i686/bucts 1 - else - # x86_64 - # needed for first flashing, otherwise machine will be bricked - if [ ! -f "bucts/x86_64/bucts" ]; then - echo "$errOut" - exit 1 - fi - ./bucts/x86_64/bucts 1 - fi -else - # this means we are working in src - # needed for first flashing, otherwise machine will be bricked - if [ ! -f "bucts/bucts" ]; then - echo "$errOut" - exit 1 - fi - ./bucts/bucts 1 +# this means we are working in src +if [ ! -f "$bucts" ]; then + echo "$errOut" + exit 1 fi -# run both. one will fail (and be harmless), the other will succeed. +$(echo $bucts) 1 + +$(echo $flashromsst) -p internal -w $1 +$(echo $flashrommacronix) -p internal -w $1 -if [ -f "DEBLOB" ]; then - # Means we are in src archive or git - ./flashrom/flashrom_lenovobios_sst -p internal -w $1 - ./flashrom/flashrom_lenovobios_macronix -p internal -w $1 -elif [ $(uname -i) = "i686" ] || [ $(uname -m) = "i686" ] - then - # Means we are in bin archive and on an i686 host - ./flashrom/i686/flashrom_lenovobios_sst -p internal -w $1 - ./flashrom/i686/flashrom_lenovobios_macronix -p internal -w $1 -elif [ $(uname -i) = "x86_64" ] || [ $(uname -m) = "x86_64" ] - then - # Means we are in bin archive and on an x86_64 host - ./flashrom/x86_64/flashrom_lenovobios_sst -p internal -w $1 - ./flashrom/x86_64/flashrom_lenovobios_macronix -p internal -w $1 -fi diff --git a/lenovobios_secondflash b/lenovobios_secondflash index f1a9fb3..348e734 100755 --- a/lenovobios_secondflash +++ b/lenovobios_secondflash @@ -22,32 +22,13 @@ # set -u -e -v set -v -if [ $(uname -i) = "i686" ] || [ $(uname -m) = "i686" ] - then - echo "Running on i686. ok." - sleep 5 -elif [ $(uname -i) = "x86_64" ] || [ $(uname -m) = "x86_64" ] - then - echo "Running on x86_64. ok." - sleep 5 -else - echo "This script must be run on an i686 or x86_64 host. x86_64 is recommended." - exit 1 -fi - if [[ $EUID -ne 0 ]]; then echo "This script must be run as root" exit 1 fi - -# USE ROOT OR SUDO WHEN EXECUTING THIS - -# for T60 or X60 owners with Lenovo BIOS -# does the 1st part of the flash before shut down - if (( $# != 1 )); then - echo "Usage: ./lenovobios_firstflash yourrom.rom" - echo "usage: ./lenovobios_firstflash path/to/yourrom.rom" + echo "Usage: ./lenovobios_secondflash yourrom.rom" + echo "usage: ./lenovobios_secondflash path/to/yourrom.rom" echo "You need to specify exactly 1 file" exit 1 fi @@ -56,51 +37,37 @@ if [ ! -f $1 ]; then exit 1 fi -# Flash it a 2nd time, to write upper 64K block +# boardmismatch=force is for people upgrading from libreboot 5th release, where the new ROM's are "ThinkPad X60 / X60s / X60t" +# and the old ones are "ThinkPad X60 / X60s" and flashrom complains otherwise + +bucts="unknown" +flashrom="unknown" if [ -f "DEBLOB" ]; then - # Means we are in src archive or git - ./flashrom/flashrom -p internal -w $1 -elif [ $(uname -i) = "i686" ] || [ $(uname -m) = "i686" ] - then - # Means we are in bin archive and on an i686 host - ./flashrom/i686/flashrom -p internal -w $1 -elif [ $(uname -i) = "x86_64" ] || [ $(uname -m) = "x86_64" ] - then - # Means we are in bin archive and on an x86_64 host - ./flashrom/x86_64/flashrom -p internal -w $1 + bucts="./bucts/bucts" + flashrom="./flashrom/flashrom" +elif [ $(uname -i) = "i686" ] || [ $(uname -m) = "i686" ]; then + bucts="./bucts/i686/bucts" + flashrom="./flashrom/i686/flashrom" +elif [ $(uname -i) = "x86_64" ] || [ $(uname -m) = "x86_64" ]; then + bucts="./bucts/x86_64/bucts" + flashrom="./flashrom/x86_64/flashrom" +else + echo "This script must be run on an i686 or x86_64 host. x86_64 is recommended." + exit 1 fi +$(echo $flashrom) -p internal -w $1 + # Reset bucts back to zero $errOut = " \ WARNING: bucts not found, but if the image was flashed then it's probably safe \ A dd'd image (like libreboot's images) flashed with bucts=1 is ok. If the image is not dd'd and bucts=1, \ then you should run ./bucts 0 now, or remove the yellow cmos/nvram battery for a minute. \ " -if [ ! -f "DEBLOB" ] - then - # this means we are working in bin - if [ $(uname -i) = "i686" ] || [ $(uname -m) = "i686" ] - then - # i686 - if [ ! -f "bucts/i686/bucts" ]; then - echo "$errOut" - exit 1 - fi - ./bucts/i686/bucts 0 - else - # x86_64 - if [ ! -f "bucts/x86_64/bucts" ]; then - echo "$errOut" - exit 1 - fi - ./bucts/x86_64/bucts 0 - fi -else - # this means we are working in src - if [ ! -f "bucts/bucts" ]; then - echo "$errOut" - exit 1 - fi - ./bucts/bucts 0 +# this means we are working in src +if [ ! -f "$bucts" ]; then + echo "$errOut" + exit 1 fi +$(echo $bucts) 0 diff --git a/macbook21_firstflash b/macbook21_firstflash index 1b31401..31fd813 100755 --- a/macbook21_firstflash +++ b/macbook21_firstflash @@ -18,34 +18,17 @@ # along with this program. If not, see <http://www.gnu.org/licenses/>. # -## Don't add this here. Errors are *expected* +## Don't add here. errors are expected. # set -u -e -v set -v -if [ $(uname -i) = "i686" ] || [ $(uname -m) = "i686" ] - then - echo "Running on i686. ok." - sleep 5 -elif [ $(uname -i) = "x86_64" ] || [ $(uname -m) = "x86_64" ] - then - echo "Running on x86_64. ok." - sleep 5 -else - echo "This script must be run on an i686 or x86_64 host. x86_64 is recommended." - exit 1 -fi - if [[ $EUID -ne 0 ]]; then echo "This script must be run as root" exit 1 fi - -# USE ROOT OR SUDO WHEN EXECUTING THIS -# uses flashrom to flash the rom - if (( $# != 1 )); then - echo "Usage: ./lenovobios_firstflash yourrom.rom" - echo "usage: ./lenovobios_firstflash path/to/yourrom.rom" + echo "Usage: ./macbook21_firstflash yourrom.rom" + echo "usage: ./macbook21_firstflash path/to/yourrom.rom" echo "You need to specify exactly 1 file" exit 1 fi @@ -54,18 +37,20 @@ if [ ! -f $1 ]; then exit 1 fi -# flashrom doesn't recognize the machine unless you use that switch: laptop=force_I_want_a_brick -# after flashing libreboot and booting the machine, flashing normally will just work. +# boardmismatch=force is for people upgrading from libreboot 5th release, where the new ROM's are "ThinkPad X60 / X60s / X60t" +# and the old ones are "ThinkPad X60 / X60s" and flashrom complains otherwise +path="unknown" if [ -f "DEBLOB" ]; then - # Means we are in src archive or git - ./flashrom/flashrom -p internal:laptop=force_I_want_a_brick -w $1 -elif [ $(uname -i) = "i686" ] || [ $(uname -m) = "i686" ] - then - # Means we are in bin archive and on an i686 host - ./flashrom/i686/flashrom -p internal:laptop=force_I_want_a_brick -w $1 -elif [ $(uname -i) = "x86_64" ] || [ $(uname -m) = "x86_64" ] - then - # Means we are in bin archive and on an x86_64 host - ./flashrom/x86_64/flashrom -p internal:laptop=force_I_want_a_brick -w $1 + path="./flashrom/flashrom" +elif [ $(uname -i) = "i686" ] || [ $(uname -m) = "i686" ]; then + path="./flashrom/i686/flashrom" +elif [ $(uname -i) = "x86_64" ] || [ $(uname -m) = "x86_64" ]; then + path="./flashrom/x86_64/flashrom" +else + echo "This script must be run on an i686 or x86_64 host. x86_64 is recommended." + exit 1 fi + +$(echo $path) -p internal:laptop=force_I_want_a_brick -w $1 + diff --git a/x60flashfrom5 b/x60flashfrom5 index b9c3067..60ce99b 100755 --- a/x60flashfrom5 +++ b/x60flashfrom5 @@ -22,27 +22,13 @@ # set -u -e -v set -v -if [ $(uname -i) = "i686" ] || [ $(uname -m) = "i686" ] - then - echo "Running on i686. ok." - sleep 5 -elif [ $(uname -i) = "x86_64" ] || [ $(uname -m) = "x86_64" ] - then - echo "Running on x86_64. ok." - sleep 5 -else - echo "This script must be run on an i686 or x86_64 host. x86_64 is recommended." - exit 1 -fi - if [[ $EUID -ne 0 ]]; then echo "This script must be run as root" exit 1 fi - if (( $# != 1 )); then - echo "Usage: ./lenovobios_firstflash yourrom.rom" - echo "usage: ./lenovobios_firstflash path/to/yourrom.rom" + echo "Usage: ./x60flashfrom5 yourrom.rom" + echo "usage: ./x60flashfrom5 path/to/yourrom.rom" echo "You need to specify exactly 1 file" exit 1 fi @@ -54,16 +40,16 @@ fi # boardmismatch=force is for people upgrading from libreboot 5th release, where the new ROM's are "ThinkPad X60 / X60s / X60t" # and the old ones are "ThinkPad X60 / X60s" and flashrom complains otherwise +path="unknown" if [ -f "DEBLOB" ]; then - # Means we are in src archive or git - ./flashrom/flashrom -p internal:boardmismatch=force -w $1 -elif [ $(uname -i) = "i686" ] || [ $(uname -m) = "i686" ] - then - # Means we are in bin archive and on an i686 host - ./flashrom/i686/flashrom -p internal:boardmismatch=force -w $1 -elif [ $(uname -i) = "x86_64" ] || [ $(uname -m) = "x86_64" ] - then - # Means we are in bin archive and on an x86_64 host - ./flashrom/x86_64/flashrom -p internal:boardmismatch=force -w $1 + path="./flashrom/flashrom" +elif [ $(uname -i) = "i686" ] || [ $(uname -m) = "i686" ]; then + path="./flashrom/i686/flashrom" +elif [ $(uname -i) = "x86_64" ] || [ $(uname -m) = "x86_64" ]; then + path="./flashrom/x86_64/flashrom" +else + echo "This script must be run on an i686 or x86_64 host. x86_64 is recommended." + exit 1 fi +$(echo $path) -p internal:boardmismatch=force -w $1 |