From 620c2ce2355f7de772d3604b1bd6f6296da02582 Mon Sep 17 00:00:00 2001
From: Francis Rowe <info@gluglug.org.uk>
Date: Sat, 16 May 2015 08:50:49 -0400
Subject: docs/install/bbb_setup.html: re-add red colour reference for 5V

Colourblind people still have pinouts to fall back on, while
non-colourblind people will have an easier time just knowing
"avoid red". Everyone wins.
---
(limited to 'docs/install/bbb_setup.html')

diff --git a/docs/install/bbb_setup.html b/docs/install/bbb_setup.html
index 4aaa4f9..735812f 100644
--- a/docs/install/bbb_setup.html
+++ b/docs/install/bbb_setup.html
@@ -104,7 +104,7 @@
 			</p>
 			<p>
 				<b>DO **NOT** use pin 4, 6, do **NOT** use pin 19 or 20 (on a 20-pin ATX PSU), and
-				DO **NOT** use pin 21, 22 or 23 (on a 24-pin ATX PSU). These are 5V, and they **WILL**
+				DO **NOT** use pin 21, 22 or 23 (on a 24-pin ATX PSU). Those wires (the red ones) are 5V, and they **WILL**
 				kill your flash chip. ***NEVER*** supply more than 3.3V to your flash chip.
 				(that is, if it's a 3.3V flash chip. 5V and 1.8V SPI flash chips do exist, but they are rare. always
 				check what voltage your chip takes. most take 3.3V)</b>
--
cgit v0.9.1