GM45 chipsets: remove the ME (manageability engine)

This sections relates to disabling and removing the ME (Intel Management Engine) on GM45. This was originally done on the ThinkPad X200, and later adapted for the ThinkPad R400/T400/T500. It can in principle be done on any GM45 or GS45 machine.

The ME is a blob that typically must be left inside the flash chip (in the ME region, as outlined by the default descriptor). On GM45, it is possible to remove it without any ill effects. All other parts of coreboot on GM45 machines (provided GMA MHD4500 / Intel graphics) can be blob-free, so removing the ME was the last obstacle to make GM45 a feasible target in libreboot (the machines can also work without the microcode blobs).

The ME is removed and disabled in libreboot by modifying the descriptor. More info about this can be found in the ich9deblob/ich9gen source code in resources/utilities/ich9deblob/ in libreboot, or more generally on this page.

Back to previous index.

ICH9 gen utility

It is no longer necessary to use ich9deblob to generate a deblobbed descriptor+gbe image for GM45 targets. ich9gen is a small utility within ich9deblob that can generate them from scratch, without a factory.bin dump.

Run:
$ ./ich9gen

Running ich9gen this way (without any arguments) generates a default descriptor+gbe image with a generic MAC address. You probably don't want to use the generic one; the ROM images in libreboot contain a descriptor+gbe image by default (already inserted) just to prevent or mitigate the risk of bricking your laptop, but with the generic MAC address (the libreboot project does not know what your real MAC address is).

On GM45 laptops that use flash descriptors, the MAC address or the onboard ethernet chipset is flashed (inside the ROM image). You should generate a descriptor+gbe image with your own MAC address inside (with the Gbe checksum updated to match). Run:
$ ./ich9gen --macaddress XX:XX:XX:XX:XX:XX
(replace the XX chars with the hexadecimal chars in the MAC address that you want)

Two new files will be created:

You can find out your MAC address from ip addr or ifconfig in GNU/Linux. Alternatively, if you are running libreboot already (with the correct MAC address in your ROM), dump it (flashrom -r) and read the first 6 bytes from position 0x1000 (or 0x2000) in a hex editor (or, rename it to factory.rom and run it in ich9deblob: in the newly created mkgbe.c will be the individual bytes of your MAC address). If you are currently running the stock firmware and haven't installed libreboot yet, you can also run that through ich9deblob to get the mac address.

An even simpler way to get the MAC address would be to read what's on the little sticker on the underside. (on the X200, this would be near the VGA port).

A bash script is also included in libreboot_util which will change the mac address (using ich9gen) on all GM45 ROM images. For instance:
$ ./ich9macchange path/to/libreboot.rom XX:XX:XX:XX:XX:XX romsize
romsize should be 4 or 8, depending on whether the ROM image is for a 4MiB or 8MiB flash chip.

ich9gen executables can be found under ./ich9deblob/ statically compiled in libreboot_util. If you are using src or git, build ich9gen from source with:
$ ./build module ich9deblob
The executable will appear under resources/utilities/ich9deblob/

Assuming that your libreboot image is named libreboot.rom, copy the file to where libreboot.rom is located and then run, for instance:
$ dd if=ich9fdgbe_8m.bin of=libreboot.rom bs=1 count=12k conv=notrunc
or:
$ dd if=ich9fdgbe_4m.bin of=libreboot.rom bs=1 count=12k conv=notrunc

Your libreboot.rom image is now ready to be flashed on the machine. Refer back to ../install/index.html#flashrom for how to flash it.

Write-protecting the flash chip

Look in resources/utilities/ich9deblob/src/descriptor/descript.c for the following lines in the descriptorHostRegionsUnlocked function:

   descriptorStruct.masterAccessSection.flMstr1.fdRegionWriteAccess = 0x1;
   descriptorStruct.masterAccessSection.flMstr1.biosRegionWriteAccess = 0x1;
   descriptorStruct.masterAccessSection.flMstr1.meRegionWriteAccess = 0x1;
   descriptorStruct.masterAccessSection.flMstr1.gbeRegionWriteAccess = 0x1;
   descriptorStruct.masterAccessSection.flMstr1.pdRegionWriteAccess = 0x1;

Change them all to 0x0, then re-compile ich9gen. After you have done that, follow the notes in #ich9gen to generate a new descriptor+gbe image and insert that into your ROM image, then flash it. The next time you boot, the flash chip will be ready-only in software (hardware re-flashing will still work, which you will need for re-flashing the chip after write-protecting it, to clear the write protection or to flash yet another ROM image with write protection set in the descriptor).

For external flashing guides, refer to ../install/index.html.

ICH9 deblob utility

This is no longer strictly necessary. Libreboot ROM images for GM45 machines now contain the 12KiB descriptor+gbe generated from ich9gen, by default.

