Documentation: clean up

1 files changed, 0 insertions, 105 deletions

diff --git a/docs/index.html b/docs/index.html
index 088080f..b24d95b 100644
--- a/docs/index.html
+++ b/docs/index.html
@@ -128,10 +128,6 @@
 
 	<h2>Miscallaneous</h2>
 		<ul>
-			<li><a href="#x60_wifi">ThinkPad X60: Enable or disable wifi</a></li>
-			<li><a href="#x60_bluetooth">ThinkPad X60: Enable or disable bluetooth</a></li>
-			<li><a href="#x60_trackpoint">ThinkPad X60: Enable or disable trackpoint</a></li>
-			<li><a href="#x60_backlight">ThinkPad X60: Prevent scrolling backlight</a></li>
 			<li><a href="#high_pitch_trisquel">High Pitched Whining Noise on Idle (how to remove in Trisquel)</a>
 				<ul>
 					<li><a href="#howtouse_powertop">Powertop - how to use</a></li>
@@ -1348,14 +1344,6 @@ EndSection
 		</p>
 
 		<p>
-			<b>
-				After the 2nd flash, if this is a ThinkPad X60 then you can look at <a href="#x60_wifi">#x60_wifi</a> for how to enable/disable wifi.
-				You can also look at <a href="#x60_trackpoint">#x60_trackpoint</a> for how to enable/disable the trackpoint (red mouse on keyboard).
-				You might want to do the 2nd flash first (see below) before doing that.
-			</b>
-		</p>
-
-		<p>
 			When you have booted up again:<br/>
 			<b>$ sudo ./lenovobios_secondflash bin/<a href="#rom">YOURBOARD/YOURROM</a></b>
 		</p>
@@ -1544,13 +1532,6 @@ EndSection
 				</b>
 			</p>
 
-			<p>
-				<b>
-					If this is a ThinkPad X60 then you can look at <a href="#x60_wifi">#x60_wifi</a> for how to enable/disable wifi.
-					You can also look at <a href="#x60_trackpoint">#x60_trackpoint</a> for how to enable/disable the trackpoint (red mouse on keyboard).
-				</b>
-			</p>
-
 		</div>
 
 		<p><a href="#pagetop">Back to top of page</a></p>
@@ -1632,92 +1613,6 @@ EndSection
 
