From fe169cfef2bd84d3d2995f3a039282dfe83d94dd Mon Sep 17 00:00:00 2001 From: Francis Rowe Date: Sun, 08 Feb 2015 20:18:56 -0500 Subject: New board: ThinkPad R400 support added to libreboot. --- (limited to 'docs/hcl/x200_remove_me.html') diff --git a/docs/hcl/x200_remove_me.html b/docs/hcl/x200_remove_me.html deleted file mode 100644 index ae0a83f..0000000 --- a/docs/hcl/x200_remove_me.html +++ /dev/null @@ -1,525 +0,0 @@ - - - - - - - - - ThinkPad X200: remove the ME (manageability engine) - - - - -
- -

ThinkPad X200: remove the ME (manageability engine)

-

- This sections relates to disabling and removing the ME (Intel Management Engine) - on the ThinkPad X200. -

-

- The ME is a blob that typically must be left inside the flash chip (in the ME region, as outlined - by the default descriptor). On the X200, it is possible to remove it without any ill effects. All - other parts of coreboot on the X200 can be blob-free, so removing the ME was the last obstacle to - get X200 support in libreboot (the machine can also work without the microcode blobs). -

-

- The ME is removed and disabled in libreboot by modifying the descriptor. More info about - this can be found in the ich9deblob/ich9gen source code in resources/utilities/ich9deblob/ - in libreboot, or more generally on this page. -

-

- Back to main X200 compatibility page (x200.html). -

- -
- -
- -

ICH9 gen utility

- -

- This is no longer strictly necessary. Libreboot ROM images for X200 now - contain the 12KiB descriptor+gbe generated from ich9gen, by default. -

- -

- It is no longer necessary to use ich9deblob to generate - a deblobbed descriptor+gbe image for the X200. ich9gen is a small utility within - ich9deblob that can generate them from scratch, without a factory.bin dump. -

- -

- Run:
- $ ./ich9gen -

- -

- It is also possible to generate a descriptor+gbe image with your own MAC address - inside (with the Gbe checksum updated to match). Run:
- $ ./ich9gen --macaddress XX:XX:XX:XX:XX:XX
- (replace the XX chars with the hexadecimal chars in the MAC address that you want) -

- -

- You can find out your MAC address from ip addr or ifconfig in GNU/Linux. - Alternatively, if you are running libreboot already (with the correct MAC address in your - ROM), dump it (flashrom -r) and read the first 6 bytes from position 0x1000 (or 0x2000) in a hex editor - (or, rename it to factory.rom and run it in ich9deblob: in the newly created mkgbe.c - will be the individual bytes of your MAC address). If you are currently running the stock firmware - and haven't installed libreboot yet, you can also run that through ich9deblob to get the mac address. -

- -

- An even simpler way to get the MAC address would be to read what's on the little sticker on - the underside. (on the X200, this would be near the VGA port). -

- -

- A bash script is also included in libreboot which will change the mac address (using ich9gen) - on all X200 ROM images. For instance:
- $ ./ich9macchange XX:XX:XX:XX:XX:XX -

- -

- Two new files will be created: -

- - -

- ich9gen executables can be found under ./ich9deblob/ statically compiled in - libreboot_bin. If you are using src or git, build ich9gen from source with:
- $ ./builddeps-ich9deblob
- The executable will appear under resources/utilities/ich9deblob/ -

- -

- Assuming that your X200 libreboot image is named libreboot.rom, copy - the file to where libreboot.rom is located - and then run, for instance:
- $ dd if=ich9fdgbe_8m.bin of=libreboot.rom bs=1 count=12k conv=notrunc
- or:
- $ dd if=ich9fdgbe_4m.bin of=libreboot.rom bs=1 count=12k conv=notrunc -

- -

- Your X200 libreboot.rom image is now ready to be flashed on the machine. Refer back to - ../install/index.html#flashrom - for how to flash it. -

- -
- -
- -

ICH9 deblob utility

- -

- This is no longer strictly necessary. Libreboot ROM images for X200 now - contain the 12KiB descriptor+gbe generated from ich9gen, by default. -