This was the tool originally used to disable the ME on X200 (later adapted for other machines that use the GM45 chipset). ich9gen now supersedes it; ich9gen is better because it does not rely on dumping the factory.rom image (whereas, ich9deblob does).

This is what you will use to generate the deblobbed descriptor+gbe regions for your libreboot ROM image.

If you are working with libreboot_src (or git), you can find the source under resources/utilities/ich9deblob/ and will already be compiled if you ran ./build module all or ./build module ich9deblob from the main directory (./), otherwise you can build it like so:
$ ./build module ich9deblob
An executable file named ich9deblob will now appear under resources/utilities/ich9deblob/

If you are working with libreboot_util release archive, you can find the utility included, statically compiled (for i686 and x86_64 on GNU/Linux) under ./ich9deblob/.

Place the factory.rom from your machine (can be obtained using the external flashing guides for GM45 targets linked ../install/index.html) in the directory where you have your ich9deblob executable, then run the tool:
$ ./ich9deblob

A 12kiB file named deblobbed_descriptor.bin will now appear. Keep this and the factory.rom stored in a safe location! The first 4KiB contains the descriptor data region for your machine, and the next 8KiB contains the gbe region (config data for your gigabit NIC). These 2 regions could actually be separate files, but they are joined into 1 file in this case.

Assuming that your libreboot image is named libreboot.rom, copy the deblobbed_descriptor.bin file to where libreboot.rom is located and then run:
$ dd if=deblobbed_descriptor.bin of=libreboot.rom bs=1 count=12k conv=notrunc

The utility will also generate 4 additional files:

These are C source files that can re-generate the very same Gbe and Descriptor structs (from ich9deblob/ich9gen). To use these, place them in src/ich9gen/ in ich9deblob, then re-build. The newly built ich9gen executable will be able to re-create the very same 12KiB file from scratch, based on the C structs, this time without the need for a factory.rom dump!

You should now have a libreboot.rom image containing the correct 4K descriptor and 8K gbe regions, which will then be safe to flash. Refer back to ../install/index.html#flashrom for how to flash it.

The sections below are adapted from (mostly) IRC logs related to early development getting the ME removed on GM45. They are useful for background information. This could not have been done without sgsit's help.

Early notes

Flash chips

Early development notes


Start (hex)	End (hex)	Length (hex)	Area Name
-----------	---------	------------	---------
00000000	003FFFFF	00400000	Flash Image

00000000	00000FFF	00001000	Descriptor Region
00000004	0000000F	0000000C		Descriptor Map
00000010	0000001B	0000000C		Component Section
00000040	0000004F	00000010		Region Section
00000060	0000006B	0000000C		Master Access Section
00000060	00000063	00000004			CPU/BIOS
00000064	00000067	00000004			Manageability Engine (ME)
00000068	0000006B	00000004			GbE LAN
00000100	00000103	00000004		ICH Strap 0
00000104	00000107	00000004		ICH Strap 1
00000200	00000203	00000004		MCH Strap 0
00000EFC	00000EFF	00000004		Descriptor Map 2
00000ED0	00000EF7	00000028		ME VSCC Table
00000ED0	00000ED7	00000008			Flash device 1
00000ED8	00000EDF	00000008			Flash device 2
00000EE0	00000EE7	00000008			Flash device 3
00000EE8	00000EEF	00000008			Flash device 4
00000EF0	00000EF7	00000008			Flash device 5
00000F00	00000FFF	00000100		OEM Section
00001000	001F5FFF	001F5000	ME Region
001F6000	001F7FFF	00002000	GbE Region
001F8000	001FFFFF	00008000	PDR Region
00200000	003FFFFF	00200000	BIOS Region

Start (hex)	End (hex)	Length (hex)	Area Name
-----------	---------	------------	---------
00000000	003FFFFF	00400000	Flash Image

00000000	00000FFF	00001000	Descriptor Region
00000004	0000000F	0000000C		Descriptor Map
00000010	0000001B	0000000C		Component Section
00000040	0000004F	00000010		Region Section
00000060	0000006B	0000000C		Master Access Section
00000060	00000063	00000004			CPU/BIOS
00000064	00000067	00000004			Manageability Engine (ME)
00000068	0000006B	00000004			GbE LAN
00000100	00000103	00000004		ICH Strap 0
00000104	00000107	00000004		ICH Strap 1
00000200	00000203	00000004		MCH Strap 0
00000ED0	00000EF7	00000028		ME VSCC Table
00000ED0	00000ED7	00000008			Flash device 1
00000ED8	00000EDF	00000008			Flash device 2
00000EE0	00000EE7	00000008			Flash device 3
00000EE8	00000EEF	00000008			Flash device 4
00000EF0	00000EF7	00000008			Flash device 5
00000EFC	00000EFF	00000004		Descriptor Map 2
00000F00	00000FFF	00000100		OEM Section
00001000	00002FFF	00002000	GbE Region
00003000	00202FFF	00200000	BIOS Region

Build Settings
--------------
Flash Erase Size = 0x1000


It's a utility called 'Flash Image Tool' for ME 4.x that was used for this. You drag a complete image into in and the utility decomposes the various components, allowing you to set soft straps.

