From 9654748bcf8e19a72ebd8aa5abcd4e549c29a781 Mon Sep 17 00:00:00 2001 From: Francis Rowe Date: Sat, 27 Jun 2015 19:32:06 -0400 Subject: docs/hcl/kfsn4-dre.html: Re-order the sections --- (limited to 'docs/hcl') diff --git a/docs/hcl/kfsn4-dre.html b/docs/hcl/kfsn4-dre.html index 074380b..ba411ee 100644 --- a/docs/hcl/kfsn4-dre.html +++ b/docs/hcl/kfsn4-dre.html @@ -30,25 +30,41 @@

- Native graphics initialization exists (XGI Z9s) for this board. - Framebuffer- and text-mode both work. A serial port is also - available. + Flashing instructions can be found at ../install/index.html#flashrom

+ Back to previous index. +

+ + +
+

Form factor

+

+ These boards use the SSI EEB 3.61 form factor; make sure + that your case supports this. This form factor is similar + to E-ATX in that the size is identical, but the position of + the screws are different. +

+
+ +
+

Flash chips

+

These boards use LPC flash (not SPI), in a PLCC socket. The default flash size 1MiB (8Mbits), and can be upgraded to 2MiB (16Mbits). SST49LF080A is the default that the board uses. SST49LF016C is an example of a 2MiB (16Mbits) chip, which might work. It is believed that 2MiB (16Mbits) is the maximum size available for the flash chip.

+
+
+

Native graphics initialization

- Flashing instructions can be found at ../install/index.html#flashrom -

- -

- Back to previous index. + Native graphics initialization exists (XGI Z9s) for this board. + Framebuffer- and text-mode both work. A serial port is also + available.

@@ -63,16 +79,6 @@
-

Form factor

-

- These boards use the SSI EEB 3.61 form factor; make sure - that your case supports this. This form factor is similar - to E-ATX in that the size is identical, but the position of - the screws are different. -

-
- -

Current issues