- -

- This was the tool originally used to disable the ME on X200. ich9gen now supersedes it; - ich9gen is better because it does not rely on dumping the factory.rom image (whereas, ich9deblob does). -

- -

- This is what you will use to generate the deblobbed descriptor+gbe regions for your libreboot ROM image. -

-

- If you are working with libreboot_src (or git), you can find the source under resources/utilities/ich9deblob/ - and will already be compiled if you ran ./builddeps or ./builddeps-ich9deblob from the main directory (./), - otherwise you can build it like so:
- $ ./builddeps-ich9deblob
- An executable file named ich9deblob will now appear under resources/utilities/ich9deblob/ -

-

- If you are working with libreboot_bin release archive, you can find the utility included, statically compiled - (for i686 and x86_64 on GNU/Linux) under ./ich9deblob/. -

- -

- Place the factory.rom from your X200 - (can be obtained using the guide at ../install/x200_external.html) in - the directory where you have your ich9deblob executable, then run the tool:
- $ ./ich9deblob -

-

- A 12kiB file named deblobbed_descriptor.bin will now appear. Keep this and the factory.rom stored in a safe location! - The first 4KiB contains the descriptor data region for your machine, and the next 8KiB contains the gbe region (config data for your - gigabit NIC). These 2 regions could actually be separate files, but they are joined into 1 file in this case. -

- -

- Assuming that your X200 libreboot image is named libreboot.rom, copy - the deblobbed_descriptor.bin file to where libreboot.rom is located - and then run:
- $ dd if=deblobbed_descriptor.bin of=libreboot.rom bs=1 count=12k conv=notrunc -

- -

- The utility will also generate 4 additional files: -

- -

- These are C source files that can re-generate the very same Gbe and Descriptor structs - (from ich9deblob/ich9gen). To use these, place them in src/ich9gen/ in ich9deblob, then re-build. - The newly built ich9gen executable will be able to re-create the very same 12KiB file from scratch, - based on the C structs, this time without the need for a factory.rom dump! -

- -

- You should now have a libreboot.rom image containing the correct 4K descriptor and 8K gbe regions, which - will then be safe to flash. Refer back to ../install/index.html#flashrom - for how to flash it. -

- -
- -
- -

- The sections below are adapted from (mostly) IRC logs related to early development getting the ME removed on the X200. - They are useful for background information. This could not have been done without sgsit's help. -

- -
- -

Early notes

- - - -
- -
- -
- -
- -

Flash chips

- -
    -
  • - Schematics for X200 laptop: http://pdf.datasheetarchive.com/indexerfiles/Datasheets-USER/DSAUPLD00006075.pdf - - Page 20 and page 9 refer to SDA_HDO or SDA_HDOUT only on series 6 or higher chipsets. ICH9-M (X200) does it with a strap connected to GPIO33 pin (see IRC notes below)
    - - According to page 29, the X200 can have any of the following flash chips: -
      -
    • ATMEL AT26DF321-SU 72.26321.A01 - this is a 32Mb (4MiB) chip
      • -
    • MXIC (Macronix?) MX25L3205DM2I-12G 72.25325.A01 - another 32Mb (4MiB) chip
      • -
    • MXIC (Macronix?) MX25L6405DMI-12G 41R0820AA - this is a 64Mb (8MiB) chip
      • -
    • Winbond W25X64VSFIG 41R0820BA - another 64Mb (8MiB) chip
      • -
    - sgsit says that the X200s with the 64Mb flash chips are (probably) the ones with AMT (alongside the ME), whereas - the 32Mb chips contain only the ME. -
    • -
  • - Schematics for X200s laptop: http://pdf.datasheetarchive.com/indexerfiles/Datasheets-USER/DSAUPLD00006104.pdf. -
    • -
- -
- -
- -
- -