This tool is proprietary, for Windows only, but was used to deblob the X200. End justified means, and the utility is no longer needed since the ich9deblob utility (documented on this page) can now be used to create deblobbed descriptors.

GBE (gigabit ethernet) region in SPI flash

Of the 8K, about 95% is 0xFF. The data is the gbe region is fully documented in this public datasheet: http://www.intel.co.uk/content/dam/doc/application-note/i-o-controller-hub-9m-82567lf-lm-v-nvm-map-appl-note.pdf

The only actual content found was:


00  1F  1F  1F  1F  1F  00  08  FF  FF  83  10  FF  FF  FF  FF  
08  10  FF  FF  C3  10  EE  20  AA  17  F5  10  86  80  00  00  
01  0D  00  00  00  00  05  06  20  30  00  0A  00  00  8B  8D  
02  06  40  2B  43  00  00  00  F5  10  AD  BA  F5  10  BF  10  
AD  BA  CB  10  AD  BA  AD  BA  00  00  00  00  00  00  00  00  
00  00  00  00  00  00  00  00  00  00  00  00  00  00  00  00  
00  01  00  40  28  12  07  40  FF  FF  FF  FF  FF  FF  FF  FF  
FF  FF  FF  FF  FF  FF  FF  FF  FF  FF  FF  FF  FF  FF  D9  F0  
20  60  1F  00  02  00  13  00  00  80  1D  00  FF  00  16  00  
DD  CC  18  00  11  20  17  00  DD  DD  18  00  12  20  17  00  
00  80  1D  00  00  00  1F  

The first part is the MAC address set to all 0x1F. It's repeated haly way through the 8K area, and the rest is all 0xFF. This is all documented in the datasheet.

The GBe region starts at 0x20A000 bytes from the *end* of a factory image and is 0x2000 bytes long. In libreboot (deblobbed) the descriptor is set to put gbe directly after the initial 4K flash descriptor. So the first 4K of the ROM is the descriptor, and then the next 8K is the gbe region.

GBE region: change MAC address

According to the datasheet, it's supposed to add up to 0xBABA but can actually be others on the X200. https://communities.intel.com/community/wired/blog/2010/10/14/how-to-basic-eeprom-checksums

"One of those engineers loves classic rock music, so he selected 0xBABA"

In honour of the song Baba O'Reilly by The Who apparently. We're not making this stuff up...

0x3ABA, 0x34BA, 0x40BA and more have been observed in the main Gbe regions on the X200 factory.rom dumps. The checksums of the backup regions match BABA, however.

By default, the X200 (as shipped by Lenovo) actually has an invalid main gbe checksum. The backup gbe region is correct, and is what these machines default to. Basically, you should do what you need on the *backup* gbe region, and then correct the main one by copying from the backup.

Look at resources/utilities/ich9deblob/ich9deblob.c.

Flash descriptor region

http://www.intel.co.uk/content/dam/doc/datasheet/io-controller-hub-9-datasheet.pdf from page 850 onwards. This explains everything that is in the flash descriptor, which can be used to understand what libreboot is doing about modifying it.

How to deblob:

There's an interesting parameter called 'ME Alternate disable', which allows the ME to only handle hardware errata in the southbridge, but disables any other functionality. This is similar to the 'ignition' in the 5 series and higher but using the standard firmware instead of a small 128K version. Useless for libreboot, though.

To deblob GM45, you chop out the platform and ME regions and correct the addresses in flReg1-4. Then you set meDisable to 1 in ICHSTRAP0 and MCHSTRAP0.

How to patch the descriptor from the factory.rom dump

This means that libreboot's descriptor region will simply define the following regions:

The data in the descriptor region is little endian, and it represents bits 24:12 of the address (bits 12-24, written this way since bit 24 is nearer to left than bit 12 in the binary representation).

So, x << 12 = address

If it's in descriptor mode, then the first 4 bytes will be 5A A5 F0 0F.

platform data partition in boot flash (factory.rom / lenovo bios)

Basically useless for libreboot, since it appears to be a blob. Removing it didn't cause any issues in libreboot.

This is a 32K region from the factory image. It could be data (non-functional) that the original Lenovo BIOS used, but we don't know.

It has only a 448 byte fragment different from 0x00 or 0xFF.

Copyright © 2014, 2015 Francis Rowe <info@gluglug.org.uk>
This document is released under the Creative Commons Attribution-ShareAlike 4.0 International Public License and all future versions. A copy of the license can be found at ../license.txt.

This document is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See ../../license.txt for more information.