From 818db48b4fa355255a87f76ae27f65b8fe1a7160 Mon Sep 17 00:00:00 2001
From: Francis Rowe <info@gluglug.org.uk>
Date: Sat, 02 Jan 2016 12:15:14 -0500
Subject: grub.cfg: re-factor switching to grub.cfg to a function

---
(limited to 'resources/grub/config/menuentries')

diff --git a/resources/grub/config/menuentries/common.cfg b/resources/grub/config/menuentries/common.cfg
index b64b4de..ef0bbef 100644
--- a/resources/grub/config/menuentries/common.cfg
+++ b/resources/grub/config/menuentries/common.cfg
@@ -1,3 +1,14 @@
+function switch_to_grub_config {
+	set root="${1}"
+	#	a) Check possible file locations...
+	for p in boot/grub/libreboot_ grub/libreboot_ boot/grub/ grub/ boot/grub2 grub2/; do
+		if [ -f "/${p}grub.cfg" ]; then
+	#	b) And eventually try to load the config. Using ESC one can still exit and revert back to
+	#	   libreboot's menu.
+			configfile /${p}grub.cfg
+		fi
+	done
+}
 menuentry 'Load Operating System (incl. fully encrypted disks)  [o]' --hotkey='o' {
 
 # GRUB handles (almost) every possible disk setup, but only the location of /boot is actually important,
@@ -11,14 +22,10 @@ menuentry 'Load Operating System (incl. fully encrypted disks)  [o]' --hotkey='o
 	#	a) Try RAID first, they might be used (accross multiple (raw) devices)
 	#	b) Try MBR/GPT partitions at last, one might still conviniently uses a single partition
 
-	for d in md/0 ahci0 ahci1; do
-		# prompt user for passphrase if LUKS header is found
-		cryptomount ${d}
-	done
+	# prompt user for passphrase if LUKS header is found
+	for d in md/0 ahci0 ahci1; do 		cryptomount ${d}; done
 	for j in 1 2 3 4 5 6 7 8 9; do
-		for d in ahci0 ahci1; do
-			cryptomount "${d},${j}"
-		done
+		for d in ahci0 ahci1; do 			cryptomount "${d},${j}"; done
 	done
 
 	#   (This way, we only need to scan for encrypted data once while covering every possible disk setup,
@@ -27,29 +34,9 @@ menuentry 'Load Operating System (incl. fully encrypted disks)  [o]' --hotkey='o
 	# 2. Look for user config. If the above routine successfully decrypted a LUKS container, its content
 	#    will be searched before everything else for obvious reasons. Regardless of this, the devices'
 	#    hirachy stays the same.
-	for d in crypto0 md/0 ahci0 ahci1; do
-		set root="${d}"
-	#	a) Check possible file locations...
-		for p in boot/grub/libreboot_ grub/libreboot_ boot/grub/ grub/ boot/grub2 grub2/; do
-			if [ -f "/${p}grub.cfg" ]; then
-	#	b) And eventually try to load the config. Using ESC one can still exit and revert back to
-	#	   libreboot's menu.
-				configfile /${p}grub.cfg
-			fi
-		done
-	done
+	for d in crypto0 md/0 ahci0 ahci1; do 	switch_to_grub_config ${d}; done
 	for j in 1 2 3 4 5 6 7 8 9; do
-		for d in crypto0 ahci0 ahci1; do
-			set root="${d},${j}"
-		#	a) Check possible file locations...
-			for p in boot/grub/libreboot_ grub/libreboot_ boot/grub/ grub/ boot/grub2 grub2/; do
-				if [ -f "/${p}grub.cfg" ]; then
-		#	b) And eventually try to load the config. Using ESC one can still exit and revert back to
-		#	   libreboot's menu.
-					configfile /${p}grub.cfg
-				fi
-			done
-		done
+		for d in crypto0 ahci0 ahci1; do 	switch_to_grub_config "${d},${j}"; done
 	done
 
 	# prompt user for passphrase if LUKS header is found but try using external keyfiles first
@@ -63,20 +50,8 @@ menuentry 'Load Operating System (incl. fully encrypted disks)  [o]' --hotkey='o
 		cryptomount ${kf} ${d}
 	done
 	# 3. Do the same routine again, but for possibly decrypted data this time.
-	set root=crypto0
-	for p in boot/grub/libreboot_ grub/libreboot_ boot/grub/ grub/ boot/grub2 grub2/; do
-		if [ -f "/${p}grub.cfg" ]; then
-			configfile /${p}grub.cfg
-		fi
-	done
-	for j in 1 2 3 4 5 6 7 8 9; do
-		set root=crypto0
-		for p in boot/grub/libreboot_ grub/libreboot_ boot/grub/ grub/ boot/grub2 grub2/; do
-			if [ -f "/${p}grub.cfg" ]; then
-				configfile /${p}grub.cfg
-			fi
-		done
-	done
+	switch_to_grub_config crypto0
+	for j in 1 2 3 4 5 6 7 8 9; do switch_to_grub_config "crypto0,${j}"; done
 
 	# 3. Last resort, if none of the above succeeds, all you have is GRUB's shell
 	set root=ahci0,1
--
cgit v0.9.1