1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
|
From 3e2be2d88101331eedb59c1459630b553c7cb660 Mon Sep 17 00:00:00 2001
From: Timothy Pearson <tpearson@raptorengineeringinc.com>
Date: Sat, 17 Oct 2015 04:37:10 -0500
Subject: [PATCH 003/139] drivers/i2c/w83795: Add option to use auxiliary SMBUS
controller
Change-Id: I5a9b5eba992853b84b0cb6c3a1764edf42ac49b2
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
---
src/drivers/i2c/w83795/chip.h | 4 ++++
src/drivers/i2c/w83795/w83795.c | 14 ++++++++++++++
2 files changed, 18 insertions(+)
diff --git a/src/drivers/i2c/w83795/chip.h b/src/drivers/i2c/w83795/chip.h
index effe119..413ea87 100644
--- a/src/drivers/i2c/w83795/chip.h
+++ b/src/drivers/i2c/w83795/chip.h
@@ -139,4 +139,8 @@ struct drivers_i2c_w83795_config {
uint8_t fan6_duty; /* % of full speed (0-100) */
uint8_t fan7_duty; /* % of full speed (0-100) */
uint8_t fan8_duty; /* % of full speed (0-100) */
+
+ uint8_t smbus_aux; /* 0 == device located on first SMBUS,
+ * 1 == device located on auxiliary SMBUS
+ */
};
diff --git a/src/drivers/i2c/w83795/w83795.c b/src/drivers/i2c/w83795/w83795.c
index cf0cf2f..453e0af 100644
--- a/src/drivers/i2c/w83795/w83795.c
+++ b/src/drivers/i2c/w83795/w83795.c
@@ -141,7 +141,16 @@ static void w83795_init(struct device *dev, w83795_fan_mode_t mode, u8 dts_src)
uint8_t val;
uint16_t limit_value;
+#if IS_ENABLED(CONFIG_SMBUS_HAS_AUX)
+ uint8_t smbus_aux_prev = smbus_switched_to_aux();
+ smbus_switch_to_aux(config->smbus_aux);
+#endif
+
if (smbus_read_byte(dev, 0x00) < 0) {
+#if IS_ENABLED(CONFIG_SMBUS_HAS_AUX)
+ /* Restore SMBUS channel setting */
+ smbus_switch_to_aux(smbus_aux_prev);
+#endif
printk(BIOS_ERR, "W83795G/ADG Nuvoton H/W Monitor not found\n");
return;
}
@@ -325,6 +334,11 @@ static void w83795_init(struct device *dev, w83795_fan_mode_t mode, u8 dts_src)
val = w83795_read(dev, W83795_REG_CONFIG);
val |= W83795_REG_CONFIG_START;
w83795_write(dev, W83795_REG_CONFIG, val);
+
+#if IS_ENABLED(CONFIG_SMBUS_HAS_AUX)
+ /* Restore SMBUS channel setting */
+ smbus_switch_to_aux(smbus_aux_prev);
+#endif
}
static void w83795_hwm_init(struct device *dev)
--
1.9.1
|