Early development notes

- -
-
-Start (hex)	End (hex)	Length (hex)	Area Name
------------	---------	------------	---------
-00000000	003FFFFF	00400000	Flash Image
-
-00000000	00000FFF	00001000	Descriptor Region
-00000004	0000000F	0000000C		Descriptor Map
-00000010	0000001B	0000000C		Component Section
-00000040	0000004F	00000010		Region Section
-00000060	0000006B	0000000C		Master Access Section
-00000060	00000063	00000004			CPU/BIOS
-00000064	00000067	00000004			Manageability Engine (ME)
-00000068	0000006B	00000004			GbE LAN
-00000100	00000103	00000004		ICH Strap 0
-00000104	00000107	00000004		ICH Strap 1
-00000200	00000203	00000004		MCH Strap 0
-00000EFC	00000EFF	00000004		Descriptor Map 2
-00000ED0	00000EF7	00000028		ME VSCC Table
-00000ED0	00000ED7	00000008			Flash device 1
-00000ED8	00000EDF	00000008			Flash device 2
-00000EE0	00000EE7	00000008			Flash device 3
-00000EE8	00000EEF	00000008			Flash device 4
-00000EF0	00000EF7	00000008			Flash device 5
-00000F00	00000FFF	00000100		OEM Section
-00001000	001F5FFF	001F5000	ME Region
-001F6000	001F7FFF	00002000	GbE Region
-001F8000	001FFFFF	00008000	PDR Region
-00200000	003FFFFF	00200000	BIOS Region
-
-Start (hex)	End (hex)	Length (hex)	Area Name
------------	---------	------------	---------
-00000000	003FFFFF	00400000	Flash Image
-
-00000000	00000FFF	00001000	Descriptor Region
-00000004	0000000F	0000000C		Descriptor Map
-00000010	0000001B	0000000C		Component Section
-00000040	0000004F	00000010		Region Section
-00000060	0000006B	0000000C		Master Access Section
-00000060	00000063	00000004			CPU/BIOS
-00000064	00000067	00000004			Manageability Engine (ME)
-00000068	0000006B	00000004			GbE LAN
-00000100	00000103	00000004		ICH Strap 0
-00000104	00000107	00000004		ICH Strap 1
-00000200	00000203	00000004		MCH Strap 0
-00000ED0	00000EF7	00000028		ME VSCC Table
-00000ED0	00000ED7	00000008			Flash device 1
-00000ED8	00000EDF	00000008			Flash device 2
-00000EE0	00000EE7	00000008			Flash device 3
-00000EE8	00000EEF	00000008			Flash device 4
-00000EF0	00000EF7	00000008			Flash device 5
-00000EFC	00000EFF	00000004		Descriptor Map 2
-00000F00	00000FFF	00000100		OEM Section
-00001000	00002FFF	00002000	GbE Region
-00003000	00202FFF	00200000	BIOS Region
-
-Build Settings
---------------
-Flash Erase Size = 0x1000
-
-
-
- -

- It's a utility called 'Flash Image Tool' for ME 4.x that was used for this. You drag a complete - image into in and the utility decomposes the various components, allowing you to set soft straps. -

-

- This tool is proprietary, for Windows only, but was used to deblob the X200. End justified means, and - the utility is no longer needed since the ich9deblob utility (documented on this page) can now be - used to create deblobbed descriptors. -

- -
- -
- -

- GBE (gigabit ethernet) region in SPI flash -

- -

- Of the 8K, about 95% is 0xFF. - The data is the gbe region is fully documented in this public datasheet: - http://www.intel.co.uk/content/dam/doc/application-note/i-o-controller-hub-9m-82567lf-lm-v-nvm-map-appl-note.pdf -

- -

- The only actual content found was: -

- -
-
-00  1F  1F  1F  1F  1F  00  08  FF  FF  83  10  FF  FF  FF  FF  
-08  10  FF  FF  C3  10  EE  20  AA  17  F5  10  86  80  00  00  
-01  0D  00  00  00  00  05  06  20  30  00  0A  00  00  8B  8D  
-02  06  40  2B  43  00  00  00  F5  10  AD  BA  F5  10  BF  10  
-AD  BA  CB  10  AD  BA  AD  BA  00  00  00  00  00  00  00  00  
-00  00  00  00  00  00  00  00  00  00  00  00  00  00  00  00  
-00  01  00  40  28  12  07  40  FF  FF  FF  FF  FF  FF  FF  FF  
-FF  FF  FF  FF  FF  FF  FF  FF  FF  FF  FF  FF  FF  FF  D9  F0  
-20  60  1F  00  02  00  13  00  00  80  1D  00  FF  00  16  00  
-DD  CC  18  00  11  20  17  00  DD  DD  18  00  12  20  17  00  
-00  80  1D  00  00  00  1F  
-
-
- -

