From fe169cfef2bd84d3d2995f3a039282dfe83d94dd Mon Sep 17 00:00:00 2001 From: Francis Rowe Date: Sun, 08 Feb 2015 20:18:56 -0500 Subject: New board: ThinkPad R400 support added to libreboot. --- (limited to 'docs/install/x200_external.html') diff --git a/docs/install/x200_external.html b/docs/install/x200_external.html index e353e24..d4f1a91 100644 --- a/docs/install/x200_external.html +++ b/docs/install/x200_external.html @@ -108,7 +108,7 @@ chip on those pins? connected to a BBB.
In this image, a pin header was soldered onto the WSON. Another solution might be to de-solder the WSON-8 chip and put a SOIC-8 there instead. - Check the list of SOIC-8 flash chips at ../hcl/x200_remove_me.html#flashchips but + Check the list of SOIC-8 flash chips at ../hcl/gm45_remove_me.html#flashchips but do note that these are only 4MiB (32Mb) chips. The only X200 SPI chips with 8MiB capacity are SOIC-16. For 8MiB capacity in this case, the X201 SOIC-8 flash chip (Macronix 25L6445E) might work.

@@ -167,10 +167,10 @@ Please specify which chip definition to use with the -c <chipname> option.

Information about the descriptor, gbe regions and how the ME was removed can be found in the notes linked at - ../hcl/x200_remove_me.html. Libreboot ROM images now include + ../hcl/gm45_remove_me.html. Libreboot ROM images now include the 12KiB descriptor+gbe by default, generated using ich9gen; however, do note that the MAC address in the Gbe region is generic. Follow the instructions at - ../hcl/x200_remove_me.html#ich9gen and do what it says to change the MAC address + ../hcl/gm45_remove_me.html#ich9gen and do what it says to change the MAC address inside your X200 ROM image, before flashing it.

-- cgit v0.9.1