 <hr/>
 
-	<h1 id="x60_wifi">ThinkPad X60: Enable or disable wifi</h1>
-		<p>
-			<a href="#build_dependencies">Install the build dependencies</a> and then build nvramtool.<br/>
-			nvramtool is in coreboot or libreboot source tree under util/:<br/>
-			<b>$ cd libreboot_src/coreboot/util/nvramtool</b><br/>
-			(nvramtool is also in libreboot_bin/nvramtool)<br/>
-			<b>$ make</b><br/>
-			Enable wifi:<br/>
-			<b>$ sudo ./nvramtool -w wlan=Enable</b><br/>
-			Disable wifi:<br/>
-			<b>$ sudo ./nvramtool -w wlan=Disable</b><br/>
-			If that doesn't work, try one of these instead:<br/>
-			<b>$ sudo ./nvramtool -y ../../src/mainboard/lenovo/x60/cmos.layout -w wlan=Enable</b><br/>
-			<b>$ sudo ./nvramtool -y ../../src/mainboard/lenovo/x60/cmos.layout -w wlan=Disable</b><br/>
-			If you are using libreboot_bin, do that instead:<br/>
-			<b>$ sudo ./nvramtool -y ../x60cmos.layout -w wlan=Enable</b><br/>
-			<b>$ sudo ./nvramtool -y ../x60cmos.layout -w wlan=Disable</b>
-		</p>
-		<p>The next time you boot, wifi will be enabled.</p>
-		<p><a href="#pagetop">Back to top of page</a></p>
-
-<hr/>
-
-	<h1 id="x60_bluetooth">ThinkPad X60: Enable or disable bluetooth</h1>
-		<p>
-			<a href="#build_dependencies">Install the build dependencies</a> and then build nvramtool.<br/>
-			nvramtool is in coreboot or libreboot source tree under util/:<br/>
-			<b>$ cd libreboot_src/coreboot/util/nvramtool</b><br/>
-			(nvramtool is also in libreboot_bin/nvramtool)<br/>
-			<b>$ make</b><br/>
-			Enable bluetooth:<br/>
-			<b>$ sudo ./nvramtool -w bluetooth=Enable</b><br/>
-			Disable bluetooth:<br/>
-			<b>$ sudo ./nvramtool -w bluetooth=Disable</b><br/>
-			If that doesn't work, try one of these instead:<br/>
-			<b>$ sudo ./nvramtool -y ../../src/mainboard/lenovo/x60/cmos.layout -w bluetooth=Enable</b><br/>
-			<b>$ sudo ./nvramtool -y ../../src/mainboard/lenovo/x60/cmos.layout -w bluetooth=Disable</b><br/>
-			If you are using libreboot_bin, do that instead:<br/>
-			<b>$ sudo ./nvramtool -y ../x60cmos.layout -w bluetooth=Enable</b><br/>
-			<b>$ sudo ./nvramtool -y ../x60cmos.layout -w bluetooth=Disable</b>
-		</p>
-		<p>The next time you boot, wifi will be enabled.</p>
-		<p><a href="#pagetop">Back to top of page</a></p>
-
-<hr/>
-
-	<h1 id="x60_trackpoint">ThinkPad X60: Enable or disable trackpoint</h1>
-		<p>
-			<a href="#build_dependencies">Install the build dependencies</a> and then build nvramtool.<br/>
-			nvramtool is in coreboot or libreboot source tree under util/:<br/>
-			<b>$ cd libreboot_src/coreboot/util/nvramtool</b><br/>
-			(nvramtool is also in libreboot_bin/nvramtool)<br/>
-			<b>$ make</b><br/>
-			Enable trackpoint:<br/>
-			<b>$ sudo ./nvramtool -w trackpoint=Enable</b><br/>
-			Disable trackpoint:<br/>
-			<b>$ sudo ./nvramtool -w trackpoint=Disable</b><br/>
-			If that doesn't work, try one of these instead:<br/>
-			<b>$ sudo ./nvramtool -y ../../src/mainboard/lenovo/x60/cmos.layout -w trackpoint=Enable</b><br/>
-			<b>$ sudo ./nvramtool -y ../../src/mainboard/lenovo/x60/cmos.layout -w trackpoint=Disable</b><br/>
-			If you are using libreboot_bin, do that instead:<br/>
-			<b>$ sudo ./nvramtool -y ../x60cmos.layout -w wlan=Enable</b><br/>
-			<b>$ sudo ./nvramtool -y ../x60cmos.layout -w wlan=Disable</b>
-		</p>
-		<p>The next time you boot, trackpoint will be enabled.</p>
-		<p><a href="#pagetop">Back to top of page</a></p>
-
-	<h1 id="x60_backlight">ThinkPad X60: Prevent scrolling backlight</h1>
-		<p>
-			<a href="#build_dependencies">Install the build dependencies</a> and then build nvramtool.<br/>
-			nvramtool is in coreboot or libreboot source tree under util/:<br/>
-			<b>$ cd libreboot_src/coreboot/util/nvramtool</b><br/>
-			(nvramtool is also in libreboot_bin/nvramtool)<br/>
-			<b>$ make</b><br/>
-			Set tft_brightness:<br/>
-			<b>$ sudo ./nvramtool -w tft_brightness=0xff</b><br/>
-			If that doesn't work, try one of these instead:<br/>
-			<b>$ sudo ./nvramtool -y ../../src/mainboard/lenovo/x60/cmos.layout -w tft_brightness=0xff</b><br/>
-			If you are using libreboot_bin, do that instead:<br/>
-			<b>$ sudo ./nvramtool -y ../x60cmos.layout -w tft_brightness=0xff</b>
-		</p>
-		<p>Change will apply the next time you boot.</p>
-		<p><a href="#pagetop">Back to top of page</a></p>
-
-<hr/>
-
 	<h1 id="high_pitch_trisquel">High Pitched Whining Noise on Idle (how to remove in Trisquel)</h1>
 
 		<p>