- The first part is the MAC address set to all 0x1F. It's repeated haly way through - the 8K area, and the rest is all 0xFF. This is all documented in the datasheet. -

- -

- The GBe region starts at 0x20A000 bytes from the *end* of a factory image and is 0x2000 bytes long. - In libreboot (deblobbed) the descriptor is set to put gbe directly after the initial 4K flash descriptor. - So the first 4K of the ROM is the descriptor, and then the next 8K is the gbe region. -

- -
- -

GBE region: change MAC address

- -

- According to the datasheet, it's supposed to add up to 0xBABA but can actually be others on the X200. - https://communities.intel.com/community/wired/blog/2010/10/14/how-to-basic-eeprom-checksums -

-

- "One of those engineers loves classic rock music, so he selected 0xBABA" -

-

In honour of the song Baba O'Reilly by The Who apparently. We're not making this stuff up...

- -

- 0x3ABA, 0x34BA, 0x40BA and more have been observed in the main Gbe regions on the X200 factory.rom dumps. - The checksums of the backup regions match BABA, however. -

- -

- By default, the X200 (as shipped by Lenovo) actually has an invalid main gbe checksum. The backup gbe region is correct, - and is what these machines default to. Basically, you should do what you need on the *backup* gbe region, and - then correct the main one by copying from the backup. -

- -

- Look at resources/utilities/ich9deblob/ich9deblob.c. -

-
    -
  • Add the first 0x3F 16bit numbers (unsigned) of the GBe descriptor together (this includes the checksum value) - and that has to add up to 0xBABA. In other words, the checksum is 0xBABA minus the total of the first - 0x3E 16bit numbers (unsigned), ignoring any overflow.
    • -
- -
- -
- -
- -

Flash descriptor region

- -

- http://www.intel.co.uk/content/dam/doc/datasheet/io-controller-hub-9-datasheet.pdf - from page 850 onwards. This explains everything that is in the flash descriptor, which can be used to understand what libreboot - is doing about modifying it. -

- -

- How to deblob: -

- - -

- There's an interesting parameter called 'ME Alternate disable', which allows the ME to only handle hardware errata in the southbridge, - but disables any other functionality. This is similar to the 'ignition' in the 5 series and higher but using the standard firmware - instead of a small 128K version. Useless for libreboot, though. -

- -

- To deblob the x200, you chop out the platform and ME regions and correct the addresses in flReg1-4. - Then you set meDisable to 1 in ICHSTRAP0 and MCHSTRAP0. -

- -

How to patch the descriptor from the factory.rom dump

- - -

- This means that libreboot's descriptor region will simply define the following regions: -

- - -

- The data in the descriptor region is little endian, and it represents bits 24:12 of the address - (bits 12-24, written this way since bit 24 is nearer to left than bit 12 in the binary representation). -

-

- So, x << 12 = address -

-

- If it's in descriptor mode, then the first 4 bytes will be 5A A5 F0 0F. -

- -
- - -
- -

platform data partition in boot flash (factory.rom / lenovo bios)

- -

- Basically useless for libreboot, since it appears to be a blob. - Removing it didn't cause any issues in libreboot. -

-

- This is a 32K region from the factory image. It could be data - (non-functional) that the original Lenovo BIOS used, but we don't know. -

- -

- It has only a 448 byte fragment different from 0x00 or 0xFF. -

- -
- -
- -

- Copyright © 2014, 2015 Francis Rowe <info@gluglug.org.uk>
- This document is released under the Creative Commons Attribution-ShareAlike 4.0 International Public License and all future versions. - A copy of the license can be found at ../license.txt. -

- -

- This document is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See ../../license.txt for more information. -

- -
- - - -- cgit v0.9.1