various fixes for r20150208

5 files changed, 20 insertions, 12 deletions

diff --git a/build-release b/build-release
index 43d2a65..2e8c006 100755
--- a/build-release
+++ b/build-release
@@ -331,8 +331,8 @@ cp coreboot/src/mainboard/apple/macbook21/cmos.layout libreboot_bin/macbook21cmo
 # FLASHING SCRIPTS
 # Flashrom script (makes flashing easier: ./flash path/to/libreboot.rom)
 cp flash libreboot_bin/
-# For those upgrading from libreboot 5th release (or lower) to latest, on the X60
-cp x60flashfrom5 libreboot_bin/
+# Brick-prone flashing script (for mismatching board names, when they change)
+cp forceflash libreboot_bin/
 # X60/T60: so that the user can use libreboot_bin to overwrite lenovo bios with libreboot
 cp lenovobios_firstflash libreboot_bin/
 cp lenovobios_secondflash libreboot_bin/
diff --git a/docs/install/images/x200/soic8.jpg b/docs/install/images/x200/soic8.jpg
new file mode 100644
index 0000000..ad0b2fb
--- /dev/null
+++ b/docs/install/images/x200/soic8.jpg
diff --git a/docs/install/index.html b/docs/install/index.html
index 60d9a73..97462fd 100644
--- a/docs/install/index.html
+++ b/docs/install/index.html
@@ -394,9 +394,11 @@
 				<b>$ sudo ./flash bin/<a href="#rom">YOURBOARD/YOURROM</a></b>
 			</p>
 			<p>
-				If you are flashing a ThinkPad X60 that is currently running libreboot 5th release or lower 
-				(anything on or before June 22nd 2014), then use this to upgrade:<br/>
-				<b>$ sudo ./x60flashfrom5 bin/<a href="#rom">YOURBOARD/YOURROM</a></b>
+				If you are sure that you are flashing the correct image but you get the error
+				<b>This coreboot image (LENOVO:ThinkPad X60) does not appear to be correct for the detected mainboard (Lenovo:ThinkPad X60 / X60s / X60t) or
+				similar (if it's a different board), then do</b>:
+				<br/>
+				<b>$ sudo ./forceflash bin/<a href="#rom">YOURBOARD/YOURROM</a></b>
 			</p>
 
 			<div class="important">
diff --git a/docs/install/x200_external.html b/docs/install/x200_external.html
index f990789..6922b90 100644
--- a/docs/install/x200_external.html
+++ b/docs/install/x200_external.html
@@ -94,6 +94,8 @@ POMONA 5250 (correlate with the BBB guide)
  3.3V PSU RED    -       - 17 - this is pin 1 on the flash chip. in front of it is the screen.
 ===  right side of the X200 (where the audio jacks are) ===
 <i>This is how you will connect. Numbers refer to pin numbers on the BBB, on the plugs near the DC jack.</i>
+Here is a photo of the SOIC-8 flash chip: <a href="images/x200/soic8.jpg" alt="freenode IRC #libreboot 01:42 UK/London timezone February 8th 2015: pehjota: fchmmr: Here are two photos in the camera's configured resolution; resize them as you wish: http://www.pehjota.net/~pj/x200/soic-8/.  License: CC BY-SA 3.0 or later.  If you want other angles or anything, let me know.">images/x200/soic8.jpg</a>
+(image copyright 2015 Patrick P.J. McDermott &lt;pj@pehjota.net&gt;, CC BY-SA 3.0 or later)
 </pre>
 			<p>
 				<b>On the X200S the flash chip is underneath the board, in a WSON package. 
@@ -101,6 +103,11 @@ POMONA 5250 (correlate with the BBB guide)
 				<a href="images/x200/wson_soldered.jpg">images/x200/wson_soldered.jpg</a> (image copyright (C) 2014 <a href="mailto:sgsit@libreboot.org">Steve Shenton</a> under CC-BY-SA 4.0
 				or higher, same license that this document uses) shows it wired (soldered) and
 				connected to a BBB.</b>
+				<br/>
+				In this image, a pin header was soldered onto the WSON. Another solution might be to de-solder the WSON-8 chip and put a SOIC-8 there instead.
+				Check the list of SOIC-8 flash chips at <a href="../hcl/x200_remove_me.html#flashchips">../hcl/x200_remove_me.html#flashchips</a> but
+				do note that these are only 4MiB (32Mb) chips. The only X200 SPI chips with 8MiB capacity are SOIC-8. For 8MiB capacity in this case,
+				the X201 SOIC-8 flash chip (Macronix 25L6445E) might work.
 			</p>
 
 			<h2>
diff --git a/x60flashfrom5 b/forceflash
index 60ce99b..64d4d68 100755
--- a/x60flashfrom5
+++ b/forceflash
@@ -1,8 +1,10 @@
 #!/bin/bash
 
-#  x60flashfrom5 script: for X60 owners upgrading from 5th release
+#  forceflash script - be very careful when using this, because it can flash
+#			the wrong ROM image on the wrong machine if you tell it to. YOU HAVE BEEN WARNED.
+#			This script is for re-flashing a new image for the same machine when the board name was changed
 #
-#	Copyright (C) 2014 Francis Rowe <info@gluglug.org.uk>
+#	Copyright (C) 2014, 2015 Francis Rowe <info@gluglug.org.uk>
 #
 #    This program is free software: you can redistribute it and/or modify
 #    it under the terms of the GNU General Public License as published by
@@ -27,8 +29,8 @@ if [[ $EUID -ne 0 ]]; then
    exit 1
 fi
 if (( $# != 1 )); then
-	echo "Usage: ./x60flashfrom5 yourrom.rom"
-	echo "usage: ./x60flashfrom5 path/to/yourrom.rom"
+	echo "Usage: ./forceflash yourrom.rom"
+	echo "usage: ./forceflash path/to/yourrom.rom"
 	echo "You need to specify exactly 1 file"
 	exit 1
 fi
@@ -37,9 +39,6 @@ if [ ! -f $1 ]; then
 	exit 1
 fi
 
-# boardmismatch=force is for people upgrading from libreboot 5th release, where the new ROM's are "ThinkPad X60 / X60s / X60t"
-# and the old ones are "ThinkPad X60 / X60s" and flashrom complains otherwise
-
 path="unknown"
 if [ -f "DEBLOB" ]; then
 	path="./flashrom/flashrom"